Narvik 25 V2 - Heat pump WILFA - Free user manual and instructions
Find the device manual for free Narvik 25 V2 WILFA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air-to-air heat pump (split system) |
| Brand | Wilfa |
| Model | Narvik 25 V2 |
| Heating Capacity | 2.5 kW (approx.) |
| Cooling Capacity | 2.5 kW (approx.) |
| Energy Efficiency Class | A+ (heating and cooling) |
| Refrigerant | R32 |
| Power Supply | 230V / 50Hz |
| Dimensions (Indoor Unit HxWxD) | 300 x 800 x 250 mm |
| Weight (Indoor Unit) | 10 kg |
| Functions | Heating, cooling, dehumidification, fan only, timer, sleep mode, auto swing |
| Maintenance | Clean air filters every 2 weeks; check condensate drain annually |
| Safety Features | Overheat protection, auto restart after power failure, child lock |
| Spare Parts | Air filters, remote control, fan motor (available from Wilfa) |
| Repairability | Modular design for easy repair; spare parts available for 10 years |
| General Information | Suitable for rooms up to 25 m²; multi-language manual included |
Frequently Asked Questions - Narvik 25 V2 WILFA
What is the cooling and heating capacity of the Narvik 25 V2?
The Narvik 25 V2 has a nominal capacity of approximately 2.5 kW for both heating and cooling, suitable for medium-sized rooms up to 25 m².
How do I clean the air filters?
Turn off the unit and open the front panel. Remove the filters and vacuum or wash them with mild detergent. Let them dry completely before reinstalling. Clean every 2 weeks under normal use.
What should I do if the heat pump does not turn on?
Check the power supply and circuit breaker. Ensure the remote control has batteries and is pointed at the unit. If the problem persists, reset the unit by unplugging for 5 minutes.
Can I use the heat pump in winter?
Yes, the Narvik 25 V2 is designed to operate in low temperatures down to -15°C for heating. Ensure the outdoor unit is free from snow and ice.
How do I set the timer?
Press the Timer button on the remote control. Use the +/- buttons to set the desired on/off time. Confirm by pressing the Timer button again. The unit will automatically start/stop at the set time.
What does the 'sleep mode' do?
Sleep mode gradually adjusts the temperature to ensure comfortable sleep. It increases the set temperature by 1°C per hour for 2 hours in cooling mode, and decreases in heating mode, to save energy.
Is professional installation required?
Yes, installation must be carried out by a qualified technician to ensure proper refrigerant handling, electrical connections, and drainage. DIY installation may void the warranty.
How often should I service the heat pump?
Have a professional service the unit every 1-2 years to check refrigerant levels, clean coils, and inspect electrical components. Regular service extends the lifespan.
What should I do if water leaks from the indoor unit?
Turn off the unit immediately. Check if the condensate drain is clogged. Clean the drain pan and line with a vacuum or wire. If the issue persists, contact a technician.
Where can I find spare parts?
Spare parts such as filters, remote controls, and fan motors are available from Wilfa authorized dealers or the official website. Use only original parts for safety.
User questions about Narvik 25 V2 WILFA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual Narvik 25 V2 - WILFA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Narvik 25 V2 by WILFA.
USER MANUAL Narvik 25 V2 WILFA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WILFA
Model : Narvik 25 V2
Category : Heat pump