PowerConnect B-MLXE8 - Network switch DELL - Free user manual and instructions
Find the device manual for free PowerConnect B-MLXE8 DELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Network switch (modular chassis) |
| Modèle | PowerConnect B-MLXE8 |
| Marque | Dell |
| Facteur de forme | Rack-mountable (8U) |
| Dimensions (H x L x P) | 8.75 x 17.5 x 20 pouces (approx.) |
| Poids | Approx. 22.7 kg (50 lb) |
| Alimentation | Redondant, AC 100-240 VAC, 50-60 Hz, jusqu'à 1200 W |
| Ventilation | Ventilateurs redondants à chaud |
| Capacité de commutation | Jusqu'à 3.84 Tbit/s |
| Nombre d'emplacements | 8 pour modules de ligne |
| Ports max | 384 x 10GbE ou 48 x 100GbE |
| Fonctions principales | Routage Layer 3, VLAN, QoS, ACL, OSPF, BGP, VRRP, MLAG |
| Gestion | CLI, SNMP, Web GUI, console série |
| Sécurité | 802.1X, ACL, SSH, RADIUS, TACACS+ |
| Entretien et nettoyage | Éteindre l'appareil, essuyer avec un chiffon doux et sec. Ne pas utiliser de produits liquides ou abrasifs. |
| Réparabilité | Modules et ventilateurs remplaçables à chaud. Le châssis et l'alimentation nécessitent un technicien qualifié. |
| Pièces détachées | Disponibles via Dell : modules d'interface, blocs d'alimentation, packs de ventilateurs |
| Température de fonctionnement | 0°C à 40°C (32°F à 104°F) |
| Humidité de fonctionnement | 10% à 90% (sans condensation) |
| Certifications | UL, CE, FCC Classe A, RoHS |
| Garantie | Garantie matérielle limitée de 3 ans (selon la région) |
Frequently Asked Questions - PowerConnect B-MLXE8 DELL
How do I access the CLI interface of the PowerConnect B-MLXE8?
Connect a console cable to the serial port (RJ45) and use a terminal emulator at 9600 baud, 8 data bits, no parity, 1 stop bit. Default login credentials are admin/admin (or as set).
What are the default VLAN settings on the B-MLXE8?
By default, all ports belong to VLAN 1. To create or modify VLANs, use the vlan database command and assign ports accordingly.
How can I reset the switch to factory defaults?
From the CLI, use erase startup-config and then reload. For a hardware reset, you can press and hold the reset button on the front panel for 10 seconds.
What type of SFPs are compatible with the B-MLXE8?
The switch supports Dell qualified SFP+ (10GbE), SFP (1GbE), and QSFP+ (40GbE) or QSFP28 (100GbE) modules depending on the line card. Always use Dell approved optics for best compatibility.
How do I configure port mirroring on the B-MLXE8?
Use the monitor session commands: monitor session 1 source interface ethernet 1/1 both and monitor session 1 destination interface ethernet 1/2.
What should I do if the switch does not power on?
Check the power cables, ensure the power supplies are seated properly, and verify the input voltage. If the LED on the power supply is off, replace the power supply unit.
How do I upgrade the firmware on the PowerConnect B-MLXE8?
Download the firmware from Dell's support site. Use TFTP or USB to copy the image to the switch. Then boot using boot system flash primary after copy tftp flash.
Can I stack multiple B-MLXE8 switches?
Yes, the B-MLXE8 supports stacking via the proprietary stacking ports. Up to 8 units can be stacked using a 10GbE or 40GbE stacking cable. Configuration is done using stack commands.
How do I perform a password recovery?
Power cycle the switch and press Esc during boot to enter bootloader. Use boot and then reset-password to clear the existing password. Then reload and set a new password.
What are the environmental requirements for the B-MLXE8?
Operate at temperatures between 0°C and 40°C, with relative humidity of 10% to 90% non-condensing. Ensure proper airflow with at least 6 inches clearance around vents.
User questions about PowerConnect B-MLXE8 DELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual PowerConnect B-MLXE8 - DELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PowerConnect B-MLXE8 by DELL.
USER MANUAL PowerConnect B-MLXE8 DELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DELL
Model : PowerConnect B-MLXE8
Category : Network switch