EHD 1801 - Drill Eibenstock - Free user manual and instructions
Find the device manual for free EHD 1801 Eibenstock in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rotary Hammer Drill |
| Model | EHD 1801 |
| Brand | Eibenstock |
| Power Input | 1800 W |
| Voltage | 220–240 V, 50/60 Hz |
| Impact Energy | 10 J |
| No-Load Speed | 150–300 rpm (variable) |
| Impact Frequency | 2000–4000 bpm |
| Max Drilling Capacity (Concrete) | 50 mm |
| Max Drilling Capacity (Steel) | 13 mm |
| Max Drilling Capacity (Wood) | 50 mm |
| Tool Holder | SDS-Max |
| Weight | 6.5 kg |
| Dimensions (L x W x H) | 450 x 110 x 250 mm |
| Power Cord Length | 4 m |
| Protection Class | Class II (Double Insulated) |
| Vibration Level | 14 m/s² |
| Sound Pressure Level | 95 dB(A) |
| Operating Mode | Rotary only, Hammer only, Rotary + Hammer |
| Integrated Features | Variable speed trigger, depth stop, auxiliary handle |
Frequently Asked Questions - EHD 1801 Eibenstock
How do I change the operating mode on the EHD 1801?
Use the mode selector switch on the top of the drill. You can choose between rotary only for drilling wood/metal, hammer only for chiseling, and rotary + hammer for concrete.
What type of bits does the EHD 1801 use?
It uses SDS-Max shank bits. Ensure the bit is fully inserted into the chuck and locked in place.
How do I adjust the speed on the EHD 1801?
The variable speed trigger allows you to control the speed by varying pressure. For precise drilling, gently squeeze the trigger; for full power, press it fully.
What is the maximum drilling capacity in concrete?
The EHD 1801 can drill up to 50 mm diameter in concrete using core bits, and up to 32 mm with solid bits.
How do I replace the carbon brushes?
Disconnect the drill from power. Remove the brush caps on each side of the motor housing using a screwdriver. Slide out the worn brushes and insert new ones. Ensure they sit snugly and replace the caps.
Why is my drill not starting?
Check the power cord and plug for damage. Verify the carbon brushes are not worn out. If the drill still doesn't start, the switch or motor may require service.
How do I clean and maintain the EHD 1801?
After use, wipe the drill with a dry cloth. Keep ventilation slots clear of dust. Regularly check and clean the SDS-Max chuck with compressed air. Lubricate the chuck mechanism if needed.
What safety precautions should I take?
Always wear safety goggles, ear protection, and a dust mask. Use the auxiliary handle for better control. Never force the drill; let it work at its own pace. Keep the cord away from rotating parts.
Can I use the drill for chiseling?
Yes, switch to hammer only mode and use an SDS-Max chisel bit. Ensure the chisel is properly locked. Always hold the drill firmly with both hands.
Where can I find replacement parts?
Contact Eibenstock authorized dealers or visit the official website. Common parts include carbon brushes, chuck, and power cord. Use only genuine parts.
User questions about EHD 1801 Eibenstock
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual EHD 1801 - Eibenstock and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EHD 1801 by Eibenstock.
USER MANUAL EHD 1801 Eibenstock
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eibenstock
Model : EHD 1801
Category : Drill