12K031 - Compressor NEO tools - Free user manual and instructions
Find the device manual for free 12K031 NEO tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Portable air compressor |
| Brand | NEO tools |
| Model | 12K031 |
| Power supply | 230 V - 50 Hz |
| Motor power | 1.5 kW |
| Maximum pressure | 8 bar |
| Air flow (at 6.3 bar) | 100 L/min |
| Tank volume | 24 litres |
| Dimensions (L × W × H) | 40 × 30 × 30 cm |
| Weight | 15 kg |
| Noise level | 85 dB(A) |
| Lubrication type | Oil |
| Oil capacity | 0.3 litre |
| Thermal protection | Yes, automatic shutdown |
| Safety valve | Yes, integrated |
| Main functions | Inflation, painting, pneumatic tools |
| Routine maintenance | Drain tank and change oil every 50 hours |
| Repairability | Spare parts available on request |
Frequently Asked Questions - 12K031 NEO tools
How to start the NEO tools 12K031 compressor?
Make sure the switch is on OFF, plug the device into a 230V outlet, then move the switch to ON. Wait for the motor to reach its speed before using the tool.
What is the maximum allowed pressure?
The maximum pressure is 8 bar (116 psi). Never exceed this value. The compressor stops automatically at 8 bar and restarts at about 6.5 bar.
How to drain the air tank?
Unplug the device, open the drain valve located at the bottom of the tank to remove condensation. Leave the tank empty when not in use.
What type of oil to use and how to change it?
Use a special compressor oil SAE 30 or 40. Change the oil after the first 50 hours, then every 200 hours. The drain plug is located on the motor housing.
The compressor does not start, what to do?
Check the power supply, oil level, and if the pressure switch is properly adjusted. If the problem persists, contact after-sales service.
What accessories are compatible?
The compressor accepts standard quick couplings (1/4" BSP). You can use inflation guns, impact wrenches, sandblasting tools, etc.
Is the noise level high?
Yes, the compressor emits about 85 dB(A). It is recommended to wear hearing protection when using it.
Can I use the compressor continuously?
Yes, but respect the on/off cycles. The compressor is designed for intermittent use (e.g., 10 min run, 10 min rest). Let it cool down in case of prolonged use.
How to adjust the output pressure?
Turn the pressure regulator knob clockwise to increase pressure and counterclockwise to decrease it. Refer to the manual for precise adjustments.
Where to find spare parts?
Spare parts are available from NEO tools after-sales service or on the official website. Please indicate model 12K031 when ordering.
User questions about 12K031 NEO tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual 12K031 - NEO tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 12K031 by NEO tools.
USER MANUAL 12K031 NEO tools
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NEO tools
Model : 12K031
Category : Compressor