WAP-8121 - Access Point LEVELONE - Free user manual and instructions
Find the device manual for free WAP-8121 LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | LevelOne |
| Model | WAP-8121 |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Antenna | 2 x Internal Omni-directional |
| MIMO | 2x2 |
| Ethernet Port | 1 x 10/100/1000 Mbps RJ-45 |
| Power Supply | PoE IEEE 802.3af or DC 12V 1A |
| Power Consumption | ≤ 8W |
| Dimensions (W x D x H) | 160 x 120 x 30 mm |
| Weight | 300 g |
| Mounting | Wall / Ceiling mountable |
| Security | WEP, WPA/WPA2-PSK, WPA/WPA2-Enterprise, MAC Filter |
| Multiple SSIDs | Up to 8 |
| VLAN Support | 802.1Q VLAN tagging |
| Management | Web interface, SNMP, Telnet |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Certifications | CE, FCC |
| Package Contents | Access Point, Power Adapter, Mounting Kit, Quick Start Guide |
Frequently Asked Questions - WAP-8121 LEVELONE
How do I reset the WAP-8121 to factory defaults?
Press and hold the reset button on the device for 5-10 seconds until the LED blinks. The device will reboot with factory settings.
What is the default IP address and login credentials?
Default IP is 192.168.1.1, username admin, password admin. Access via web browser.
Can I power the WAP-8121 with PoE?
Yes, it supports IEEE 802.3af PoE. You can use a PoE switch or injector. Requires a PoE source.
How many clients can connect simultaneously?
Typically up to 32 clients per radio. Real performance depends on network conditions.
Does it support WPA3?
No, it supports WEP, WPA/WPA2. It does not support WPA3.
How do I configure multiple SSIDs?
Go to Wireless settings, enable Multiple SSID, set up to 8 SSIDs with separate security and VLAN settings.
Can I mount it on a wall?
Yes, it comes with a mounting kit for wall or ceiling installation. Use the provided brackets.
What is the maximum range?
Indoor range is about 100 meters in open space. Actual range varies due to obstacles and interference.
How to update firmware?
Download the latest firmware from LevelOne website. Go to Administration > Firmware Upgrade, upload the file, and wait for reboot.
Does it support VLAN?
Yes, it supports IEEE 802.1Q VLAN tagging per SSID for network segmentation.
User questions about WAP-8121 LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WAP-8121 - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAP-8121 by LEVELONE.