Dazzler FX - Effect machine ColorKey - Free user manual and instructions
Find the device manual for free Dazzler FX ColorKey in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog Machine |
| Brand | ColorKey |
| Model | Dazzler FX |
| Dimensions (L x W x H) | 400 x 300 x 200 mm |
| Weight | 5.0 kg |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 1000 W |
| Fog Output | Approx. 5000 cu.ft/min |
| Fluid Tank Capacity | 1.5 L |
| Warm-up Time | 3 minutes |
| Control Methods | Manual, Remote Control, DMX |
| DMX Channels | 1 or 3 channels |
| Operating Temperature Range | 5°C to 40°C |
| Fluid Type | Water-based fog fluid |
| Maintenance | Clean filter monthly; descale every 3 months |
| Safety Features | Thermal cutoff, low fluid shutdown |
| Included Accessories | Remote control, DMX cable, power cord |
| Warranty | 1 year |
Frequently Asked Questions - Dazzler FX ColorKey
How do I set up the Dazzler FX for the first time?
Unbox the machine, place it on a stable surface, fill the tank with water-based fog fluid, plug into a power outlet, and allow 3 minutes to warm up. Then press the manual button or use the remote.
What type of fluid should I use?
Only use ColorKey approved water-based fog fluid or a high-quality equivalent. Using oil-based fluids will damage the machine and void the warranty.
How long does the fluid last?
At full output, the 1.5L tank lasts approximately 40 minutes of continuous use. Output can be optimized via DMX or remote to conserve fluid.
Can I control the Dazzler FX via DMX?
Yes, the machine supports DMX512 protocol with selectable 1 or 3 channel modes. Use a standard DMX controller to adjust fog output and fan speed.
Why is the fog machine not producing fog?
Check for low fluid, insufficient warm-up time (3 min), or a tripped thermal cutoff. Ensure the power cord is securely connected and the breaker hasn't tripped.
How often should I clean the Dazzler FX?
Clean the air filter monthly. Descale the heating element every 3 months using a vinegar/water solution to prevent mineral buildup.
What is the maximum operating temperature?
The Dazzler FX is designed for indoor use between 5°C and 40°C (41°F to 104°F). Avoid using in extreme heat or cold to maintain performance.
Can I use the machine outdoors?
Outdoor use is possible in sheltered areas away from wind and precipitation. Wind disperses fog quickly, so use in calm conditions for best effect.
How do I store the machine after use?
Allow the machine to cool completely. Empty the fluid tank and run a brief cycle with clean water to clear the pump. Store in a dry, dust-free location.
What does the thermal cutoff do?
If the heating element exceeds safe temperature, the thermal cutoff automatically shuts off power to prevent fire hazard. Reset by unplugging for 10 minutes and allowing the machine to cool.
User questions about Dazzler FX ColorKey
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Dazzler FX - ColorKey and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Dazzler FX by ColorKey.
USER MANUAL Dazzler FX ColorKey
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ColorKey
Model : Dazzler FX
Category : Effect machine