DH243 - Dehumidifier ALPATEC - Free user manual and instructions
Find the device manual for free DH243 ALPATEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Compressor dehumidifier |
| Model | DH243 |
| Brand | Alpatec |
| Dehumidification capacity | 24 L/day (at 30°C, 80% RH) |
| Maximum recommended area | 50 m² |
| Dimensions (W x D x H) | 38 x 28 x 58 cm |
| Net weight | 14 kg |
| Power supply | 220-240 V ~ 50 Hz |
| Power consumption | 480 W |
| Water tank | 6.5 L removable |
| Continuous drainage | Yes (drain hose included) |
| Noise level | 48 dB(A) |
| Main functions | Dehumidification, ventilation, 24h timer, adjustable hygrostat |
| Air filter | Washable polypropylene |
| Maintenance and cleaning | Clean the filter every 2 weeks, clean the tank and condenser regularly |
| Safety | Automatic shut-off when tank full, anti-freeze protection, safety switch |
| Spare parts and repairability | Available via Alpatec after-sales service |
| General information | Indoor use, operating temperature 5-32°C |
| Warranty | 2 years |
Frequently Asked Questions - DH243 ALPATEC
How to turn the Alpatec DH243 dehumidifier on and off?
Use the on/off button on the control panel. The unit turns on in continuous dehumidification mode. To turn it off, press the same button again.
What to do if the water tank is full?
The unit stops automatically and an indicator lights up. Empty the tank by removing it via the handle, then put it back. The unit restarts automatically.
Can I use a continuous drain hose?
Yes, the DH243 is equipped with a connector for a continuous drain hose. Connect the provided hose to the water outlet at the back and direct it to a suitable drain.
How to set the desired humidity?
Press the Hygrostat button to select the relative humidity level (from 40% to 80%). The unit automatically maintains the chosen level.
How often should I clean the air filter?
Clean the filter every two weeks. Remove it from the filter compartment and rinse it with lukewarm water. Let it dry completely before putting it back.
Why doesn't the unit operate below 5°C?
The compressor is protected by an anti-freeze function. If the ambient temperature is below 5°C, the unit does not start to avoid damage.
What does the flashing light on the panel mean?
A flashing may indicate a full tank, a dirty filter, or a malfunction. Consult the manual to identify the specific flashing code.
Can I set an automatic shut-off?
Yes, use the Timer button to set a shut-off time from 1 to 24 hours. The unit will turn off automatically after the set delay.
What maintenance is needed for the condenser?
Clean the condenser fins once a year with a soft vacuum to remove dust. Avoid using metal objects that could damage them.
Is it normal for the unit to ice up?
Slight frost may appear in very cold conditions. The unit defrosts automatically thanks to an integrated function. If frost persists, ensure the ambient temperature is above 5°C.
User questions about DH243 ALPATEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual DH243 - ALPATEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DH243 by ALPATEC.
USER MANUAL DH243 ALPATEC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALPATEC
Model : DH243
Category : Dehumidifier