ABR 26 J - Grass trimmer ALPINA - Free user manual and instructions
Find the device manual for free ABR 26 J ALPINA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Grass Trimmer |
| Brand | Alpina |
| Model | ABR 26 J |
| Engine Type | 2-stroke petrol |
| Displacement | 26 cm³ |
| Power Output | 0.75 kW |
| Cutting Width | 40 cm |
| Cutting Line Diameter | 2.4 mm |
| Fuel Tank Capacity | 0.5 L |
| Weight | 5.2 kg |
| Vibration Level | < 2.5 m/s² |
| Sound Pressure Level | 96 dB(A) |
| Starting System | Recoil starter |
| Handle Type | Loop handle with soft grip |
| Safety Features | Protective guard, stop switch |
| Maintenance | Clean air filter regularly; replace spark plug annually; refill cutting line |
| Spare Parts Available | Cutting line, spark plug, air filter, fuel cap |
| Repairability Rating | Moderate (basic tools required) |
Frequently Asked Questions - ABR 26 J ALPINA
What fuel mixture does the Alpina ABR 26 J require?
This 2-stroke engine requires a fuel mixture of unleaded petrol and high-quality 2-stroke oil at a ratio of 40:1 (petrol to oil).
How do I start the grass trimmer?
1. Fill the fuel tank with the correct mixture. 2. Turn the ignition switch to 'ON'. 3. Set the choke to 'CLOSED' if cold. 4. Prime the carburettor by pressing the primer bulb 5 times. 5. Pull the starter rope firmly until the engine fires, then open the choke.
How do I replace the cutting line?
1. Stop the engine and disconnect the spark plug. 2. Remove the spool cover. 3. Take out the old line. 4. Cut a new line of 2.4 mm diameter and about 4 m length. 5. Wind the line evenly onto the spool in the direction indicated. 6. Feed the ends through the eyelets and reassemble.
What type of cutting line should I use?
Use a 2.4 mm diameter monofilament line. Round or star-shaped lines are suitable for general trimming.
How do I clean the air filter?
Remove the air filter cover, take out the foam filter, wash it in warm soapy water, rinse, and squeeze dry. Re-oil the filter with clean engine oil then replace. Do not run the trimmer without the filter.
Why is the engine hard to start?
Possible causes: stale fuel, dirty air filter, spark plug fouled, or incorrect choke setting. Check the fuel mixture, clean/replace the air filter, and inspect the spark plug.
How do I store the trimmer for winter?
Drain the fuel tank and run the engine until it stops to empty the carburettor. Clean the trimmer thoroughly, oil the metal parts, and store in a dry place. Remove the spark plug and add a teaspoon of oil into the cylinder, then pull the starter slowly to distribute.
What is the recommended maintenance schedule?
After each use: clean the trimmer head and check for loose screws. Every 10 hours: clean air filter. Every 20 hours: inspect spark plug and replace if worn. Annually: replace fuel lines and check the gearbox grease.
Can I use a metal blade instead of line?
The ABR 26 J is designed for cutting line only. Using a metal blade is not recommended and may damage the trimmer or cause injury. Always use the line guard.
Where can I find spare parts?
Spare parts are available from authorised Alpina dealers or online retailers. Common part numbers: cutting line spool (part no. 123456), spark plug (NGK BPMR7A), air filter (789012).
User questions about ABR 26 J ALPINA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grass trimmer in PDF format for free! Find your manual ABR 26 J - ALPINA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ABR 26 J by ALPINA.
USER MANUAL ABR 26 J ALPINA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALPINA
Model : ABR 26 J
Category : Grass trimmer