Multi Oil 35 M - Pump CrossTools - Free user manual and instructions
Find the device manual for free Multi Oil 35 M CrossTools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Oil pump |
| Brand | CrossTools |
| Model | Multi Oil 35 M |
| Dimensions (L x W x H) | 35 x 20 x 25 cm |
| Weight | 4.5 kg |
| Power supply | 230 V / 50 Hz |
| Oil flow rate | 35 L/min |
| Maximum pressure | 1 bar |
| Tank capacity | 1 L |
| Main functions | Oil transfer, draining, filling |
| Material | Steel and plastic |
| Maintenance | Drain regularly, clean the strainers |
| Cleaning | With a dry cloth, avoid water |
| Safety | Thermal fuse, overload protection |
| Spare parts available | Strainer, hose, seals |
| Repairability | Standardized parts, repair possible by a professional |
| Operating temperature | 0 to 40 °C |
| Included accessories | 2 hoses (3/4"), drain key |
| Warranty | 2 years |
Frequently Asked Questions - Multi Oil 35 M CrossTools
How to use the Multi Oil 35 M pump to drain oil?
Place the suction hose into the used oil tank and the outlet hose into an empty container. Plug in the pump and turn it on. Make sure to respect the indicated rotation direction.
What type of oil can I transfer with this pump?
This pump is designed for non-corrosive oils such as engine oil, hydraulic oil, or transmission oil. Do not use with flammable or corrosive liquids.
How to maintain the CrossTools Multi Oil 35 M pump?
After each use, drain the tank and clean the strainers with a dry cloth. Regularly check the condition of the hoses and seals. Store it in a dry place.
What to do if the pump does not start?
Check that the plug is connected and that the thermal fuse has not blown. If the problem persists, consult a professional. Never disassemble the pump while it is live.
What is the maximum pressure of the pump?
The maximum pressure is 1 bar. Do not exceed this pressure to avoid damaging the pump or hoses.
Can I use the pump with hot oil?
Yes, but the temperature must not exceed 40 °C. Beyond that, the pump could overheat and deteriorate.
What accessories are supplied with the pump?
The pump comes with 2 hoses of 3/4 inch and a drain key. You can purchase additional hoses as an option.
How to clean the pump after use?
Unplug the pump, clean the outside with a dry, clean cloth. Never use water or aggressive solvents. Check that the strainers are not clogged.
Where can I find spare parts for the Multi Oil 35 M?
Spare parts (strainer, hose, seals) are available from your CrossTools dealer or on the official website. Use only original parts.
Can the pump be used for liquids other than oil?
No, it is designed only for non-corrosive oils. Use with water, solvents, or acids would damage the pump and void the warranty.
User questions about Multi Oil 35 M CrossTools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual Multi Oil 35 M - CrossTools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Multi Oil 35 M by CrossTools.
USER MANUAL Multi Oil 35 M CrossTools
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CrossTools
Model : Multi Oil 35 M
Category : Pump