MT 9610 TONDEUSE MULTI - Electric mower GRUNDIG - Free user manual and instructions

Product type	Multi-hair trimmer
Brand	Grundig
Model	MT 9610
Power supply	1 AA 1.5 V battery (R6/UM3)
Dimensions (approx.)	14 x 3 x 3 cm
Weight (with battery)	Approximately 80 g
Usage	Nose, ears, eyebrows, beard, sideburns
Cutting heads	2 interchangeable heads (nose/ears and beard)
Switch	Slide on/off switch
Protection	Removable cap
Cleaning	Washable heads under running water
Maintenance	Dry thoroughly after cleaning
Material	ABS plastic, stainless steel blades
Battery included	No
Safety	Do not use in bath or on irritated skin
Use	Household use only
Standards	European directives 2004/108/EC and 2006/95/EC
Warranty	2 years (excluding damage due to misuse)
Repairability	Device not openable; replace heads only
Environment	Recyclable at end of life (WEEE)

Frequently Asked Questions - MT 9610 TONDEUSE MULTI GRUNDIG

How to change the battery of the Grundig MT 9610?

Turn the battery compartment cover to the left, remove it, insert an AA 1.5 V battery (positive pole facing down), then replace the cover by turning to the right until it clicks.

Can I use the trimmer in the shower or bath?

No, the device is not waterproof. Never use it in the bath, shower, or over a sink filled with water. Only the cutting head can be rinsed with water.

How to clean the cutting heads?

Turn off the device, remove the head by turning to the right, rinse it under warm running water, dry it thoroughly, and let it dry completely before putting it back on.

How long does the battery last?

The battery life depends on the frequency of use and the quality of the battery. With a new alkaline battery, you can expect several months of occasional use.

Can I use the device on irritated skin or with eczema?

No, do not use the trimmer on irritated skin, with eczema, acne or any other inflammation. This could aggravate the irritation or spread bacteria.

How to trim nose hair safely?

Attach the appropriate head (nose/ears), insert it gently into the nostril, and move the device gently to cut the hair. Do not insert too deeply.

Can I trim my eyebrows with this device?

Yes, the nose/ears head can also be used to trim and shape eyebrows. Use gentle and precise movements.

How to replace the cutting head for the beard?

Turn off the device, remove the current head by turning to the right, then attach the replacement beard head by turning to the left until it clicks.

What to do if the device jams during use?

Immediately turn off the device using the switch. Remove the cutting head, clean it to remove stuck hairs, then try again.

Can the device be used by multiple people?

It is recommended to use it on one person to prevent the spread of germs. If you must share it, clean the head thoroughly before each use.

USER MANUAL MT 9610 TONDEUSE MULTI GRUNDIG

Please note the following information when using the appliance:

The appliance is designed for domestic use only.
- Never use the appliance in the bath, shower or over a washbasin filled with water; nor should it be operated with wet hands.
- Do not immerse the appliance in water and only let the blade head come into contact with water during cleaning.
Only use the appliance on clean, dry skin. You should not apply any cream or lotion to the skin.
This appliance should only be used for removing hair in the nostrils, in the ears, the eyebrows and the beard. Any other use is expressly prohibited.
- Do not use the appliance if you suffer from acne, exema or any other skin irritations. Do not use the appliance on inflamed skin.
Inflammation of the skin is often caused by invasive bacteria. Clean the head of the trimmer before and after every use.
The appliance should only be used by one person to avoid spreading any germs.
- Never use the appliance if it is visibly damaged.

• Keep the appliance away from children.
• Never open the appliance under any circumstances.
• No warranty claims are accepted for damage caused by incorrect handling.

Environmental note

This product has been made from high-quality parts and materials which can be re-used and recycled.

Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a collection point for recycling electrical and electronic devices. This is indicated by this symbol on the product, in the operating manual and on the packaging.

Please find out about collection points operated by your local authority.

Help protect the environment by recycling used products.

Information on batteries

The battery - even if it does not contain heavy metal - may not be disposed of with household waste. Please dispose of used batteries in an environmentally responsible manner. Find out about the legal regulations which apply in your area.

Unfold page 2 so that you have the illustration in front of you.

Controls

A Detachable cap.
Sliding switch for on and off.
Blade head for trimming nose and ear hair.
Lid for battery compartment.
Replaceable blade head for trimming beard hair.

Power supply

The appliance operates with a 1 x 1.5 V, R 6/UM 3/AA battery.

1 Remove the lid to the battery compartment by turning it to the left slightly, then pull.
2 Insert a battery in the housing with its positive terminal facing downwards.
3 Put the lid back on the trimmer and turn it slightly to the right until it clicks.

Note

Take out the batteries when you know that the device will not be used for a long period of time. The manufacturer accepts no liability for damage resulting from leaking batteries.

Switching on and off

1 Remove the cap A.
2 Push the sliding switch forwards to switch on the appliance.
3 To switch off, push back the sliding switch B.
4 Clean the trimmer and put the cap A back on.

Trimming nose hair

1 Attach a suitable blade head for the trimmer and turn it to the left slightly until it latches into place.
2 Insert the blade head into your nostrils slightly.
3 Gently move the trimmer in the nostrils to cut unwanted hair.

Note

• Do not insert the trimmer blade head too deeply into your nostrils.

Trimming ear hair

1 Put the blade head into the opening of your ear.
2 Gently move the trimmer in the opening of the ear to cut unwanted hair.

Note

• You can also trim eyebrow hair.

Trimming beards, sideburns and neck hair

1 Switch off the trimmer with the sliding switch 0 .
2 Take out the blade head by turning it to the right slightly, until it clicks, then remove.
3 Attach the suitable replaceable blade head and turn it to the left slightly until it latches into place.
4 If the trimmer is blocked by thick hair while you are using it, turn it off.

Cleaning and care

1 Switch off the trimmer with the sliding switch B.
2 Take out blade head or by turning it to the right slightly, until it clicks, then remove.
3 Clean the blade head under warm, running water. Dry it well and leave it to dry out properly before you use it again.

Note

• Do not allow the housing of the trimmer to come into contact with water.

Technical data

This product fulfils the European directives 2004/108/EG and 2006/95/EG.

Power supply

1 x 1.5 V, R 6/UM 3/AA battery

Technical and design modifications reserved.

Grundig Multimedia B.V.

Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www.grundig.com