ZJB9476 - Fridge ZANUSSI - Free user manual and instructions

USER MANUAL ZJB9476 ZANUSSI

I KhoNka BKNIOUeyH/BbIKJIIOUeyEH MOpO3nIbHOro OTCeKa

KhoPknДЯpeRyIInpOBKn TemnepaTypbl

PerynipoBka TempepaTpybI ocuyeCTbJareTcKHOJIKAmN“+”n“-”.

KhONKn noqkIIOueHbI K dncJIeIo TEMpeaTpybl.

KhoNn noKnHcHbI K dncJIeTo TempeaTpybl.

• Пи Нжати OДнОИЗ KНОК “+” (БОЛЕВыСКАЯ) ИИ “-” (БОЛЕЕ HИЗКАЯ), диспей Temпературьпpepeключaelc c PEАльHOД Temпературьd (диспей Temпературь He MURAeT) на HOMIHАльHyIO Temпературy (диспein Temпературь MURAeT).
• Пи Кждом последуюшем Нжати OДнои 3двух кнорok HOMHHAJIbHЯ Tempepatypa yBelenuBaetca Na 1^ C. HOMHAlbHЯ Tempepatypa Должна 6ыт bdoCTnIHytaВ Teuehoe 24 yapocB.

IocJIe HaxaTnKHOJOK, DInCnJIeN TeMnepaTypbI aBTOMaTnueCKn nepeKJIIOuAeTcHa PAJIbHYIO Tempepatpy npi6n3ntelbHo uepe3 5 cekyHd.

HOMIHAJIbHAR TemnepaTypa 3To:

TeMnepaTpa, KOtopa JOnJxHa 6bItb BHyTpni XoJIoNJIbHOrO oTceKa. HOMNHAJbHAp TEmnpaTpa IOKa3bIBaetcra MIRaIOUIMN Ucpamn.

PEAJIbHAR TemnepaTypa 3To:

TemnepaTpa, KOToPA OeScneHeBa B XOJODINbHOM OTcKe Ha DaHHbIM MOMENT.

PEAJIbHAR Tempepatya noka3bIbaetcHemraUzmmu cnppaMn Ha dinCnlee.

Дистел Tempepatypы

Диспл德新 TemпераТурь MOжЕТ NOKAЗВaТь pa3NiUHHyO INHФОмAUИ.

Bo Bpem HOpMaIbHoi pa6Otbl Noka3bIbAeTcra TempepaTypa, o6ecneueHHaB XoJIoNlBHom OTceKe B DaHHbIMOMeHT (PEAJIbHAAr TempepaTypa).
Bo BpempeyInpOBKn Tempeatypa, BBeDeHHaB DaHbIM MOMeHT BXOJIOJIbHbI OTcEK (HOMHaJIbHAR Tempeatypa) noka3bIbaeTcRa Na dncPlee MrraOzIMn Ucpamn.

TEXHINUeCKNE DAHHbIE

• YctaHOBnTe DepeKaTeIb ChOBA Ha peryIInpOBOuHbE BnHTbI 3aKpyTnTe raIKN C sha6amn, He 3aTЯrNBaJnx.

3aKpoITe DBepuN npOBepbTe, yTo6bl MaJIeHbKaJ DBePca 6bla yCTaHOBJIeHa Ha Tpe6yEmoB BbICOTe, BbIPaBHBaR ee npn Heo6xOdIMOCtN peYJINpOBOUHbIMN BNHTaMn.
- Исторьштейдд Великий Довец.
- Ecni Heo6xOdmo, BbyipOBHnTe DBepeIb I Ropn3OHtAlbHom HnPaBLeHn, CMeUaIx.
- После тoro, кak Дверцы 6удт ВьIpOBHeHbl, 3atЯнite raикп држateел n BnHTbl MaJIeHbKOTo DePkaTeIa.

• ПпкpenITEКпанелДержateль,pacnoLOXeHHbI NOd DBepceI,prn NOMOuINDByx ПlaCTIKOBbIX ShaB6,IMeUxxCBy Kopo6Ke C npHaJaJIeKHOCTaMn.
  3aTeM yCTaHOBInTe KpbIuKy DepeKaTeJHa MeCTo.

Pa3MeueHne XOJIoNJIbHnKa

• YctaHOBInTe XOJIoDnJIbHNK B IpeIHa3HaueHHyIO dJa Hero NpIoCTb.
• Повернтукpoиштейн ha 180° Дя полученя.ToCHOrO noLOXeHn (2).

U3haaybHoe noJoxeHne (1) - TpaHCnOpTHoe.

BbipabHnBaHne DBepei (npn Heo6xoDmoctn)

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.

If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death-trap for a child.

These warnings are provided in the interest of safety. You must read them carefully before installing or using the appliance.

General Safety

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  Children should be supervised to ensure that they do not play with the appliance.
• It is dangerous to alter the specifications or modify this product in any way.
• Before any cleaning or maintenance work is carried out, be sure to switch off and unplug the appliance.
• This appliance is heavy. Care should be taken when moving it
• Ice lollies can cause frost burns if consumed straight from the appliance.
• Take utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages.
• The appliance must not be located close to radiators or gas cookers.
• Avoid prolonged exposure of the appliance to direct sunlight.
• There must be adequate ventilation round the back of the appliance and any damage to the refrigerant circuit must be avoided.
• For freezers only (except built-in models): an ideal location is the cellar or basement.
• Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances.

Service/Repair

• Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person

• This product should be serviced by an authorized Service Centre, and only genuine spare parts should be used.

• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or more serious malfunctioning. Refer to your local Service Centre, and always insist on genuine spare parts.

• This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.

Use

• The domestic refrigerators and freezers are designed to be used specifically for the storage of edible foodstuffs only.
• Best performance is obtained with ambient temperature between +18^ and +43^ (class T); +18^ and +38^ (class ST); +16^ and +32^ (class N); +10^ and +32^ (class SN). The class of your appliance is shown on its rating plate.

Warning: when the ambient temperature is not included within the range indicated for the class of this appliance, the following instructions must be observed: when the ambient temperature drops below the minimum level, the storage temperature in the freezer compartment cannot be guaranteed; therefore it is advisable to use the food stored as soon as possible.

• Frozen food must not be re-frozen once it has been thawed out.
• Manufacturers' storage recommendations should be strictly adhered to. Refer to relevant instructions.
• The inner lining of the appliance consists of channels through which the refrigerant passes. If these should be punctured this would damage the appliance beyond repair and cause food loss. DO NOT USE SHARP INSTRUMENTS to scrape off frost or ice. Frost may be removed by using the scraper provided. Under no circumstances should solid ice be forced off the liner. Solid ice should be allowed to thaw when defrosting the appliance.
• Do not place carbonated or fizzy drinks in the freezer as it creates pressure on the container,

which may cause it to explode, resulting in damage to the appliance.

Installation

• During normal operation, the condenser and compressor at the back of the appliance heat up considerably. For safety reasons, minimum ventilation must be as shown in the instructions.
  Attention: keep ventilation openings clear of obstruction.
• Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
  Important: if the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
• If the appliance is transported horizontally, it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to flow back in the compressor.
• There are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions.
• Parts which heat up should not be exposed. Wherever possible the back of the product should be against a wall.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from municipal authorities. The materials used on this appliance marked by the symbol are recyclable.

Disposal of old Appliances

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

IMPORTANT SAFETY INFORMATION

Building the appliance in

• Fit the appliance into the recess.
• Rotate the bracket of 180^ in order to obtain the right position (2).

The position (1) is on the delivery.

Fix it to a solid wall with the appropriate bracket.

CONTENTS

Warnings 34

Use - Cleaning the interior - Use of the freezer - Control panel 36

Use - Operation - Freezing fresh food - Storage of frozen food - Thawing - Ice-cube production - .37

Use - Freezer Compartment - Useful hints for freezing 38

Use - Use of the refrigerator - Control panel - Operation 39

Use - Refrigerator Compartment 40

Maintenance - Periodic cleaning - Defrosting - Interior light 41

Troubleshooting - Technical information - 42

Installation - Location - Electrical connection 43

Positioning - Height adjustment - Fitting the side panels 44

Positioning - Fitting the door panels 45

Positioning - Building the appliance in - Fitting the plinth 47

Guarantee conditions 49

OPERATION

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.

Use of the freezer

Control panel

Do not use detergents or abrasive powders, as these will damage the finish.

A ON/OFF light
B Freezer button ON/OFF
C Temperature setting button (warmest)
D Temperature indicator
E Temperature setting button (coldest)

A. Light ON/OFF

B. Button ON/OFF

ON: Press the button (B). The pilot light (A) switches on.

OFF: Keep press the button (B) until the pilot light (A) and the temperature indicator switched off.

C - E. Temperature setting buttons

The temperature can be adjusted between -15^ and -24^ .

By pressing the button (C or E), the current

F Alarm reset light
G Alarm reset button
H Auto Freeze light
I Auto Freeze button

temperature setting flashes on the indicator. It is possible to modify the setting temperature only with flashed indicator. To set a warmer temperature, press button (C). To set a colder temperature, press button (E). The indicator display the newly selected temperature for a few seconds and then shows again the inside compartment temperature.

The newly selected-temperature must be reached after 24 hours.

Attention!

During the stability period by the first starting the temperature displayed can not correspond to the setting temperature.

D. Temperature indicator

During normal functioning the indicator shows the temperature inside the freezer.

Attention!

Difference between the temperature displayed and temperature setting is normal. Especially when:

• a new setting has recently been selected
• the door has been left open for a long time
  warm food has been placed in the compartment.

F. Alarm reset light

G. Alarm reset button

In the event of an abnormal temperature rise inside the freezer (e.g. power cut) warning light (F) will start to flash and a buzzer will sound.

After the temperature has returned to normal, the warning light (F) will continue to flash, although the buzzer has stopped.

When the alarm button (G) is pressed, the warmest temperature reached in the compartment flashes on the indicator (D).

If the power has been off for a long time, frozen food should be consumed as quickly as possible, or cooked and then re-frozen.

H. Auto Freeze pilot light

I. Auto Freeze button

To freeze fresh foods, the "Auto freeze" function must be activated. Press the auto freeze button (I). The relevant pilot light (H) switches on. When this function is on, SP is shown on the dispay.

The function can be deactivated at any time, by pressing the button (I), otherwise it automatically switched off. With deactivated functionth pilot light (H) switches off.

Operation

Insert the plug in the power socket. Press the button ON/OFF (B). The freezer is switched on.

The freezer is pre-set to run at -18^ . this temperature will be reached in a few hours.

As soon as the appliance is switched on the temperature indicator (D) shows the current temperature inside the freezer, the alarm reset light (F) flashes and a buzzer sounds. Press the alarm reset button (G). The buzzer stops and the alarm light (F) continues to flash until the setting temperature is reached.

Freezing fresh food

To freeze fresh food, press the Auto freeze button (I) at least 24 hours before.

Place the food to be frozen in the Auto freeze compartment. The maximum quantity of food which can be frozen in 24 hrs. is shown on the rating plate.

Warning!

When use the "Auto freeze" function:

about 6 hrs before	Introducing small quantities of fresh food (about 5 kg)
about 24 hrs before	Introducing the maximum quantity of food (see rating plate)
not needed	Introducing frozen food
not needed	Introducing small quantities of fresh food daily 2 kg maximum

Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the compartment let the appliance run for at least two hours on the Auto freeze setting, then push again the Auto Freeze button.

Important

In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer that the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then refrozen (after cooling).

Thawing

Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation.

Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer.

Ice-cube production

This appliance is equipped with one or more trays for the production of ice-cubes. Fill these trays with water, then put them in the freezer compartment.

Do not use metallic instruments to remove the trays from the freezer.

Freezer compartment

• If food is to be frozen immediately after having installed the appliance or after a prolonged period out of use, push the button and allow the appliance to run for at least 4 hours before placing the food in it.

If the freezer is already operating, with food inside it, push the button 24 hours before loading food to be frozen.

• The alarm light indicates when the temperature inside the freezer compartment has risen to a point at which safe storage of frozen foods can no longer be guaranteed. When the appliance is first started up, or after having loaded a quantity of food to be frozen, this warning light will stay or until a safe storage temperature has been reached.
• Products to be frozen should be placed in the fast freeze compartment and, once frozen, moved to the storage baskets.
• The maximum freezing capacity is 13kg in 24 hours. Do not freeze more than one quantity at a time.

Useful hints for freezing

• Products to be frozen should be fresh and clean.
• Pack foods in suitable family portions which can be used up all at once.
• Small packs allow fast and uniform freezing.
• Lean foods keep better and longer than fatty foods. Salt reduces the storage life of food.
• Wrap foods closely in aluminium foil or plastic bags or film, and make sure they are properly sealed.
• Attach a label to each pack, indicating the contents and the date on which it was prepared.
• Never place hot foods, bottles or containers with fizzy drinks in the freezer (they could explode).
• Do not fill containers with lids right to the brim.
• Do not add more food or open the doors during the freezing process.
• Never place food to be frozen in contact with already frozen food, as this would increase the temperature of the latter.

Use of the refrigerator

Control Panel

J ON/OFF light
K Fridge button ON/OFF
L Temperature setting button (warmest)
M Temperature indicator

J. Light ON/OFF

K. Button ON/OFF

ON: Press the button (K). The pilot light (J) switches on.
OFF: Keep press the button (K) until the pilot light (J) and the temperautre indicator switched off.

L - N. Temperature setting buttons

The temperature can be adjusted between +2^ and +8^ .

By pressing the button (L or N), the current temperature setting flashes on the indicator. It is possible to modify the setting temperature only with flashed indicator. To set a warmer temperature, press button (L). To set a colder temperature, press button (N). The indicator display the newly selected temperature for a few seconds and then shows again the inside compartment temperature.

The newly selected-temperature must be reached after 24 hours.

Attention!

During the stability period by the first starting the temperature displayed can not correspond to the setting temperature. During this time it is possible that the temperature displayed is lower than the setting temperature.

M. Temperature indicator

During normal functioning the indicator shows the temperature inside the fridge.

N Temperature setting button (coldest)
O Auto fresh light
P Auto fresh button

Attention!

Difference between the temperature displayed and temperature setting is normal. Especially when:

• a new setting has recently been selected
• the door has been left open for a long time
• warm food has been placed in the compartment

O. Auto fresh pilot light

P. Auto fresh button

The maximum performance is obtained by setting the Auto fresh function. It's recommended when loading large quantities of food.

Press the Auto fresh button (P).The relevant pilot light (O) switches on.

The internal temperature goes down to +2^ .

After about 6 hours the Auto fresh function switches off automatically.

Operation

Insert the plug in the power socket. Press the button ON/OFF (K). The fridge is switched on.

The fridge is pre-set to run at +5^ C . This temperature will be reached in a few hours.

Refrigerator compartment

For proper opening and closing, it is advisable to act on both doors simultaneously (as shown in the figure).

• Do not place hot food or drinks in the refrigerator; wait until they traverse cooled to room temperature.
• Always cover foods, especially those which are strong-smelling or aromatic.
• Place foods so that air can circulate freely round them.

The temperature selected may be adjusted to compensate for temperature variations due to:

The frequency with which the doors are opened.
- Difference in ambient temperature.
Quantity of food being stored.

To make the best use of available space, the front half-shelves may be stacked on top of the rear halfshelves.

To achieve automatic defrosting of the refrigerator, the compressor must cut out from time to time. If the bottom of the compartment becomes covered with too much frost, push the warmer temperature button (L) until the compressor starts to cut out periodically.

MAINTENANCE

Before carrying out any maintenance operations, including those described in this book, unplug the appliance from the mains supply.

Warning

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.

Periodic cleaning

Clean the inside of the appliance and the accessories with a solution of lukewarm water and bicarbonate of soda (one tablespoonful of soda to 4 litres of water). Rinse and dry thoroughly.

The freezer compartment drawers can be removed for washing. To remove the drawers, pull them out until they reach the stop, then lift and withdraw them from the guides. To refit the drawers, engage them in the guides then, keeping them tilted, push them inwards.

Defrosting

To achieve automatic defrosting of the refrigerator, the compressor must cut out from time to time. If the bottom of the compartment becomes covered with too much frost, select the temperature towards a warmer setting until the compressor starts to cut out periodically.

It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole.

Important:

Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.

Do not use a maechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.

Interior light

Refrigerator compartment

Remove the cover.

Replace the lamp with one of the same power (the maximum power is shown on the light diffuser).

TROUBLESHOOTING

If something is not working properly, make sure that all the instructions in this book trace been followed before calling the SERVICECENTRE.

The compressore are not working

• Power cut or power supply problem.
• Mains On/Off switch in position "0".

The interior lights are not working

• Bulb loose or blown.

Water in the refrigerator compartment

• Drain hole blocked.

Poor performance

• Frequent opening of doors, large quantity of food placed in appliance all at the same time.
• Inadequate ventilation.

To help the SERVICE CENTRE provide you with fast efficient cervice, please quote the following details when calling

Model (Mod.)

Product number (Prod. No.)

Serial number (Ser. No.)

which can be found on the guarantee certificate or on the rating plate, visible in the position shown by the arrow (see Fig.) after having removed the right-hand drawer.

TECHNICAL INFORMATION

Net Fridge Capacity It.	338
Net Freezer Capacity It.	96
Energy Consumption kWh/24h	1,140
Energy Consumption kWh/year	416
Freezing Capacity 24h	13
Rising time	14

The technical infomation are situated in the rating plate on the internal left side of the appliance .

INSTALLATION

If this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death-trap for a child.

Location

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.

For building into the kitchen units follow the special "Building-in" instructions given.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ± 6% of the rated voltage.

For operation with different voltages, a suitably sized auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a contact for this purpose.

If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a specialist technician.

The Manufacturer declines all responsibility if the above safety precautions are not observed.

This appliance complies with the following E.E.C.Directives:

• 87/308 EEC of 2/6/87 relative to radio interference suppression.
• 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
• 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation

POSITIONING

Height adjustment

The height of the appliance is adjustable from 820 to 870 mm to fine up with existing kitchen units.

Before installing the appliance between unite, adjust the height of the feet and rear wheels. The wheels are factory set for a height of 820mm . To align the appliance to a height of 870mm , raise it by adjusting the feet with a spanner, then remove the wheels and refit them in the lowest position.

Fitting the side panels

• Fit the brackets onto the panels in the positions shown in the diagram. The dimension of 260^ mm is allowed for fitting a 100mm plinth below the panel. For different plinth sizes, increase the dimension of 260^ mm accordingly.

• Rest the panels against the appliance.
• Fit the rear brackets, taking into account the thickness of the panels (maximum width of unit 900mm ).
• For a correct alignment make sure that the distance between the appliance and the cabinet is of 45 ~mm .
• Secure the panels at the front.
  Fix the squares (contained in the bag) to the lower part of the door (references already provided).

Fitting the door panels

• Open a door a remove the bracket cover. Undo the nuts with washers and remove the bracket from the door.
• Drill the small doors as shown in the figure.

Fix the bracket to the door with the screws contained in the bag.
- Refit the bracket on the adjustment screws and screw the nuts with washers without tightening them down

• Close the door and check that the small door is positioned at the required height, operating the adjustment screws if necessary.
• Use the same screws for vertical alignment of the small doors.
• If necessary, carry our horizontal alignment by shifting the small doors.
  After aligning the doors, tighten the nuts of the brackets and the screws of the small bracket.

Fix the bracket located under the door to the panel with the two plastic washers contained in the box of accessories.
- Then refit the bracket cover.

Building the appliance in

• Fit the appliance into the recess.
• Rotate the bracket of 180^ in order to obtain the right position (2).

The position (1) is on the delivery.

Fix it to the wali with the appropriate bracket.

• The top of the appliance must be kept clear to allow better air circulation. If a wall unit is fitted above the appliance, there must be a gap of 50 mm between this unit and the wall and it must be at least 50 mm below the ceiling.

Fitting the plinth

Alignment height of 820~mm

• If using a 140 to 170mm plinth, make a cut-out as shown.
• If using a plinth higher than 100mm but less than 140mm , cut the height compensation strip supplied with the appliance to the required depth and fit it between the plinth and the ventilation grille, pressing it into position below this grille.

• If using a 100mm plinth, fit the complete height compensation strip.

Alignment height of 870 mm

If using a 190 to 220mm plinth, make a shown.
- If using a plinth higher than 150mm but less than 190mm , cut the height compensation strip supplied with the appliance to the required depth and fit it between the plinth and the ventilation grille.
- If using a 150~mm plinth, fit the complete height compensation strip.
- If the appliance is installed at the end of a row of units, insert foot E to hold the plinth in place.

Our appliances are produced with the greatest of care. However, a defect may still occur. Our consumer services department will repair this upon request, either during or after the guarantee period. The service life of the appliance will not, however, be reduced as a result.

This declaration of guarantee terms is based on European Union Directive 99/44/EC and the provisions of the CE Civil Code. The statutory rights that the consumer has under this legislation are not affected by this declaration of guarantee terms.

This declaration does not affect the vendor's statutory warranty to the end user. The appliance is guaranteed within the context of and in adherence with the following terms.

1. In accordance with provisions laid down in paragraphs 2 to 15, we will remedy free of charge any defect that occurs within 24 months from the date the appliance is delivered to the first end user. These guarantee terms do not apply in the event of use for professional or equivalent purposes.
2. Performing the guarantee means that the appliance is returned to the condition it was in before the defect occurred. Defective parts are replaced or repaired. Parts replaced free of charge become our property.
3. So as to avoid more severe damage, the defect must be brought to our attention immediately.
4. Applying the guarantee is subject to the consumer providing proof of purchase showing the purchase and/or delivery.
5. The guarantee will not apply if damage caused to delicate parts, such as glass, synthetic materials and rubber, is the result ofles.
6. The guarantee cannot be called on for minor faults that do not affect the value or the overall reliability of the appliance.

7. The statutory warranty does not apply when defects are caused by:

8. a chemical or electrochemical reaction caused by water;

9. abnormal environmental conditions in general;
   unsuitable operating conditions;

10. contact with harsh substances.

11. The guarantee does not apply to defects due to transport which have occurred outside of our responsibility. Nor will the guarantee cover those caused by inadequate installation or assembly, lack of maintenance or failure to the assembly instructions or directions for use.

12. Defects that result from repairs or measures carried out by people who are not qualified or expert or defects that result from the addition of non-original accessories or spare parts are not covered by the guarantee.
13. Appliances that are easy to transport may be delivered or sent to the consumer services department. Home repairs are only anticipated for bulky appliances or built-in appliances .
14. If the appliances are built-in, built-under, fixed or suspended in such a way that removing and replacing them in the place where they are fitted takes more than half an hour, the costs that result therefrom will be charged for. Connected damage caused by these removal and replacement operations will be the responsibility of the user.
    12.If, during the guarantee period, repairing the same defect repeatedly is not conclusive, or if the repair costs are considered disproportionate, in agreement with the consumer, the defective appliance may be replaced with another appliance of the same value.

In this event, we reserve the right to ask for a financial contribution calculated according to the length of time it has been used.

13.A repair under guarantee does not mean that the normal guarantee period will be extended nor that a new guarantee period begins.
14. We give a twelve month guarantee for repairs, limited to the same.
15. Except in the event where liability is legally imposed, this declaration of guarantee terms excludes any compensation for damage outside the appliance for which the consumer wishes to assert his right. In the event of legally admitted liability, compensation will not exceed the purchase price paid for the appliance.

These guarantee terms are only valid for appliances purchased and used in Belgium. For exported appliances, the user must first make sure that they satisfy the technical conditions (e.g.: voltage, frequency, installation instructions, type of gas, etc.) for the country concerned, and that they can withstand the local climatic and environmental conditions. For appliances purchased abroad, the user must first ensure that they meet the qualifications required in Belgium. Non-essential or requested adjustments are not covered by the guarantee and are not possible in all cases.

Our consumer services department is always at your disposal, even after the guarantee period has expired.

Address for our consumer services department:

ELECTROLUX HOME PRODUCTS BELGIUM

Bergensesteenweg, 719 - 1502 LEMBEEK

Teél. 02.3630444

i AVERTISSEMENTS ET CONSEILS IMPORTANTS

Compartment congélateur

WAARSCHUWINGEN ADMEZEN

Opstellen