KATHREIN

UFX 150/4 - Antenna KATHREIN - Free user manual and instructions

Find the device manual for free UFX 150/4 KATHREIN in PDF.

📄 53 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice KATHREIN UFX 150/4 - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeUHF TV Antenna
BrandKathrein
ModelUFX 150/4
Frequency Range470 - 862 MHz (UHF)
Gain15 dBi
PolarizationHorizontal
Impedance75 Ohm
Dimensions (L x W x H)1200 x 150 x 80 mm
Weight2.5 kg
MaterialAluminum (painted)
Mounting TypeMast mount (Ø 30-60 mm)
Connector TypeF-type (female)
Operating Temperature-30°C to +60°C
Weather ResistanceIP54 rated
Pre-amplifierIntegrated (optional)
Power Supply12 V DC via coax injector
Current Consumption60 mA
Number of Elements4
Beam Angle45°
Front-to-Back Ratio>20 dB
CertificationsCE, RoHS
Warranty2 years

Frequently Asked Questions - UFX 150/4 KATHREIN

How do I install the Kathrein UFX 150/4 antenna?
Mount the antenna on a mast using the provided clamps. Connect an F-type cable from the antenna to your TV or receiver. If using the integrated preamplifier, power it via a coaxial injector (12 V DC). Orient the antenna toward the nearest transmitter tower for optimal reception.
What is the frequency range of the UFX 150/4?
It operates in the UHF band from 470 MHz to 862 MHz, suitable for digital terrestrial television (DVB-T/T2).
Can I use this antenna indoors?
The UFX 150/4 is designed for outdoor use. Indoor use may result in reduced performance due to signal attenuation from walls. For indoor use, consider a smaller indoor antenna.
How do I connect the antenna to my TV?
Use a 75 Ohm coaxial cable with F-type connectors. Plug one end into the antenna and the other into your TV's antenna input. If the antenna has an integrated preamp, connect the injector between the cable and TV and plug it into a power outlet.
Does the UFX 150/4 require a preamplifier?
It has an optional integrated preamplifier. In strong signal areas, you may not need it. In weak signal areas, enable the preamp by connecting the power injector.
What cable type should I use?
Use a high-quality 75 Ohm coaxial cable, such as RG-6 or RG-11, with F-type connectors. Keep cable runs as short as possible to minimize signal loss.
How should I align the antenna?
Point the antenna towards the nearest TV broadcast tower. Use a compass or a signal meter app on your phone to find the direction. Rotate the antenna slowly and check signal strength on your TV until you achieve the best reception.
Is the antenna weatherproof?
Yes, it is rated IP54, meaning it is protected against dust and splashing water. It can withstand typical outdoor conditions, but it is recommended to seal all connections with weatherproof tape.
What is the warranty period?
Kathrein offers a 2-year warranty from the date of purchase. Keep your receipt as proof of purchase for any claims.
How do I maintain the antenna?
Periodically check for physical damage, loose connections, and corrosion. Clean the antenna elements gently with a damp cloth. Ensure that the mast remains secure. After strong storms, inspect the antenna and tighten any loose parts.

User questions about UFX 150/4 KATHREIN

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Antenna in PDF format for free! Find your manual UFX 150/4 - KATHREIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UFX 150/4 by KATHREIN.

USER MANUAL UFX 150/4 KATHREIN

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : KATHREIN

Model : UFX 150/4

Category : Antenna