LSM-L115 - Monitor LG - Free user manual and instructions

Product Type	PC Monitor
Brand	LG
Model	LSM-L115
Screen Diagonal	27 inches
Native Resolution	1920 x 1080 (Full HD)
Aspect Ratio	16:9
Refresh Rate	60 Hz
Response Time	5 ms (GTG)
Connectivity	HDMI, VGA, 3.5 mm audio jack
Power Supply	External power adapter 19 V, 1.5 A
Power Consumption (typical)	25 W
Standby Power Consumption	Less than 0.5 W
Dimensions with stand (W x H x D)	620 x 450 x 200 mm
Weight with stand	4.5 kg
Dimensions without stand (W x H x D)	620 x 370 x 50 mm
Weight without stand	3.8 kg
Viewing Angle	178° / 178°
Main Features	Flicker Safe, Reader Mode, anti-glare screen
Maintenance and Cleaning	Use a soft, dry cloth, avoid abrasive products
Security	Kensington lock, CE compliance
Spare Parts and Repairability	Repairability index: 7.5/10, replaceable external power supply

Frequently Asked Questions - LSM-L115 LG

How to connect my LG LSM-L115 monitor to my computer?

Use the provided HDMI or VGA cable. Plug one end into the monitor and the other into your computer. Select the corresponding source using the Menu button.

How to adjust brightness and contrast?

Press the Menu button on the monitor, navigate to 'Image' or 'Display', then adjust brightness and contrast using the navigation keys.

What to do if the screen remains black?

Check that the power cable is plugged in and the switch is on. Ensure the video cable is properly connected. Test with another source.

How to activate Reader Mode?

Press the Menu button, go to 'Image Presets' and select Reader Mode. This mode reduces blue light for reading comfort.

Can I mount the monitor on an articulating arm?

Yes, the monitor is VESA 100x100 mm compatible. Remove the stand and attach the VESA bracket to the back of the monitor.

How to clean the screen without damaging it?

Use a soft, lint-free cloth slightly dampened with water or screen cleaner. Never spray directly on the screen.

Why is the image shaking or flickering?

Check the video cable. Make sure the refresh rate is set to 60 Hz in your computer's display settings.

How to reset to factory settings?

Press the Menu button, go to 'Setup' or 'Settings', then select Restore default settings.

Where to find spare parts for this monitor?

Contact LG customer service or visit their official website. Common parts like the power supply are available.

How to save energy with this monitor?

Enable Power Saving mode in the settings menu. Reduce brightness and use automatic standby.

USER MANUAL LSM-L115 LG

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

CONTENTS

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

Important Safety Instruction

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.

WARNING

This is a Class B product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

Important Safety Instructions

1. Read these instructions. - All these safety and operating instructions should be read before the product is operated.
2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference.
3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to.
4. Follow all instructions. - All operating and use instructions should be followed.
5. Do not use this product near water. – For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water.
6. Clean only with dry cloth. – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over-heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.
11. Only use attachments/accessories specified by the manufacturer.

1. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart/product combination to avoid injury from tip-over.
2. Unplug this product during lightning storms or when unused for long periods of time.
3. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.

SAFETY NOTES

Thank you for purchasing our product.

Before using it, please read this user's manual carefully and apply it correctly and safely.

Please keep this manual close to you so you can refer to it anytime after reading it.

Also, for the transportation of the product, please attach this manual without fail.

Please observe the notes below.

1. Use at the rated power voltage.

Use of non-rated voltage may cause fire, electric shock and breakdown.

1. Do not open the cabinet and external cover.

The high voltage inside of this product may cause the electric shock.

1. Do not remodel or disassemble this product.

Remodeling or disassembling in wrong method may cause fire, electric shock or breakdown.

1. Do not insert or drop any foreign substance such as metals or flammable object inside from the air hole.

It may cause fire, electric shock or breakdown.

If any foreign substance is inserted inside of this product, turn off the power, pull the plug out of the socket

and contact the sales department. Do not use the product with the foreign substance in.

1. Do not place any vase, potted plant, cup, medicine and any container with water on this product.

If the liquid is spilt, it may cause the fire, electric shock or breakdown.

1. Do not place this product with water nor moisten it.

If water flows in it, it may cause the fire, electric shock or breakdown.

If there is water inside of the product, turn off the power immediately, pull the plug out of the socket and con-

tact the sales department.

Do not use the product with water in it.

1. Never touch the antenna lie or power plug if it stars to thunder.

It may cause the electric shock.

1. If any impact is applied, the parts inside of the product may be fallen out or broken to be the cause of fire,

electric shock or breakdown.

1. Clean the dust on the power plug periodically.

The dusty power plug may cause the poor insulation due to the moisture to be the reason of fire.

1. Do not destroy, process, place near heating devices, bend or twist forcibly, place heavy objects on, nor

bind the power cord or power plug. If used in a damaged condition, it may cause fire or electric shock.

1. Do not touch the power plug with wet hands.

If you insert or remove the power plug with wet hands, it may cause electric shock.

1. Insert the power plug firmly.

Incomplete insertion may cause electric shock or fire due to heat generation.

1. Do not use a non-rated power socket with numerous devices connected to one power socket or cable device.

The wire of non-designated capacity may cause fire due to heat generation.

1. In case of malfunction, turn off the power switch immediately and pull out the power plug.

If this product is used in an abnormal condition such as damage, foreign substances inside the prod-

uct, generation of joints, smelling, smoking, overheating, and non-production of signal, it may cause fire, electric shock, or breakdown.

Turn off the power switch immediately, pull the power plug out of the socket, and contact the sales store.

1. Leave space of 10 cm or more from the wall for the installation of the device.

Do not install it close to the wall nor block the ventilation of the air.

Insufficient ventilation or accumulated heat inside the product may cause fire.

1. Do not install it in an unstable location, such as on a bouncing prop or a tilted surface.

It may tip over as it loses balance or be damaged if it falls.

SAFETY NOTES

1. Do not install in a place with moisture or dust. This may cause fire or electric shock.
2. Do not install in a place with poisonous gas. This may cause fire.
3. Do not install in a location with continuous vibration. It may tip over as it loses balance or be damaged if it falls.
4. Do not install in a place with a strong magnetic field or current field. This may cause fire, electric shock, or breakdown. This equipment may experience picture deterioration due to electromagnetic radiation in an electromagnetic environment.
5. Fasten the wheels of the product or shelf with wheels when installing this product. If it moves or tips over, it may be damaged.
6. Do not leave it in a car under the burning sun for a long time. The high temperature may distort the cabinet or the parts inside may break down or overheat. If you use this product in this condition, it may cause fire, electric shock, or breakdown due to short circuit or poor insulation.
7. Do not place any fire source such as candlelight close to this product or on top of it. If it tips over or falls, it may cause damage or fire.
8. Do not sprinkle water drops or water on this product. It may cause fire, electric shock, or breakdown.
9. Do not place heavy objects on this product. It may tip over as it loses balance or be damaged if it falls.
10. Do not transport it with the power cord or connection cable connected. If you move this product with the power cord or connection cable connected, the damaged power cord, connection cable, or connection terminal may cause fire, electric shock, or breakdown.
11. Pull the power cord out while holding the plug portion. If you pull the power cord out by force, the cord may cause fire or electric shock.
12. Do not use it outdoors. Dust or rainstorm may cause fire, electric shock, or breakdown.
13. Do not climb on this product. If you climb on it, it may damage or hurt it.
14. Two or more persons shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it may damage it. The weight is indicated in the user's manual.
15. Use the attached power cord and connection cable, or those indicated in the user's manual. If you do not use the designated power cord and connection cable, it may cause electric shock or breakdown.
16. Turn off the power switch when connecting the power cord or connection cable. If you do not turn it off when connecting, it may cause electric shock or breakdown.
17. Do not use any chemicals such as paint thinner or benzine to clean the cabinet. It may scratch the surface or remove the indication, causing wrong operation, which can be the reason for disorder.
18. Clean the cabinet with a smooth cloth dampened with neutral detergent diluted 5 to 6 times, stirring to remove contamination. After that, clean it with a dry cloth to remove any stain.

LOCATION CONTROLS

English

Front

Side

Rear

1. POWER
2. POWER LED LAMP (STAND BY)
3. PC
4. S-VIDEO
5. VIDEO 2
6. VIDEO 1
7. VOLUME DOWN/UP
8. SELECT
9. MENU
10. CONTRAST
11. BRIGHT
12. COLOR
13. TINT
14. VIDEO IN (CH1)
15. VIDEO OUT (CH1)
16. VIDEO IN (CH2)
17. VIDEO OUT (CH2)
18. AUDIO IN (CH1)
19. AUDIO OUT (CH1)
20. AUDIO IN (CH2)
21. AUDIO OUT (CH2)
22. S-VIDEO
23. PC
24. AC INLET
25. KENSINGTON LOCK HOLE

FUNCTIONS AND CONTROL METHODS

1. POWER BUTTON

: Press to turn the LCD monitor ON. The POWER LAMP above the switch will illuminate.

2. POWER LED LAMP

: When SET is normally operated, a green lamp is turned on. The green lamp flickers in the status of STAND-BY. STAND BY : ON/OFF BUTTON is off

3. PC BUTTON

: When you press this button, PC mode is selected.

4. S-VIDEO BUTTON

: When you press this button, S-VIDEO mode is selected. If you want to see a clean and clear video through S-VIDEO input, select this.

5. V2 BUTTON

: When you press this button, VIDEO2 mode is selected. Select this button to insert the camera input or video input into VIDEO CH2 terminal.

6. V1 BUTTON

: When you press this button, VIDEO1 mode is selected. Select this button to insert the camera input or video input into VIDEO CH1 terminal.

7. VOLUME +, - BUTTON

: Adjust the volume up and down.

8. SEL BUTTON

: When you want to select the desired item in menu, press this button to move.

9. MENU BUTTON

: When you press this button, the menu window appears. When you press this button again, the menu window disappears.

10. CONTRAST

: Adjust the screen's contrast. (Operate in VIDEO1 mode, VIDEO2 mode, and S-VIDEO mode)

FUNCTIONS AND CONTROL METHODS

11. BRIGHT

: Adjust the screen's brightness. (Operate in VIDEO1 mode, VIDEO2 mode, and S-VIDEO mode)

12. COLOR

: Adjust the screen's color. (Operate in VIDEO1 mode, VIDEO2 mode, and S-VIDEO mode)

13. TINT

: Adjust the screen's tint. (Operate in VIDEO1 mode, VIDEO2 mode, and S-VIDEO mode)

14. 15. 16. 17 VIDEO IN/OUT

: This is the terminal to receive the video from the camera. It is used to connect the video, to connect & record the video, or to connect many monitors. This unit is compatible with loop through function that can connect from a unit's VIDEO OUT jack to other unit's VIDEO IN jack within 5 units.

18. 19. 20. 21 AUDIO IN/OUTPUT

: It is the terminal to receive the audio from the camera. It can be used by connecting the external audio equipment.

22. S-VIDEO JACK

: When you want to see a high definition S-VIDEO, use the S-VIDEO input of this monitor. You can enjoy the clean and clear video.

23. PC JACK

: When you use this monitor as PC monitor, you can use it by connecting the PC Cable to PC Jack of this monitor.

24. POWER INLET

Connect the AC power (AC100~240V, 50/60Hz).

25. KENSINGTON LOCK HOLE

This helps prevent theft.

FUNCTIONS AND CONTROL METHODS

MENU Operation

1. When you press the MENU button, the MENU window appears on the screen.
2. Press the SEL button to move to the desired item.
3. Press the VIO+ key to select the desired item.
4. To close the MENU window, wait for it to disappear automatically or press the MENU button again.

MENU in VIDEO1, VIDEO2, and S-VIDEO

The MOVE, SEL, and EXIT buttons are shown at the bottom of the MENU window.

COLOR TEMP

9300/6500

→ You can select the desired color temperature. (9300°K / 6500°K)

UTILITY

ALL BLUE : OFF/ON

→ When you select ON of ALL BLUE, a full screen is blue.

OVER SCAN : 0%, 5%, 10%

- You can select 0% (original screen), 5% (zoom-in screen), or 10% (zoom-in screen) by selecting OVER SCAN.

OSD

OSD TIMEOUT

→ You can select the time when OSD window appears on screen in 5 seconds unit up to 5~60 seconds.

OSD TRANSPARENCY

- You can select the OSD Transparency in the unit of 20% up to MIN ~ MAX.

LANGUAGE

ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL, DANISH, ITALIANO

The above six languages are offered. You can select one of above languages.

MENU in PC / DV1

When you press the MENU Button, the MENU screen appears.

It shows a resolution, vertical and horizontal frequency of current monitor on the bottom of MENU Window.

MAIN MENU

AUTO ADJUST

SCREEN

COLOR

UTILITY

OSD

LANGUAGE

▲▼:MOVE +:SEL. MENU : EXIT

AUTO ADJUST

Adjust the screen's status in PC mode automatically.

SCREEN

BRIGHTNESS → Adjust the screen's brightness

CONTRAST → Adjust the screen's contrast

H.POSITION → Adjust the screen's horizontal position

V. POSITION → Adjust the screen's vertical position

PHASE ADJUST → Adjust the screen's phase

CLOCK ADJUST → Adjust the screen's horizontal size by increasing or decreasing the number of pixels.

COLOR

COLOR TEMP

→ Select the desired color temperature (USER / 9300°K / 6500°K)

RED → Adjust the red tint of the screen

GREEN → Adjust the green tint of the screen

BLUE → Adjust the blue tint of the screen

UTILITY

RECALL → Return to the factory default settings

delivered from the factory

FULL AUTO → Optimize the screen status in PC

mode automatically and set the color value by re-measuring it

OSD

Same as the operation in VIDEO1, VIDEO2, and S-VIDEO

LANGUAGE

Same as the operation in VIDEO1, VIDEO2, and S-VIDEO

TO CONNECT THE POWER

Conversion plug

Be sure to connect the conversion plug to the power plug by the outlet!

• This monitor can be used with both AC 110V / 220V 60Hz. Various input voltages (within a range of AC90~250V) can be used. (Do not use it with a voltage higher than the rated voltage.) - A 110V/220V selector switch is not necessary. This monitor can be operated directly without any special operation.

CAUTION

• Make sure to operate this monitor at the rated voltage described in the user's manual or on the monitor. (If a voltage higher than the rated voltage is supplied, it may damage the receiver.)
• If you do not use the monitor for a long time, you must pull out the power plug from the inlet for safety.

POSSIBLE CONNECTIONS

• Read the installation/operation manual thoroughly before connecting equipment. • Turn off the power source before connecting the monitor and external equipment.

VIDEO 1 Connection (Select input VIDEO 1 button)

VIDEO 2 Connection (Select input VIDEO 2 button)

S-VIDEO / D-SUB 15PIN connection (Select input S-VIDEO, PC button)

CHECKLISTS

If your monitor is out of order, check the following problems first.

Problems Checkup		Troubleshoot
The screen doesn't appear and the sound is not heard.	• Is the power cord pulled out?• Is the power turned off?• Is this monitor connected with the external equipment erroneously?	• Connect the power cord correctly• Press the power button.• Check the cord and then connect it correctly.
The sound is heard but the video doesn't appear.	• Is the contrast and brightness wrongly controlled?• Is this monitor connected with the external equipment erroneously?	• Adjust the contrast and brightness correctly.• Check the cord and then connect it correctly.
The video appears but it is interrupted by static.	• Is the external equipment correctly connected?	• Check the cord and then connect it correctly.
Not the sound is heard. • Is the	volume turned down?• Is this monitor connected with the external equipment erroneously?	• Adjust the volume.• Check the cord and then connect it correctly.
The screen color is not clear and clean.	• Is the tint and color correctly adjusted?	• Adjust the contrast and brightness correctly.
The screen is shaken and is affected by static.	• Is the external equipment correctly connected?	• Check the cord and then connect it correctly.

SPECIFICATIONS

	17" LCD CCTV MONITOR	15" LCD CCTV MONITOR
PICTURE TUBE	0.264 PIXEL PITCH	0.297 PIXEL PITCH
RESOLUTION	SXGA (1280 x 1024)	XGA (1024 x 768)
SOUND OUTPUT	0.5W	0.5W
SPEAKER	AX 2W, 8 ohm 30x70mm	AX 2W, 8 ohm 30x70mm
POWER SOURCE	AC 100~240V 50/60Hz	AC 100~240V 50/60Hz
POWER CONSUMPTION	33±3 [W]	28±3 [W]
BRIGHTNESS	300cd/m2	450cd/m2
DIMENSIONS(WxHxD)	390 x 180 x 425 [mm]	365 x 180 x 389 [mm]
WEIGHT	6.0 Kg	5.6 Kg
TERMINALS	VIDEO CH1, 2 IN/OUT	VIDEO CH1, 2 IN/OUT
	AUDIO CH1, 2 IN/OUT	AUDIO CH1, 2 IN/OUT
	S-VIDEO IN	S-VIDEO IN
	PC IN	PC IN

This monitor has received the EMI (Electromagnetic Interference) test for business use.

Accordingly, a seller or user needs to be aware of this. If you purchase the wrong monitor, be sure to exchange it for a non-business monitor at the shop where you bought it.

LG Electronics Inc.

LG

15-inch TFT-LCD Monitor

17-inch TFT-LCD Monitor

USER MANUAL

MODEL: LSM-L115

LSM-L117

German

Page

German

Back

1. POWER SWITCH
2. POWER INDICATOR (STANDBY)
3. PC
4. S-VIDEO
5. VIDEO 2
6. VIDEO 1
7. VOLUME UP/DOWN
8. SELECT
9. MENU
10. CONTRAST
11. BRIGHTNESS
12. COLOR
13. TINT
14. VIDEO INPUT (CH1)
15. VIDEO OUTPUT (CH1)
16. VIDEO INPUT (CH2)
17. VIDEO OUTPUT (CH2)
18. AUDIO INPUT (CH1)
19. AUDIO OUTPUT (CH1)
20. AUDIO INPUT (CH2)
21. AUDIO OUTPUT (CH2)
22. S-VIDEO
23. PC
24. POWER CONNECTION
25. KENSINGTON LOCK

FUNCTIONS AND CONTROLS

1. POWER SWITCH

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

Side view

Rear view

1. POWER ON/OFF 14. VIDEO INPUT (CH 1) [POWER] 15. VIDEO OUTPUT (CH 1)
2. POWER INDICATOR (STANDBY) 16. VIDEO INPUT (CH 2) TION (STANDBY) 17. VIDEO OUTPUT (CH 2)
3. COMPUTER
4. S VIDEO
5. AUDIO INPUT (CH 1) 4.0 VIDEO
6. AUDIO OUTPUT (CH 1)
7. AUDIO INPUT (CH 2)
8. AUDIO OUTPUT (CH 2)
9. VOLUME UP/DOWN 22. S-VIDEO
10. COMPUTER
11. MENU
12. CONTRAST
13. POWER INPUT
14. BRIGHTNESS 25. SLOT FOR
15. COLOR ANTI-THEFT SYSTEM
16. TINT KENSINGTON

FUNCTIONS AND CONTROLS

Side view

Rear view

1. ON/OFF (POWER)
2. POWER LED INDICATOR (STANDBY)
3. PC
4. S-VIDEO
5. VIDEO 2
6. VIDEO 1
7. VOLUME UP/DOWN
8. SELECT
9. MENU
10. CONTRAST
11. BRIGHTNESS
12. COLOR

OVER SCAN: 0%, 5%, 10%

Side

Rear

1. POWER
2. POWER LED (STANDBY)
3. PC
4. S-VIDEO
5. VIDEO 2
6. VIDEO 1
7. VOLUME DOWN/UP
8. SELECT
9. MENU
10. CONTRAST
11. BRIGHTNESS
12. COLOR
13. TINT
14. VIDEO INPUT (CH1)
15. VIDEO OUTPUT (CH1)
16. VIDEO INPUT (CH2)
17. VIDEO OUTPUT (CH2)
18. AUDIO INPUT (CH1)
19. AUDIO OUTPUT (CH1)
20. AUDIO INPUT (CH2)
21. AUDIO OUTPUT (CH2)
22. S-VIDEO
23. PC
24. AC INPUT
25. KENSINGTON LOCK HOLE

FUNCTIONS AND CONTROL METHODS

OVER SCAN: 0%, 5%, 10%

- You can select 0% (original screen), 5% (zoom-in screen), or 10% (zoom-in screen) by selecting OVER SCAN.

OSD

Side

Rear

1. POWER
2. POWER SUPPLY INDICATOR LAMP (STANDBY)
3. PC
4. S-VIDEO
5. VIDEO 2
6. VIDEO 1
7. VOLUME DECREASE/INCREASE
8. SELECT
9. MENU
10. CONTRAST
11. BRIGHTNESS
12. COLOR
13. HUE
14. VIDEO INPUT (CHANNEL 1)
15. VIDEO OUTPUT (CHANNEL 1)
16. VIDEO INPUT (CHANNEL 2)
17. VIDEO OUTPUT (CHANNEL 2)
18. AUDIO INPUT (CHANNEL 1)
19. AUDIO OUTPUT (CHANNEL 1)
20. AUDIO INPUT (CHANNEL 2)
21. AUDIO OUTPUT (CHANNEL 2)
22. S-VIDEO
23. PC
24. AC POWER SOCKET
25. KENSINGTON LOCK SLOT

FUNCTIONS AND CONTROL METHODS

1. POWER BUTTON

OVER SCAN: 0%, 5%, 10% (SUPER SIZE: 0%, 5%, 10%)

OSD TRANSPARENCY