What should I do if my Dell P1130 monitor won't turn on?

Question

Accepted Answer

If your Dell P1130 monitor won't turn on, start by checking the power supply. Make sure the power cable is fully inserted into the power port located at the back of the monitor and that the electrical outlet is working. You can test the outlet with another device to confirm it is functional. Then observe the LED indicator light on the monitor: it should light up green when the monitor is on, or amber if it is in power-saving mode.

Press the power button on the monitor firmly and wait a few seconds for the light to turn on. If you have just cut the power, the LED light may take up to 10 seconds to turn completely black. Then try another power cable: you can use your computer's power cable for testing. Also, check that the monitor's power voltage selector matches that available in your region.

If the LED light remains off after these checks, inspect the power cable to see if it is damaged. Never reuse a cable showing signs of degradation (tears, visible wires, burn marks). No objects should rest on the cable, and it should not be left in busy areas to avoid damage.

If the LED light turns on but no image appears on the screen, check the connection of the VGA video cable between the monitor and your computer. Ensure that the connector is properly plugged into the VGA port of the monitor and your video card. Test with another VGA cable if possible, and try connecting the monitor to another computer to determine if the problem lies with the monitor or your system.

If after these steps the Dell P1130 monitor remains non-functional, this may indicate an internal fault (power board, capacitors, transformer). In this case, professional repair by a qualified technician will be necessary, or replacement of the monitor may be considered if repair is not economically viable.

User manual DELL : user manuals and guides in PDF

Models DELL most viewed

Browse manuals DELL by appliance type

Recent questions about devices DELL