PLI-3410 - Access Point LEVELONE - Free user manual and instructions
Find the device manual for free PLI-3410 LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | PLI-3410 |
| Brand | LevelOne |
| Wireless Standard | IEEE 802.11n (up to 300 Mbps) |
| Frequency Band | 2.4 GHz |
| Ethernet Ports | 1 x 10/100 Mbps LAN (PoE PD) |
| Power over Ethernet | IEEE 802.3af PoE |
| Power Supply | 12V DC 1A (adapter included) |
| Dimensions (W x D x H) | 160 x 120 x 30 mm |
| Weight | 200 g |
| Antenna | 2 x 5 dBi detachable |
| Security | WEP, WPA/WPA2-PSK, WPA2-Enterprise, MAC address filtering |
| Management | Web interface, SNMP v1/v2c |
| Operating Modes | Access Point, WDS, Repeater, Client |
| Mounting | Desktop or wall mount (bracket included) |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC |
| Maintenance | Keep clean with a dry cloth; avoid liquids. |
| Spare Parts | Power adapter and antennas are replaceable; contact support. |
| Repairability | No user-serviceable parts; refer to qualified technician. |
Frequently Asked Questions - PLI-3410 LEVELONE
How do I reset the LevelOne PLI-3410 to factory defaults?
Press and hold the Reset button on the device for about 10 seconds until the LED flashes. Release the button; the access point will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.100. The default username is admin and password is admin (or blank). Check the sticker on the device.
How can I secure my wireless network?
Access the web interface, go to Wireless Security, and select WPA2-PSK with AES encryption. Set a strong password of at least 8 characters.
Does the PLI-3410 support Power over Ethernet (PoE)?
Yes, it supports IEEE 802.3af PoE. Connect a PoE switch or injector to the LAN port for both data and power.
What are the supported wireless modes?
The device can operate as Access Point, WDS (Wireless Distribution System), Repeater, or Client. Configure via the web interface.
How far does the wireless signal reach?
In open space, range is up to 100 meters (300 feet) indoors, depending on obstacles and interference. Use external antennas for better coverage.
Can I connect multiple PLI-3410 devices wirelessly?
Yes, using WDS mode you can bridge multiple access points together. Ensure they use the same SSID, channel, and encryption.
What is the maximum number of connected clients?
Typically, the PLI-3410 can handle up to 30-50 simultaneous clients, depending on network traffic.
How do I update the firmware?
Download the latest firmware from LevelOne's support website. In the web interface, go to System Tools > Firmware Upgrade and upload the file. Do not power off during update.
The device is acting as a DHCP server; how do I disable it?
In the web interface, navigate to LAN Settings and uncheck DHCP Server. Save and reboot. Ensure you have another DHCP server on your network.
User questions about PLI-3410 LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual PLI-3410 - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLI-3410 by LEVELONE.