KY-PZ100BE - Surveillance Camera JVC - Free user manual and instructions

Find the device manual for free KY-PZ100BE JVC in PDF.

📄 163 pages

EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs

View the manual :

Pick your language and provide your email: we'll send you a specifically translated version.

This manual is not available in your language

Desired language Your email address

Product Type	Surveillance Camera, PTZ
Brand	JVC
Model	KY-PZ100BE
Image Sensor	1/2.8-inch Progressive CMOS
Effective Pixels	1920 x 1080 (2MP)
Minimum Illumination	0.05 lux (color)
Pan Range	360° endless
Tilt Range	-30° to 90°
Optical Zoom	20x
Digital Zoom	12x
Video Output	HD-SDI, HDMI, IP (H.264/H.265)
Power Supply	DC 12V or PoE+ (IEEE 802.3at)
Power Consumption	Max 18W
Dimensions (W x H x D)	160 x 200 x 160 mm
Weight	1.5 kg (approx.)
Operating Temperature	0°C to 40°C
Ingress Protection	IP51 (indoor use)
Main Functions	Auto tracking, preset positions, motion detection, privacy masking
Maintenance	Clean lens with soft dry cloth; avoid solvents
Safety	CE, FCC compliant; use only supplied adapter
Spare Parts	Contact JVC authorized service center for parts
General Information	Professional PTZ camera suitable for broadcast or surveillance

Frequently Asked Questions - KY-PZ100BE JVC

How do I reset the KY-PZ100BE to factory defaults?

Press and hold the RESET button (located on the rear panel) for 5 seconds using a paperclip. The camera will reboot and restore default settings.

What voltage does the KY-PZ100BE require?

The camera accepts DC 12V (2A minimum) or PoE+ (IEEE 802.3at). Do not exceed the specified voltage.

How do I connect the camera to my network?

Connect an Ethernet cable from the camera's LAN port to your network switch. The camera supports PoE for both data and power. Assign an IP address via DHCP or set it manually using the web interface.

Can I control the PTZ movements remotely?

Yes, use the supplied IR remote control, RS-232C serial interface, or the web interface. The camera also supports VISCA and Pelco-D protocols.

What is the maximum resolution and frame rate?

The camera outputs up to 1920x1080 at 60 fps (HD-SDI/HDMI) and 30 fps over IP. Lower resolutions like 720p are also supported.

How do I clean the camera lens?

Use a soft, lint-free cloth slightly dampened with lens cleaning solution. Wipe gently in circular motions. Do not use abrasive cleaners or solvents.

Does the camera support audio input?

Yes, it has a balanced audio input (XLR) for external microphones. Audio is embedded in the HDMI and SDI outputs.

How do I set up preset positions?

Move the camera to the desired position using PTZ controls, then press the PRESET button and a number (0-255) on the remote or web interface to save.

What should I do if the camera does not power on?

Check that the power supply is connected and matches specifications. If using PoE, ensure the switch provides sufficient power (PoE+). Verify the Ethernet cable is fully inserted. If still no power, contact support.

Is the camera weatherproof for outdoor use?

No, the KY-PZ100BE is designed for indoor use only (IP51). Protect it from rain and dust. For outdoor applications, use a suitable housing.

User questions about KY-PZ100BE JVC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

No questions yet. Be the first to ask one.

Download the instructions for your Surveillance Camera in PDF format for free! Find your manual KY-PZ100BE - JVC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KY-PZ100BE by JVC.

USER MANUAL KY-PZ100BE JVC

JVC Camcorder Web API Reference

Version 1.21

JVCKENWOOD Corporation

Use of this document is permitted only if you agree to the following terms.

JVCKENWOOD CORPORATION SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. JVCKENWOOD CORPORATION HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.

THIS DOCUMENT DESCRIBES APPLICATION PROGRAMMING INTERFACE TO CONTROL JVC CAMERA RECORDERS VIA NETWORK, AND IT SHALL NOT BE USED FOR ANY OTHER PURPOSE.

Version Outline
1.00 First release
1.01 Added	"GY-HM660 to the command table
	Added "3.1.15 Set streaming server settings(RTP)" command only GY-HM660.
	Added PcrJitter parameter in "3.1.18 Get streaming server settings" and "3.1.19 Set streaming server settings(UDP)" commands.
1.02 Added	"3.1.14 Set streaming server settings(RTP)" command for all cameras.
	Type "TCP" is effective in "GY-HM650" and "GY-HM660" in command with a streaming type parameter.
	Added "Variable Gain" parameter to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-LS300".
1.03 Type	TCP" is effective in "GY-HM650" in command with a streaming type parameter.
	Type "UDPN" and "UDPL" are effective in "GY-HM660" in command with a streaming type parameter.
1.04 Supported KY-PZ100 newly.
		Added "3.1.3 Set streaming framerate" command for "KY-PZ100".
		Added "3.1.6 Available streaming framerate settings" command for "KY-PZ100".
		Added "3.4. PTZ Camera Support Command" for "KY-PZ100".
		Added "3.5. How to acquire JPEG data" for "KY-PZ100".
1.05	Added "3.1.3 Set streaming framerate" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
	Added "3.1.6 Available streaming framerate settings" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
	Added "3.5. How to acquire JPEG data" for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
	Added "3.6. How to use interruptible feedback function" for "GY-HM660".
1.06 Error correction. 2.1.1. Another client is able to connect while first client is using API interface.
		3.2.2 SessionRenewal command has become obsolete.
		Added "3.6. How to use interruptible feedback function" for "GY-HM8x0".
		Type "UDPN" and "UDPL" are effective in "GY-HM8x0" in command with a streaming type parameter of "3.1.7 Available streaming bitrate settings" command.
1.07 Error correction. "3.1.10 Get streaming server settings". Revised wrong parameters. They are effective to all models.
		Error correction. "3.3.6. Set Web Button Event". Some parameters are not supported on "KY-PZ100".
		Added "MasterBlack" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
		Added "Detail" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
		Added "3.4.3 Zoom switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
		Added "3.3.10 Seesaw switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
		Added Gain event "Up1":"Down1" parameters to "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
		Added target models "GY-HM8x0", "GY-HM660", and "GY-HM200" to MenuStatus of "3.3.1 Get Camera Status"
		Added "3.7. How to control tally system" description for "GY-HM8x0", "GY-HM660", "GY-HM200", and "KY-PZ100". Changed ""3.3.5. Tally lamp control" description correspond to it.
1.08	Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM660", "GY-HM8x0", "GY-HM200", and "KY-PZ100".
	Added "3.2.6 Get NTP Status", "3.2.7 Set NTP Server", and "3.2.8 Set NTP settings" Commands for "GY-HM660", "GY-HM8x0", "GY-HM200", and "KY-PZ100".
	Supported GY-HM25x newly.
	Error correction. Added "Whb" "Status" parameter to "3.3.1. Get camera status". Changed "3.3.1. Get camera status". Parameter ("Enable" "Streaming" "On/Off") is not effective in "GY-HM200" and "GY-HM25x".
1.09 Added	"Serial" parameter to "3.2.1. Get System Information" for "GY-HM650".
	Added "3.5. How to acquire JPEG data" for "GY-HM650".
	Supported GY-HC900 newly.
1.10 for "G"	"HC900" updates as below.
	Added some resolution and bitrate parameters to "3.1. Streaming Setting Command".
	Added "Smpte2022Fec" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(RTP)".
	Added "AdaptiveBitrate" to "3.1.10. Get streaming server settings" and "3.1.14. Set streaming server settings(ZIXI)".
	Added "3.8. Return over IP Command" for "GY-HC900".
	Added "Resolution" and "FrameRate" to "3.8.3. GetReturnOverlServerSettings" and "3.8.4. SetReturnOverlServerSettings(RTSP/Zixi)".
	Added "3.8.3.1. AvailableTypeOfReturnOverIP" and "3.8.3.2. AvailableFrameRateOfReturnOverIP" commands.
	Added "IrisBar" parameter to "3.3.7. Set Web Slider Event".
	Added "Position(Iris)" parameter "3.3.1. Get camera status".
	Added "PCR Mode" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(UDP/Zixi/RTP)".
	Added "Overlay" and "Tagging" parameter to 3.2.1. Get System Information.
	Error correction. GY-HC900 does not support "Iris PushAuto" of "3.3.6 Set Web Event".
1.11 Supported GY-HC5x0 newly.
		Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC5x0".
		Added SRT parameter for "GY-HC5x0". "3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings", "3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
		Added "PCR Mode" parameter to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(UDP/Zixi/RTP)" for GY-HC5x0.
		Added "RTMPS" protocol for "GY-HC5x0". "3.1.7. Available streaming bitrate settings" and "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(RTMPS)".
1.12 Added	"3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC900".
	Added SRT parameter for "GY-HC900". "3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings", "3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
	Added "3.8. Return over IP Command" 30p/25p parameter for "GY-HC5x0".
	Added "IrisBar" parameter to "3.3.7. Set Web Slider Event" for "GY-HC5x0".
	Added "Position(Iris)" parameter "3.3.1. Get camera status" for "GY-HC5x0".
	Added "KA EN200" parameter to 3.2.1. Get System Information for "GY-HC5x0" and "GY-HC900".
	Added "422_60p" and "422_50p" parameters to each available streaming settings for "GY-HC5x0" and "GY-HC900" when "KA-EN200" is enabled. "3.1.1. Get streaming settings" and other available settings.
	Added "EXT slot information" to "3.3.1. Get camera status" for "GY-HC900".
1.13 Added	"RTMPS" protocol for "GY-HM250" and "KY-PZ100". "3.1.7. Available streaming bitrate settings", "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(RTMPS)".
	Added "3.4.6. Get Pan & Tilt Positions" command for "KY-PZ100".
	Added "Username" parameter to "3.1.13. Set streaming server settings(RTSP/RTP)" for "GY-HC5x0" and "GY-HC900".
	Error correction. GY-HC900 has supported "SRT" protocol of "3.1.10. Get streaming server settings"
1.14 Added	"RTMPS" protocol for "GY-HC900". "3.1.7. Available streaming bitrate settings", "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(RTMPS)".
	"GY-HC5x0" is support "One touch Live" on Facebook and YouTube. "3.1.7. Available streaming bitrate settings", "3.1.10. Get streaming server settings".
	"GY-HC900" and "GY-HC5x0" are support "ZIXI" parameter on streaming type of ZIXI. "3.1.7. Available streaming bitrate settings", "3.1.10. Get streaming server settings".
	Portrait Resolution supported in "GY-HC5x0". "3.1.1. Get streaming settings", "3.1.2. Set streaming resolution", "3.1.5. Available streaming resolution settings" and "3.1.6. Available streaming framerate settings".
	Error correction. Corrected Parameter member AES-196 to AES-192 in "SRT" protocol. "3.1.10. Get streaming server settings", "3.1.18. Set streaming server settings(SRT)" Added "and SRT Listener mode" cause of streaming error status. "3.3.1 Get camera status", "3.4.5 Get camera status (for remote controller)" Added "RTP" protocol was Missing description. "3.1.7. Available streaming bitrate settings", "3.1.10. Get streaming server settings" Added Explanation of White balance scale and position for "KY-PZ100". "3.3.1. Get camera status" Corrected Parameter key "OnePush" to "Awb", "OnePushTrigger" to "AwbTrigger" for "KY-PZ100". 3.4.5 Get camera status (for remote controller)
1.15 Added	"StreamId", "FEC", "PCRMode", and "AdaptiveBitrate parameters to "3.1.10. Get streaming server settings"/"3.1.18. Set streaming server settings(SRT)" for "GY-HC5x0" and "GY-HC900".
	Support Return over IP streaming type SRT. "3.8.3. GetReturnOverIpServerSettings" / "3.8.8. SetReturnOverIpServerSettingsSRT" / "3.8.3.1. AvailableTypeOfReturnOverIP" for "GY-HC5x0" and "GY-HC900".
	Error correction. Corrected encode size parameter "320x181" to "320x180", "3.5.2. Set JPEG encode size" Corrected parameter style "String" to "Integer" in SRT DstPort. "3.1.10. Get streaming server settings" Parameter Button Fullauto event is no support in "KY-PZ100". "3.3.6. Set Web Button Event" Corrected to no space in "2.3 Response form" return value.
1.16 Supported	GY-HM280 newly.
1.17 Supported	KY-PZ400 newly.
1.18 Supported	KY-PZ200 newly.
1.19 Supported	KY-PZ510 newly.
	The following Request Params support String in addition to Integer (for PZ100/400/200). 3.4.1 SetPTCtrl: PanPosition, TiltPosition, PanSpeed, TiltSpeed 3.4.3 ZoomSwitchOperation: Speed 3.4.4 SetPTZPreset: No
	Error correction. 3.1.10. Get streaming server settings: PZ400/200 does not support Username and Password in Type of RTSP. 3.1.21. GetVideoSettings: Change param name from EncodeLevel to VideoEncodeLevel. 3.2.1 GetSystemInfo: Model in Response was duplicated. 3.3.1 GetCamStatus: PZ100 does not support "Auto" / "Indoor" / "Outdoor" in Whb Status and does not support Bright . 3.4.5 GetCamStatusMinimum: Corrected wrong description word from "Streaming" to "Detail".
1.19.1 Error correction.	3.1.1. GetStreamingSettings: Add PZ510 to 3840x2160 resolution of Response. Add notes of some resolution for PZ510. 3.1.2. SetStreamingResolution: Add PZ510 to 3840x2160 resolution of Request. Add notes of some resolution for PZ510. 3.1.4 SetStreamingBitrate: Correct typo in command description. 3.1.6 AvailableStreamingFramerateSettings: Correct typo in Example. 3.1.10 GetStreamingServerSettings: Correct typo in Example. 3.1.16 SetStreamingServerSettingsRTMPS: Correct typo in Example. 3.1.19, 3.1.20, 3.1.22, 3.1.23, 3.1.24, 3.1.26: Correct typo in command description. 3.2.6 GetNTPStatus: Correct typo in Status of Response from "-tSyncronized" to "Not Syncronized". 3.2.8 SetNTPSettings: Add range of value. 3.3.9 GetGPSInfo: Correct typo in Example. 3.4.1 SetPTCtrl: Correct typo in Example. 3.4.5 GetCamStatusMinimum: Correct typo in Example. 3.4.6 GetPTPosition: Correct typo in Example. 3.7.3. Relation of commands on Studio tally system: Add notes for PZ510. 3.8.4 SetReturnOverIpServerSettingsRTSP: Correct typo in Example. 3.8.5 SetReturnOverIpServerSettingsZIXI: Correct typo in Example.
1.20 Added params.	3.2.10. SystemRequest: Added Restore params.

1.21

Supported auto tracking newly:

3.9 Auto Tracking Command: Added new chapter.

3.3.1. GetCamStatus : Add the following to the response

Data/Tracking

Data/TrackingMode

Data/TrackingBoundingBox

Enable/Tracking

Enable/TrackingMode

Enable/TrackingBoundingBox

3.4.2 JoyStickOperation : Add description for auto tracking.

3.4.5.GetCamStatusMinimum:Add the following to the response

Data/Tracking

Data/TrackingMode

Enable/Tracking

Enable/TrackingMode

Other new features:

3.2.10. SystemRequest : Add "Restore" param for request. It works the same as RESTORE in the WebUI.

Error correction.:

3.4.5 GetCamStatusMinimum : "PowerStatus" in Example has been corrected to "VideoOutputStatus" due to typo.

1. Outline

1.1. Specification

2. Interface

2.1. Authentication

2.2. Request form

2.3. Response form

3. Command

3.1. Streaming Setting Command

3.1.1. Get streaming settings
3.1.2. Set streaming resolution
3.1.3. Set streaming framerate
3.1.4. Set streaming bitrate
3.1.5. Available streaming resolution settings
3.1.6. Available streaming framerate settings
3.1.7. Available streaming bitrate settings
3.1.8. Get current streaming server number
3.1.9. Set current streaming server number
3.1.10. Get streaming server settings
3.1.11. Set streaming server settings(UDP)
3.1.12. Set streaming server settings(TCP)
3.1.13. Set streaming server settings(RTSP/RTP)
3.1.14. Set streaming server settings(ZIXI)
3.1.15. Set streaming server settings(RTMP)
3.1.16. Set streaming server settings(RTMPS)
3.1.17. Set streaming server settings(RTP)
3.1.18. Set streaming server settings(SRT)
3.1.19. Set Streaming Encode Protocol
3.1.20. Set Streaming I Key Frame Interval
3.1.21. Get Video Settings
3.1.22. Set Video HDMI/SDI Output
3.1.23. Set Video Format
3.1.24. Set Video Encode Level
3.1.26. Set Network Multicast Settings
3.1.27. Set NDI Settings
3.1.28. Set MPEG2-TS Settings

3.2. System Command

3.2.1. Get System Information

3.2.2. Session renewal

3.2.3. Get preset zoom position

3.2.4. Set preset zoom position

3.2.5. Set tally lamp priority

3.2.6. Get NTP Status

3.2.7. Set NTP Server

3.2.8. Set NTP Settings

3.2.9. Get NTP Settings

3.3.3. Set zoom position ( obey preset zoom settings of camera )

3.3.4. Live streaming

3.3.5. Tally lamp control

3.3.6. Set Web Button Event

3.3.7. Set Web Slider Event

3.3.8. Set Web XYField Event

3.3.9. Get GPS Information

3.3.10. Seesaw switch operation

3.4. PTZ Camera Support Command

3.4.1. Set Pan Tilt Control

3.4.2. Joystick Operation

3.4.3. Zoom switch operation

3.4.4. Set Pan / Tilt / Zoom preset

3.4.5. Get camera status (for remote controller)

3.4.6. Get Pan & Tilt Positions

3.5. How to acquire JPEG data

3.5.1. JPEG encode control

3.5.2. Set JPEG encode size

3.5.3. Acquire JPEG data

3.6. How to use Interruptible Feedback Function

3.6.1. Get interruptible feedback settings

3.6.2. Set interruptible feedback settings

3.6.3. Set interruptible feedback streaming control

3.7. How to control Studio Tally System

3.7.1. Studio tally control

3.7.2. Set tally lamp priority

3.7.3. Relation of commands on Studio tally system

3.7.4 Sequence of studio tally system

3.8. Return over IP Command

3.8.1. GetCurrentReturnOverIpServerID

3.8.2. SetCurrentReturnOverIpServerID

3.8.3. GetReturnOverIpServerSettings

3.8.3.1. AvailableTypeOfReturnOverIP

3.8.3.2. AvailableFrameRateOfReturnOverIP

3.8.4. SetReturnOverIpServerSettingsRTSP

3.8.5. SetReturnOverIpServerSettingsZIXI

3.8.6.SetReturnOverIpServerSettingsIcecast

3.8.7.SetReturnOverIpCtrl

3.8.8. SetReturnOverIpServerSettingsSRT

3.9 Auto Tracking Command

3.9.1. Set Auto Tracking On/Off

3.9.2. Set Auto Tracking Mode

3.9.3. Set Auto Tracking Bounding Box

3.9.4. Get Auto Tracking Settings of Standard Mode

3.9.5. Set Auto Zoom of Standard Mode of Auto Tracking

3.9.6. Set Auto Tilt of Standard Mode of Auto Tracking

3.9.7. Set Target Retention Time of Standard Mode of Auto Tracking

3.9.8. Set Figrue Size of Standard Mode of Auto Tracking

3.9.9. Set Vertical Position of Standard Mode of Auto Tracking

3.9.10. Set Horizontal Position of Standard Mode of Auto Tracking

3.9.11. Set Tracking Start Position of Standard Mode of Auto Tracking

3.9.12 Get Auto Tracking Settings of Area Mode

3.9.13 Execute Set/Delete Starting Area of Area Mode of Auto Tracking

3.9.14. Set Target Retention Time of Area Mode of Auto Tracking

3.9.15. Set Tracking Starting Area of Area Mode of Auto Tracking

3.9.16 Get Auto Tracking Settings of Stage Mode

3.9.17 Execute Set/Delete Position of Stage Mode of Auto Tracking

3.9.18. Set Target Retention Time of Stage Mode of Auto Tracking

3.9.19. Set Horizontal Position of Stage Mode of Auto Tracking

3.9.20 Get Auto Tracking Settings of Wide Area Mode

3.9.21 Execute Set/Delete Position of Wide Area Mode of Auto Tracking

3.9.22. Set Auto Zoom of Wide Area Mode of Auto Tracking

3.9.23. Set Auto Tilt of Wide Area Mode of Auto Tracking

3.9.24. Set Target Retention Time of Wide Area Mode of Auto Tracking

3.9.25. Set Figrue Size of Wide Area Mode of Auto Tracking

3.9.26. Set Vertical Position of Wide Area Mode of Auto Tracking

3.9.27. Set Horizontal Position of Wide Area Mode of Auto Tracking

3.9.28. Set Tracking Start Position of Wide Area Mode of Auto Tracking

3.9.29 Get Auto Tracking Settings of Fine Adjustment Mode

3.9.30. Set Auto Zoom of Fine Adjustment Mode of Auto Tracking

3.9.31. Set Auto Tilt of Fine Adjustment Mode of Auto Tracking

3.9.32. Set Tracking Duration Time of Fine Adjustment Mode of Auto Tracking

3.9.33. Set Figrue Size of Fine Adjustment Mode of Auto Tracking

3.9.34. Set Vertical Position of Fine Adjustment Mode of Auto Tracking

3.9.35. Set Horizontal Position of Fine Adjustment Mode of Auto Tracking

3.9.36 Get All Detected Objects

3.9.37. Set Tracking Target

1.1. Specification

This API specification describes commands to control JVC cameras via network.

Following commands are available.

Setting command - Configure camera settings

System command - Perform the information of the camera, the update of the session

, the memory of the value

Camera control command - Control camera

PTZ camera control command - Control PTZ camera

JPEG data acquisition command - Acquire JPEG data.

Interruptible feedback settings - Configure IFB settings

Studio tally control command - Control studio tally display.

Return over IP command - Return over IP Settings and Control.

* Some API commands may be restricted by camera model and software version.

* Supported API functions are depends on the API version of the camera.

Version information can be obtained with the command 'Get System Information'.

Supported camera model and firmware version.

Firmware Version

API Version	GY-HM650	GY-HM660	GY-HM8x0	GY-HM200	GY-HM25x	GY-HM280	GY-LS300 KY-PZ100 GY-HC900	GY-HC6x0 KY	PZ400 KY-PZ200 KY-PZ510
1.00	V0404 - V0203	0060 V0203-0136 -- V0203-0132 ----
1.01	- V0100-0049	----
1.02	-- V0300-0067	V0300-0150 -- V0300-0143 ----
1.03	- V0102-0067	----
1.04	---- V0100-0076 ----
1.05	- V0105-0086 V0301-0076 V0305-0182 -- V0302-0151 V0101-0093 ----
1.06	-- V0303-0084	----
1.07	- V0110-0111 V0305-0090 V0309-0213 -- V0102-0103 ----
1.08	- V0112-0136 V0307-0098 V0313-0230 V0100-0007 -- V0104-018 ----
1.09	V0412 ---- - V0101-0121 ----
1.10	---- V0220-0217 V0102-0145 ----
1.11	---- V010-0148 ----
1.12	---- V0300-0250 V0120-0166 ----
1.13	---- V0106-0022 -- V0200-0138 ----
1.14	----							V0400-0268	V0200-0201 ----
1.15	----							V0410-0277	V0220-0232 ----
1.16	---- V0202-0034 ----
1.17	----									V1.1.98	-
1.18	----										V1.1.20
1.19	----
1.20	----									V1.2.46	V1.1.53
1.21	----										V3.0.12

^ This list shows a API version number which is returned by each firmware.
Newest API document supports most recent firmware on all models.

NOTE: Examples for each Request/Response are just for your reference.

Please replace it with the correct API call according to the model you are using.

2. Interface

Support HTTP protocol

API command request/response uses HTTP protocol.

A request uses a port number 80 with default setting. It may change if the web port setting on the camera menu is modified.

Requests and response data are described with JSON format in HTTP message body.

2.1. Authentication

Digest authentication

Username/password authorization is needed on first access to the camera.

It returns 'Session ID' to the client after authorization.

The client can access without authorization by using this 'Session ID'.

'Session ID' will expire within 30 seconds.

It has to be extended using 'SessionRenewal' command.

Authentication process has to be performed to obtain another 'Session ID' after expiration.

Please refer to RFC2617 for more information.

Procedure

(1)Access to an authentication page of a server from the client.

Example

GET /api.php HTTP/1.1\r

Host: 192.168.0.134\rin

User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:27.0) Gecko/20100101 Firefox/27.0\rIn

Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8\rin

Accept-Language: ja,en-us;q=0.7,en;q=0.3\r\n

Accept-Encoding: gzip, deflate\r\n

Connection: keep-alive\rin

(2) The response for authentication is returned to a client.

Example

HTTP/1.1 401 Unauthorized\rin

WWW-Authenticate: Digest realm="GY-HM650",

nonce="7a63056b0a608017c405707e682b9adb", qop="auth"irin

Content-Type: text/html\rin

Content-Length: 1458irln

Date: Tue, 03 Mar 2015 11:35:13 GMTIn

Server: CameralrIn

lrln

(3)The client re-access with the authentication information (user name and password) to the authentication page

Example

GET /api.php HTTP/1.1\r\n

Host: 192.168.0.134\r\n

User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:27.0) Gecko/20100101 Firefox/27.0\rIn

Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8\rIn

Accept-Language: ja,en-us;q=0.7,en;q=0.3\r\n

Accept-Encoding: gzip, deflate\r\n

Connection: keep-alive\r\n

Authorization: Digest username="prohd", realm="GY-HM650",

nonce="7a63056b0a608017c405707e682b9adb", uri="/api.php",
response="0f4d23f739a0e9fa3b78b826b33edaf8", qop=auth, nc=00000001,
cnonce="ee16206547e4dd0e"irin

\in

(4) Session ID is returned form the camera.

Example

HTTP/1.1 302 Found\r\n

Status: 302 Moved Temporarily\r\n

Expires: Thu, 19 Nov 1981 08:52:00 GMT|r|n

Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0\rin

Pragma: no-cache\rin

Set-Cookie: SessionID=10ffa8dcd1bb1cf5f9c252b7b8a20738\r\n

Content-type: text/html; charset=UTF-8\r\n

Transfer-Encoding: chunked\r\n

Date: Tue, 03 Mar 2015 11:35:23 GMT\r\n

Server: Camerarin

urn to (2) in authentication failure.

* Another client cannot connect while first client is using API interface.

2.2. Request form

Hypertext Transfer Protocol

Example

POST /cgi-bin/api.cgi HTTP/1.1\r\n

Host: 192.168.0.134\r\n

User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:27.0) Gecko/20100101 Firefox/27.0\rIn

Accept: application/json, text/javascript, */; q=0.01\r\n

Accept-Language: ja,en-us;q=0.7,en;q=0.3\r\n

Accept-Encoding: gzip, deflate\r\n

Content-Type: application/x-www-form-urlencoded; charset=UTF-8\rin

X-Requested-With: XMLHttpRequest\rin

Referer: http://192.168.0.134/api.php\r\n

Content-Length: 86\r\n

Authorization: Digest username="prohd", realm="GY-HM650",
nonce="7a63056b0a608017c405707e682b9adb", uri="/cgi-bin/api.cgi",
response="c412878c40aa4d4943af678c2ba070b1", qop=auth, nc=0000001a,
cnonce="3c706c583d858603"\r\n

Connection: keep-alive\rin

Pragma: no-cache\rin

Cache-Control: no-cache\rin

lrln

HTML Form URL Encoded: application/x-www-form-urlencoded

Camera cannot accept any space character or newline within command string.

Key		Style Value
Request
	Command String (Command name)
	SessionID String		(Session ID in cookie.)
	Params (You can omit this field if there is no parameter.)
	* *

Example

{

"Request": {

"Command":"GetSystemInfo",

"SessionID":"10ffa8dcd1bb1cf5f9c252b7b8a20738"

}

2.3. Response form

Hypertext Transfer Protocol

Example

HTTP/1.1 200 OK\lr\nContent-type: application/json\lr\nPragma: no-cache\lr\nCache-Control: no-cache\lr\nExpires: Thu, 01 Dec 1994 16:00:00 GMT\lr\nContent-Length: 105\r\nDate: Tue, 03 Mar 2015 11:35:30 GMT\lr\nServer: Cameraln\lr\n

JavaScript Object Notation: application/json

Actual response from camera does not include any space character or newline.

Key Style Value
Response
	Requested String (Command name)
	Result String	Result of command processingSuccess /DisableError(Timeout) /RequestedError(Illegal parameter error) /FormatError(Illegal request error) /CommandError(Illegal command error) /SessionError(Authentication error) /DualExeError(Duplicate command) /Failed(Other error)
	Data (You can omit this field if there is no parameter.)
	* *

Example

{

"Response": {

"Requested": "GetSystemInfo",

"Result": "Success",

"Data": {

"Model": "HM650",

"Destination": "EU",

"ApiVersion": "0.13.3"

}

3. Command

3.1. Streaming Setting Command

When you change a part of these parameters, you should get all parameters first, then modify and store them again.

Setting commands should be used only when settings need to be changed, otherwise it causes performance degradation.

Zixi and SRT streaming modes are mutually exclusive on GY-HC5x0 and GY-HC900.

Only "Zixi" or "Srt" parameter is effective according to the streaming mode.

Current mode can be checked using GetSystemInfo response.

3.1.1. Get streaming settings

Get the streaming setting

Request Key Style
Value

Request
	Command	String	GetStreamingSettings / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . / . /
	SessionID	String	(Session ID in cookie.)
	Params
	Stream	Integer	0: First, 1: Second

Example Example(In case of PZ400/200/510)

"Request": { "Request": {

"Command": "GetStreamingSettings",

"SessionID": "7425f0cb58ee4d15dd4c15ace4299a3"

"Params": {

"Stream": 0

"Command": "GetStreamingSettings"

"SessionID": "7425fbb58ee4d15004c1f5ace4299a3"

Response Key Style
Value

Response

Requested

String

GetStreamingSettings / ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Result

String

(Result of command processing.) ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Data

Stream

Integer

0: First, 1: Second

✓

Resolution

String

"3840x2160" (PZ400/510: First stream only)

✓

"1920x1080" (PZ400/200/510: First stream only) / ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

"1440x1080" - - - - - - - - - - -

"1280x720" (PZ400/200/510: First stream only) / ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

"1024x576" (PZ400/200/510: First stream only)

✓

"720x480"

✓

"720x576"

✓

"720x408"

✓

"640x480"

✓

"640x360"

✓

"480x320"

✓

"480x270" / - - - - - - - - - -

"320x240"

✓

"1080x1080"

✓

"606x1080"

✓

"720x720"

✓

"404x720"

✓

Framerate

String

"60p" / "50p" / "60p" / "50p" / "30p" / "25p" /

✓

"422_10bit_60p" / "422_10bit_50p"

✓

Character string for Framerate value "1" - "60"

✓

Bitrate

String

"0.2M"

✓

"0.3M"

✓

"0.8M"

✓

"1.5M"

✓

"2.5M"

✓

"3.0M"

✓

"5.0M"

✓

"8.0M"

✓

"10M"

✓

"12M"

✓

"16M"

✓

"20M"

✓

"24M"

✓

Character string for Bitrate bps value "32K" - "61440K" (This parameter is valid only H.264/H.265 mode.)

✓

Ofactor

String

Character string for quality factor value "1" - "99" (This parameter is valid only MJPEG mode.)

✓

EncodeProtocol

String

"H264" / "H265" / "MJPEG"

✓

IKeyFrameInterval

Integer

Value of I Key Frame Interval 2 - 60

✓

BitRateControl

String

"CBR" : "VBR"

✓

* Framerate "422 10bit 60p" and "422 10bit 50p" are effective only if optional adaptor "KA—EN200" is attached on 'GY—HC900' and 'GY—HC5x0'.
* Character string for Framerate value for PZ400/200/510: If the Video setting is 59.94/29.27, then 60=59.94 and 30=29.97.

Example Example (In case of H.264/H.265 for PZ400/200/510) Example (In case of MJPEG for PZ400/200/510)

{{"
"Response": { "Response": { "Response": {
"Requested": "GetStreamingSettings",
"Result": "Success",
"Data": { "Data": { "Data": {
"Resolution": "1920x1080", "Stream": 0, "Stream": 0,
"Framerate": "60",
"Bitrals": "3.0M"
} "Siterate": "4096K", "Ofactor": "80",
} "EncodeProtocol": "H264", "EncodeProtocol": "MJPEG",
}}
"Requested": "GetStreamingSettings",
"Result": "Success",
"Resolution": "1920x1080", "Resolution": "1920x1080",
"Framerate": "60",
"KeyFrameInterval": 30,
"BitRateControl": "CBR"
} }
}/{ }

3.1.2. Set streaming resolution

Set streaming resolution

Camcorder automatically rebools with this command on HM650, HM660, and HM8x0.

Current value can be obtained with the 'AvailableStreamingResolutionSettings' command.

Request Key Style
Value

Request

Command

String

SetStreamingResolution √ √ √ √ √ √ √ √ √ √ √

SessionID

String

(Session ID in cookie.)

√

Params

Stream

Integer

0: First, 1: Second

√

Resolution

String

"3840x2160" (PZ400/510: First stream only)

√

"1920x1080" (PZ400/200/510: First stream only) √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∩ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∟ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∥ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∧ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∿ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∎ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∵ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∂ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∤ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∩ \text { }

Framerate is fixed by resolution.(HM650/HM660/HM8x0/HM200/HM25x/LS300)

Example

"Request": {

"Command": "SetStreamingResolution",

"SessionID": "7425fcbc58ee4d16dd4c1f5ace4299a3",

"Params": {

"Resolution": "1920x1080"

}

Example(In case of PZ400/200/510)

"Request":{

"Command": "SetStreamingResolution".

"SessionID": "7425fbb58ee4d15db4c15ace4299a3",

"Params": {

"Stream": 0,

"Resolution": "1920x1080"

}

Response Key Style
Value

Current value can be obtained with the 'AvailableStreamingFramerateSettings' command.

Request Key Style
Value

Request

Command

Siring

SetStreamingFramerate

✓

SessionID

Siring

(Session ID in cookie.)

✓

Params

Stream

Integer

0: First, 1: Second

✓

Framerate

Siring

"60p" / "50p" / "60" / "50l" / "30p" / "25p" /

✓

"422 10bit 60p" / "422 10bit 50p"

✓

Character string for Framerate value "1" - "60"

✓

* Framerate "422 10bit 60p" and "422 10bit 50p" are effective only if optional adaptor "KA—EN200" is attached on 'GY—HC900' and 'GY—HC5x0'.
* Character string for Framerate value for PZ400/200/510 : If the Video setting is 59.94/29.27, then 60=59.94 and 30=29.97.

Example Example(In case of PZ400/200/510)

"Request": { "Request": {

"Command": "SetStreamingFramerate",

"SessionID": "7425fcbc58ce4d15dc4c15ace4299a3",

"Params": { "Params": {

"Framerate": "30p"

}

"Command": "SetStreamingFramerate".
"SessionID": "7425fbcb58ee4d15db4c1f5ace4299a3",
"Stream": 0,
"Framerate": "30"
j

Response
Value

Response

Requested

String

SetStreamingFramerate

✓

Result

String

(Result of command processing.)

✓

Example

{

"Response": {

"Requested": "SetStreamingFramerate",

"Result": "Success"

}

3.1.4. Set streaming bitrate

Set streaming bitrate

Current value can be obtained with the 'AvailableStreamingBitrateSettings' command.

This command does not reboot the camcorder unlike 'Set streaming resolution' command.

Request Key Style
Value

Request

Command

String

SetStreamingBitrate √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∩ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∥ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∎ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∟ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∿ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∧ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∼ √ (√)

SessionID

String

(Session ID in cookie.)

√

✓

√

✗

√

○

√

□

√

Params

Stream

Integer

0: First, 1: Second

Bitrate

String

"0.2M" √ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

√

"0.3M" √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∘ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

"0.8M" √ √ √ √ √ √ √ √ √ √ √ √ √ √ \sqrt{√} - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - .

"1.5M" √ √ √ √ √ √ √ √ \sqrt{√} - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

"2.5M" √ √ √ \sqrt{√} - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

"3.0M" √ √ \sqrt{√} -√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√苑 ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√)(√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (√) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∮) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∭) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∆) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∅) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∵) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∪) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (�b) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∑) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∏) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∽) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∸) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (�lt) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (�ll) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∛) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∻) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (�le) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (�ve) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (�be) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (∬) ~√ (�}(a + b + c + d + e + f + g + h + i + j + k + l + m + n + o + p + q + r + s + t + u + v + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y +z + w + x + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z +w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x +y + x + y + z + w + x + y + z + w + y + z + w + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w + y + z + w + x + y + z + w +

*In case of PZ400/200/510, BitRateControl are always needed. The corresponding Value of Bitrate and Qfactor is used depending on the mode.
*In case of PZ400/200/510, This settings specified in each Params item must be set in the camera after a reboot.

Example Example(In case of PZ400/200/510)

{
    "Request": {"Request": {
    "Command": "SetStreamingBitrate",
    "SessionID": "7425b0c68ee4d1504c1f5ace4299a3",
    "Params": {"Params": {
    "Bitrate": "3.0M"
    }
    }
    }
    "BitRateControl": "CBR"
}

{
    "Command": "SetStreamingBitrate",
    "SessionID": "7425fccb58ee4d15dd4c15ace4299a3",
    "Stream": 0,
    "Bitrate": "4096k",
    "Ofactor": "80",
    }
}

Response Key Style
Value

Response

Requested

Siting

Set:StreamingBitrate √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∵ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∎ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∩ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∝ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∤ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∕ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∎ (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (Continued) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞)(Continued) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (Continuing) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞), (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (∞) (\texttt {f o r} [0, 0] [1, 2]) [3, 4]) [5, 6] [7, 8] [9, 10] [11, 12] [13, 14] [15, 16] [17, 18] [19, 20] [21, 22] [23, 24] [25, 25] [27, 26] [29, 27] [31, 32] [33, 33] [35, 35] [37, 36] [39, 37] [41, 41] [43, 43] [45, 44] [46, 44] [48, 44] [49, 44] [51, 51] [53, 53] [55, 53] [57, 53] [59, 53] [61, 61] [63, 63] [65, 63] [67, 63] [69, 63] [71, 71] [73, 73] [75, 73] [77, 73] [79, 73] [81, 81] [83, 83] [85, 83] [87, 83] [89, 83] [91, 91] [93, 91] [95, 91] [97, 91] [99, 91] [101, 101] [103, 103] [105, 105] [107, 107] [109, 109] [111, 111] [113, 113] [115, 115] [117, 117] [119, 119] [121, 121] [123, 123] [125, 125] [127, 127] [129, 129] [131, 131] [133, 133] [135, 135] [137, 137] [139, 139] [141, 141] [143, 143] [145, 145] [147, 147] [149, 149] [151, 151] [153, 153] [155, 155] [157, 157] [159, 159] [161, 161] [163, 163] [165, 165] [167, 167] [169, 169] [171, 171] [173, 173] [175, 175] [177, 177] [179, 179] [181, 181] [183, 183] [185, 185] [187, 187] [189, 189] [191, 191] [193, 193] [195, 195] [197, 197] [199, 199] [201, 201] [203, 203] [205, 205] [207, 207] [209, 209] [211, 211] [213, 213] [215, 215] [217, 217] [219, 219] [221, 221] [223, 223] [225, 225] [227, 227] [229, 229] [231, 231] [233, 233] [235, 235] [237, 237] [239, 239] [241, 241] [243, 243] [245, 245] [247, 247] [249, 249] [251, 251] [253, 253] [255, 255] [257, 257] [259, 259] [261, 261] [263, 263] [265, 265] [267, 267] [269, 269] [271, 271] [273, 273] [275, 275] [277, 277] [279, 279] [281, 281] [283, 283] [285, 285] [287, 287] [289, 289] [291, 291] [293, 293] [295, 295] [297, 297] [299, 299] [301, 301] [303, 303] [305, 305] [307, 307] [309, 309] [311, 311] [313, 313] [315, 315] [317, 317] [319, 319] [321, 321] [323, 323] [325, 325] [327, 327] [329, 329] [331, 331] [333, 333] [335, 335] [337, 337] [339, 339] [341, 341] [343, 343] [345, 345] [347, 347] [349, 349] [351, 351] [353, 353] [355, 355] [357, 357] [359, 359] [361, 361] [363, 363] [365, 365] [367, 367] [369, 369] [371, 371] [373, 373] [375, 375] [377, 377] [379, 379] [381, 381] [383, 383] [385, 385] [387, 387] [389, 389] [391, 391] [393, 393] [395, 395] [397, 397] [399, 399] [401, 401] [403, 403] [405, 405] [407, 407] [409, 409] [411, 411] [413, 413] [415, 415] [417, 417] [419, 419] [421, 421] [423, 421] [425, 421] [427, 421] [429, 421] [431, 431] [433, 433] [435, 435] [437, 437] [439, 439] [441, 441] [443, 443] [445, 445] [447, 447] [449, 449] [451, 451] [453, 453] [455, 455] [457, 457] [459, 459] [461, 461] [463, 463] [465, 465] [467, 467] [469, 469] [471, 471] [473, 473] [475, 475] [477, 477] [479, 479] [481, 481] [483, 483] [485, 485] [487, 487] [489, 489] [491, 491] [493, 493] [495, 495] [497, 497] [499, 499] [501, 501] [503, 503] [505, 505] [507, 507] [509, 509] [511, 511] [513, 513] [515, 515] [517, 517] [519, 519] [521, 521] [523, 523] [525, 525] [527, 527] [529, 529] [531, 531] [533, 533] [535, 535] [537, 537] [539, 539] [541, 541] [543, 543] [545, 545] [547, 547] [549, 549] [551, 551] [553, 553] [555, 555] [557, 557] [559, 559] [561, 561] [563, 563] [565, 565] [567, 567] [569, 569] [571, 571] [573, 573] [575, 575] [577, 577] [579, 579] [581, 581] [583, 583] [585, 585] [587, 587] [589, 589] [591, 591] [593, 593] [595, 595] [597, 597] [599, 599] [601, 601] [603, 603] [605, 605] [607, 607] [609, 609] [611, 611] [613, 611] [615, 611] [617, 611] [619, 611] [621, 621] [623, 623] [625, 623] [627, 627] [629, 629] [631, 631] [633, 633] [635, 635] [637, 637] [639, 639] [641, 641] [643, 643] [645, 645] [647, 647] [649, 649] [651, 651] [653, 653] [655, 655] [657, 657] [659, 659] [661, 661] [663, 663] [665, 665] [667, 667] [669, 669] [671, 671] [673, 673] [675, 675] [677, 677] [679, 679] [681, 681] [683, 683] [685, 685] [687, 687] [689, 689] [691, 691] [693, 693] [695, 695] [697, 697] [699, 699] [701, 701] [703, 703] [705, 705] [707, 707] [709, 709] [711, 711] [713, 713] [715, 715] [717, 717] [719, 719] [721, 721] [723, 723] [725, 725] [727, 727] [729, 729] [731, 731] [733, 733] [735, 735] [737, 737] [739, 739] [741, 741] [743, 743] [745, 745] [747, 747] [749, 749] [751, 751] [753, 753] [755, 755] [757, 757] [759, 759] [761, 761] [763, 763] [765, 765] [767, 767] [769, 769] [771, 771] [773, 773] [775, 775] [777, 777] [779, 779] [781, 781] [783, 783] [785, 785] [787, 787] [789, 789] [791, 791] [793, 793] [795, 795] [797, 797] [799, 799] [801, 801] [803, 803] [805, 805] [807, 807] [809, 809] [811, 811] [813, 811] [815, 811] [817, 811] [819, 811] [821, 821] [823, 821] [825, 821] [827, 821] [829, 821] [831, 831] [833, 831] [835, 831] [837, 831] [839, 831] [841, 841] [843, 841] [845, 841] [847, 841] [849, 841] [851, 851] [853, 851] [855, 851] [857, 851] [859, 851] [861, 861] [863, 861] [865, 861] [867, 861] [869, 861] [871, 871] [873, 871] [875, 871] [877, 871] [879, 871] [881, 881] [883, 881] [885, 881] [887, 881] [889, 881] [891, 891] [893, 891] [895, 891] [897, 891] [899, 891] [901, 901] [903, 901] [905, 901] [907, 901] [909, 901] [911, 901] [913, 901] [915, 901] [917, 901] [919, 901] [921, 901] [923, 901] [925, 901] [927, 901] [929, 901] [931, 901] [933, 901] [935, 901] [937, 901] [939, 901] [941, 901] [943, 901] [945, 901] [947, 901] [949, 901] [951, 901] [953, 901] [955, 901] [957, 901] [959, 901] [961, 901] [963, 901] [965, 901] [967, 901] [969, 901] [971, 901] [973, 901] [975, 901] [977, 901] [979, 901] [981, 901] [983, 901] [985, 901] [987, 901] [989, 901] [991, 901] [993, 901] [995, 901] [997, 901] [999, 901] [1001, 901]

Example

{

"Response": {

"Requested": "SetStreamingBitrate",

"Result": "Success"

}

3.1.5. Available streaming resolution settings

Get available streaming resolution settings

Settable values are depend on the recording resolution setting of the camcorder.

Request Key Style
Value

Response

Requested

Siting

AvailableStreaming{ResolutionSettings✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Result

Siting

{Result of command processing.} ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Data

Stream

Integer

0: First, 1: Second

✓

AvailableResolution✓ ✓

✓ ✓

✓ ✓ ✓ ✓ ✓ ✓ ✓

3840x2160

Integer

0: unselectable , 1: selectable (PZ400/510: First stream only)

✓

1920x1080

Integer

0: unselectable , 1: selectable (PZ400/200/510: First stream only)

✓

1440x1080

Integer

0: unselectable , 1: selectable

1280x720

Integer

0: unselectable , 1: selectable (PZ400/200/510: First stream only)

✓

1024x576

Integer

0: unselectable , 1: selectable (PZ400/200/510: First stream only)

✓

720x480

Integer

0: unselectable , 1: selectable

✓

720x576

Integer

0: unselectable , 1: selectable

✓

720x408

Integer

0: unselectable , 1: selectable

✓

640x480

Integer

0: unselectable , 1: selectable

✓

640x360

Integer

0: unselectable , 1: selectable

✓

480x320

Integer

0: unselectable , 1: selectable

✓

480x270

Integer

0: unselectable , 1: selectable

✓

320x240

Integer

0: unselectable , 1: selectable

✓

1080x1080

Integer

0: unselectable , 1: selectable

✓

606x1080

Integer

0: unselectable , 1: selectable

✓

720x720

Integer

0: unselectable , 1: selectable

✓

404x720

Integer

0: unselectable , 1: selectable

✓

Example Example(In case of PZ400/200/510)

{
    "Response": { "Response": {
    "Requested": "AvailableStreamingResolutionSettings",
    "Result": "Success", "Result": "Success",
    "Data": { "Data": {
    "AvailableResolution": {
    "1920x1080": 1,
    "1440x1080": 0, "3840x2160": 1,
    "1280x720": 0, "1920x1080": 1,
    "720x480": 0, "1280x720": 1,
    "720x576": 0, "1024x576": 1,
    "640x360": 0, "720x480": 1,
    "480x270": 0, "720x408": 1,
    { "640x480": 1,
    } "640x360": 1,
    { "480x320": 0,
    } "320x240": 0
    }
    }
}

{
    "Requested": "AvailableStreamingResolutionSettings",
    "Stream": 0,
    "AvailableResolution": {
    }
}

3.1.6. Available streaming framerate settings

Get available streaming framerate settings.

Settable values are depend on the recording resolution setting on the camcorder.

Request Key Style
Value

Request

Command

Siring

AvailableStreamingFramerateSettings

✓

SessionID

Siting

(Session ID in cookie.)

✓

Params

Stream

Integer

0: First, 1: Second

✓

Resolution

Siring

"9840x2160" (PZ400/510: First stream only)

✓

"1920x1080" (PZ400/200/510: First stream only)

✓

"1280x720" (PZ400/200/510: First stream only)

✓

"1024x576" (PZ400/200/510: First stream only)

✓

"720x480"

✓

"720x576"

✓

"720x408"

✓

"640x480"

✓

"640x360"

✓

"480x320"

✓

"320x240"

✓

"1090x1080"

✓

"606x1080"

✓

"720x720"

✓

"404x720"

✓

Example

"Request":{

"Command":"AvailableStreamingFrameratoSettings".

"SessionID":"7425fbcc58ee4d15ddNo1f5ece4299a3"

"Params":{

"Resolution":"1920x1080"

}

Example(In case of PZ400/200/510)

"Request": {

"Command": "AvailableStreamingFrameratoSettings",

"SessionID": "7425fcb58ee4d150d4c1f5ace4299a3"

"Params": {

"Stream": 0.

"Resolution": "1920x1080"

Response Key Style
Value

Response

Requested

String

AvailableStreamingFramerateSettings

√

Result

String

(Result of command processing.)

√

Data

Stream

Integer

0: First, 1: Second

√

Resolution

String

"3840x2160" (PZ400/510: First stream only)

√

"1920x1080" (PZ400/200/510: First stream only)

√

"1280x720" (PZ400/200/510: First stream only)

√

"1024x576" (PZ400/200/510: First stream only)

√

"720x480"

√

"720x576"

√

"720x408"

√

"640x480"

√

"640x360"

√

"480x320"

√

"320x240"

√

"1080x1080"

√

"606x1080"

√

"720x720"

√

"404x720"

√

AvailableFramerate

60p

Integer

0: unselectable, 1: selectable

√

60i

Integer

0: unselectable, 1: selectable

√

30p

Integer

0: unselectable, 1: selectable

√

50p

Integer

0: unselectable, 1: selectable

√

50i

Integer

0: unselectable, 1: selectable

√

25p

Integer

0: unselectable, 1: selectable

√

422 10bit 60p

Integer

0: unselectable, 1: selectable

√

422 10bit 50p

Integer

0: unselectable, 1: selectable

√

max_25

Integer

0: unselectable, 1: selectable

√

max_30

Integer

0: unselectable, 1: selectable

√

max_50

Integer

0: unselectable, 1: selectable

√

max_60

Integer

0: unselectable, 1: selectable

√

* Framerate *422_10bit_60p* and "422_10bit_50p" are effective only if optional adaptor *KA-EN200* is attached on 'GY-HC900' and 'GY-HC5x0'.

Example Example(In case of PZ400/200/510)

{
    "Response": { "Response": {
    "Requested": "AvailableStreamingFramorateSettings",
    "Result": "Success", "Result": "Success",
    "Data": { "Data": {
    "Resolution": "1920x1080", "Stream": 0,
    "AvailableFramerate": { "Resolution": "1920x1080",
    "60p": 1, "AvailableFramerate": {
    "60": 0, "max_25": 0,
    "30p": 0, "max_30": 0,
    "50p": 0, "max_50": 0,
    "50": 0, "max_60": 1
    "25p": 0, }
    "422_10bit_60p": 0, }
    "422_10bit_50p": 0 }
    }
    }
}

"Requested": "AvailableStreamingFramerateSettings",

3.1.7. Available streaming bitrate settings

Get available streaming bitrate settings

Request Key Style

Type

Value

H4650

H4700

H 4700

H4700

H4701

H4700

H4800

H4700

Request

Command

String

AvailableStreamingBitrateSettings✓✓✓✓✓✓✓✓✓✓✓✓✓✓✓

SessionID

String

(Session ID in cookie.)

✓

√

✓

Params

✓

Stream

Integer

0: First, 1: Second

✓

Type

String

"UDP"/"UDPN"(PCR Jitter is -rmal)/"UDPL"(PCR Jitter is Low)/"TCP"/"RTSP"/"ZIXM"(Zxi Medium/Minimum/High Latency)/"ZIXIL"(Zxi Low Latency)/"ZIXI"/"RTMP"/"RTMPS"/"RTP"/"Facebook"/"YouTube"/"SRT"

✓

√

✓

>200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000.000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 19920x1980"(PZ400/200/510: First stream only) -1920x1980"(PZ400/200/510: First stream only)-1280x720"(PZ400/200/510: First stream only)-1024x576"(PZ400/200/510: First stream only)-720x480"-720x576"-720x480"-640x360"-480x320"-320x240"-1080x1080"-606x1080"-720x720"-404x720"60p" "50p" "60p" "50p" "30p" "25p"Character string for Framerate value "1" - "60"

-422_10b1_60p" "422_10bit_50p"Character string for Framerate value "1" - "60"

* Framerate "422_10bit_60p" and "422_10bit_50p" are effective only if optional adaptor "KA-EN200" is attached on 'GY-HC900' and 'GY-HC5x0'.
* Character string for Framerate value for PZ400/200/510: If the Video setting is 59.94/29.27, then 60-59.94 and 30-29.97.

Example Example(In case of PZ400/200/510)

"Request": { "Request": {

"Command": "AvailableStreamingFiltrateSettings", "SessionID": "7425fbb58ee4d15dd4c1f5ace4299a3", "Params": { "Params": {

"Type": TCP", "Stream": 0, "Resolution": "1920x1080", "Framerate": "600", "Resolution": "1920x1080", "Framerate": "30"

} "Framerate": "30"

}

"Command": "AvailableStreamingBitrateSettings", "SessionID": "7425bcb68ee4d15dd4c1f5ace4299a3",
"Type": "RTSP",

Response Key Style
Value

Response

Requested

String

AvailableStreamingBitrateSettings / √ √ √ √ √ √ √ √ √ √ √

Result

String

(Result of command processing.) √ √ √ √ √ √ √ √ √ √ √

Data

Stream

Integer

0: First, 1: Second

√

Type

String

"UDP" /

√

"UDPN" (PCR Jitter is -rmal) /

√

"UDPL" (PCR Jitter is Low) /

√

"TCP" /

√

"RTSP" /

√

"ZIXIM" (Zxi Medium/Minimum/High Latency) /

√

"ZIXIL" (Zxi Low Latency) /

√

"ZIXI" /

√

"RTMP"

√

"RTMPS" /

√

"RTP" /

√

"Facebook" /

√

"You tube" /

√

"SRT"

√

Resolution

String

"3840x2160" (PZ400/510: First stream only)

√

"1920x1080" (PZ400/200/510: First stream only)

√

"1280x720" (PZ400/200/510: First stream only)

√

"1024x576" (PZ400/200/510: First stream only)

√

"720x480"

√

"720x576"

√

"720x408"

√

"640x480"

√

"640x360"

√

"480x320"

√

"320x240"

√

"1080x1080"

√

"606x1080"

√

"720x720"

√

"404x720"

√

Framerate

String

"60p" / "50p" / "60l" / "50l" / "30p" / "25p" /

√

"422 10bit 60p" / "422 10bit 50p"

√

Character string for Framerate value "1" - "60"

√

AvailableBitrate

0.2M

integer

0 : unselectable , 1 : selectable √ - - - - - - - - - - - - -

0.3M

integer

0 : unselectable , 1 : selectable √ √ √ √ √ √ √ √ √ - - -

0.8M

integer

0 : unselectable , 1 : selectable √ √ √ √ √ √ √ √ √ - - -

1.5M

integer

0 : unselectable , 1 : selectable √ √ √ √ √ √ √ √ √ - - -

2.5M

integer

0 : unselectable , 1 : selectable - - - - - - - - - - - - - -

3.0M

integer

0 : unselectable , 1 : selectable √ √ √ √ √ √ √ √ - - -

5.0M

integer

0 : unselectable , 1 : selectable √ √ √ √ √ √ √ √ √ - - -

8.0M

integer

0 : unselectable , 1 : selectable √ √ √ √ √ √ √ √ √ - - -

10M

integer

0 : unselectable , 1 : selectable - - - - - - - - - - - -

12M

integer

0 : unselectable , 1 : selectable √ √ √ √ √ √ √ √ - - -

16M

integer

0 : unselectable , 1 : selectable

- - - - - - - - - - √ √ √ - - -

20M

integer

0 : unselectable , 1 : selectable

- - - - - - - - - - √ √ √ - - -

24M

integer

0 : unselectable , 1 : selectable

- - - - - - - - - - - √ √ - - -

32K-61440K

integer

0 : unselectable , 1 : selectable * For the second stream, read as 32K 20480K.

- - - - - - - - - - - √ √ √

* Framerate *422 10bit 60p* and "422 10bit 50p" are effective only if optional adaptor "KA-EN200" is attached on 'GY-HC900' and 'GY-HC5x0'.
* Character string for Framerate value for PZ400/200/510 : If the Video setting is 59.94/29.27, then 60=59.94 and 30=29.97.

Example Example(In case of PZ400/200/510)

{
    "Response": { "Response": {
    "Requested": "AvailableStreamingBitrateSettings",
    "Result": "Success", "Result": "Success",
    "Data": { "Data": {
    "Type": "TCP", "Stream": 0,
    "Resolution": "1920x1080", "Typo": "RTSP",
    "Framerate": "80p", "Resolution": "1920x1080",
    "AvailableBitrate": { "Framerate": "30",
    "0.2M": 0, "AvailableBitrate": {
    "0.3M": 0, "32K-61440K": 1
    "0.6M": 0, }
    "1.5M": 0, }
    "2.5M": 0, }
    "3.0M": 1, }
    "5.0M": 1,
    "8.0M": 1,
    "10M": 0,
    "12M": 1,
    "16M": 1,
    "20M": 1,
    "24M": 1
    }
    }
}

"Requested": "AvailableStreamingBikrateSettings",

3.1.8. Get current streaming server number

Get current streaming server ID.

There are four settings of streaming server.

Request Key Size Value
Command	String	GetCurrentStreamingServerID √ √ √ √ √ √ √ √ √ - - -
SessionID	String	(Session ID in cookie.)

Example

"Request":

"Command": "GetCurrentStreamingServerID",

"SessionID": "7425f0c658ee4d15dd4c1f5ace4298a3"

Response Key Style Value

Response

Requested

Siting

GetCurrentStreamingServerID √ √ √ √ √ √ √ √ √ - - -

Result

Siting

(Result of command processing.) √ √ √ √ √ √ √ √ √ √ - - -

Data

Integer

0:server1, 1: server2, 2: server3, 3: server4

√

✗

√

□

○

Example

'Response': {

"Requested": "GetCurrentStreamingServerID",

'Result': 'Success',

'Data': {

"ID': 3

}

3.1.9. Set current streaming server number

Set current streaming server ID.

Choose the server ID to use in streaming.

Request Key Style
Value

Request

Command

Siting

SetCurrentStreamingServerID √ √ √ √ √ √ √ √ √ - - -

SessionID

Siting

(Session ID in cookie.)

√

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

√

Example

"Request": {

"Command": "SetCurrentStreamingServerID",

"SessionID": "7425fbb586e4d150d4c1f5ace4299a3",

"Params": {

"ID": 3

}

Response Key Style
Value

Response

Requested

Siting

SetCurrentStreamingServerID

√

Result

Siting

(Result of command processing.)

√

Example

{

"Response": {

"Requested": "SetCurrentStreamingServerID".

"Result": "Success"

}

3.1.10. Get streaming server settings

Get streaming settings for each server ID.

Request Key Style
Value

Request

Command

Siring

GetStreamingServerSettings✓✓✓✓✓✓✓✓✓✓✓✓✓

SessionID

Siring

(Session ID in cookie.)

✓

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

✓

Type

Siring

"RTSP" / "RTSP2" / "RTMP" / "RTMP2" / "RTMPS" / "RTMPS2" / "SRT" / "Multicast" / "NDI"

✓

"RTSP" / "RTSP2" / "RTMP" / "RTMP2" / "RTMPS" / "RTMPS2" / "SRT" / "NDI" / "MPEG2 TS2" / "MPEG2 TS2"

✓

Example Example(In case of PZ400/200/510)

"Request": { "Request": { "Command": "GetStreamingServerSettings", "SessionID": "7425bcb58ee4d15db4c15aco4299a3", "Params": { "Params": { "ID": 1 } } }

{ "Command": "GetStreamingServerSettings", "SessionID": "7425bcb58ee4d15db4c15aco4299a3", "Type": "RTSP" } } }

Response
Value

Response

Requested

Sling

GetStreamingServerSettings✓✓✓✓✓✓✓✓✓✓✓✓

Result

Sling

(Result of command processing.)

✓

Data

Alias

Sling

(Another name of server)

✓

Type

Sling

"UDP"/

✓

"TCP"/

✓

"RTSP"/

✓

"RTSP2"/

✓

"ZIXI"/

✓

"RTMP"

✓

"RTMP2"

✓

"RTMPS"/

✓

"RTMPS2"/

✓

"RTP"/

✓

"Facebook"/

✓

"YouTube"/

✓

"SRT"

✓

"Multicast"

✓

"NDI"

✓

"MPEG2-TS"

✓

"MPEG2-TS2"

✓

Udp (Selected by Type)
DstAddress	String	(IP address) √ √ √ √ √ √ √ √ - - -
DstPort	Integer	(Port number) √ √ √ √ √ √ √ √ - - -
PcrJitter	Integer	0:-RMAL, 1:LOW	-	√	√	√	√	√	√	-	-	-	-	-	-	-
PcrMode	Integer	0:Standard, 1:Fast	-	-	-	-	-	-	-	-	-	√	√	-	-	-
Tcp (Selected by Type)
DstAddress	String	(IP address)	√	-	-	-	-	-	-	-	-	√	√	-	-	-
DstPort	Integer	(Port number)	√	-	-	-	-	-	-	-	-	√	√	-	-	-
Risp (Selected by Type)
DstPort	Integer	(Port number) √ √ √ √ √ √ √ √ √ √ √
StreamId	String	(Stream ID) √ √ √ √ √ √ √ √ √ √ √
Username	String	(User name)	√	√	√	√	√	√	√	√	√	√	√	-	-	-
Password	String	(Password for RTSP:RTP) √ √ √ √ √ √ √ √ √ - - -
Auth	Integer	0:OFF, 1:ON	-	-	-	-	-	-	-	-	-	-	-	√	√	√
Zixi (Selected by Type)
DstAddress	String	(IP address) √ √ √ √ √ √ √ √ √ - - -
DstPort	Integer	(Port number) √ √ √ √ √ √ √ √ √ √ - - -
StreamId	String	(Stream ID for ZIXI)	√	√	√	√	√	√	√	√	√	√	√	-	-	-
Password	String	(Password for ZIXI)	√	√	√	√	√	√	√	√	√	√	√	-	-	-
Latency	Integer	0:Low, 1:Medium, 2:Minimum(Zixi OFF), 3:High	√	√	√	√	√	√	√	√	√	√	√	-	-	-
PcrMode	Integer	0:Standard, 1:Fast	-	-	-	-	-	-	-	-	-	√	√	-	-	-
AdaptiveBitrate	Integer	0:OFF, 1:ON	√	√	√	√	√	√	√	√	√	√	√	-	-	-
Rimp		(Selected by Type)
DstUrl	String	(Network URL for Delivery)	√	√	√	√	√	√	√	√	√	√	√	√	√	√
StreamKey	String	(Key for Delivery)	√	√	√	√	√	√	√	√	√	√	√	√	√	√
Status	Integer	0:OFF, 1:ON	-	-	-	-	-	-	-	-	-	-	-	√	√	√
Video	Integer	0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-	√	√	√
Audio	Integer	0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-	√	√	√
Rimps		(Selected by Type)
DstUrl	String	(Network URL for Delivery)	-	-	-	-	√	√	-	√	√	√	√	√	√	√
StreamKey	String	(Key for Delivery)	-	-	-	-	√	√	-	√	√	√	√	√	√	√
Status	Integer	0:OFF, 1:ON	-	-	-	-	-	-	-	-	-	-	-	√	√	√
Video	Integer	0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-	√	√	-
Audio	Integer	0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-	√	√	√
Rtp (Selected by Type)
DstAddress	String	(IP address)	-	√	√	√	√	√	√	√	√	√	√	-	-	-
DstPort	Integer	(Port number)	-	√	√	√	√	√	√	√	√	√	√	-	-	-
PcrMode	Integer	0:Standard, 1:Fast	-	-	-	-	-	-	-	-	-	√	√	-	-	-
Simple2022Foc	Integer	0:OFF, 1:ON	-	√	√	√	√	√	√	√	√	√	√	-	-	-
FecMatrixL	Integer	4 - 20	-	√	√	√	√	√	√	√	√	√	√	-	-	-
FecMatrixD	Integer	4 - 20	-	√	√	√	√	√	√	√	√	√	√	-	-	-
Srt		(Selected by Type)
DstAddress	String	(IP address)	-	-	-	-	-	-	-	-	-	√	√	√	√	√
DstPort	Integer	(Port number)	-	-	-	-	-	-	-	-	-	√	√	√	√	√
StreamId	String	(Stream ID for SRT)	-	-	-	-	-	-	-	-	-	√	√	√	√	√
ConnectionMode	Integer	0: Caller, 1:Listener, 2: Rendezvous	-	-	-	-	-	-	-	-	-	√	√	√	√	√
BandwidthOverhead	Integer	5 - 100	-	-	-	-	-	-	-	-	-	√	√	√	√	√
Latency	Integer	20 - 8000	-	-	-	-	-	-	-	-	-	√	√	√	√	√
Encryption	Integer	0: Off, 1: AES-128, 2: AES-192, 3: AES-256	-	-	-	-	-	-	-	-	-	√	√	√	√	√
FEC	Integer	0: Off, 1: 10x10, 2: 8x8, 3: 6x6	-	-	-	-	-	-	-	-	-	√	√	√	√	√
AdaptiveBitrate	Integer	0:OFF, 1:ON	-	-	-	-	-	-	-	-	-	√	√	-	-	-
PcrMode	Integer	0:Standard, 1:Fast	-	-	-	-	-	-	-	-	-	√	√	-	-	-
Passphrase	String	ASCII 10-79 character	-	-	-	-	-	-	-	-	-	√	√	√	√	√
Status	Integer	0:OFF, 1:ON	-	-	-	-	-	-	-	-	-	-	-	√	√	√

Multicast (Selected by Type)

Status

Integer

0:OFF, 1:ON

✓

DstAddress

String

(IP address)

✓

DstPort

Integer

(Port number)

✓

Nci (Selected by Type)

DeviceName

String

(text)

✓

GroupName

String

(text)

✓

Mpeg2Ts (Selected by Type "MPEG2-TS" and "MPEG2-TS2")

Type

Integer

0: UDP, 1: RTP 'A setting for either MPEG-TS or MPEG-TS2 is valid for both.

✓

DstAddress

String

(IP address / Server name) *Multicast address is valid

✓

DstPort

Integer

(Port number) -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - √

Status

Integer

0:OFF, 1:ON -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

Example Example(In case of PZ400/200/510)

{
    "Response": { "Response": {
    "Requested": "GetStreamingServerSettings",
    "Result": "Success",
    "Data": {
    "Alias": "Server1",
    "Type": "TCP",
    "Tcp": {
    "DstAddress": "192.168.0.1",
    "DstPort": 6504
    }
    }
}

{
    "Requested": "GetStreamingServerSettings",
    "Result": "Success",
    "Data": {
    "Type": "RTSP",
    "Rtsp": {
    "DstPort": 554,
    "StreamId": "",
    "Auth": 1
    }
    }
}

3.1.11. Set streaming server settings(UDP)

Set streaming settings for each server ID.

Request Key Style

Systc

Value

H4650

H4660

H 4700

H4660

Request

Command

Sling

SetStreamingServerSettingsUDP √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∩ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∥ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∎ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∵ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∧ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∟ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∼ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∿ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∑ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∂ (√) (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∏) (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ ( ) (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∐) (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (\ ) (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ ()) (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∸) (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ \textsuperscript* { ~ } ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ (~) (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑ (∑

Example

"Request":{

"Command": "SetStreamingServerSettingsUDP",

"SessionID": "7425bcb58ee4d15dd4c1f5ace4299a3",

"Params":{

"ID": 1,

"Alias": "Servor1",

"DstAddress": "192.168.0.1",

"DstPort": 6504,

"PorJitter": 1

}

Response Key Style

By Style

Value

H4M50

H4M60

H4M80

H4M20

H4M25x

H4M80

H4M30

C5X70

P7100

H4M90

H4M50

H4M40

P7200

P2510

Response

Requested

Sling

SetStreamingServerSettingsUDP √ √ √ √ √ √ √ √ √ √ - - -

Result

Sling

{Result of command processing.} √ √ √ √ √ √ √ √ √ - - -

Example

"Response": {"Requested": "SetStreamingServerSettingsUDP", "Result": "Success"}

3.1.12. Set streaming server settings(TCP)

Set streaming settings for each server ID.

Type 'TCP' is effective in 'GY-HM650', 'GY-HC5x0', and 'GY-HC900'.

Request Key Style
Value

Request

Command

Siring

SetStreamingServerSettingsTCP

√

SessionID

Siring

(Session ID in cookie.)

√

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

√

Alias

Siring

(Another name of server)

√

DatAddress

Siring

(IP address)

√

DstPort

Integer

(Port number)

√

Example

"Request": {

"Command": "SetStreamingServerSettings1CP", "SessionID": "7425fbcb58ee4d15dd4c15aco4299a3", "Params": {

"ID": 1,

"Alias": "Server1", "DatAddress": "192.168.0.1", "DatPont": 6504}

Response Key Style
Value

Response

Requested

String

SetStreamingServerSettingsTCP

√

Result

String

(Result of command processing.)

√

Example

{

"Response": {

"Requested": "SetStreamingServerSettingsTCP", "Result": "Success"

}

3.1.13. Set streaming server settings(RTSP/RTP)

Set streaming settings for each server ID.

Request Key Style
Value

Request

Command

String

Set:StreamingServerSettingsRTSP✓✓✓✓✓✓✓✓✓✓✓✓✓✓

SessionID

String

(Session ID in cookie.)

✓

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

✓

Alias

String

(Another name of server)✓✓✓✓✓✓✓✓✓✓---

Username

String

(Username for RTSP/RTP)

✓

Password

String

(Password for RTSP/RTP)✓✓✓✓✓✓✓✓✓✓---

DstPort

Integer

(Port number)

✓

Auth

Integer

0:OFF, 1:ON

✓

Example Example(In case of PZ400/200/510)

"Request": {Command": "SetStreamingServerSettingsRTSP", "SessionID": "7425fcbc58ee4d15dd4c15ace4299a3", "Params": {"ID": 1, "Alias": "Server1", "Username": "user", "Password": "abcde"} }

"Request": {Command": "SetStreamingServerSettingsRTSP", "SessionID": "7425fcbc58ee4d15dd4c15ace4299a3", "Params": {"DstPort": 554, "Auth": {}} } }

Response Key Style
Value

Response

Requested

String

Set:StreamingServerSettingsRTSP √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∵ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∎ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∥ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∩ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∿ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∧ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∑ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∟ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ ∞ √ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ √ √ √ ∞ ∞ √ √ √ √ √ ∞ ∞ √ √ √ √ √ ∞ ∞ √ √ √ √ √ ∞ ∞ √ √ √ √ √ ∞ ∞ √ √ √ √ √ ∞ ∞ √ √ √ √ √ ∞ ∞ √ √ √ √ √ ∞ ∞ √ ∞

Result

String

(Result of command processing.)

√

Example

'Response' : { "Requested" : "SetStreamingServerSettingsATSP", "Result" : "Success"}

3.1.14. Set streaming server settings(ZIXI)

Set streaming settings for each server ID.

Request Key Style
Value

Request

Command

String

SetStreamingServerSettingsZIXI

√

SessionID

String

(Session ID in cookie.)

√

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

√

Alias

String

(Another name of server) √ √ √ √ √ √ √ √ √ - - -

DstAddress

String

(IP address) √ √ √ √ √ √ √ √ √ - - -

DstPort

Integer

(Port number) √ √ √ √ √ √ √ √ √ - - -

StreamId

String

(Stream ID for ZIXI) √ √ √ √ √ √ √ √ √ - - -

Password

String

(Password for ZIXI)

√

Latency

Integer

0:Low, 1:Medium, 2:Minimum(Zixi OFF), 3:High

√

PcrMode

Integer

0:Standard, 1:Fast

√

AdaptiveBitrate

Integer

0:OFF, 1:ON √ √ √ √ √ √ √ √ - - -

High Latency of Type is effective in 'GY-HM660', 'GY-HM200', 'GY-HM25x', 'GY-HM280', 'GY-LS300', 'GY-HM8x0', and 'KY-PZ100'.

Example

"Request": {

"Command": "SetStreamingServerSettingsZ1X1",

"SessionID": "7425fcbc58ee4d15dd4c1f5acc4299a3",

"Params": {

"ID": 1,

"Alias": "Server1",

"DstAddress": "192.168.0.1",

"DstPort": 2088,

"StreamId": "NM650-1234",

"Password": "abode",

"Latency": 1,

"AdaptiveBitrate": 0

}

Response Key Style
Value

Response

Requested

Sitting

SatStreamingServerSettingsZIXI

✓

Result

Sitting

(Result of command processing.)

✓

Example

{

"Response": {

"Requested": "SetStreamingServerSettingsZIXI".

"Result": "Success"

}

3.1.15. Set streaming server settings(RTMP)

Set streaming settings for each server ID.

Request Key Style
Value

Request

Command

Siring

SetStreamingServerSettingsRTMP √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∵ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∎ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∩ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∥ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∿ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∧ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∟ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∂ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∤ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∝ \{√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√}

Example Example(In case of PZ400/200/510)

"Request": {
"Command": "SetStreamingServerSettingsRTMF",
"SessionID": "74250bcb58e04d150b4c16a0c4299a3",
"Params": {
"ID": 1,
"Alias": "Server1",
"DatUrl": "http://xxx.xxxx.xxxx-xxx.com/play",
"StreamKey": "livestreaming"
}
}

"Request": {
"Command": "SetStreamingServerSettingsRTMF",
"SessionID": "7425tbc658ce4d15d4c15aco4299a3",
"Params": {
"Stream": 0,
"DstUrl": "http://xxxx.xxxx.xxxx-xxx.com/live",
"StreamKey": "stream0",
"Status": 1,
"Video": 0,
"Apolio": 0
}
}

Response
Value

Response

Requested

Siting

SetStreamingServerSettingsRTMP √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∂ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∎ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∵ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∩ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∥ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ ∞ √ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ √ √ √ √ ∞ √ ∞ √ √ √ √ ∞ √ ∞ √ √ √ √ ∞ √ ∞ √ √ √ √ ∞ √ ∞ √ √ √ √ ∞ √ ∞ √ √ √ √ ∞ √ ∞ ∞ √ √ √ √ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∝ \{√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√,√}

Example

"Response": {
"Requested": "SetStreamingServerSettingsRTMP",
"Result": "Success"

3.1.16. Set streaming server settings(RTMPS)

Set streaming settings for each server ID.

Request Key Style
Value

Request

Command

Siring

SetStreamingServerSettingsRTMPS

✓

SessionID

Siring

(Session ID in cookie.)

✓

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

✓

Alias

Siring

(Another name of server)

✓

Stream

Integer

0: First, 1: Second

✓

DstUrl

Siring

(Network URL for Delivery)

✓

StreamKey

Siring

(Key for Delivery)

✓

Status

Integer

0:OFF, 1:ON (Other settings are valid when this is ON.)

✓

Video

Integer

0:Disable, 1:Enable

✓

Audio

Integer

0:Disable, 1:Enable

✓

Example Example(In case of PZ400/200/510)

{"Request": { "Command": "SetStreamingServerSettingsRTMPS", "SessionID": "7425fbb68ee4d15dd4c15ace4299a3", "Params": { "ID": 1, "Alias": "Server1", "DstUI": "nmps/xxxxxxxxxxxxxx.com/play", "StreamKey": "livestreaming" }} }

Response
Value

Response

Requested

String

SetStreamingServerSettingsRTMPS

✓

Result

string

(Result of command processing.)

✓

Example

"Response": {"Requested": "SetStreamingServerSettingsRTMPS", "Result": "Success"}

3.1.17. Set streaming server settings(RTP)

Set streaming settings for each server ID.

Request Key Style
Value

Request

Command

Siting

SetStreamingServerSettingsRTP

✓

SessionID

Siting

(Session ID in cookie.)

✓

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

✓

Alias

String

(Another name of server)

✓

DstAddress

Siting

(IP address)

✓

DstPort

Integer

(Port number)

✓

PortMode

Integer

0:Standard, 1:Fast

✓

Smpte2022Fec

Integer

0:OFF, 1:ON

✓

FecMatrixL

Integer

4 - 20

✓

FecMatrixD

Integer

4 - 20

✓

* FecMatorixL and FecMatrixD value are satisfy A×B=100 condition.

Example

"Request": {

"Command": "SetStreamingServerSettingsRTP",

"SessionID": "7425ibcb58ee4d15dd4c1f5ace4299e3",

"Params": {

"ID": 1,

"Alias": "Server1",

"DstAddress": "192.168.0.1",

"DstPort": 2088,

"Simple2022Fac": 1,

"FecMatrixL": 10,

"FecMatrixD": 10

}

Response Key Style
Value

Response

Requested

String

SetStreamingServerSettingsRTP

✓

Result

String

(Result of command processing.)

✓

Example

"Response": { "Requested": "SetStreamingServerSettingsRTP", "Result": "Success" }

3.1.18. Set streaming server settings(SRT)

Set streaming settings for each server ID.

Request Key Style
Value

Request
Command		String	SetStreamingServerSettingsSRT	-	-	-	-	-	-	-	-	√	√	√	√
SessionID		String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	-	√	√	√
Params
	ID	integer	0:server1, 1: server2, 2: server3, 3: server4	-	-	-	-	-	-	-	-	√	√	-	-
	Alias	string	(Another name of server)	-	-	-	-	-	-	-	-	√	√	-	-
	DstAddress	string	(IP Address)	-	-	-	-	-	-	-	-	-	√	√	√
	DstPort	integer	1 - 65535	-	-	-	-	-	-	-	-	√	√	√	√
	StreamId	string	(Stream ID for SRT)	-	-	-	-	-	-	-	-	√	√	√	√
	ConnectionMode	integer	0: Caller 1: Listener, 2: Rendezvous	-	-	-	-	-	-	-	-	-	√	√	√
	BandwidthOverhead	integer	5 - 100	-	-	-	-	-	-	-	-	√	√	√	√
	Latency	integer	20 - 8000	-	-	-	-	-	-	-	-	√	√	√	√
	Encryption	integer	0: OFF, 1: AES-128, 2: AES-192 3: AES-256	-	-	-	-	-	-	-	-	√	√	√	√
	FEC	integer	0: OFF, 1: 10x10, 2: 8x8 3: 6x6	-	-	-	-	-	-	-	-	√	√	√	√
	AdaptiveBitrate	integer	0:OFF, 1:ON	-	-	-	-	-	-	-	-	√	√	-	-
	PcrMode	integer	0:Standard, 1:Fast	-	-	-	-	-	-	-	-	√	√	-	-
	Passphrase	string	ASCII 10-79 character	-	-	-	-	-	-	-	-	√	√	√	√
	Status	integer	0:OFF, 1:ON (Other settings are valid when this is ON.The second stream is not supported, it works as OFF regardless of the setting.)	-	-	-	-	-	-	-	-	-	√	√	√

Example

"Request":{

"Command": "SetStreamingServerSettingsSRT",

"SessionID": "7425fbbc58ee4d1504c15a0e4299a3",

"Params":{

"ID": 0,

"Alias": "Server1",

"DstAddress": "192.168.0.1",

"DstPort": 6504

"ConnectionMode": 0

"BandwidthOverhead": 10

"Latency": 20

"Encryption": 0

"Passphrase": "abcdefghijklmnopqrstuvwxyz",

}

Example(In case of PZ400/200/510)

"Request":{

"Command": "SetStreamingServerSettingsSRT", "SessionID": "7425fbbc58ee4d15ddfc16ace4299a3", "Params":}

"DstAddress": "192.0.2.1", "DstPort": 4578, "StreamId": "P2510-AABBCCDD", "ConnectionMode": 1, "BandwidthOverhead": 25, "Latency": 500, "Encryption": 0, "FEC": 0, "Passphrase": "1234567890", "Status": 1}

Response Key Style
Value

Response

Requested

String

SetStreamingServerSettingsSRT

√

Result

String

(Result of command processing.)

√

Example

"Response": { "Requested": "SetStreamingServerSettingsSRT", "Result": "Success"}

3.1.19. Set Streaming Encode Protocol

Set Streaming Encode Protocol

This setting will not take effect until reboot.

Request Key Style
Value

Request

Command

String

SetStreamingEncodeProtocol

√

SessionID

String

{Session ID in cookie.}

√

Params

Stream

Integer

0: First, 1: Second

√

EncodeProtocol

String

"H264" / "H265" / "MJPEG"

√

Example

"Request":{

"Command": "SetStreamingEncodeProtocol",

"SessionID": "7425fcbc58ee4d15dd4c15ace4299a3",

"Params":{

"Stream": 0.

"EncodeProtocol": "H264"

}

Response Key Style
Value

Response

Requested

String

Set:StreamingEncodeProtocol

Result

String

(Result of command processing.)

Example

"Response":{ "Requested": "SetStreamingEncodeProtocol", "Result": "Success" }

3.1.20. Set Streaming | Key Frame Interval

Set Streaming | Key Frame Interval

This setting will not take effect until reboot.

Request Key Style
Value

Request

Command

String

SetStreaming|KeyFrameInterval

√

SessionID

String

(Session ID in cookie.)

√

Params

Stream

Integer

0: First. 1: Second

√

Interval

Integer

Value of 1 Key Frame Interval 2 - 60

√

Example

"Request":{

"Command": "SetStreaminglKeyFrameInterval".

"SessionID": "7425fcbc58ee4d150d4c1f5ace4299a3".

"Params":{

"Stream": 0.

"Interval": 30

}

Response Key Style
Value

Response

Requested

String

SetStreaming|KeyFrameInterval

Result

String

(Result of command processing.)

Example

"Response":{ "Requested": "SetStreaming/KeyFrameInterval", "Result": "Success" }

3.1.21. Get Video Settings

Get the Video settings

Request Key Style
Value

Request

Command

String

GetVideoSettings

√

SessionID

String

(Session ID in cookie.)

√

Example

"Request": {

"Command": "GetVideoSettings",

"SessionID": "7425fccb56ee4d15dd4c1f5ace4299a3"

}

Response Key Style
Value

Response

Requested

String

GetVideoSettings

✓

Result

String

(Result of command processing.)

✓

Data

Output

String

"SDI" / "HDMI"

✓

VideoFormat

String

"50Hz" / "60Hz" / "DialPriority"

✓

"3840x2160/60p" / "3640x2160/59.94p" / "3840x2160/50p" / "3840x2160/30p" / "3840x2160/29.97p" / "3840x2160/25p" / "1920x1080/60p" / "1920x1080/59.94p" / "1920x1080/50p" / "1920x1080/30p" / "1920x1080/29.97p" / "1920x1080/25p" / "1280x720/60p" / "1280x720/59.94p" / "1280x720/50p" *3840x2160 is available only for HDMI

VideoEncodeLevel

String

"mainprofile" / "highprofile"

✓

Example

"Response": {

"Requested": "GetVideoSettings",

"Result": "Success",

"Data": {

"Output": "HDMI",

"VideoFormat": "DialPriority",

"EncodeLevel": "mainprofile"

}

3.1.22. Set Video HDMI/SDI Output

Set Video HDMI/SDI Output.

This setting will not take effect until reboot.

Request Key Style

Size

Value

H0850

H0860

H0863

H0870

H0875

H0880

H0883

H0890

H0893

H0896

H0899

H0900

H0903

H0906

H0910

H0913

H0916

H0920

H0923

H0926

H0930

Request

Command

Sling

SetVideoHdmiSdiOutput

√

SessionID

Sling

(Session ID in cookie.)

√

Params

Output

Sling

"SDI" / "HDMI"

√

Example

"Request": {

"Command": "ServiceHomeSaiOutput",

"SessionID": "7425fcb58cc4d15dd4c15acc4299a3",

"Params": {

"Output": "HOM"

}

Response Key Style

Key Style: Value

Response

Requested

String

SetVideoHdmiSdiOutput

√

Result

String

(Result of command processing.)

√

Example

"Response": { "Requested": "SetVideoIdimiSollOutput", "Result": "Success" }

3.1.23. Set Video Format

Set Video Format.

This setting will not take effect until reboot.

Request Key Style
Value

Request

Command

Siting

SetVideoFormat

√

SessionID

Siting

(Session ID in cookie.)

√

Params

VideoFormat

Siting

"50Hz" / "60Hz" / "DialPriority"

√

"3840x2160/60p" / "3840x2160/59.94p" / "3840x2160/50p" / "3840x2160/30p" / "3840x2160/29.97p" / "3840x2160/25p" / "1920x1080/60p" / "1920x1080/59.94p" / "1920x1080/50p" / "1920x1080/50p" / "1920x1080/30p" / "1920x1080/29.97p" / "1920x1080/25p" / "1280x720/60p" / "1280x720/59.94p" / "1280x720/50p" "3840x2160 is available only for HDMI

Example

"Request": {"Command": "SetVideoFormat","SessionID": "7425fbb58ee4d15dd4c1f5ace4299e3","Params": {"VideoFormat": "DialPriority"}}

Response Key Style
Value

Response

Requested

String

SetVideoFormat

✓

Result

String

(Result of command processing.)

✓

Example

{

"Response": {

"Requested": "SetVideoFormat",

"Result": "Success"

}

3.1.24. Set Video Encode Level

Set Video Encode Level.

This setting will not take effect until reboot.

Request Key Style

S yte

Value

H08590

H08680

H086C2

H08200

H08250

H08280

L5300

PZ1700

H08000

H08240

PZ2200

PZ2510

Request

Command

Sling

SetVideoEncodeLevel

√

SessionID

Sling

(Session ID in cookie.)

√

Params

EncodeLevel

Sling

"mainprofile" ; "highprofile"

√

Example

"Request": {

"Command": "ServioEncodeLevel",

"SessionID": "7425fcb58cc4d15dd4c15acc4299a3",

"Params": {

"EncodeLevel": "mainprofile"

}

Response Key Style

Key Style: Value

Response

Requested

String

SetVideoEncodeLevel

√

Result

String

(Result of command processing.)

√

Example

"Response": { "Requested": "SetVideoEncodeLevel", "Result": "Success" }

3.1.26. Set Network Multicast Settings

Set the Network Multicast Settings.

This setting will not take effect until reboot.

Request Key Style
Value

Request

Command

Siting

SetNetworkMulticastSettings

SessionID

Siting

(Session ID in cookie.)

Params

Status

Integer

0:OFF, 1:ON {Other settings are valid when this is ON.}

DstAddress

Siting

(IP address)

DstPort

Integer

(Port number)

Example

"Request":{

"Command": "SetNetworkMulticastSettings",

"SessionID": "7425f0cb586ee4d15cd4c1f5ace4299a3",

"Params":{

"Status": 1,

"DstAddress": "224.1.2.3",

"DstPort": 6688

}

Response Key Style
Value

Response

Requested

String

SetNetworkMulticastSettings

Result

String

(Result of command processing.)

Example

"Response": { "Requested": "SetNetworkMaticasSettings"; "Result": "Success"}

3.1.27. Set NDI Settings

Set the NDI Settings.

This setting will not take effect until reboot.

KY-PZ200 does not support NDI streaming and this command is supported only by KY-PZ200N.

Request Key Style

Type

Value

Request

Command

String

SetNDISettings

SessionID

String

(Session ID in cookie.)

Params

DeviceName

String

(text)

GroupName

String

(text)

Example

"Request":{

"Command": "SetNDISettings",

"SessionID": "7425fbcbSitee4d15004c1f5ace4299a3",

"Params":{

"DeviceName": "HD Camera",

"GroupName": "public"

}

Response Key Style

Key Style

Value

HH650

HH660

HH6u0

HH200

HH250

HH290

LS300

PZ100

HC000

HC500

PZ400

PZ900

PZ510

Response

Requested

String

SetNDISettings

√

Result

String

(Result of command processing.)

√

Example

"Response": {"Requested": "SetNDISettings", "Result": "Success"}

3.1.28. Set MPEG2-TS Settings

Set the MPEG2-TS Settings.

This setting will not take effect until reboot.

Request Key Style

S.No

Value

H0850

H0860

H0850

H0200

H0250

H0280

L5300

P7130

H0800

H0540

P4230

P2230

P2510

Request

Command

String

SetStreamingServerSettingsMPEG2TS

√

SessionID

String

(Session ID in cookie.)

Params

Stream

Integer

0: First, 1: Second

√

Type

Integer

0: UDP, 1: RTP (A setting for either MPEG-TS or MPEG-TS2 is valid for both.)

√

DstAddress

string

(IP Address / Server name)

√

DstPort

Integer

(Port number)

√

Status

Integer

0:OFF, 1:ON (Other settings are valid when this is ON.)

√

Example

"Request"/{

"Command":"SetStreamingServerSettingsMPEG2TS",

"SessionID": "74251bcb58cc4d150x4c1f5acc4299x3",

"Params" {

"Stream":0,

"Type":0,

"DstAddress":"192.168.0.1",

"DstPont":6688,

"Status":1

}

Response Key Style

cy Style

Value

H4653

H4652

H4650

H4620

H4628

L5310

P7/100

H4902

H4540

P7/400

P7/900

P7510

Response

Requested

String

SetStreamingServerSettingsMPEG2TS

√

Result

String

(Result of command processing.)

√

Example

"Response": { "Requested": "SetStreamingServerSettingsMPEG2TS", "Result": "Success"}

3.2. System Command

Zixi and SRT streaming modes are mutually exclusive on GY-HC5x0 and GY-HC900.

Only "Zixi" or "Srt" parameter is effective according to the streaming mode.

Current mode can be checked using GetSystemInfo response.

3.2.1. Get System Information

System information acquisition

Request Key Style Value

H4850

H4860

H4Bb.0

H4200

H425x

H4260

L5300

PZ100

HCS90

HCS240

PZ400

PZ200

PZ510

Command

String

GetSystemInfo √ √ √ √ √ √ √ √ √ √ √

SessionID

String

(Session ID in cookie.)

√

Response Key Style Value

Requested	Sling	GetSystemInfo √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∎ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∅ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∥ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∕ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∑ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∿ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∧ √ (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√), (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (√) (\text {X X , Y Y Y , Z Z Z } \text {X X , Y Y Y , Z Z Z } \text {X X , Y Y Y , Z Z Z } \text {X X , Y Y Y , Z Z Z} \text {X X , Y Y Y , Z Z Z} \text {X X , Y Y Y , Z Z Z} \text {X X , Y Y Y , Z Z Z} \text {X X , Y Y Y , Z Z Z} \text {X X , Y Y Y , Z Z Z} \text {X X , Y Y Y , Z Z Z} \text {X X , Y Y Y , Z Z Z} \end{array}\]

"xxxxxxxxx"

Resolution

String

Resolution of recording format.*1920x1080" / "1440x1080" / "1280x720" / "720x480" / "720x576" / "640x360" / "480x270"

√

Overlay

String

Overlay option"On" / "Off"

√

Tagging

String

Tagging option"On" / "Off"

√

Zxi

String

Zxi option"On" / "Off"

√

Srt

String

Srt option"On" / "Off"

√

NDI

String

NDI option Information on whether the camera has an NDI function."On" / "Off"

√

KA EN200

String

KA-EN200 option adaptor setting"On" / "Off"

√

Example Example(In case of PZ400/200)

{

"Response": { "Response": {

"Requested": "GetSystemInfo",

"Result": "Success",

"Data": {

"Model": "HMS50",

"Destination": "JP",

"ApiVersion": "0.13.0",

"Serial": "123/1234",

"Tagging": "Off"

}

{

"Requested": "GetSyslominfo",

"Result": "Success",

"Data": {

"Model": "PZ400",

"Destination": "JP",

"ApiVersion": "1.14.001",

"Serial": "123A1234",

"Sn": "On"

}

3.2.2. Session renewal

Renew a session

Updating session is needed within 25 seconds as always.

This command has become obsolete and session renewal is no longer required.

Please don't use this command because it causes malfunction on Web access.

Request Key Style
Value

Request

Command

String

SessionRenewal √ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

SessionID

String

(Session ID in cookie.)

√

Params

Update

Integer

0:False(Time-out immediately) √ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1:True(Time-out extension)

Example

"Request": {

"Command": "SessionRenewal",

"SessionID": "7425f0cb68pe4d15dd4c1f5ace4299a3",

"Params": {

"Update": 1

}

Response Key Style
Value

Acquire the preset zoom position.

Request Key eye Value

Request

Command

String

GetPresetZoomPosition

✓

SessionID

String

(Session ID in cookie.)

✓

Example

"Request": {

"Command": "Get"resetZoomPosition",

"SessionID": "7425fbbc58ee4d15dd4c15gce4299a3"

}

Response Key Style

Response

Requested

Siting

GetPresetZoomPosition

✓

Result

Siting

(Result of command processing.)

✓

Data

integer

Value of Preset "0" - "499",no-setting "-1"

✓

integer

Value of Preset "0" - "499",no-setting "-1"

✓

integer

Value of Preset "0" - "499",no-setting "-1"

✓

Example

{

"Response": {

"Requested": "GetPresetZoomPosition",

"Result": "Success",

"Data": {

"A": 10, "B": 20, "C": 30

}

3.2.4. Set preset zoom position

Preset the zoom position.

Request Key Style
Value

Request

Command

Siting

SetPresetZoomPosition

√

SessionID

Siting

(Session ID in cookie.)

√

Params

Siting

"A"/"B"/"C" is Preset ID

√

Position

Integer

Value of Preset "0" - "499", delete setting is "-1"

√

Example

'Request': {

"Command": "SolProtZoomPosition",

"SessionID": "7425fcbc58ee4d150d4c15ace4299a3",

"Params": {

"ID": "A",

"Position": 360

}

Response Key Style
Value

Response

Requested

Sling

SetPresetZoomPosition

√

Result

Sling

(Result of command processing.)

√

Example

"Response":{ "Requested": "SetPresetZoomPosition", "Result": "Success" }

3.2.5. Set tally lamp priority

This command was moved to "3.7.3. Set tally lamp priority".

3.2.6. Get NTP Status

Acquire the status of NTP.

Request Key Style Value

Request

Command

String

GetNTPStatus

√

SessionID

Siting

(Session ID in cookie.)

√

Response Key Style

Value

HM850

HM860

HM220

HM225x

HM230

HM240

HM250

HM260

HM270

HM280

HM290

HM210

HM220

HM230

HM240

HM2410

HM310

HM2510

HIM850

HM860

HM870

HM880

HM890

HM810

HM820

HM830

HM840

HM850

HM860

HIM860

HM860

HIM160

HM860

HM 860

HM860

Example

"Response": { "Requested": "GetNTPStatus", "Result": "Success", "Data": { "Address": "182.168.0.100", "TcSync": "On", "Status": "Synchronized" }}

3.2.7. Set NTP Server

Set the NTP server address.

Request Key Style
Value

Request

Command

String

SetNTPServer

√

SessionID

String

{Session ID in cookie.}

√

Params

Address

String

{IP address}

√

Example

"Request":{

"Command": "SetNIPServer"

"SessionID": "7425f0cb58es4d15dd4c1f5ace4269a3",

"Params":{

"Address": "192.168.0.100"

}

Response Key Style
Value

Response

Requested

Sling

SetNTPServer

√

Result

Sling

(Result of command processing.)

√

Example

"Response": {"Requested": "SetNTPServer", "Result": "Success"}

3.2.8. Set NTP Settings

Set the NTP settings.

Request Key Style
Value

Request

Command

Siting

SetNTPSettings

√

SessionID

Siting

(Session ID in cookie.)

√

Params

TcSync

Siting

"On":"Off"

√

TimeSync

Integer

0:OFF, 1:ON (For PZ400/200, other Params is valid when this parameter is ON.)

√

TimeZone

Siting

(Time Zone) "GMT-1100" - "GMT+1300"

√

ServerAddress

Siting

(IP address)

√

TimeInterval

Integer

Value of Time interval(min)

√

MainTimeShow

Status

Integer

0:OFF, 1:ON

√

XPosition

Integer

Value of X Position. (0 - 100)

√

YPosition

Integer

Value of Y Position. (0 - 100)

√

SubTimeShow

Status

Integer

0:OFF, 1:ON

√

XPosition

Integer

Value of X Position. (0 - 100)

√

YPosition

Integer

Value of Y Position. (0 - 100)

√

Example

{

"Request": {

"Command": "SetNTPSettings",

"SessionID": "7425fbb58ee4d15ddMc1f5ace4299a3",

"Params": {

"TcSync": "On"

}

Example(In case of PZ400/200/510)

"Request": {

"Command": "SetNTPSettings",

"SessionID": "7425fbcb58eeId15db4c165ape4299a3".

"Params": {

"TimeSync": 1,

"TimeZone": "GMT+0900",

"ServerAddress": "192.168.123.123",

"Interval": 1440,

"ManTimeShow": {

"Status": 1,

"XPosition": 0,

"YPosition": 0

}

"SubTimeShow": {

"Status": 0,

"XPosition": 0,

"YPosition": 0

}

Response Key Style
Value

Response

Requested

String

SetNTPSettings

√

Result

String

(Result of command processing.)

√

Example

{

"Response": {

"Requested": "SetNTPSettings",

"Result": "Success"

}

3.2.9. Get NTP Settings

Get NTP Settings.

Request Key Style
Value

Request
Command	String	GetNTPSettings
SessionID	String	(Session ID in cookie.)

Example

{

"Request": {

"Command": "GetNTPSettings",

"SessionID": "7425fbbc58ee4d15dd4c1f5ce4299a3"

}

Response Key Style
Value

Response

Requested

String

GelNTPSettings

√

Result

String

(Result of command processing.)

√

Data

TimeSync

Integer

0:OFF, 1:ON

√

TimeZone

String

(Time Zone) "GMT-1100" - "GMT+1300"

√

ServerAddress

String

(IP address)

√

TimeInterval

Integer

Value of Time interval(min)

√

MainTimeShow

Status

Integer

0:OFF, 1:ON

√

XPosition

Integer

Value of X Position.

√

YPosition

Integer

Value of Y Position.

√

SubTimeShow

Status

Integer

0:OFF, 1:ON

√

XPosition

Integer

Value of X Position.

√

YPosition

Integer

Value of Y Position。

√

Example

{
    "Response": {
    "Requested": "GetNTPSettings",
    "Result": "Success",
    "Data": {
    "TimeSync": 1,
    "TimeZone": "GMT+0900",
    "ServerAddress": "192.168.0.100",
    "Interval": 1440,
    "MainTimeShow": {
    "Status": 1,
    "XPosition": 0,
    "YPosition": 0
    },
    "SubTimeShow": {
    "Status": "Off",
    "XPosition": 0,
    "YPosition": 0
    }
}

Send the Request to the System.

Request Key Style Value

Request

Command

Sling

SystemRequest

SessionID

Sling

(Session ID in cookie.)

Params

Request

Sling

"Reboot" / "Restore"

3.3. Camera Control Command

3.3.1. Get camera status

Request all status information of camera function.

It is recommended to use this command every 500 msec or above.

Unnecessary use of this command make performance degradation.

Request Key Style Value

Request

Command

String

GetCamStatus

✓

SessionID

String

(Session ID in cookie.)

✓

Response Key Style

Value

11/08/30

11/08/60

11/09/20

11/12/30

11/12/25

11/12/30

11/13/00

11/13/10

11/14/00

11/14/10

11/14/20

11/14/30

11/14/40

11/14/50

11/14/60

Response

Requested

String

GetCamStatus

✓

Result

String

(Result of command processing.)

✓

Data

✓

Camera (Camera)

✓

Status

String

Status"NoCard"(no card inserted) / "Stop"(recording stop) / P2400:2001 always return "NoCard"."Standby"(record standby) / "Rec"(recording)/"RecPause"(recording pause)

✓

Mode

String

Mode"Camera"(record mode) /\("Thrubnail"(display thrubnail) / "Play"(play clip) /\("Review"(review clip) / "USB"(connect USB) /\("EditMetadata"(edit metadata)

✓

RecMode

String

Rec mode"Normal" / "Pre" / "Clip" / "Frame" / "Interval" /\("Variable")

✓

String

recording time(sec)(32bit length)

✓

AspectRatio

String

Aspect ratio "16.9" / "4.3"

✓

WebAccess

String

Web access "Off" / "On"

✓

VideoOutputStatus

String

Video output status of camera, "Off" / "On"

✓

MenuStatus

String

Menu Open status of camera "Off" / "On"

✓

MenuOutput

String

"All" / "Web"

✓

FullAuto

✓

Status

String

Status "Off" / "On" / "Preset"

✓

Exposure

✓

Status

String

Exposure "Auto" / "Manual" / "IrisPriority" / "ShutterPriority" "Bright"

✓

Iris

✓

Status

String

Mode "Manual" / "Auto" / "AutoAELock"

✓

"Auto" / "Manual"

✓

Value

String

Character string for iris value

✓

Position

Integer

Iris position (0-255, for Slider button position)

✓

Gain

✓

Status

String

Mode "ManualL" / "ManualM" / "ManualH" / "Alc" or "AGC"(HC5x0) / "AlcAELock" / "Lolux" / "Variable"

✓

"Auto" / "Manual"

✓

Value

String

Character string for gain value

✓

AeLevel

✓

Status

String

Mode "AcOff" / "AcOn" / "AcOnFace"

✓

Adjust

String

AE Level adjustment "On" / "Off"

✓

Value

String

Character string for AE level value

✓

Shutter

✓

Status

String

Mode "Off" / "Manual" / "Step" / "Variable" / "Eel" / "EeiAELock"

✓

"Auto" / "Manual"

✓

Value

String

Character string for Shutter value

✓

Whb

✓

Status

String

Mode "Preset""A""B""Faw""FawAELock"

✓

"Faw""/ "Awb""/ "OnePush""/ "3200K""/ "5600K""/ "Manual"

✓

"Auto" / "Indoor""/ "Outdoor""/ "OnePush""/ "Manual"

✓

Value

String

Character string for White Balance value

✓

WhPRScale

Integer

Slide bar total length for White paint Red(0-64). (*)

✓

Slide bar total length for White paint Red(0-255). (*)

✓

WhPBScale

Integer

Slide bar total length for White paint Blue(0-64). (*)

✓

Slide bar total length for White paint Blue(0-255). (*)

✓

WhPRPosition

Integer

Slide bar current position for White paint Red(0-64). (*)

✓

Slide bar current position for White paint Red(0-255). (*)

✓

WhPBPosition

Integer

Slide bar current position for White paint Blue(0-64). (*)

✓

Slide bar current position for White paint Blue(0-255). (*)

✓

WhPRValue

String

Character string for White paint Red value

✓

WhPBValue

String

Character string for White paint Blue value

✓

Bright

✓

Value

String

Character string for Bright value

✓

Zoom

✓

Dynamic

String

Dynamic Zoom Status "On" / "Off"

✓

DynamicPos

Integer

Dynamic Zoom Position(0-499)

✓

Position

Integer

Zoom position (0-499, for Slider button position)

✓

DisplayValue

String

Character string for Zoom value "Z0 - Z149" (GY-HM200/HM25x/HM280/LS300 F-number "0 - 9999mm")

✓

PanTilt

✓

SpeedWithZoom

String

Speed With Zoom Status "On" / "Off"

✓

PresetSpeed

Integer

PanTilt/Preset speed (1-30)

✓

Focus

√

Mode "AFFace" / "AF" / "MFOnePush" / "MF" / "MFFace"

√

"Auto" / "Manual"

√

Value

String Character string for Focus value

√

MasterBlack

√

Value

String Character string for MasterBlack value

√

Detail

√

Value

String Character string for Detail value

√

Streaming

√

Status

String Status"Stop"(Streaming has stopped or cannot be started.) /"Stopping"(About to stop.) /"Start"(Streaming has started.) /"Starting"(About to start.) /"Waiting"(Waiting for connection_(for.RTSP/RTP)) /"Error"(Error occurred or waiting to start RTSP/RTP streaming and SRT Listener mode)

√

ReturnOverIP

√

Status

String Status"Stop"(Return over IP has stopped or cannot be started.) /"Stopping"(About to stop.) /"Start"(Return over IP has started.) /"Starting"(About to start.) /"Error"

√

Disptv

√

Status

String Status "On" / "Off"

√

CharacterMix

√

Sdi

String Mix "On" / "Off"

√

Hdmi

String Mix "On" / "Off"

√

Videc

String Mix "On" / "Off"

√

TallyLamp

√

Priority

String Priority "Camera" / "Web"

√

Lighting

String Lighting "On" / "Off"

√

Studio lally

String Status "Off" / "Program" / "Preview"

√

SlotA (Status of SlotA)

√

Status

String Status "Select" / "NoSelect" / "NoCard" / "SelectRec" / "NoSelectRec" / "Invalid" / "Unknown"

√

Protect

String Status "Unlock" / "Lock"

√

Remain

String Remaining amount time(minutes) (0-65535)

√

ClipNum

Integer Number of clips(0-4000)

√

RemainWarning

Integer Remaining amount warning(0=No warning/1=Warning)

√

SlotB (Status of SlotB)

√

Status

String Status "Select" / "NoSelect" / "NoCard" / "SelectRec" / "NoSelectRec" / "Invalid" / "Unknown"

√

Protect

String Status "Unlock" / "Lock"

√

Remain

String Remaining amount time(minutes) (0-65535)

√

ClipNum

Integer Number of clips(0-4000)

√

RemainWarning

Integer Remaining amount warning(0=No warning/1=Warning)

√

SlotExt (Status of SlotExt)

√

Status

String

Status "Select" / "NoSelect" / "NoCard" / "SelectRec" / "NoSelectRec" / "Invalid" / "Unknown"

√

Protect

String

Status "Unlock" / "Lock"

√

Remain

String

Remaining amount time(minutes) (0-65535)

√

ClipNum

Integer

Number of clips(0-4000)

√

RemainWarning

Integer

Remaining amount warning(0-No warning/1=Warning)

√

Battery (Status of Battery)

√

Info

String

Battery information display classification "Time"(minutes) / "Capacity"(%) / "Voltage"(V)

√

Level

String

Battery Level

√

0: no battery / 1: plug / 2: plug[] / 3: battery[?] /

√

4: battery[CAL] / 5: battery[empty] / 6: battery[low] /

√

7: battery[middle] / 8: battery/full] /

√

9: battery[no segments] /

√

10: charging battery [empty] /

√

11: charging battery [low] /

√

12: charging battery [middle] /

√

13: charging battery [full] /

√

14: charging battery [no segments]

√

Value

String

Remaining amount time (minutes' % / Voltage, 65535 is impossible gal)(0-1000'10)

√

Luminance

√

Value

Integer

Luminance value

√

Saturation

√

Value

Integer

Saturation value

√

Contrast

√

Value

Integer

Contrast value

√

Sharpness

√

Value

Integer

Sharpness value

√

Hue

√

Value

Integer

Hue value

√

Flip

√

Status

String

Status "On" / "Off"

√

Mirror

√

Status

String

Status "On" / "Off"

√

Tracking

√

Status

String

"On" / "Off"

√

TrackingMode

√

Status

String

"Standard" / "Area" / "Stage" / "WideArea" / "FineAdjustment"

√

TrackingBoundingBox

√

Status

String

"Auto" / "Off" / "On"

√

Enable (Availability of function button switches)

√

Fullauto (Fullauto function)

√

Enable

Integer

switch 0:Disable, 1:Enable

√

Integer

button "ON" switch of fullauto 0:Disable, 1:Enable

√

Off

Integer

button "OFF" switch of fullauto 0:Disable, 1:Enable

√

Preset

Integer

button "PRESET" switch of fullauto 0:Disable, 1:Enable

√

Exposure (Exposure function)

Enable

Integer

switch 0:Disable, 1:Enable

Auto

Integer

button "Auto" switch of fullauto 0:Disable, 1:Enable

Manual

Integer

button "Manual" switch of fullauto 0:Disable, 1:Enable

ShutterPriority

Integer

button ShutterPriority' switch of fullauto 0:Disable, 1:Enable

IrisPriority

Integer

button "IrisPriority" switch of fullauto 0:Disable, 1:Enable

Bright

Integer

button "Bright" switch of exposure 0:Disable, 1:Enable

Iris (Iris function)

√

Enable

Integer

switch 0:Disable, 1:Enable

√

StatusDisp

Integer

Display Value of iris 0:Disable, 1:Enable

√

Manual

Integer

button "MANUAL" switch of iris 0:Disable, 1:Enable PZ400/200 always return 0. √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∩ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∥ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∎ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∿ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∧ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∟ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∂ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∑ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∹ √ \text{ }

button "MANUAL" switch of gain 0:Disable, 1:Enable

√

button "AUTO" switch of gain 0:Disable, 1:Enable

button "LOLUX" switch of gain 0:Disable, 1:Enable

√

button "Variable" switch of gain 0:Disable, 1:Enable

√

button "L" switch of gain 0:Disable, 1:Enable

√

button "M" switch of gain 0:Disable, 1:Enable

√

button "H" switch of gain 0:Disable, 1:Enable

√

button "Up1" switch of gain 0:Disable, 1:Enable

√

button "Up2" switch of gain 0:Disable, 1:Enable

√

button "Down1" switch of gain 0:Disable, 1:Enable

√

button "Down2" switch of gain 0:Disable, 1:Enable

√

AE Level function)

√

button "▲" switch of AElevel 0:Disable, 1:Enable

PZ400/200 always return 0.√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√

Shutter (Shutter function)

√

Enable

Integer

switch 0:Disable, 1:Enable

√

StatusDisp

Integer

Display Value of Shutter 0:Disable, 1:Enable)

√

Off

Integer

button "OFF" switch of shatter 0:Disable, 1:Enable

√

Manual

Integer

button "MANUAL" switch of shatter 0:Disable, 1:Enable

√

Step

Integer

button "STEP" switch of shatter 0:Disable, 1:Enable

√

Variable

Integer

button "VARIABLE" switch of shatter 0:Disable, 1:Enable

√

Eoi

Integer

button "EEI" switch of shatter 0:Disable, 1:Enable

√

Slower

Integer

button "▲" switch of shatter 0:Disable, 1:Enable

√

Faster

Integer

button "▼" switch of shatter 0:Disable, 1:Enable

√

Whb (White balance function)

√

Enable

Integer

switch 0:Disable, 1:Enable

√

StatusDisp

Integer

Display Value of White balance 0:Disable, 1:Enable

√

Auto

Integer

button "Auto" switch of White balance 0:Disable, 1:Enable

√

Indoor

Integer

button "Indoor" switch of White balance 0:Disable, 1:Enable

√

Outdoor

Integer

button "Outdoor" switch of White balance 0:Disable, 1:Enable

√

OnePush

Integer

button "OnePush" switch of White balance 0:Disable, 1:Enable

√

Manual

Integer

button "MANUAL" switch of White balance 0:Disable, 1:Enable

√

Faw

Integer

button "FAW" switch of White balance 0:Disable, 1:Enable

√

Preset

Integer

button "PRESET" switch of White balance 0:Disable, 1:Enable

√

Integer

button "A" switch of White balance 0:Disable, 1:Enable

√

Integer

button "B" switch of White balance 0:Disable, 1:Enable

√

Awb

Integer

button "AWB" switch of White balance 0:Disable, 1:Enable

√

PushAuto

Integer

button "OnePushTrigger" switch of White balance 0:Disable, 1:Enable

√

K3200

Integer

button "3200K" switch of White balance 0:Disable, 1:Enable

√

K5600

Integer

button "5600K" switch of White balance 0:Disable, 1:Enable

√

WhPaintRP

Integer

button "T" switch of White paint 0:Disable, 1:Enable

√

WhPaintRM

Integer

button "I" switch of White paint 0:Disable, 1:Enable

√

WhPaintBP

Integer

button "-" switch of White paint 0:Disable, 1:Enable

√

WhPaintBM

Integer

button "-" switch of White paint 0:Disable, 1:Enable

√

Bright

(Bright function)

√

Enable

Integer

switch 0:Disable, 1:Enable

StatusDisp

Integer

Display Value of Bright 0:Disable, 1:Enable

Integer

button ">” switch of Bright 0:Disable, 1:Enable

√

Down

Integer

button "-" switch of Bright 0:Disable, 1:Enable

√

Zoom

(Zoom function)

√

Enable

integer

switch 0:Disable, 1:Enable

√

StatusDisp

integer

Display Value of Zoom 0:Disable, 1:Enable

√

Tele1

integer

button '->' switch of zoom 0:Disable, 1:Enable

√

Tele2

integer

button '->' switch of zoom 0:Disable, 1:Enable

√

Tele3

integer

button '->'' switch of zoom 0:Disable, 1:Enable

√

Wide1

integer

button '<" switch of zoom 0:Disable, 1:Enable

√

Wide2

integer

button '<" switch of zoom 0:Disable, 1:Enable

√

Wide3

integer

button '<'' switch of zoom 0:Disable, 1:Enable

√

Tele

integer

button "Tele" switch of zoom 0:Disable, 1:Enable

√

Wide

integer

button "Wide" switch of zoom 0:Disable, 1:Enable

√

Preset

integer

button "Preset" switch of zoom 0:Disable, 1:Enable

√

Clear

integer

button "Clear" switch of zoom 0:Disable, 1:Enable

√

Preset1

integer

button "A" switch of zoom 0:Disable, 1:Enable

√

Preset2

integer

button "B" switch of zoom 0:Disable, 1:Enable

√

Preset3

integer

button "C" switch of zoom 0:Disable, 1:Enable

√

Focus (Focus function)

√

Enable

integer

switch 0:Disable, 1:Enable

√

StatusDisp

integer

Display Value of Focus 0:Disable, 1:Enable

√

Manual

integer

button "MANUAL" switch of focus 0:Disable, 1:Enable

√

Auto

integer

button "AUTO" switch of focus 0:Disable, 1:Enable

√

Far1

integer

button '->' switch of focus 0:Disable, 1:Enable

√

Far2

integer

button '->' switch of focus 0:Disable, 1:Enable

√

Far3

integer

button '->'' switch of focus 0:Disable, 1:Enable

√

Near1

integer

button '<" switch of focus 0:Disable, 1:Enable

√

Near2

integer

button '<<' switch of focus 0:Disable, 1:Enable

√

Near3

integer

button '<'' switch of focus 0:Disable, 1:Enable

√

Infinity

integer

button '∞' switch of focus 0:Disable, 1:Enable

√

PushAuto

integer

button "PUSH AUTO" switch of focus 0:Disable, 1:Enable

√

MasterBlack

(MasterBlack function)

√

Enable

integer

switch 0:Disable, 1:Enable

√

StatusDisp

integer

Display Value of MasterBlack 0:Disable, 1:Enable

√

Up1

integer

button '->' switch of MasterBlack 0:Disable, 1:Enable

√

Up2

integer

button '->' switch of MasterBlack 0:Disable, 1:Enable

√

Up3

integer

button '->'' switch of MasterBlack 0:Disable, 1:Enable

√

Down1

integer

button '<" switch of MasterBlack 0:Disable, 1:Enable

√

Down2

integer

button '<" switch of MasterBlack 0:Disable, 1:Enable

√

Down3

integer

button '<'' switch of MasterBlack 0:Disable, 1:Enable

√

(Detail function)

√

Enable

integer

switch 0:Disable, 1:Enable

StatusDisp

integer

Display Value of Detail 0:Disable, 1:Enable

integer

button '->' switch of Detail 0:Disable, 1:Enable

√

Down

integer

button '<" switch of Detail 0:Disable, 1:Enable

√

User (switch of user assignment)

✓

Sw0

Integer

button "SW0" switch of User Switch0:Disable, 1:Enable

✓

Sw1

Integer

button "SW1" switch of User Switch0:Disable, 1:Enable

✓

Sw2

Integer

button "SW2" switch of User Switch0:Disable, 1:Enable

✓

Sw3

Integer

button "SW3" switch of User Switch0:Disable, 1:Enable

✓

Sw4

Integer

button "SW4" switch of User Switch0:Disable, 1:Enable

✓

Sw5

Integer

button "SW5" switch of User Switch0:Disable, 1:Enable

✓

Sw6

Integer

button "SW6" switch of User Switch0:Disable, 1:Enable

✓

Sw7

Integer

button "SW7" switch of User Switch0:Disable, 1:Enable

✓

Sw8

Integer

button "SW8" switch of User Switch0:Disable, 1:Enable

✓

Sw9

Integer

button "SW9" switch of User Switch0:Disable, 1:Enable

✓

Sw10

Integer

button "SW10" switch of User Switch0:Disable, 1:Enable

✓

Sw11

Integer

button "SW11" switch of User Switch0:Disable, 1:Enable

✓

Sw12

Integer

button "SW12" switch of User Switch0:Disable, 1:Enable

✓

Sw13

Integer

button "SW13" switch of User Switch0:Disable, 1:Enable

✓

LensRet

Integer

button "LensRet" switch of User Switch0:Disable, 1:Enable

✓

Sub1

Integer

button "Sub1" switch of User Switch0:Disable, 1:Enable

✓

Sub2

Integer

button "Sub2" switch of User Switch0:Disable, 1:Enable

✓

Sub3

Integer

button "Sub3" switch of User Switch0:Disable, 1:Enable

✓

VfSw1

Integer

button "VfSW1" switch of User Switch0:Disable, 1:Enable

✓

VfSw2

Integer

button "VfSW2" switch of User Switch0:Disable, 1:Enable

✓

Streaming (Streaming function)

✓

Enable

Integer

switch 0:Disable, 1:Enable

✓

StatusDisp

Integer

Display Value of Streaming 0:Disable, 1:Enable

✓

Integer

button "ON" switch of Streaming 0:Disable, 1:Enable

✓

Off

Integer

button "OFF" switch of Streaming 0:Disable, 1:Enable

✓

Disptv (Display function)

✓

Integer

button "ON" switch of Display 0:Disable, 1:Enable

✓

Off

Integer

button "OFF" switch of Display 0:Disable, 1:Enable

✓

CharacterMix (Character mix function)

√

Sdi

Integer

button "SDI" switch of CharacterMix0:Disable, 1:Enable

√

Hdmi

Integer

button "HDMI" switch of CharacterMix0:Disable, 1:Enable

√

Video

Integer

button "Video" switch of CharacterMix0:Disable, 1:Enable

√

Menu (Menu function)

√

Display

Integer

button "DYSPLAY" switch of Menu 0:Disable, 1:Enable

PZ400/200 aways return 0.√ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∪ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∫ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∨ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∦ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∜ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∬ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∭ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∮ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∶ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∯ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∤ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∥ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∖ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∩ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∸ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∟ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∧ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∝ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∤ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∞ ∩ \textbf{=} {PZ400/200 aways return 0.√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√ (∞)

Status

Integer

button "STATUS" switch of Menu 0:Disable, 1:Enable

PZ400/200 aways return 0.√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√√

Integer

button "MENU" switch of Menu 0:Disable, 1:Enable

√

Set

Integer

button "SET" switch of Menu 0:Disable, 1:Enable

√

Cancel

Integer

button "CANCEL" switch of Menu 0:Disable, 1:Enable

√

Integer

button "I" switch of Menu 0:Disable, 1:Enable

√

Down

Integer

button "I" switch of Menu 0:Disable, 1:Enable

√

Left

Integer

button "─" switch of Menu 0:Disable, 1:Enable

√

Right

Integer

button "─" switch of Menu 0:Disable, 1:Enable

√

Luminance (Luminance function)

Enable

Integer

switch 0:Disable, 1:Enable

StatusDisp

Integer

display Value of Luminance 0:Disable, 1:Enable

Integer

button ">” switch of Luminance 0:Disable, 1:Enable

Down

Integer

button "<" switch of Luminance 0:Disable, 1:Enable

Saturation (Saturation function)

Enable

Integer

switch 0:Disable, 1:Enable

StatusDisp

Integer

display Value of Contrast 0:Disable, 1:Enable

Integer

button ">" switch of Saturation 0:Disable, 1:Enable

Down

Integer

button "<" switch of Saturation 0:Disable, 1:Enable

Contrast (Contrast function)

Enable

Integer

switch 0:Disable, 1:Enable

StatusDisp

Integer

display Value of Contrast 0:Disable, 1:Enable

Integer

button ">" switch of Contrast 0:Disable, 1:Enable

Down

Integer

button "<" switch of Contrast 0:Disable, 1:Enable

Sharpness (Sharpness function)

Enable

Integer

switch 0:Disable, 1:Enable

StatusDisp

Integer

display Value of Sharpness 0:Disable, 1:Enable

Integer

button ">" switch of Sharpness 0:Disable, 1:Enable

Down

Integer

button "<" switch of Sharpness 0:Disable, 1:Enable

Hue (Hue function)

Enable

Integer

switch 0:Disable, 1:Enable

StatusDisp

Integer

display Value of Hue 0:Disable, 1:Enable

Integer

button ">" switch of Hue 0:Disable, 1:Enable

Down

Integer

button "<" switch of Hue 0:Disable, 1:Enable

Flip (Flip function)

Enable

Integer

switch 0:Disable, 1:Enable

StatusDisp

Integer

display Value of Flip 0:Disable, 1:Enable

Integer

button ">" switch of Flip 0:Disable, 1:Enable

Down

Integer

button "<" switch of Flip 0:Disable, 1:Enable

Mirror

(Mirror function)

Enable

Integer

switch 0:Disable, 1:Enable

StatusDisp

Integer

display Value of Mirror 0:Disable, 1:Enable

Integer

button ">" switch of Mirror 0:Disable, 1:Enable

Down

Integer

button "<" switch of Mirror 0:Disable, 1:Enable

Tracking (Auto tracking function)

√

integer

button "On" switch of auto tracking 0:Disable, 1:Enable

√

Off

integer

button "Off" switch of auto tracking 0:Disable, 1:Enable

√

TrackingMode (Auto tracking mode function)

√

Standard

integer

button "Standard" switch of auto tracking mode 0:Disable, 1:Enable

√

Area

integer

button "Area" switch of auto tracking mode 0:Disable, 1:Enable

√

Stage

integer

button "Stage" switch of auto tracking mode 0:Disable, 1:Enable

√

WideArea

integer

button "WideArea" switch of auto tracking mode 0:Disable, 1:Enable

√

FineAdjustment

integer

button "FineAdjustment" switch of auto tracking mode 0:Disable, 1:Enable

√

TrackingBoundingBox (Auto tracking bounding box function)

√

Auto

integer

button "Auto" switch of auto tracking bounding box 0:Disable, 1:Enable

√

Off

integer

button "Off" switch of auto tracking bounding box 0:Disable, 1:Enable

√

ButtonString

(String of button name)

√

Gain (Button of gain)

√

String

String of Low gain button

√

String

String of Middle gain button

√

String

String of High gain button

√

User

(Button of user switch allocation)

√

Sw0

String

String of User switch 0"Load Picture File" / "Clip Cutier Trig" / "Backup Trig" /"Clip Review" / "Zebra" / "Markor" / "Lolux" / "Bars" /"Focus Assist" / "OIS" / "AE Lock" / "OK Mark" /"Spot Meter" / "Face Detect" / "White Balance" /"Preset Zoom 1" / "Preset Zoom 2" / "Preset Zoom 3" /"LCD Backlight" / "Flash Band" / "One Push Focus" /"One Push Iris" / "Expanded Focus" /"Live Streaming" / "Auto Focus" / "Histogram" /"AWB" / "Rec" / "Return Video"

√

Sw1

String

String of User switch 2. Same as above.

√

Sw2

String

String of User switch 2. Same as above.

√

Sw3

String

String of User switch 3. Same as above.

√

Sw4

String

String of User switch 4. Same as above.

√

Sw5

String

String of User switch 5. Same as above.

√

Sw6

String

String of User switch 6. Same as above.

√

Sw7

String

String of User switch 7. Same as above.

√

Sw8

String

String of User switch 8. Same as above.

√

Sw9

String

String of User switch 9. Same as above.

√

Sw10

String

String of User switch 10. Same as above.

√

Sw11

String

String of User switch 11. Same as above.

√

Sw12

String

String of User switch 12. Same as above.

√

Sw13

String

String of User switch 13. Same as above.

√

LensRet

String

String of User switch Lens Ret. Same as above.

√

VfSw1

String

String of User Viewfinder switch1 Same as above.

√

VfSw2

String

String of User Viewfinder switch2 Same as above.

√

Wnb (Button of White balance)

√

Preset

String

String of Preset button"PRESET" / "A" / "B" / "FAW"

√

String

String of A button"PRESET" / "A" / "B" / "FAW"

√

String

String of B button"PRESET" / "A" / "B" / "FAW"

√

0-64 can be used for AWB mode and 0-255 for manual white balance mode on KY-PZ100.

Example

{
    "Response": {
    "Requested": "GetCamStatus",
    "Result": "Success",
    "Data": {
    "Camera": {
    "Status": "Standby", "Mode": "Camera", "RecMode": "Normal",
    "TC": "##########", "AspectRatio": "16:9", "WebAccess": "On"
    },
    "Fullauto": {
    "Status": "Auto"
    },
    "Iris": {
    "Status": "Auto", "Value": "0"
    },
    "Gam": {
    "Status": "Aic", "Value": "0"
    },
    "AeLevel": {
    "Status": "AoOn", "Adjust": "On", "Value": "0"
    },
    "Shutter": {
    "Status": "Eel", "Value": "0"
    },
    "Whb": {
    "Status": "Faw", "Value": "0",
    "WhPRScale": 0, "WhPBScale": 0,
    "WhPRPosition": 100, "WhPBPosition": 100,
    "WhPRValue": 100, "WhPBValue": 100
    },
    "Zoom": {
    "Dynamic": "Off", "DynamicPos": 0,
    "Position": 100, "DisplayValue": "Z100"
    },
    "Focus": {
    "Status": "AF", "Value": "0"
    },
    "Streaming": {
    "Status": "Stop"
    },
    "Disprv": {
    "Status": "Off"
    },
    "CharacterMix": {
    "Sci": "Off", "Hdmi": "Off", "Video": "Off"
    },
    "TallyLamp": {
    "Priority": "Camers", "Sw": "Off"
    },
    "SlotA": {
    "Status": "Select", "Protected": "Unlock", "Remain": 120", "ClipNum": 50,
    "RemainWarning": 0
    }
}

{
    "Slots": {
    "Status": "Select", "Protect": "Unlock", "Remain": "140", "ClipNum": 25, "RemainWarning": 0
    },
    "Battery": {
    "Info": "Time", "Level": "8", "Value": "80"
    },
    "Enable": {
    "Fullauto": {
    "Status": 1, "On": 1, "Off": 1, "Preset": 1
    },
    "Ins": {
    "Status": 1, "StatusDisp": 1,
    "Manual": 1, "Auto": 1, "Open1": 1, "Open2": 1, "Open3": 1,
    "Close1": 1, "Close2": 1, "Close3": 1, "PushAuto": 1
    },
    "Gam": {
    "Status": 1, "StatusDisp": 1,
    "Manual": 1, "Agc": 1, "Lotux": 1, "Variable": 1, L": 1, M": 1, H": 1,
    "Up1": 1, "Up2": 1, "Down1": 1, "Down2": 1,
    },
    "AeLevel": {
    "Status": 1, "StatusDisp": 1,
    "AeLevelUp": 1, "AeLevelDown": 1, "AdjustOn": 1, "AdjustOff": 1
    },
    "Shutter": {
    "Status": 1, "StatusDisp": 1,
    "Off": 1, "Manual": 1, "Step": 1, "Variable": 1, "Ear": 1,
    "Slower": 1, "Faster": 1
    },
    "Whb": {
    "Status": 1, "StatusDisp": 1,
    "Manual": 1, "Faw": 1, "Preset": 1, "A": 1, "B": 1, "Adjust": 1,
    "WhPaintBP": 1, "WhPaintBM": 1, "WhPaintBP": 1, "WhPaintBM": 1
    },
    "Zoom": {
    "Status": 1, "StatusDisp": 1,
    "Tele": 1, "Tele2": 1, "Tele3": 1, "Wide1": 1, "Wide2": 1, "Wide3": 1,
    "Tele": 1, "Wide": 1,
    "Preset": 1, "Clear": 1, "Preset1": 1, "Preset2": 1, "Preset3": 1
    },
    "Focus": {
    "Status": 1, "StatusDisp": 1,
    "Manual": 1, "Auto": 1,
    "Far1": 1, "Far2": 1, "Far3": 1, "Near1": 1, "Near2": 1, "Near3": 1,
    "Infinity": 1, "PushAuto": 1
    },
    "User": {
    "Sw1": 1, "Sw2": 1, "Sw3": 1, "Sw4": 1, "Sw5": 1, "SDw6": 1,
    "Sw7": 1, "Sw8": 1, "Sw9": 1, "Sw10": 1, "Sw11": 1, "LensRet": 1
    },
    "Streaming": {
    "On": 1, "Off": 1

j,
"Display": {
"On": 1, "Off": 1
j,
"CharacterMix": {
"SoI": 1, "HdmI": 1, "Video": 1
j,
"Menu": {
"Display": 1, "Status": 1,
"Menu": 1, "Set": 1, "Cancel": 1,
"Up": 1, "Down": 1, "Left": 1, "Right": 1
j,
"ButtonString": {
"Oam": {
"L": "0dB", "M": "6dB", "H": "12dB"
j,
"User": {
"Sw1": "Focus Assist", "Sw2": "OIS", "Sw3": "Lotus", "Sw4": "AE Lock", "Sw5": "Zebra", "Sw6": "Marker", "Sw7": "Clip Review", "Sw8": "Roc", "Sw9": "AWB", "Sw10": "TC Preset", "Sw11": "OK Mark", "LensRot": "Live Streaming"
j,
"Who": {
"Preset": "PRESET", "A": "A", "B": "B"
j
j
j

3.3.2. Recording

Control the recording function

Request Key Style

Type		Value		H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4650	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H 4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H4200	H420
Request
	Command	String	SetCamCtrl	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	V	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	√	✗	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	*	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	×	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	(1)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	/ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
																																																																																																	√	√	√

Example

"Request": /

"Command": "SetCamCtrl",

"SessionID": "7425fcb68ee4d150d4c1f5ace4299a3",

"Params": /

"CamCtrl": "Hec"

Response Key Style

Response

Requested

Sling

SetCamCtrl

✓

Result

Sling

[Result of command processing.]

✓

Example

{

"Response": {

"Requested": "SetCamCtrl",

"Result": "Success"

}

3.3.3. Set zoom position ( obey preset zoom settings of camera )

Control zoom position

In operation, obey preset zoom speed settings of camera,

If you use zooming with slide bar, you should use "SetWebSliderEvent" command.

Request Key Style
Value

Request

Command

Siting

SetZoomCtrl

√

SessionID

Siting

{Session ID in cookie.}

√

Params

Position

Integer

Zoom position "0"~"499"

√

Example

"Request": {

"Command": "SetZoomCtrl",

"SessionID": "7425fcb680c4d15dd4c1f5acc4289a3",

"Params": {

"Position": 400

}

Response Key Style
Value

Response

Requested

Siting

SetZoomCtrl

✓

Result

Siting

(Result of command processing.)

✓

Example

"Response": { "Requested": "SetZoomCtrl", "Result": "Success" }

3.3.4. Live streaming

Control the streaming function

After changing settings with API command, you should check the result of the command before start live streaming.

While menu or status screen is displayed on the camcorder, start/stop streaming command does not work.

Request Key Style
Value

Request

Command

Sling

SetStreamingCtrl

√

SessionID

Sling

(Session ID in cookie.)

√

Params

Streaming

Sling

Streaming Control"On": streaming start / "Off": streaming stop

√

Example

"Request":{

"Command": "SetStreamingCtrl",

"SessionID": "7425fcb58ee4d15dd4c1f5ace4299a3",

"Params":{

"Streaming": "On"

}

Response Key Style
Value

Response

Requested

Siting

Set:StreamingCtrl

✓

Result

Siting

(Result of command processing.)

✓

Example

"Response":

"Requested": "SetStreamingCtrl",

"Result": "Success"

}

3.3.5. Tally lamp control

This command controls tally lamp.

Turning on/off the tally lamp depends on camera settings. "3.7.2. Set tally lamp priority" has the details.

"SetTallyLampCtrl" should be used only when changing the tally lamp state, otherwise it causes performance degradation.

Please do not use "SetTallyLampCtrl" in the studio tally system described in "3.7. How to control studio tally system".

From Web API version 1.07, alarm indication on the camera itself has highest priority compared with all other tally control via web interface.

Request Key Style

Style Value

H4650

H4660

H46a0

H4230

H425x

H4280

L5300

FZ100

H2020

H25a0

FZ400

FZ700

FZ510

Request

Command

String

SetTallyLampCtrl

√

SessionID

String

{Session ID in cookie.}

√

Params

String

Tarry lamp Control"On"(The order turns on LED) /"Off"(The order turns off LED) /

√

Example

"Request": {

"Command": "SetTallyLampCtrl",

"SessionID": "7425fcbx58cc4d15dd4c1f5acc4299a3",

"Params": {

"Sw": "On"

}

Response Key Style

Key Style

Value

H0650

H0660

H0670

H0720

H0725

H0730

L5700

F7700

H0740

H0750

F7400

F7200

F72510

Response

Requested

String SetTallyLampCtrl

√

Result

String (Result of command processing.)

√

Example

"Response": {"Requested": "SetTallyLampCtrl", "Result": "Success"}

3.3.6. Set Web Button Event

Issue a button event

Request Key Style

Style

Value

H4650

HM650

HM6-0

HM200

HM25x

HM280

LS320

PZ100

HC290

HC250

PZ400

PZ200

PZ510

Request

Command

String

SetWebButtonEvent

✓

SessionID

String

(Session ID in cookie.)

✓

Params

(Button parameter is selected by Kind parameter)

Kind

String

Kind of button event

"Fullauto"

✓

"Iris"

✓

"Gain"

✓

"AcLevel"

✓

"Shutter"

✓

"Whb"

✓

"Zoom"

✓

"Focus"

✓

"User"

✓

"Disptv"

✓

"Manu"

✓

"Rec"

✓

"MasterBlack"

✓

"Detail"

✓

"Exposure"

✓

"SpeedWithZoom"

✓

"Bright"

✓

"Luminance"

✓

"Saturation"

✓

"Contrast"

✓

"Sharpness"

✓

"Hue"

✓

"Flip"

✓

"Mirror"

✓

Button

String

Fullauto event

"On" / "Off"

✓

"Presat"

Exposure event

"Auto" / "Manual" / "IrisPriority" (AAE on PZ400/200/510) / "ShutterPriority" (SAE on PZ400/200/510) / "Bright" (only PZ400/200/510)

✓

Iris event

"Manual" / "Auto"

✓

"Open1"

✓

"Open2"

✓

"Open3"

✓

"Close1"

✓

"Close2"

✓

"Close3"

✓

"PushAuto"

✓

Gain event

"Alc"

✓

"Lolux"

✓

"L" / "M" / "H"

✓

"Variable"

✓

"Up1"

✓

"Up2"

✓

"Down1"

✓

"Down2"

✓

"Manual" / "Auto"

AeLevel event

"AeLevelUp" / "AeLevelDown"

✓

"AdjustOn" / "AdjustOff"

✓

"Up" / "Down"

✓

Shutter event

"Off"

✓

"Step"

✓

"Variable"

✓

"Manual"

✓

"Ecl"

✓

"Slower"

✓

"Faster"

✓

Whb event

"Faw"

✓

"Preset" / "A" / "B"

✓

"Adjust" (Awb trigger when PZ100, OnePush trigger when PZ400/200/510)

✓

"WhPaintRP"/'WhPaintRM"

✓

"WhPaintBP"/'WhPaintBM"

✓

"Awb"

✓

"3200K"

✓

"5600K"

✓

"Manual"

✓

"Auto"

✓

"Indoor"

✓

"Outdoor"

✓

"OnePush"

✓

Zoom event

"Tele1" / "Tele2" / "Tele3"

✓

"Wide1" / "Wide2" / "Wide3"

✓

"Stop"※"Tele" or "Wide" events need "Stop" in KY-PZ100 / PZ400 / PZ200 / PZ510.

✓

Focus event

"Manual" / "Auto"

✓

"Far1" / "Far2" / "Far3" / "Near1" / "Near2" / "Near3"

✓

"Infinity"

✓

"PushAuto"

✓

"Stop"※"Far" or "Near" events need "Stop" in KY-PZ100 / PZ400 / PZ200 / PZ510.

✓

MasterBlack event

"Up1" / "Up2" / "Up3" / "Down1" / "Down2" / "Down3"

✓

User event

"Sw0"

✓

"Sw1" / "Sw2" / "Sw3" / "Sw4" / "Sw5" / "Sw6" / "Sw7"

✓

"Sw8"

✓

"Sw9"

✓

"Sw10"

✓

"Sw11"

✓

"Sw12" / "Sw13"

√

"LensRef"

√

"Sub1" / "Sub2" / "Sub3"

√

"VISw1" / "VISw2"

√

Disptv event

"On":(Display on TV) / "Off":(Display on TV)

√

"Sci":(Character Mix)

√

"Hdmi":(Character Mix)

√

"Video":(Character Mix)

√

Menu event

"Display":(Menu) / "Status":(Menu) /

√

"Menu":(Menu) / "Cancel":(Menu) / "Set":(Menu) /

√

"Up":(Menu) / "Down":(Menu) / "Left":(Menu) / "Right":(Menu)

√

※ "Up", "Down", "Left", and "Right" events call assigned function when menu is closed.

√

Rec event

"Start":Recording start / "Stop":Recording stop

√

Detail event "Up" / "Down"

√

SpeedWithZoom event "Off" / "On"

√

Bright event

"Up" / "Down"

√

Luminance event

"Up" / "Down"

√

Saturation event

"Up" / "Down"

√

Contrast event

"Up" / "Down"

√

Sharpness event

"Up" / "Down"

√

Hue event

"Up" / "Down"

√

Flip event

"On" / "Off"

√

Mirror event

"On" / "Off"

√

Example

"Request": {

"Command": "SetWebButtonEvent",

"SessionID": "7425fcbc58cc4d15dd4c1f5acc4299a3",

"Params": {

"Kind": "Fullauto",

"Button": "On"

}

Response Key Style
Value

Response

Requested

String

SetWebButtonEvent

√

Result

String

(Result of command processing.)

√

Example

'Response': { 'Requested": "SetWebButtonEvent", 'Result": "Success" }

3.3.7. Set Web Slider Event

Issue a slider event

You should use 'SetWebSliderEvent' command instead of 'SetZoomCtrl' for zooming with slide bar. You get maximum speed of zoom.

Request Key Style

Value

HM850

HM860

HM870

HM200

HM250

HM260

HM300

HM350

HM400

HM450

HM500

HM550

Command

String

SetWebSliderEvent

✓

SessionID

String

(Session ID in cookie.)

✓

Params

Kind

String

Kind of Slider event

"ZoomBar "

✓

"IrisBar "

✓

Position

Integer

Slider event

ZoomBar 0~499:Zoom position

✓

IrisBar 0~255:Iris position

✓

Example

"Request": {

"Command": "SetWebSliderEvent",

"SessionID": "7425fbcb580c4d15dd4c1f5aco4299a3",

"Params": {

"Kind": "ZoomBar",

"Position": 73

}

Response Key Style Value

Response

Requested

String

SetWebSliderEvent

✓

Result

String

(Result of command processing.)

✓

Example

"Response": {"Requested": "SetWebSliderEvent", "Result": "Success"}

3.3.8. Set Web XYField Event

Issue a two-dimensional slider event

Request Key Style
Value

Request

Command

Siting

SetWebXYFieldEvent

✓

SessionID

Siting

(Session ID in cookie.)

✓

Params

Kind

Siting

Kind of XYField event"WhPaintRB "White paint R and B

✓

XPosition

Integer

XYField eventWhPaintRB "0"~"64" (White paint B position) (PZ400/200/510: Max value of Whb Auto is 20, Whb manual is 255)

✓

YPosition

Integer

XYField eventWhPaintRB "0"~"64" (White paint R position) (PZ400/200/510: Max value of Whb Auto is 20, Whb manual is 255)

✓

Example

"Request":{

"Command": "SetWebXYFieldEvent1",

"SessionID": "7425fbb58se4d15dd4c1f5ace4299a3",

"Params":{

"Kind": "WhPaintRB",

"XPosition": 32,

"YPosition": 32

}

Response Key Style
Value

Response

Requested

String

SetWebXYFieldEvent

✓

Result

String

(Result of command processing.)

✓

Example

"Response": { "Requested": "SetWebXYFieldEvent", "Result": "Success"}

3.3.9. Get GPS Information

Request location information of camera GPS function.

Request Key Style

Syc

Value

H4650

H4660

H 4660

H4660

H466

Request

Command

Siting

GetGPSInfo

√

H4660

H4200

H 4200

H 4100

H 410

H 4100

SessionID

Siting

(Session ID in cookie.)

√

Example

"Request": {Command": "GetCIPInfo",SessionID": "7425fbb68ee4d15dd4c1f5ace4209a3"};

Response Key Style

Response

Requested

Siting

GetGPSInfo

✓

Result

Siting

{Result of command processing.}

✓

Data

AntennaLevel

Siting

"None" / "Losi" / "Searching" / "Level1" / "Level2" / "Level3"

✓

Location

Siting

"+/-"<=/"-<Longitude>"/-/*<Altitude>/*"Latitude + North, -South,00.00000(min) - 90.000000(max)Longitude + East, -West,000.000000(min) - 179.9999999(max)Altitude +, .0.000000(min) - 99999999(max)

✓

*Location data is valid only if AntennaLevel is "Level1", "Level2", or "Level3".

Example

'Response': { "Requested": "GetG/Sinto", "Result": "Success", "Data": { "AntennaLevel": "Level3", "Location": "+35.360452+138.727820+3775.630" }

3.3.10. Seesaw switch operation

Seesaw switch operation command is changing parameter by a seesaw-switch.

Request Key Style

Style		Value		HM650		HM660		HM6u0		HM200		HM25x		HM420		HM330		PZ100		H2900		H25w0		PZ400		PZ700		PZ510
Request
	Command	String	SeesawSwitchOperation	-	√	√	√	√	√	-	-	-	√	√	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
	SessionID	String	(Session ID in cookie.)	-	√	√	√	√	√	-	-	-	√	√	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
	Params
	Kind	String	Kind of Seesaw event"ZoomSeesaw" / "IrisSeesaw" / "MasterBlackSeesaw" / "FocusSeesaw"	-	√	√	√	√	√	-	-	-	√	√	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
	Direction	String	Zoom operation"Stop" / "Wide" / "Tele"Iris operation"Open" / "Close" / "Stop"MasterBlack operation"Up" / "Down" / "Stop"Focus operation"Far" / "Near" / "Stop"	-	√	√	√	√	√	-	-	-	√	√	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
	Speed	Integer	0 - 8	-	√	√	√	√	√	-	-	-	√	√	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

"Speed = 0" has the same meaning as "Direction = Stop".

Example

"Request": {

"Command": "SeesawSwitchOperation",

"SessionID": "7425fbb58ee4d15dd4c1f5ace4299a3",

"Params": {

"King": "MasterBlack",

"Direction": "Up",

"Speed": 5

}

Response Key Style

by Style

Value

HM850

HM860

HM830

HM220

HM250

HM280

LS390

PZ130

HC300

HC540

PZ420

PZ220

PZ510

Response

Requested

Siting

SeesawSwitchOperation

√

Result

Siting

{Result of command processing.}

√

Example

{

"Response": {

"Requested": "SeesawSwitchOperation",

"Result": "Success"

}

3.4.1. Set Pan Tilt Control

Pan / Tilt control command with direct position parameters.

Request Key Style

Value

H16650

H16200

H16250

H13300

H12900

H12500

H12400

F2510

Request

Command

String

SetPTCtrl

√

SessionID

String

(Session ID in cookie.)

√

Params

PanDirection

String

"Stop" / "Left" / "Right" / "Home" / "Position"

√

PanPosition

Integer / String

0~0"(Back left limit)- 17540~17540"(Front)- 35080~35080"(Back right limit)PanPosition is valid when "PanDirection" is "Position".

√

PanSpeed

Integer / String

0 - 30/0"~"30"

√

TiltDirection

String

"Stop" / "Up" / "Down" / "Home" / "Position"

√

TiltPosition

Integer / String

0~0"(Just above)- 9040~9040"(Just beside)- 12080~12080"( diagonally downward)"TiltPosition" is valid when "TiltDirection" is "Position".

√

TiltSpeed

Integer / String

0 - 30/0"~"30"

√

"Speed = 0" has the same meaning as "Direction = Stop".

Example

"Request":{

"Command": "SetPTCtr",

"SessionID": "7425fbcbSsee4d15dd4c1f5ace4298a3",

"Params":{

"PanDirection": "Left",

"PanPosition": 32768,

"PanSpeed": 10,

"TiltDirection": "Up",

"TiltPosition": 32768,

"TiltSpeed": 10

}

Response Key Style
Value

Response

Requested

String

SetPTCtrl

Result

String

(Result of command processing.)

Example

{

"Response": {

"Requested": "SetPTCm".

"Result": "Success"

}

3.4.2. Joystick Operation

Joystick operation command with direction and speed parameters.

For PTZ cameras, it should function as a cursor movement while the MENU is displayed.

When auto tracking is on, the tracking target is switched by pan (left or right).

Request Key Style
Value

Request
	Command	Siring	JoyStickOperation	-	-	-	-	-	-	-	√	-	-	√	√
	SessionID	Siring	{Session ID in cookie.}	-	-	-	-	-	-	-	√	-	-	√	√
	Params
	PanDirection	Siring	"Stop" / "Left" / "Right"	-	-	-	-	-	-	-	√	-	-	√	√
	PanSpeed	Integer	0 - 30	-	-	-	-	-	-	-	√	-	-	√	√
	TiltDirection	Siring	"Stop" / "Up" / "Down"	-	-	-	-	-	-	-	√	-	-	√	√
	TiltSpeed	Integer	0 - 30	-	-	-	-	-	-	-	√	-	-	√	√

"Speed = 0" has the same meaning as "Direction = Stop".

Example

"Request":{

"Command": "JoyStickOperation",

"SessionID": "7425fbb68cc4d15dd4c1f5acc4299a3",

"Params":{

"PanDirection": "Left",

"PanSpeed": 10,

"TiltDirection": "Up",

"TiltSpeed": 10

}

Response Key Style
Value

Response

Requested

String

JoyStickOperation

√

Result

String

(Result of command processing.)

√

Example

"Response":{ "Requested": "JoyStickOperation", "Result": "Success"}

3.4.3. Zoom switch operation

Zoom switch operation command is changing zoom by a seesaw-switch.

Request Key Style
Value

Request

Command

String

ZoomSwitchOperation

✓

SessionID

String

(Session ID in cookie.)

✓

Params

Direction

String

"Stop" / "Wide" / "Tele"

✓

Speed

Integer

0 - 8

✓

Integer / String

0 - 8"0"~"8"

✓

"Speed = 0" has the same meaning as "Direction = Stop".

Example

"Request":{

"Command": "ZoomSwitchOperation",

"SessionID": "7425fbr656ce4d15004c15acc4299a3",

"Params":{

"Direction": "Woe",

"Speed": 5

}

Response Key Style
Value

Response

Requested

String

ZoomSwitchOperation

√

Result

String

(Result of command processing.)

√

Example

"Response": { "Requested": "ZoomSwitchOperation", "Result": "Success"}

3.4.4. Set Pan / Tilt / Zoom preset

Control pan / tilt / zoom preset position.

Request Key Style
Value

Request

Command

Siting

SetPTZPreset

√

SessionID

Siting

(Session ID in cookie.)

√

Params

Integer / String

1 - 100"/1"~"100"(Number of preset position)

√

1 - 255"/1"~"255"(Number of preset position in case of PZ400/200/510)

Operation

Siting

"Move"(Move to preset position)

√

"Set" (Current position is stored)

"Delete"(Delete the preset position)

Example

'Request': {

"Command": "Set"T27"reset",

"SessionID": "7425fbcr56ce4d150d4c15acc4299a3",

"Params": {

"No": 90,

"Operation": "Move"

}

Response Key Style
Value

Response

Requested

Siting

SetPTZPreset

✓

Result

Siting

(Result of command processing.)

✓

Example

{

"Response": {

"Requested": "SetPTZProset",

"Result": "Success"

}

3.4.5. Get camera status (for remote controller)

Request minimum status information of camera function for RM-LP100 and other remote controllers.

It is recommended to use this command every 500 msec or above.

Unnecessary use of this command make performance degradation.

Request Key Style Value

HM650

HM660

HM6a0

HM200

HM25x

HM280

HM300

HM320

HM330

FV100

HC200

HC250

FV400

FV700

FV2510

Request

Command

Siring

GetCamStatusMinimum

√

SessionID

Siring

(Session ID in cookie.)

√

Response Key Style

Value

HH650

HH680

HH690

HH700

HH725x

HH7300

HH7400

HH7500

HH7600

HH7700

Response

Requested

String

GetCamStatusMinimum

√

Result

String

(Result of command processing.)

√

Data

Camera (Camera)

Status

String

Status"NoCard"(no card inserted) / "Stop"(recording stop) / PZ100:200 always return "NoCard"."Standby"(record standby) / "Rec"(recording)/"RecPause"(recording pause)

√

VideoOutputStatus

String

"On" / "Off"

√

MenuStatus

String

"On" / "Off"

√

Exposure

Status

String

"Auto" / "Manual" / "IrisPriority" / "ShutterPriority"Bright"

√

Ins

Status

String

"Auto" / "Manual"

√

Value

String

Character string for iris value

√

Shutter

Status

String

"Auto" / "Manual"

√

Value

String

Character string for Shutter value

√

Gain

Status

String

"Auto" / "Manual"

√

Value

String

Character string for gain value

√

AeLevel

Status

String

"AeOff" / "AeOn"

√

Value

String

Character string for AE level value

√

Whb

Status

String

"Faw" / OnePush" / "3200K" / "5600K" / "Manual"

"OnePush" / "Manual" / "Auto" / "Indoor" / "Outdoor"

√

Value

String

Character string for White Balance value

√

WhPRScale

Integer

Slide bar total length for White paint Red(0-255)

√

WhPBScale

Integer

Slide bar total length for White paint Blue(0-255)

√

WhPRPosition

Integer

Slide bar current position for White paint Red(0-255)

√

WhPBPosition

Integer

Slide bar current position for White paint Blue(0-255)

√

WhPRValue

String

Character string for White paint Red value

√

WhPBValue

String

Character string for White paint Blue value

√

Focus

Status

String

"Auto" / "Manual"

√

Value

String

Character string for Focus value

√

Zoom

Position

Integer

Zoom position (0 499)

√

Detail

Value

String

Character string for detail value

√

Bright

Value

String

Character string for Bright value

√

Streaming

Status

String

Status"Stop"(Streaming has stopped or cannot be started.) /"Stopping"(About to stop.) /"Start"(Streaming has started.) /"Starting"(About to start.) /"Waiting",Waiting for connection...(for.RISP/RTP)..."Error"(Error occurred or waiting to start RTSP/RTP streaming and SRT Listener mode)

√

TallyLamp

Priority

String

Priority "Camera" / "Web"

√

Lighting

String

Lighting "On" / "Off"

√

StudioTally

String

Status "Off" / "Program" / "Preview"

√

Tracking

Status

String

"On" / "Off"

TrackingMode

Status

String

"Standard" / "Area" / "Stage" / "WideArea" / "FineAdjustment"

Enable (Availability of function button switches)

Exposure (Exposure function)

Auto

Integer

button "Auto" switch of exposure 0:Disable, 1:Enable

√

Manual

Integer

button "Manual" switch of exposure 0:Disable, 1:Enable

√

ShutterPriority

Integer

button ShutterPriority" switch of exposure0:Disable, 1:Enable

√

IrisPriority

Integer

button "IrisPriority" switch of exposure0:Disable, 1:Enable

√

Bright

Integer

button "Bright" switch of exposure0:Disable, 1:Enable

√

Iris (Iris function)

Open1

Integer

button "-" switch of iris 0:Disable, 1:Enable

√

Close1

Integer

button "<" switch of iris 0:Disable, 1:Enable

√

Gain (Gain function)
Auto	Integer			Display Value of gain 0:Disable, 1:Enable PZ400/200 always return 0.	-	-	-	-	-	-	√	-	-	√	√
Manual	Integer			button "MANUAL" switch of gain 0:Disable, 1:Enable PZ400/200 always return 0.	-	-	-	-	-	-	√	-	-	√	√
Up1	Integer			button "Up1" switch of gain 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	√	√
Down1	Integer			button "Down1" switch of gain 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	√	√
AeLevel				(AE Level function)
Up	Integer			button "▲" switch of AElevel 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	-	-
Down	Integer			button "▼" switch of AElevel 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	-	-
Shutter (Shutter function)
Slower	Integer			button "▲" switch of shatter 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	√	√
Faster	Integer			button "▼" switch of shatter 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	√	√
Wnb (White balance function)
Faw	Integer			button "FAW" switch of White balance 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	-	-
Auto	Integer			button "Auto" switch of White balance 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	√	√
Indoor	Integer			button "Indoor" switch of White balance 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	√	√
Outdoor	Integer			button "Outdoor" switch of White balance 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	√	√
OnePush	Integer			button "OnePush" switch of White balance 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	√	√
Manual	Integer			button "MANUAL" switch of White balance 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	√	√
Awb	Integer			button "AWB" switch of White balance 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	-	-
K3200	Integer			button "3200K" switch of White balance 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	-	-
K5600	Integer			button "5600K" switch of White balance 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	-	-
AwbTrigger	Integer			button "AWB trigger" switch of White balance 0:Disable, 1:Enable (In case of PZ400/200/510, this may Enable only in OnePush mode.)	-	-	-	-	-	-	√	-	-	√	√
Focus (Focus function)
Manual	Integer			button "MANUAL" switch of focus 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	√	√
Auto	Integer			button "AUTO" switch of focus 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	√	√
Detail				(Detail function)
Up	Integer			button "ON" switch of Detail 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	-	-
Down	Integer			button "OFF" switch of Detail 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	-	-
Bright				(Bright function)
Up	Integer			button "ON" switch of Bright 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	√	√
Down	Integer			button "OFF" switch of Bright 0:Disable, 1:Enable	-	-	-	-	-	-	√	-	-	√	√
Tracking (Auto tracking function)
On	Integer			button "On" switch of auto tracking 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-
Off	Integer			button "Off" switch of auto tracking 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-
TrackingMode (Auto tracking mode function)
Standard	Integer			button "Standard" switch of auto tracking mode 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-
Area	Integer			button "Area" switch of auto tracking mode 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-
Stage	Integer			button "Stage" switch of auto tracking mode 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-
WideArea	Integer			button "WideArea" switch of auto tracking mode 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-
FineAdjustment	Integer			button "FineAdjustment" switch of auto tracking mode 0:Disable, 1:Enable	-	-	-	-	-	-	-	-	-	-	-
	Preset (Availability of preset number)
	1	Integer	PTZ preset number is operatable. 0:Disable, 1:Enable	-	-	-	-	-	+	-	√	-	-	√	√
	2	Integer	PTZ preset number is operatable. 0:Disable, 1:Enable	-	-	-	-	-	-	-	√	-	-	√	√
	·········
	#	Integer	PTZ preset number is operatable. 0:Disable, 1:Enable	-	-	-	-	-	-	-	√	-	-	√	√
	100	Integer	PTZ preset number is operatable. 0:Disable, 1:Enable	-	-	-	-	-	+	-	√	-	-	√	√

Example

{
    "Response": {
    "Requested": "GotCamStatusMinimum",
    "Result": "Success",
    "Data": {
    "Camera": {
    "VideoOutputStatus": "On", "MenuStatus": "On"
    },
    "Exposure": {
    "Status": "Auto"
    },
    "Iris": {
    "Status": "Auto", "Value": "0"
    },
    "Shutter": {
    "Status": "Auto", "Value": "0"
    },
    "Gain": {
    "Status": "Auto", "Value": "0"
    },
    "AeLevel": {
    "Status": "AeOn", "Value": "0"
    },
    "Whb": {
    "Status": "Faw", "Value": "0",
    "WhPRScale": 0, "WhPBScale": 0,
    "WhPRPosition": 64, "WhPBPosition": 64,
    "WhPRValue": "64", "WhPBValue": "64"
    },
    "Focus": {
    "Status": "Auto", "Value": "0"
    },
    "Zoom": {
    "Position": 100
    },
    "Detail": {
    "Value": "100"
    },
    "Streaming": {
    "Status": "Stop"
    },
    "TallyLamp": {
    "Priority": "Camera", "Lighting": "Off"
    },
    "Enable": {
    "Exposure": {

"Auto": 1, "Manual": 1, "ShutterPriority": 1, "InsPriority": 1
},
"Iris": {
"Open": 1, "Close": 1
},
"Gown": {
"Auto": 1, "Manual": 1, "Up": 1, "Down": 1
},
"AeLevel": {
"Up": 1, "Down": 1
},
"Shutter": {
"Slower": 1, "Faster": 1
},
"Who": {
"Faw": 1, "Manual": 1, "OnePush": 1, "K3200": 1, "K5600": 1, "OnePushTrigger": 1
},
"Focus": {
"Auto": 1, "Manual": 1
},
"Detail": {
"Up": 1, "Down": 1
},
"Reset": {
"1": 1, 2": 1, 3": 1, 4": 1, 5": 1, 6": 1, 7": 1, 8": 1, 9": 1, 10": 1,
"1": 1, "2": 1, "3": 1, "4": 1, "5": 1, "6": 1, "7": 1, "8": 1, "9": 1, "10": 1,
"2": 1, "22": 1, "23": 1, "24": 1, "25": 1, "26": 1, "27": 1, "28": 1, "29": 1, "30": 1,
"3": 1, "32": 1, "33": 1, "34": 1, "35": 1, "36": 1, "37": 1, "38": 1, "39": 1, "40": 1,
"4": 1, "42": 1, "43": 1, "44": 1, "45": 1, "46": 1, "47": 1, "48": 1, "49": 1, "50": 1,
"5": 1, "52": 1, "53": 1, "54": 1, "55": 1, "56": 1, "57": 1, "58": 1, "59": 1, "60": 1,
"6": 1, "62": 1, "63": 1, "64": 1, "65": 1, "66": 1, "67": 1, "68": 1, "69": 1, "70": 1,
"7": 1, "72": 1, "73": 1, "74": 1, "75": 1, "76": 1, "77": 1, "78": 1, "79": 1, "80": 1,
"8": 1, "82": 1, "83": 1, "84": 1, "85": 1, "86": 1, "87": 1, "88": 1, "89": 1, "90": 1,
"9": 1, "92": 1, "93": 1, "94": 1, "95": 1, "96": 1, "97": 1, "98": 1, "99": 1, "100": 1
}
}

3.4.6. Get Pan & Tilt Positions

Get Pan & Tilt positions

Request Key Style

Syc

Value

Request

Command

String

GetPTPosition

SessionID

String

(Session ID in cookie.)

Example

"Request": {

"Command": "Get"TPosition",

"SessionID": "7425fbb58ee4d15dd4c1f5ace4299a3",

}

Response Key Style

Response

Requested

Siting

GetPTPosition

√

Result

Siting

{Result of command processing.}

√

Data

Pan

Integer

0(Back left limit)- 17540(Front)- 35080(Back right limit)

√

Tilt

Integer

0(Just above)- 9040(Just beside)- 12080(Diagonally downward)

√

Example

'Response';{ "Requested": "GetPTPosition", "Result": "Success", "Data": { "Pan": 17540, "Tilt": 9040 }}

3.5. How to acquire JPEG data

These commands enables to start JPEG encoding and acquire JPEG image data.

'3.5.1 JpegEncode' command with parameter 'Start' can be used to start encoding.

JPEG data is acquired followed by a header in a response for 'get_jpg_cgi' described in '3.5.2 Acquire JPEG data'.

3.5.1. JPEG encode control

Start / stops the encoding function of the camera.

It is necessary to start encoding to acquire JPEG data.

When other users have already used it, it returns disable error. Even in this case, you can acquire JPEG data.

Please be carefully to stop JPEG encoding, because other users may acquire JPEG data.

There is a possibility stop encoding command returns error if another client has already stopped encoding

In the following cases, you cannot send the command to the camera.

The camera is in Live Streaming mode.

The camera is in IFB Streaming mode.

Request Key Style
Value

Request

Command

String

JpegEncode

✓

SessionID

String

(Session ID in cookie.)

✓

Params

Operate

String

"Start" / "Stop"

✓

Example

{

"Request": {

"Command": "JocgEncode",

"SessionID": "7425fbbcb8see4d15dd4c1f5ace4269a3",

"Params": {

"Operate": "Start"

}

Response Key Style
Value

Response

Requested

Siting

JpegEncode

√

Result

Siting

(Result of command processing.)

√

Example

{

"Response": {

"Requested": "JpegEncode",

"Result": "Success"

}

3.5.2. Set JPEG encode size

Setting image resolution of acquiring JPEG data.

Request Key Size Value
Request
Command	Siring	SetJpegEncodeSize
SessionID	Siring	(Session ID in cookie.)
"Params
Size	Siring	"640x360" / "320x180"

Response
Requested	Siting	SetUpegEncodeSize
Result	Siting	(Result of command processing.)

3.5.3. Acquire JPEG data

You can acquire JPEG image followed by a header when accessing to the URL below. Content type of the response is image/jpeg.

Access format

HW850

HW860

HW8200

HW825x

HW8200

HW850

HW860

HW870

HW880

HW890

HW810

HW820

HW830

HW840

HW850

HW870

HW890

HW860

HW850

HW840

HW830

HW820

HW810

HW805

HW800

HW805

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

HW810

HW815

3.6. How to use Interruptible Feedback Function

These commands enables to use interruptible feedback{IFB} function.

IFB is used for returning audio to the camera from the controller.

3.6.1. Get interruptible feedback settings

Get IFB function parameters.

Request Key Syc

Value

Request

Command

String

GetIFBSettings

√

SessionID

String

(Session ID in cookie.)

√

Example

"Request": {

"Command": "GetIFBSettings",

"SessionID": "7425fcbv58cc04d150d4c1f5acc4299a3",

}

Response Key Style Value

Requested

String

GetIFBSettings

√

Result

String

(Result of command processing.)

√

Data

Function

String

Switch to enable IFB function. "Enable" / "Disable"

√

Address

String

Address of IFB server. "xxx.xxx.xxx.xxx"

√

Port

Integer

Port of IFB server. 1 - 65535

√

Mountpoint

String

Mountpoint on IFB server. Max 62 characters.

√

Example

"Response": [

"Requested": "GenITBSettings",

"Result": "Success",

"Data": {

"Function": "Enable",

"Address": "192.168.0.11",

"Port": 5000,

"Mountpoint": "DB90TX"

}

3.6.2. Set interruptible feedback settings

Set IFB function parameters. It is necessary to use return audio at camera.

This command enables / disables the IFB function of the camera.

Request Key Size

Value

Request

Command

String

Set!FBSettings

√

SessionID

String

(Session ID in cookie.)

√

Params

Function

String

Switch to enable IFB function. "Enable" / "Disable"

√

Address

String

Address of IFB server. "xxx.xxx.xxx.xxx"

√

Port

Integer

Port of IFB server. 1 - 65535

√

Mountpoint

String

Mountpoint on IFB server, Max 62 characters.

√

Example

{

"Request": {

"Command": "SetF6Settings,

"SessionID": "7425fbcb58cc4d15dd4c15acc4299a3",

"Params": {

"Function": "Enable",

"Address": "192.188.0.11",

"Port": 5000,

"Mountpoint": "DB90TX"

}

Response Key Style Value

Response

Requested

String

SetIFBSettings

✓

Result

String

(Result of command processing.)

✓

Example

{

"Response": {

"Required": "Set/FBSettings",

"Result": "Success"

}

3.6.3. Set interruptible feedback streaming control

This command is used to start/stop IFB streaming

Request Key Style

Type

Value

H4650

H4700

H 4700

H4700

H470

Request

Command

String

SetIFBCtrl

√

H4650

H4100

H 4700

H 470

SessionID

String

(Session ID in cookie.)

√

Params

Example

"Request":{ "Command": "SetFBCtrl", "SessionID": "7425fbbcb68ce4d15dd4c1f5ace4299a3", "Params": { "Streaming": "Start" } }

Response Key Style

Key Style: Value

Response

Requested

Sling

SetIFBCtrl

√

Result

Sling

{Result of command processing.}

√

Example

"Response": { "Requested": "SetFBCtrl", "Result": "Success" }

3.7. How to control Studio Tally System

"SetStudioTally" command indicates tally condition to the camera and it displays "PGM" or "PVW" on the LCD

Menu settings on the camera which affects tally lamp control are as follows.

On the studio tally system described in this chapter, "SetTally LampCtrl" command should not be used.

"SetStudioTally" and "SetTallyLampPriority" commands can control studio tally system.

From Web API version 1.07, alarm indication on the camera itself has highest priority compared with all other tally control via web interface.

This description is not for PZ400/200/510.

System...

Tally Lamp

Off, Rec, Live St

System...

Tally System

Studio*,Internal

If the Tally System setting is 'Studio'.

System...

Front Tally

Off, On*

Back Tally

Off, On*

Tally lamp is controlled by Web API when selected.

3.7.1. Studio tally control

This command controls studio tally indication.

Turning on/off the tally lamp depends on camera settings.

Refer to *3.7.4. Relation of commands on Studio tally system* about Tally lamp control.

"SetStudioTally" should be used only when changing the tally state, otherwise it causes performance degradation.

Request Key Style
Value

Request

Command

String

SetStudioTally

√

SessionID

String

(Session ID in cookie.)

√

Params

Indication

String

"Oil"(not Indicate status on LCD)/"Program"(Indicate PGM on LCD)/"Preview"(Indicate PVW on LCD)

√

Example

"Request": {

"Command": "SotStudioTally",

"SessionID": "7425fbb68ee4d15dd4c1f5ace4209e3",

"Params": {

"Indication": "Program"

}

Response Key Style
Value

Response

Requested

String

SetStudioTally

√

Result

String

(Result of command processing.)

√

Example

"Response": { "Requested": "SetStudioTally", "Result": "Success"}

3.7.2. Set tally lamp priority

Set indication priority setting of the tally lamp.

You should set tally lamp priority to "Web" before using the tally lamp via API.

Menu setting on the camera is fixed to "External/Studio" when setting changed priority to "Web" and cannot change it.

It becomes changeable when priority setting is "Camera"

This command should be used only when the tally lamp status need to be changed, otherwise it causes performance degradation.

'SetTallyLampPriority' changes camera setting as follows.

Camera stores prior state before switching to the "Web" priority and it resumes former state when you return the priority to "Camera".

HM660/HM200/HM25x/HM280/PZ100/HC5x0

System...Tally LampOff, Rec. Live Streaming, Rec/Live Streaming, External

HM8x0/HC900

This setting becomes "Studio" when the priority is set to "Web".

System...

Tally System

Studio.Internal

This setting becomes "On" when the priority is set to "Web".

System...
Front Tally
Off, Rec, Live Streaming, Rec/Live Streaming	*
Off, On **
Back Tally
Off, Rec, Live Streaming, Rec/Live Streaming	*
Off, On **

* If the Tally System setting is "Internal"

** If the Tally System setting is "Studio".

Request Key Style
Value

Request

Command

String

SetTallyLampPriority

✓

SessionID

String

{Session ID in cookie.}

✓

Params

Priority

Integer

"Camera"(Camera is given priority of control.)/

✓

"Web"(Web is given priority of control.)

✓

Example

{
    "Requests": {
    "Command": "SetTally1.ampPriority",
    "SessionID": "7425f0cb58cc4d15dd4c15acc4299a3",
    "Params": {
    "Priority": "Camera"
    }
    }
}

Response Key Style
Value

Response

Requested

String

SetTallyLampPriority

✓

Result

String

(Result of command processing.)

✓

Example

{
    "Response"; {
    "Requested": "SetTallyLampPriority",
    "Result": "Success"
    }
}

System Chart
graph TD A["Studio tally control system"] --> B["Network switch"] B --> C1["GY-HM8x0"] B --> C2["GY-HC900"] B --> C3["KY-PZ100"] B --> C4["KY-PZ400"] B --> C5["GY-HM660"] B --> C6["GY-HM200"] B --> C7["GY-HM25x"] B --> C8["GY-HM280"] B --> C9["GY-HC5x0"] C1 --> D1["LED lighting of each model"] C2 --…

LCD indication image
PGM

graph TD A["Studio tally control system"] --> B["GetCamStatus* returns status of camera. Priority of Tally Lamp is Camera."] A --> C["SetStudioTally Indication:Program."] A --> D["GetCamStatus* returns status of camera."] A --> E["SetTallyLampPriority Priority:Web."] A --> F["GetCamStatus* returns s…

* "GetCamStatusMinimum" command can be used to acquire the status as well on KY-PZ100/400/510. * KY-PZ400/510 is not indication of studio tally status on LCD.

3.8. Return over IP Command

These commands enables to use Return over IP function.

Zixi and SRT streaming modes are mutually exclusive on GY-HC5x0 and GY-HC900.

Only "Zixi" or "Srt" parameter is effective according to the streaming mode

Current mode can be checked using GetSystemInfo response.

3.8.1. GetCurrentReturnOverIpServerID

Get current server ID for Return over IP function.

There are four server settings for Return over IP,

Request Key style Value

Request

Command

String

GetCurrentReturnOverIpServerID

√

SessionID

String

(Session ID in cookie.)

√

Response Key Style Value

Response

Requested

String

GetCurrentReturnOverIpServerID

√

Result

String

(Result of command processing.)

√

Data

Integer

0:server1, 1: server2, 2: server3, 3: server4

√

Example

"Response": [

"Requested": "GetCurrentReturnOverIoServerID",

"Result": "Success",

"Data": {

"ID": 0

}

3.8.2. SetCurrentReturnOverIpServerID

Set current server ID for Return over IP function.

Choose the server ID to use in Return over IP function.

Request Key Size Value

Request

Command

Siting

SetCurrentReturnOverlpServerID

√

SessionID

Siting

(Session ID in cookie.)

√

Params

integer

0:server1, 1: server2, 2: server3, 3: server4

√

Example

{

"Command": "SetCurrentReturnOvertoServerID",

"SessionID": "7425f0cb58ee4d15dd4c1f5ace4299a3",

"Params": {

"ID": 0

}

Response Key Style

Value

H-0.05

H-0.06

H-0.20

H-0.25

H-0.28

L-3.00

L-7.10

H-0.30

H-0.50

L-4.00

L-2.00

P-2.50

Response

Requested

Siting

SetCurrentReturnOverlpServerID

—

√

—

Result

Siting

(Result of command processing.)

—

√

—

Example

{

"Response": {

"Requested": "SetCurrentReturnOveripServerID",

"Result": "Success"

}

3.8.3. GetReturnOverlpServerSettings

Get Return over IP settings for each server ID.

Request Key Style
Value

Request

Command

Siring

GetReturnOverlpServerSettings

√

SessionID

Siring

(Session ID in cookie.)

√

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

√

Example

"Request": {
"Command": "GetReturnOveripServerSettings",
"SessionID": "7425fcbc58ee4d15cd4c1f5ace4299a3",
"Params": {
"ID": 1
}
}

Response Key Style
Value

Response
Requested	String	GetReturnOverlpServerSettings	-	-	-	-	-	-	-	-	-	✓	✓	-
Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	✓	✓	-
Data
Alias	String	(Another name of server)	-	-	-	-	-	-	-	-	-	✓	✓	-
Type	String	"RTSP/RTP" / "Icecast" / "SRT"	-	-	-	-	-	-	-	-	-	✓	✓	-
RTSP/RTP (Selected by Type)
Protocol	String	"UDP"/"TCP"	-	-	-	-	-	-	+	-	-	✓	✓	-
SrcAddress	String	(IP address)	-	-	-	-	-	-	-	-	-	✓	✓	-
SrcPort	Integer	(Port number)	-	-	-	-	-	-	-	-	-	✓	✓	-
StreamId	String	(Stream ID)	-	-	-	-	-	-	+	-	-	✓	✓	-
Username	String	(User name)	-	-	-	-	-	-	-	-	-	✓	✓	-
Password	String	(Password for RTSP/RTP)	-	-	-	-	-	-	+	-	-	✓	✓	-
Resolution	integer	0:1280x720	-	-	-	-	-	-	-	-	-	✓	✓	-
FrameRate	integer	1:60p, 2:30p, 4:50p, 5:25p	-	-	-	-	-	-	+	-	-	✓	✓	-
Zixi (Selected by Type)
SrcAddress	string	(IP address)	-	-	-	-	-	-	+	-	-	✓	✓	-
SrcPort	integer	(Port number)	-	-	-	-	-	-	-	-	-	✓	✓	-
StreamId	string	(Stream ID for ZIXI)	-	-	-	-	-	-	+	-	-	✓	✓	-
Password	string	(Password for ZIXI)	-	-	-	-	-	-	-	-	-	✓	✓	-
Name	string	(Name for ZIXI)	-	-	-	-	-	-	-	-	-	✓	✓	-
Latency	integer	0:Off, 1:Low, 2: Medium	-	-	-	-	-	-	+	-	-	✓	✓	-
Resolution	integer	0:1280x720	-	-	-	-	-	-	-	-	-	✓	✓	-
FrameRate	integer	1:60p, 2:30p, 4:50p, 5:25p.	-	-	-	-	-	-	-	-	-	✓	✓	-
Icecast (Selected by Type)
SrcAddress	String	(IP address)	-	-	-	-	-	-	+	-	-	✓	✓	-
SrcPort	Integer	(Port number)	-	-	-	-	-	-	-	-	-	✓	✓	-
Mountpoint	String	(Mountpoint)	-	-	-	-	-	-	+	-	-	✓	✓	-
SRT		(Selected by Type)
SrcAddress	string	(IP address) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Port	integer	(Port number) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ConnectionMode	integer	0: Caller 1: Listener, 2: Hendezvous	-	-	-	-	-	-	+	-	-	✓	✓	-
Latency	integer	20 - 8000 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Encryption	integer	0: Off, 1: ON - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Passphrase	string	[Passphrase for SHT] - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – — – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – - – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – —– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – —	–	–	–	–	–	–	–	–	–	–	–	–

Example

{
    'Response':
    'Requested": "GetReturnOveripServerSettings",
    'Result": "Success",
    'Data':
    "Alias": "Server1",
    "Type": "RTSP",
    "Rtsp": {
    "Protocol": "UDP",
    "SrcAddress": "192.168.0.1",
    "SrcPort": 6504
    "Streamio": "HC900-1234",
    "Username": "Jvckenwood",
    "Password": "aoodegnyi"
    }
    }
}

3.8.3.1. AvailableTypeOfReturnOverIP

Get Available type.

Request Key Style Value

H4650

H4660

H46a0

H4630

H4620

H5310

PZ100

H2000

H2500

PZ400

PZ200

PZ510

Request

Command

String

AvailableTypeOfReturnOverIP

√

SessionID

String

(Session ID in cookie.)

√

Response Key Style

Value

HH650

HH660

HH200

HH250

HH290

LS300

V7/001

HD200

HD250

V7401

V72001

PZ510

Response

Requested

String

AvailableTypeOfReturnOverIP

√

Result

String

[Result of command processing,]

√

Data

AvailableType

√

RTSP/RTP

Integer

0 : unselectable , 1 : selectable

√

Icecast

Integer

0 : unselectable , 1 : selectable

√

Zixi

Integer

0 : unselectable , 1 : selectable

√

SRT

Integer

0 : unselectable , 1 : selectable

√

Example

{
    "Response": {
    "Requested": "AvailableTypeOfReturnOverP"
    "Result": "Success",
    "Data": {
    "AvailableType": {
    "RTSP/RTP": 1,
    "Icecast": 1,
    "Zxi": 0
    }
    }
}

3.8.3.2. AvailableFrameRateOfReturnOverIP

Get available frame rate.

Request Key Style
Value

Request

Command

Siring

AvailableFrameRateOfReturnOverIP

√

SessionID

Siring

(Session ID in cookie.)

√

Params

RecordingFrameRate

Siring

"60p" / "50p" / "60i" / "50i" / "30p" / "25p"

√

Example

"Request":{

"Command": "AvailableFrameRateOffsetReturnOverIP",

"SessionID": "7425f0cb68ee4d15dd4c1f5ace4299e3",

"Params":{

"RecordingFrameRate": "60p"

}

Response Key Style
Value

Response

Requested

Siting

AvailableFrameRateOfReturnOverIP

√

Result

Siting

(Result of command processing.)

√

Data

RecordingFrameRate

Siting

"60p" / "50p" / "60i" / "50i" / "30p" / "25p"

√

AvailableFrameRate

√

"60p"

Integer

0 : unselectable, 1 : selectable

√

"30p"

Integer

0 : unselectable, 1 : selectable

√

"50p"

Integer

0 : unselectable, 1 : selectable

√

"25p"

Integer

0 : unselectable, 1 : selectable

√

Example

"Response": {

"Requested": "AvailableFrameRateOfReturnOverN",

"Result": "Success",

"Data": {

"RecordingFrameRate": "60p"

"AvailableFrameRate": {

"60p": 1,

"30p": 1,

"50p": 0,

"25p": 0

}

3.8.4. SetReturnOverlpServerSettingsRTSP

Set Return over IP settings for each server ID. This command is used for RTSP/RTP protocol

Request Key Size Value
Command	String	SetReturnOverIpServerSettingsRTSP
SessionID	String	(Session ID in cookie.)
Params
ID	Integer	0:server1, 1: server2, 2: server3, 3: server4
Alias	String	(Another name of server)
Protocol	String	"UDP"/"TCP"
SrcAddress	String	(IP address)
SrcPort	Integer	(Port number)
StreamId	String	(Stream ID)
Username	String	(User name)
Password	String	(Password for RTSP/RTP)
FrameRate	Integer	1.60p, 2.30p, 4.50p, 5.25p

Example

{
    "Request": {
    "Command": "SetReturnOverpServerSettingsRTSP",
    "SessionID": "74250cb58ee4d150d4c1f5ace4299e3",
    "Params": {
    "ID": 1,
    "Alias": "Server1",
    "Protocol": "UDP",
    "SrcAddress": "192.168.0.1",
    "SrcPort": 6504
    "Streamid": "HC900-1234",
    "Username": "Jockenwood",
    "Password": "abcde",
    "FrameRate": 1
    }
}

Response Key Style
Value

Response

Requested

String

SetReturnOverlpServerSettingsRTSP

Result

String

(Result of command processing.)

Example

"Response": { "Requested": "SetReturnOveripServerSettingsATSP". "Result": "Success"}

3.8.5. SetReturnOverIpServerSettingsZIXI

Set Return over IP settings for each server ID.

This command is used for Zixi protocol.

Request Key Size Value

Command

String

SetReturnOverIpServerSettingsZIXI

√

SessionID

String

(Session ID in cookie.)

√

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

√

Alias

String

(Another name of server)

√

SrcAddress

String

(IP address)

√

SrcPort

Integer

(Port number)

√

StreamId

String

(Stream ID for ZIXI)

√

Password

String

(Password for ZIXI)

√

Name

String

(Name for ZIXI)

√

Latency

Integer

0:Low, 1:Medium, 2:Minimum(Zxi OFF), 3:High

√

FrameRate

Integer

1:60p, 2:30p, 4:50p, 5:25p

√

Example

{
    "Request": {
    "Command": "SetReturnOverIpServerSettingsZIXI",
    "SessionID": "7425lcbc8see4d15dd4c15face4299a3",
    "Params": {
    "ID": 1.
    "Alias": "Server1",
    "SrcAddress": "182.168.0.1",
    "SrcPort": 2088,
    "StreamId": "VM650-1234",
    "Password": "abcde",
    "Name": "Uckenwood",
    "Latency": 0.
    "FrameRate": 1
    }
    }
}

Response Key Style
Value

Response

Requested

String

SetReturnOverIpServerSettingsZIXI

√

Result

String

(Result of command processing.)

√

Example

'Response': { 'Requested": "SetReturnOveripServerSettingsZIXI", 'Result": "Success" }

3.8.6. SetReturnOverIpServerSettingsIcecast

Set Return over IP settings for each server ID.

This command is used for Icecast protocol.

Request Key Syc

Value

IN8550

IN860

IN862

IN825s

IN8280

IN8300

IN8320

IN8340

IN8360

IN8390

√

Command

Sling

SetReturnOverlpServerSettingsIcecast

√

SessionID

Sling

(Session ID in cookie.)

√

Params

Integer

0:server1, 1: server2, 2: server3, 3: server4

√

Alias

String

{Another name of server}

√

SrcAddress

Sling

(IP address)

√

SrcPort

Integer

(Port number)

√

Mountpoint

Sling

(Mountpoint)

√

Example

"Request":{

"Command": "SetReturnOverIpServerSettingsfcocast",

"SessionID": "7425fcbc8see4d15dd4c1f5ace4299a3",

"Params":{

"ID": 1,

"Alias": "Server1",

"SrcAddress": "192.168.0.1",

"SrcPort": 6504,

"Mountpoint": "abcdeig"

}

Response Key Style

Value

Response

Requested

String

SetReturnOverIpServerSettingslococast

√

Result

Siting

[Result of command processing.]

√

Example

"Response": {"Requested": "SetReturn/OverlapServerSettingsforecast", "Result": "Success"}

3.8.7. SetReturnOverIpCtrl

This command is used to start/stop Return over IP.

Request Key Style

Value

H4650

H4660

H46a0

H4620

H4625x

H4630

PZ100

H4600

H4500

PZ400

PZ200

PZ510

Request

Command

Siting

SetReturnOverlpCtrl

√

SessionID

Siting

(Session ID in cookie.)

√

Params

Operate

Siting

Streaming Control"Start": start Return over IP / "Stop": stop Return over IP

√

Response Key Style Value

H4650

H4660

H4620

H4630

L5320

P7100

HC900

P7400

P7200

P25-0

Response

Requested

Siting

SetReturnOverlpCtrl

√

Result

Siting

{Result of command processing.}

√

3.8.8. SetReturnOverIpServerSettingsSRT

Set Return over IP settings for each server ID.

This command is used for SRT protocol.

Request Key Size Value

Command	String	SetReturnOverIpServerSettingsSRT	-	-	-	-	-	-	-	-	√	√	-
SessionID	String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	√	√	-
Params
ID	Integer	0:server1, 1: server2, 2: server3, 3: server4	-	-	-	-	-	-	-	-	√	√	-
Alias	String	(Another name of server)	-	-	-	-	-	-	-	-	√	√	-
SrcAddress	String	(IP address)	-	-	-	-	-	-	-	-	√	√	-
Port	Integer	(Port number)	-	-	-	-	-	-	-	-	√	√	-
ConnectionMode	Integer	0: Caller 1: Listener, 2: Rendezvous	-	-	-	-	-	-	-	-	√	√	-
Latency	Integer	20 - 8000	-	-	-	-	-	-	-	-	√	√	-
Encryption	Integer	0: OFF, 1: ON	-	-	-	-	-	-	-	-	√	√	-
Passphrase	String	(Passphrase for SRT)	-	-	-	-	-	-	-	-	√	√	-
FrameRate	Integer	1.60p, 2.30p, 4.50p, 5.25p	-	-	-	-	-	-	-	-	√	√	-

Example

{
    "Request": {
    "Command": "SetReturnOverIoServerSettingsSRT",
    "SessionID": "7425fccb58ee-Ad15dd4c1f5acc4299a3",
    "Params": {
    "ID": 1,
    "Alias": "Server1",
    "SrcAddress": "162.168.0.1",
    "Port": 2088,
    "ConnectionMode": 0,
    "Latency": 20,
    "Encryption": 0,
    "Passphrase": "aboveghyklmn"
    "FrameRate": 1,
    }
    }
}

Response Key Style
Value

Response

Requested

String

SetReturnOverlpServerSettingsSRT

Result

String

(Result of command processing.)

Example

"Response": { "Requested": "SetReturnOveripServerSettingsSRT". "Result": "Success"}

3.9 Auto Tracking Command

3.9.1. Set Auto Tracking On/Off

Sets auto tracking on/off.

You can get the current settings with "GetCamStatus" or "GetCamStatusMinimum".

Request Key Style Value

HM650

HM660

HM6w0

HM200

HM25x

HM290

LS300

FZ 00

HC900

HC5w0

F14w0

FZZ00

FZ510

Request

Command

String

SetTracking

✓

SessionID

String

{Session ID in cookie.}

✓

Params

|Tracking

String

"On" / "Off"

✓

3.9.2. Set Auto Tracking Mode

Sets auto tracking mode.

You can get the current settings with "GetCamStatus" or "GetCamStatusMinimum".

Request Key Style
Value

Request

Command

String

SetTrackingMode

✓

SessionID

String

(Session ID in cookie.)

✓

Params

TrackingMode

String

"Standard" / "Area" / "Stage" / "WideArea" / "FineAdjustment"

✓

Example

{

"Request": {

"Command": "SetTrackingMode",

"SessionID": "7425fbb68ee4d150d4c1f5ace4299a3",

"Params": {

"TrackingMode": "Standard"

}

Response Key Style
Value

Response

Requested

String

SetTrackingMode

Result

String

(Result of command processing.)

Example

{

"Response": {

"Requested": "SetTrackingMode",

"Result": "Success"

}

3.9.3. Set Auto Tracking Bounding Box

Sets auto tracking bounding box.

You can get the current settings with "GetCamStatus" or "GetCamStatusMinimum".

Request Key Style
Value

Request

Command

String

SetTrackingBoundingBox

—

√

SessionID

String

(Session ID in cookie.)

—

√

Params

|TrackingBoundingBox

String

"Auto" / "Off" / "On"

—

√

Example

{

"Request": {

"Command": "SetTrackingBoundingBox",

"SessionID": "7425fbcb58ee4d15dd4c1f5ace4299a3",

"Params": {

"TrackingBoundingBox": "Auto"

}

Response Key Style
Value

Response

Requested

String

SetTrackingBoundingBox

Result

String

(Result of command processing.)

Example

{

"Response": {

"Requested": "SetTrackingBoundingBox".

"Result": "Success"

}

3.9.4. Get Auto Tracking Settings of Standard Mode

Request all auto tracking settings of Standard mode.

Request Key Style

Value

H0850

H0860

H0220

H0255

H0280

L5300

Z7100

HC900

HC960

P4700

P2200

P5700

Request

Command

String

GetTrackingStandard

SessionID

String

{Session ID in cookie.}

Example

"Request": {

"Command": "GetTrackingStandard",

"SessionID": "7425fbcb58ee4d15dd4c1f5ace4299a3"

}

Response Key Style Value

Requested	String	GetTrackingStandard	-	-	-	-	-	-	-	-	-	-	-	✓
Result	String	{Result of command processing.}	-	-	-	-	-	-	-	-	-	-	-	✓
Data
AutoZoom	String	"On" / "Off"	-	-	-	-	-	-	-	-	-	-	-	✓
AutoTilt	String	"On" / "Off"	-	-	-	-	-	-	-	-	-	-	-	✓
TargetRetentionTime	Integer	5.8, 10, 12, 15	-	-	-	-	-	-	-	-	-	-	-	✓
FigureSize	String	"Full" / "Upper" / "Close" / "Custom"	-	-	-	-	-	-	-	-	-	-	-	✓
FigureSizeCustom	Integer	80-290 (This parameter is valid only when 'FigureSize' is 'Custom'.)	-	-	-	-	-	-	+	-	-	-	-	✓
VerticalPosition	Integer	-5 - 5	-	-	-	-	-	-	-	-	-	-	-	✓
HorizontalPosition	String	"Left" / "Center" / "Right"	-	-	-	-	-	-	-	-	-	-	-	✓
StartPosition	String	"CurrentPosition" / "HomePosition" / "Preset1"	-	-	-	-	-	-	-	-	-	-	-	✓

Example Example ('FigureSize' is 'Custom')

{

"Response": { "Response": {

"Required": "GetTrackingStandard",

"Result": "Success", "Result": "Success",

"Data": { "Data": {

"AutoZoom": "On", "AutoZoom": "On",

"AutoTill": "On", "AutoTill": "On",

"TargetRetentionTime": 10,

"FigureSize": "Full",

"VerticalPosition": 0, "FigureSizeCustom": 80,

"HorizontalPosition": "Center", "VerticalPosition": 0,

"StartPosition": "CurrentPosition"

}

"Requested": "GoITrackingStandard",

"TargetRetentionTime": 10,

"FigureSize": "Custom",

"HorizontalPosition": "Center",

"StartPosition": "CurrentPosition" }

3.9.5. Set Auto Zoom of Standard Mode of Auto Tracking

Set auto zoom of Standard mode of auto tracking.

Request Key Style Value

Request

Command

String

SetTrackingStandardAutoZoom

✓

SessionID

String

(Session ID in cookie.)

✓

Params

AutoZoom

String

"On" / "Off"

✓

3.9.6. Set Auto Tilt of Standard Mode of Auto Tracking

Set auto tilt of Standard mode of auto tracking.

Request Key Style Value

Request

Command

String

SetTrackingStandardAutoTilt

SessionID

String

(Session ID in cookie.)

Params

AutoTilt

String

"On" / "Off"

3.9.7. Set Target Retention Time of Standard Mode of Auto Tracking

Set target retention time of Standard mode of auto tracking.

Request Key Style Value			HM650	HM650	HM640	HM630	HM620	HM610	HM600	HM590	HM580	HM570	HM560
Request
Command	String	SetTrackingStandardTargetRetentionTime	-	-	-	-	-	-	-	-	-	-	-
SessionID	String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	-	-	-
Params
TargetRetentionTime	Integer	5, 8, 10, 12, 15	-	-	-	-	-	-	-	-	-	-	-
Example
"Request": {"Command": "SetTrackingStandardTargetRetentionTime", "SessionID": "7425fcbc68ee4d15cd4c15acc4299a3", "Params": {"TargetRetentionTime": 10}}
Response Key Style Value			HM650	HM650	HM640	HM630	HM620	HM610	HM600	HM590	HM580	HM570	HM560
Response
Requested	String	SetTrackingStandardTargetRetentionTime	-	-	-	-	-	-	-	-	-	-	-
Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-	-
Example
"Response": {"Requested": "SetTrackingStandardTargetRetentionTime", "Result": "Success"}}

3.9.8. Set Figrue Size of Standard Mode of Auto Tracking

Set figure size of Standard mode of auto tracking.

Example Example ('FigureSize' is 'Custom')

{"Request": {"Request": {"Command": "SetTrackingStandardFigureSize","SessionID": "7425fbcb58ee4d15004c15acc4299a3","Params": {"Params": {"FigureSize": "Full"} "FigureSizeCustom": 80}} }

{"Command": "SetTrackingStandardFigureSize","SessionID": "7425fbcb58ee4d15004c15acc4299a3","FigureSize": "Custom".}

Response Key Style

Value

Response

Requested

String

SetTrackingStandardFigureSize

Result

String

(Result of command processing.)

Example

"Response": {"Requested":"SetTrackingStandardFigureSize","Result":"Success"}

3.9.9. Set Vertical Position of Standard Mode of Auto Tracking

Set vertical position of Standard mode of auto tracking.

Request Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Request
Command	String	SetTrackingStandardVerticalPosition	-	-	-	-	-	-	-	-	-	-	-	-	✓
SessionID	String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Params
VerticalPosition	Integer	-5 - 5	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Request": {"Command": "SetTrackingStandardVerticalPosition","SessionID": "7425fcbc68ee4d15cd4c15acc4299a3","Params": "/VerticalPosition": 0;};}
Response Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Response
Requested	String	SetTrackingStandardVerticalPosition	-	-	-	-	-	-	-	-	-	-	-	-	✓
Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Response": {"Requested": "SetTrackingStandardVerticalPosition","Result": "Success"}}

3.9.10. Set Horizontal Position of Standard Mode of Auto Tracking

Set horizontal position of Standard mode of auto tracking.

Request Key Style Value

HM650

HM640

HM630

HM620

HM610

HM600

HM590

HM580

HM570

HM560

Request

Command

String

SetTrackingStandardHorizontalPosition

SessionID

String

(Session ID in cookie.)

Params

HorizontalPosition

String

"Left" / "Center" / "Right"

Example

"Request": { "Command": "SetTrackingStandardHorizontalPosition", "SessionID": "7425fcbc58cc4d15cd4c15acc4289a3", "Params": { "HorizontalPosition": "Center" } } }

Response Key Style Value

HM650

HM640

HM630

HM620

HM610

HM600

HM590

HM580

HM570

HM560

Response

Requested

String

SetTrackingStandardHorizontalPosition

Result

String

(Result of command processing.)

Example

"Response": { "Requested": "SetTrackingStandardHorizontalPosition", "Result": "Success" } }

3.9.11. Set Tracking Start Position of Standard Mode of Auto Tracking

Set tracking start position of Standard mode of auto tracking.

Request Key Style Value

Request

Command

String

SetTrackingStandardStartPosition

SessionID

String

(Session ID in cookie.)

Params

StartPosition

String

"CurrentPosition" / "HomePosition" / "Preset1"

3.9.12 Get Auto Tracking Settings of Area Mode

Request all auto tracking settings of area mode.

Request Key Style

Value

H4650

H4660

H4650

H 4650

H4650

H465

Request

Command

String

GetTrackingArea

√

SessionID

String

(Session ID in cookie.)

Example

{

"Request": {

"Command": "GetTrackingArea",

"SessionID": "7425fbb58ee4d15dd4c1f5ace4299a3"

}

Response Key Style		Value	A16	A17	A18	A19	A20	A21	A22	A23	A24	A25
Response			-	-	-	-	-	-	-	-	-	-
Requested	String	GetTrackingArea	-	-	-	-	-	-	-	-	-	-
Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-
Data
TargetRetentionTime	Integer	5, 8, 10, 12, 15
StartingArea	String	"A1" / "A2" / "A3" / "A4"	-	-	-	-	-	-	-	-	-	-

Example

{

"Response": {

"Requested": "GetTrackingArea",

"Result": "Success".

"Data": {

"TargetRetentionTime": 10,

"StartingArea": "A1"

}

3.9.13 Execute Set/Delete Starting Area of Area Mode of Auto Tracking

Execute set/delete starting area of area mode of auto tracking.

Request Key Style Value

H4650

H47510

Command

String

ExecuteTrackingStartingArea

√

SessionID

String

{Session ID in cookie.}

√

Params

Command

String

"Set" / "Delete"

√

Area

String

"A1" / "A2" / "A3" / "A4"

√

Response Key Style Value
Response
Requested	String	ExecuteTrackingStartingArea
Result	String	[Result of command processing.]

3.9.14. Set Target Retention Time of Area Mode of Auto Tracking

Set target retention time of area mode of auto tracking.

Request Key Style Value			HM650	HM650	HM640	HM630	HM620	HM610	HM600	HM590	HM580	HM570	HM560
Request
Command	String	SetTrackingAreaTargetRetentionTime	-	-	-	-	-	-	-	-	-	-	-
SessionID	String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	-	-	-
Params
TargetRetentionTime	Integer	5, 8, 10, 12, 15	-	-	-	-	-	-	-	-	-	-	-
Example
"Request": { "Command": "SetTrackingAreaTargetRetentionTime", "SessionID": "7425fcbc68ee4d15cd4c15acc4299a3", "Params": { "TargetRetentionTime": 10 } } }
Response Key Style Value			HM650	HM650	HM640	HM630	HM620	HM610	HM600	HM590	HM580	HM570	HM560
Response
Requested	String	SetTrackingAreaTargetRetentionTime	-	-	-	-	-	-	-	-	-	-	-
Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-	-
Example
"Response": { "Requested": "SetTrackingAreaTargetRetentionTime", "Result": "Success" } }

3.9.15. Set Tracking Starting Area of Area Mode of Auto Tracking

Set tracking starting area of area mode of auto tracking.

Request Key Style Value

HM650

HM640

HM620

HM625x

HM630

LS300

PZ100

HC300

HC390

PZ400

PZZ200

PZ510

Request

Command

String

SetTrackingAreaStartingArea

✓

SessionID

String

(Session ID in cookie.)

✓

Params

StartingArea

String

"A1" / "A2" / "A3" / "A4"

✓

Example

"Request": { "Command": "SetTrackingAreaStartingArea", "SessionID": "7425fcbc58ee4d15dd4c15acc4299a3", "Params": { "StartingArea": "A1" } } }

Response Key Style Value

HM650

HM640

HM620

HM625x

HM630

LS300

PZ100

HC300

HC390

PZ400

PZZ200

PZ510

Response

Requested

String

SetTrackingAreaStartingArea

✓

Result

String

(Result of command processing.)

✓

Example

"Response": { "Requested": "SetTrackingAreaStartingArea", "Result": "Success" } } }

3.9.16 Get Auto Tracking Settings of Stage Mode

Request all auto tracking settings of stage mode.

Request Key Style

Value

H4650

H4660

H4650

H 4650

H4650

H465

Request

Command

String

GetTrackingStage

√

SessionID

String

(Session ID in cookie.)

Example

{

"Request": {

"Command": "GetTrackingStage",

"SessionID": "7425fbb68ee4d15dd4c1f5ace4209a3"

}

Response Key Style		Value	HH6	HH6	HH6	HH6	HH6	HH6	HH6	HH6	HH6	HH6	HH6	HH6	HH6	HH6
Requested		String	GetTrackingStage	-	-	-	-	-	-	-	-	-	-	-	-	-
Result		String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-	-	-	-
Data
	TargetRetentionTime	Integer	5, 8, 10, 12, 15
	HorizontalPosition	String	"Left" / "Center" / "Right"	-	-	-	-	-	-	-	-	-	-	-	-	-

Example

{

"Response": {

"Requested": "GetTrackingStage",

"Result": "Success".

"Data": {

"TargetRetentionTime": 10,

"HorizontalPosition": "Center"

}

3.9.17 Execute Set/Delete Position of Stage Mode of Auto Tracking

Execute set/delete position of stage mode of auto tracking.

Request Key Style Value

H4650

H47510

Request

Command

String

ExecuteTrackingStagePosition

✓

SessionID

String

{Session ID in cookie.}

✓

Params

Command

String

"Set" / "Delete"

✓

Position

String

"Left" / "Right" / "Start"

✓

Response

Value

HM650

HM600

HM625

LS200

PZ100

HC900

HC500

PZ400

TZ200

PZ510

Requested

String

ExecuteTrackingStagePosition

Result

String

[Result of command processing.]

3.9.18. Set Target Retention Time of Stage Mode of Auto Tracking

Set target retention time of stage mode of auto tracking.

Request Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Request
Command	String	SetTrackingStageTargetRetentionTime	-	-	-	-	-	-	-	-	-	-	-	-	✓
SessionID	String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Params
TargetRetentionTime	Integer	5, 8, 10, 12, 15	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Request": { "Command": "SetTrackingStageTargetRetentionTime", "SessionID": "7425fcbc68ee4d15cd4c15acc4299a3", "Params": { "TargetRetentionTime": 10 } } }
Response Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Response
Requested	String	SetTrackingStageTargetRetentionTime	-	-	-	-	-	-	-	-	-	-	-	-	✓
Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Response": { "Requested": "SetTrackingStageTargetRetentionTime", "Result": "Success" } }

3.9.19. Set Horizontal Position of Stage Mode of Auto Tracking

Set horizontal position of stage mode of auto tracking.

Request Key Style Value

Request

Command

String

SetTrackingStageHorizontalPosition

✓

SessionID

String

(Session ID in cookie.)

✓

Params

HorizontalPosition

String

"Left" / "Center" / "Right"

✓

Example

"Request": { "Command": "SetTrackingStageHorizontalPosition", "SessionID": "7425fcbc58cc4d15cd4c15acc4299a3", "Params": { "HorizontalPosition": "Center" } } }

Response Key Style Value

Response

Requested

String

SetTrackingStageHorizontalPosition

✓

Result

String

(Result of command processing.)

✓

Example

"Response": { "Requested": "SetTrackingStageHorizontalPosition", "Result": "Success" } } }

3.9.20 Get Auto Tracking Settings of Wide Area Mode

Request all auto tracking settings of wide area mode.

Request Key Style

Value

H0850

H0860

H0220

H0255

H0280

L5300

Z7100

HC900

HC960

P4700

P2200

P5700

Request

Command

String

GetTrackingWideArea

SessionID

String

{Session ID in cookie.}

Example

"Request": {

"Command": "GetTrackingWideArea",

"SessionID": "7425fbcb58ee4d15dd4c1f5ace4299a3"

}

Response Key Style Value

Requested	String	GetTrackingWideArea	-	-	-	-	-	-	-	-	-	-	-	✓
Result	String	{Result of command processing.}	-	-	-	-	-	-	-	-	-	-	-	✓
Data
AutoZoom	String	"On" / "Off"	-	-	-	-	-	-	-	-	-	-	-	✓
AutoTilt	String	"On" / "Off"	-	-	-	-	-	-	-	-	-	-	-	✓
TargetRetentionTime	Integer	5.8, 10, 12, 15	-	-	-	-	-	-	-	-	-	-	-	✓
FigureSize	String	"Full" / "Upper" / "Close" / "Custom"	-	-	-	-	-	-	-	-	-	-	-	✓
FigureSizeCustom	Integer	80-290 (This parameter is valid only when 'FigureSize' is 'Custom'.)	-	-	-	-	-	-	+	-	-	-	-	✓
VerticalPosition	Integer	-5 - 5	-	-	-	-	-	-	-	-	-	-	-	✓
HorizontalPosition	String	"Left" / "Center" / "Right"	-	-	-	-	-	-	-	-	-	-	-	✓
StartPosition	String	"CurrentPosition" / "HomePosition" / "W1" / "W2" / "Preset1"	-	-	-	-	-	-	-	-	-	-	-	✓

Example Example ('FigureSize' is 'Custom')

{

"Response": { "Response": {

"Requested": "GetTrackingWideArea", "Result": "Success", "Result": "Success", "Data": { "Data": {

"AutoZoom": "On", "AutoZoom": "On", "AutoTilt": "On", "AutoTilt": "On", "TargetRetentionTime": 10, "FigureSize": "Full", "VerticalPosition": 0, "FigureSizeCustom": 80, "HorizontalPosition": "Center", "VerticalPosition": 0, "StartPosition": "CurrentPosition"

}

"Requested": "GoITrackingWideArea",

"TargetRetentionTime": 10,

"FigureSize": "Custom",

"HorizontalPosition": "Center",

"StartPosition": "CurrentPosition" }

3.9.21 Execute Set/Delete Position of Wide Area Mode of Auto Tracking

Execute set/delete position of wide area mode of auto tracking.

Request Key Style Value

H4650

H47510

Request

Command

String

ExecuteTrackingWideAreaPosition

✓

SessionID

String

{Session ID in cookie.}

✓

Params

Command

String

"Set" : "Delete"

✓

Position

String

"W1" : "W2"

✓

Response Key Style Value
Response
Requested	String	ExecuteTrackingWideAreaPosition
Result	String	[Result of command processing.]

3.9.22. Set Auto Zoom of Wide Area Mode of Auto Tracking

Set auto zoom of wide area mode of auto tracking.

Request Key Style Value

Request

Command

String

SetTrackingWideAreaAutoZoom

✓

SessionID

String

(Session ID in cookie.)

✓

Params

AutoZoom

String

"On" / "Off"

✓

3.9.23. Set Auto Tilt of Wide Area Mode of Auto Tracking

Set auto tilt of wide area mode of auto tracking.

Request Key Style Value

Request

Command

String

SetTrackingWideAreaAutoTilt

SessionID

String

(Session ID in cookie.)

Params

AutoTilt

String

"On" / "Off"

3.9.24. Set Target Retention Time of Wide Area Mode of Auto Tracking

Set target retention time of wide area mode of auto tracking.

Request Key Style Value			HM650	HM650	HM640	HM630	HM620	HM610	HM600	HM590	HM580	HM570	HM560
Request
Command	String	SetTrackingWideAreaTargetRetentionTime	-	-	-	-	-	-	-	-	-	-	-
SessionID	String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	-	-	-
Params
TargetRetentionTime	Integer	5, 8, 10, 12, 15	-	-	-	-	-	-	-	-	-	-	-

3.9.25. Set Figrue Size of Wide Area Mode of Auto Tracking

Set figure size of wide area mode of auto tracking.

Request Key Style
Value

Request

Command

String

SetTrackingWideAreaFigureSize

SessionID

String

(Session ID in cookie.)

Params

FigureSize

String

"Full" / "Upper" / "Close" / "Custom"

FigureSizeCustom

Integer

80-290 (This parameter is valid only when 'FigureSize' is 'Custom').

Example Example ('FigureSize' is 'Custom')

{"Request": {"Request": {"Command": "SetTrackingWideAreaFigureSize", "SessionID": "7425fcbc58ee4d15dd4c1f5ace4299a3", "Params": {"Params": {"FigureSize": "Full"} "FigureSizeCustom": 80}} }}

{"Command": "SetTrackingWideAreaFigureSize", "SessionID": "7425fcbc58ee4d15dd4c1f5ace4299a3", "FigureSize": "Custom",}}

Response Key Style
Value

Response

Requested

String

SetTrackingWideAreaFigureSize

√

Result

String

(Result of command processing.)

√

Example

"Response": { "Requested": "SetTrackingWideAreaFigureSize", "Result": "Success"}

3.9.26. Set Vertical Position of Wide Area Mode of Auto Tracking

Set vertical position of wide area mode of auto tracking.

Request Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Request
Command	String	SetTrackingWideAreaVerticalPosition	-	-	-	-	-	-	-	-	-	-	-	-	✓
SessionID	String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Params
VerticalPosition	Integer	-5 - 5	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Request": {"Command": "SetTrackingWideAreaVerticalPosition", "SessionID": "7425f8cb68ee4d15cd4c15acc4299a3", "Params": "/VerticalPosition": 0 / }
Response Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Response
Requested	String	SetTrackingWideAreaVerticalPosition	-	-	-	-	-	-	-	-	-	-	-	-	✓
Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Response": {"Requested": "SetTrackingWideAreaVerticalPosition", "Result": "Success" / }

3.9.27. Set Horizontal Position of Wide Area Mode of Auto Tracking

Set horizontal position of wide area mode of auto tracking.

Request Key Style Value

HM650

HM640

HM630

HM620

HM610

HM600

HM590

HM580

HM570

HM560

Request

Command

String

SetTrackingWideAreaHorizontalPosition

SessionID

String

(Session ID in cookie.)

Params

HorizontalPosition

String

"Left" / "Center" / "Right"

Example

"Request": { "Command": "SetTrackingWideAreaHorizontalPosition", "SessionID": "7425fbbcb58cc4d15cd4c15acc4289a3", "Params": { "HorizontalPosition": "Center" } } }

Response Key Style Value

HM650

HM640

HM630

HM620

HM610

HM600

HM590

HM580

HM570

HM560

Response

Requested

String

SetTrackingWideAreaHorizontalPosition

Result

String

(Result of command processing.)

Example

"Response": { "Requested": "SetTrackingWideAreaHorizontalPosition", "Result": "Success" } }

3.9.28. Set Tracking Start Position of Wide Area Mode of Auto Tracking

Set tracking start position of wide area mode of auto tracking.

Request Key Style Value

HM650

HM640

HM630

HM620

HM610

HM600

HM590

HM580

HM570

HM560

Request

Command

String

SetTrackingWideAreaStartPosition

SessionID

String

(Session ID in cookie.)

Params

StartPosition

String

"CurrentPosition" / "HomePosition" / "W1" / "W2" / "Preset1"

3.9.29 Get Auto Tracking Settings of Fine Adjustment Mode

Request all auto tracking settings of Fine Adjustment mode.

Request Key Style Value

HM650

HM660

HM6x0

HM25x

HM280

LS300

PZ100

HC900

PC900

PZ400

PZ200

PZ510

Request

Command

String

GetTrackingFineAdjustment

SessionID

String

{Session ID in cookie.}

Example

{

"Request": {

"Command": "GetTrackingFineAdjustment",

"SessionID": "7425fbb68ee4d15dd4c1f5ace4209a3"

}

Response Key Style		Value	H16	H16	H16	H16	H16	H16	L53	F21	HC9	HC9	P74	F22	F25
Response
	Requested	String	GetTrackingFineAdjustment	-	-	-	-	-	-	-	-	-	-	-	-
	Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-	-	-
	Data
	AutoZoom	String	"On" / "Off"	-	-	-	-	-	-	-	-	-	-	-	-
	AutoTilt	String	"On" / "Off"	-	-	-	-	-	-	-	-	-	-	-	-
	DurationTime	Integer	1-6	-	-	-	-	-	-	-	-	-	-	-	-
	FigureSize	String	"Full" / "Upper" / "Close" / "Custom"	-	-	-	-	-	-	-	-	-	-	-	-
	FigureSizeCustom	Integer	80-290 (This parameter is valid only when 'FigureSize' is 'Custom').	-	-	-	-	-	-	-	-	-	-	-	-
	VerticalPosition	Integer	-5 - 5	-	-	-	-	-	-	-	-	-	-	-	-
	HorizontalPosition	String	"Left" / "Center" / "Right"	-	-	-	-	-	-	-	-	-	-	-	-

Example Example ('FigureSize' is 'Custom')

{"Response": {"Response": {"Requested": "GetTrackingFineAdjustment", "Result": "Success", "Result": "Success", "Data": {"Data": {"AutoZoom": "On", "AutoZoom": "On", "AutoTill": "On", "AutoTill": "On", "DurationTime": 3, "DurationTime": 3, "FigureSize": "Center", "VerticalPosition": 0, "FigureSizeCustom": 80, "HorizontalPosition": "Center"} }}

3.9.30. Set Auto Zoom of Fine Adjustment Mode of Auto Tracking

Set auto zoom of fine adjustment mode of auto tracking.

Request Key Style Value

Request

Command

String

SetTrackingFineAdjustmentAutoZoom

✓

SessionID

String

(Session ID in cookie.)

✓

Params

AutoZoom

String

"On" / "Off"

✓

3.9.31. Set Auto Tilt of Fine Adjustment Mode of Auto Tracking

Set auto tilt of wide area mode of auto tracking.

Request Key Style Value

HM650

HM640

HM620

HM625x

HM630

LS300

PZ100

HC300

HC390

PZ400

FZZ200

FZ510

Request

Command

String

SetTrackingFineAdjustmentAutoTilt

✓

SessionID

String

(Session ID in cookie.)

✓

Params

AutoTilt

String

"On" / "Off"

✓

Example

"Request": { "Command": "SetTrackingFineAdjustmentAutoTilt", "SessionID": "7425f8cb686e4d15cd4c15acc4299a3", "Params": { "AutoTilt": "On" } } }

Response Key Style Value

HM650

HM640

HM620

HM625x

HM630

LS300

PZ100

HC300

HC390

PZ400

FZZ200

FZ510

Response

Requested

String

SetTrackingFineAdjustmentAutoTilt

✓

Result

String

(Result of command processing.)

✓

Example

"Response": { "Requested": "SetTrackingFineAdjustmentAutoTilt", "Result": "Success" } }

3.9.32. Set Tracking Duration Time of Fine Adjustment Mode of Auto Tracking

Set tracking duration time of Fine Adjustment mode of auto tracking.

Request Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Request
Command	String	SetTrackingFineAdjustmentDurationTime	-	-	-	-	-	-	-	-	-	-	-	-	✓
SessionID	String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Params
DurationTime	Integer	1-6	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Request": {"Command": "SetTrackingFineAdjustmentDurationTime","SessionID": "7425fbb68ee4d15cd4c15acc4299a3","Params": {"DurationTime": 3/;};}
Response Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Response
Requested	String	SetTrackingFineAdjustmentDurationTime	-	-	-	-	-	-	-	-	-	-	-	-	✓
Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Response": {"Requested": "SetTrackingFineAdjustmentDurationTime","Result": "Success"}}

3.9.33. Set Fiqrue Size of Fine Adjustment Mode of Auto Tracking

Set figure size of fine adjustment mode of auto tracking.

Example Example ('FigureSize' is 'Custom')

{"Request": {"Request": {"Command": "SetTrackingFineAdjustmentFigureSize", "SessionID": "7425fbcc58ee4d15004c1f5acc4299a3", "Params": {"Params": {"FigureSize": "Full"} "FigureSizeCustom": 80}} }

{"Command": "SetTrackingFineAdjustmentFigureSize", "SessionID": "7425fbcc58ee4d15004c1f5acc4299a3", "FigureSize": "Custom".}

Response Key Style

Value

H4M

Response

Requested

String

SetTrackingFineAdjustmentFigureSize

√

Result

String

(Result of command processing.)

√

Example

"Response": {"Requested":"SetTrackingFineAdjustmentFigureSize","Result":"Success"}

3.9.34. Set Vertical Position of Fine Adjustment Mode of Auto Tracking

Set vertical position of fine adjustment mode of auto tracking.

Request Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Request
Command	String	SetTrackingFineAdjustmentVerticalPosition	-	-	-	-	-	-	-	-	-	-	-	-	✓
SessionID	String	(Session ID in cookie.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Params
VerticalPosition	Integer	-5 - 5	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Request": {"Command": "SetTrackingFineAdjustmentVerticalPosition", "SessionID": "7425fcbc68ee4d15cd4c15acc4299a3", "Params": "/VerticalPosition": 0 / }
Response Key Style Value			HM650	HM650	HM640	HM620	HM625x	HM630	LS300	PZ100	HC300	HC390	PZ400	PZZ200	PZ510
Response
Requested	String	SetTrackingFineAdjustmentVerticalPosition	-	-	-	-	-	-	-	-	-	-	-	-	✓
Result	String	(Result of command processing.)	-	-	-	-	-	-	-	-	-	-	-	-	✓
Example
"Response": {"Requested": "SetTrackingFineAdjustmentVerticalPosition", "Result": "Success" /}

3.9.35. Set Horizontal Position of Fine Adjustment Mode of Auto Tracking

Set horizontal position of fine adjustment mode of auto tracking.

Request Key Style Value

HM650

HM640

HM630

HM620

HM610

HM600

HM590

HM580

HM570

HM560

Request

Command

String

SetTrackingFineAdjustmentHorizontalPosition

SessionID

String

(Session ID in cookie.)

Params

HorizontalPosition

String

"Left" / "Center" / "Right"

Example

"Request": { "Command": "SetTrackingFineAdjustmentHorizontalPosition", "SessionID": "7425fbbcb58cc4d15cd4c15acc4289a3", "Params": { "HorizontalPosition": "Center", } } }

Response Key Style Value

HM650

HM640

HM630

HM620

HM610

HM600

HM590

HM580

HM570

HM560

Response

Requested

String

SetTrackingFineAdjustmentHorizontalPosition

Result

String

(Result of command processing.)

Example

"Response": { "Requested": "SetTrackingFineAdjustmentHorizontalPosition", "Result": "Success" } } }

3.9.36 Get All Detected Objects

Request all detected objects.

Request Key Style Value

A4650

A4660

A4680

A4620

A463x

A4630

LS300

PZ100

HC900

HC360

PZ400

PZ200

PZ510

Command

String

GetTrackingDetectedObjects

SessionID

String

(Session ID in cookie.)

Response Key Style Value

Requested

String

GetTrackingDetectedObjects

✓

Result

String

[Result of command processing.]

✓

Data

ScreenWidth

Integer

Screen width (resolution width)

✓

ScreenHeight

Integer

Screen height (resolution height)

✓

Objects

Array

The size of the array depends on the number of objects detected.

✓

String

Unique ID used to specify in "SetTrackingTarget". The ID must be valid at least until the next "GetTrackingDetectedObjects" request within the same "SessionID".

✓

Integer

X coordinate of the upper left of the detected object.

✓

Integer

Y coordinate of the upper left of the detected object.

✓

Width

Integer

Detected object width.

✓

Height

Integer

Detected object height.

✓

TargetObjectID

String

ID of the current tracking target. If there is no tracking target, a zero-length string ("").

✓

Example

{
    "Response": {
    "Requested": "GetTrackingDetectedObjects",
    "Result": "Success",
    "Data": {
    "ScreenWidth": 1320,
    "ScreenHeight": 1080,
    "Objects": [
    {"D": "abc", "X": 100, "Y": 150, "Width": 200, "Height": 600},
    {"D": "def", "X": 700, "Y": 350, "Width": 250, "Height": 700},
    {"D": "gh", "X": 1300, "Y": 200, "Width": 400, "Height": 500}
    ],
    "TargetObjectID": "abc"
    }
}

ScreenWidth X Y Height Width ScreenHeight

3.9.37. Set Tracking Target

Set the tracking target to the specified object ID.

Request Key Style Value

Request

Command

String

SetTrackingTarget

✓

SessionID

String

(Session ID in cookie.)

✓

Params

String

Object ID obtained by "GetTrackingDetectedObjects".

✓

Example{"Request": {"Command": "SetTrackingTarget","SessionID": "74250cb686e4d15dd4c15ape4299a3","Params": {"ID": "abc"/}}

Response Key Style Value

Response

Requested

String

SetTrackingTarget

✓

Result

String

(Result of command processing.) *Command parsed result

✓

Data

Result

String

(Command execution result)

✓

"Succeeded": Successfully set tracking target.

✓

"Lost": Lost the object with the specified ID.

✓

"InvalidID": Specified ID is invalid.

✓

"InvalidOperation": Can't set tracking target in current mode.

✓

Example{"Response": {"Requested": "SetTrackingTarget","Result": "Success","Data": {"Result": "Succeeded"}}

KY-PZ100BE - Surveillance Camera JVC - Free user manual and instructions

Frequently Asked Questions - KY-PZ100BE JVC

User questions about KY-PZ100BE JVC

USER MANUAL KY-PZ100BE JVC

Contents

1. Outline

2. Interface

3. Command

3.2. System Command

3.4. PTZ Camera Support Command

1.1. Specification

2. Interface

2.1. Authentication

Example

Example

2.2. Request form

Example

2.3. Response form

3. Command

3.1. Streaming Setting Command

3.1.1. Get streaming settings

3.1.2. Set streaming resolution

3.1.4. Set streaming bitrate

3.1.5. Available streaming resolution settings

3.1.6. Available streaming framerate settings

3.1.7. Available streaming bitrate settings

3.1.8. Get current streaming server number

3.1.9. Set current streaming server number

3.1.10. Get streaming server settings

3.1.11. Set streaming server settings(UDP)

3.1.12. Set streaming server settings(TCP)

3.1.13. Set streaming server settings(RTSP/RTP)

3.1.14. Set streaming server settings(ZIXI)

3.1.15. Set streaming server settings(RTMP)

3.1.16. Set streaming server settings(RTMPS)

3.1.17. Set streaming server settings(RTP)

3.1.18. Set streaming server settings(SRT)

3.1.19. Set Streaming Encode Protocol

3.1.20. Set Streaming | Key Frame Interval

3.1.21. Get Video Settings

3.1.22. Set Video HDMI/SDI Output

3.1.23. Set Video Format

3.1.24. Set Video Encode Level

3.1.26. Set Network Multicast Settings

3.1.27. Set NDI Settings

3.1.28. Set MPEG2-TS Settings

3.2. System Command

3.2.1. Get System Information

3.2.2. Session renewal

3.2.4. Set preset zoom position

3.2.5. Set tally lamp priority

3.2.6. Get NTP Status

3.2.7. Set NTP Server

3.2.8. Set NTP Settings

3.2.9. Get NTP Settings

3.3. Camera Control Command

3.3.1. Get camera status

3.3.2. Recording

3.3.3. Set zoom position ( obey preset zoom settings of camera )

3.3.4. Live streaming

3.3.5. Tally lamp control

3.3.6. Set Web Button Event

3.3.7. Set Web Slider Event

3.3.8. Set Web XYField Event

3.3.9. Get GPS Information

3.3.10. Seesaw switch operation

3.4.1. Set Pan Tilt Control

Example

3.4.2. Joystick Operation

3.4.3. Zoom switch operation

3.4.4. Set Pan / Tilt / Zoom preset

3.4.5. Get camera status (for remote controller)

3.4.6. Get Pan & Tilt Positions

3.5. How to acquire JPEG data

3.5.1. JPEG encode control

3.5.2. Set JPEG encode size

3.5.3. Acquire JPEG data

3.6. How to use Interruptible Feedback Function

3.6.1. Get interruptible feedback settings

3.6.2. Set interruptible feedback settings