SILVERCREST SDI 3500 A1 - Frying Pan

SDI 3500 A1 - Frying Pan SILVERCREST - Free user manual and instructions

Find the device manual for free SDI 3500 A1 SILVERCREST in PDF.

📄 64 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SILVERCREST SDI 3500 A1 - page 8
View the manual : Deutsch DE Ελληνικά EL English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Frying Pan
Model SDI 3500 A1
Brand SilverCrest
Diameter 28 cm
Depth 5 cm
Weight 0.8 kg
Material Aluminum with non-stick coating
Handle Material Heat-resistant plastic
Suitable for Induction Yes
Suitable for Gas Yes
Suitable for Electric Yes
Oven Safe Up to 180°C
Dishwasher Safe No, hand wash recommended
Main Features Non-stick coating, ergonomic handle, induction ready
Care Instructions Hand wash with mild detergent; avoid metal utensils
Safety Notes Do not leave unattended; keep handle cool; use with caution
Spare Parts Availability Handle available as spare part
Repair Service Contact SilverCrest customer service

Frequently Asked Questions - SDI 3500 A1 SILVERCREST

Is the SilverCrest SDI 3500 A1 pan suitable for induction cooktops?
Yes, the pan is compatible with induction cooktops due to its magnetic base.
Can I use metal utensils with this pan?
No, metal utensils can scratch the non-stick coating. Use wooden or silicone utensils instead.
Is the pan oven safe?
Yes, it is oven safe up to 180°C. However, remove the handle if it is plastic and not oven-safe.
How should I clean the SDI 3500 A1 pan?
Hand wash with warm water, mild detergent, and a soft sponge. Avoid abrasive cleaners and dishwasher.
Can I use the pan on a gas stove?
Yes, the pan is suitable for gas cooktops.
What is the diameter of the pan?
The pan has a diameter of 28 cm.
Does the pan have a non-stick coating?
Yes, it features a high-quality non-stick coating for easy food release and cleaning.
How do I tighten the handle if it becomes loose?
Use a screwdriver to tighten the screw on the underside of the handle. Do not overtighten.
Is the pan dishwasher safe?
No, the pan is not dishwasher safe. Hand washing is recommended to preserve the non-stick coating.
Where can I get spare parts for this pan?
Spare parts like handles are available through SilverCrest customer service or authorized retailers.

User questions about SDI 3500 A1 SILVERCREST

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Frying Pan in PDF format for free! Find your manual SDI 3500 A1 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDI 3500 A1 by SILVERCREST.

USER MANUAL SDI 3500 A1 SILVERCREST

DOUBLE INDUCTION HOB

Operating instructions

GR CY

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

GR CY

GB/IE/NI/CY Operating instructions Page 1

Disposal of packaging materials 3

Description of appliance/accessories 4

Technical data 4

Safety guidelines 5

Function 8

Suitable cookware 8

Energy-efficient cooking....8

Setting up 9

Electrical connection....9

Operation 10

The hobs 10

Operation 10

Safety cut-off 12

Timer 12

Child safety lock 13

Cleaning 14

Storage 14

Troubleshooting 15

Disposal of the appliance .... 16

Notes on the EC Declaration of Conformity 16

Information for this domestic electric hob 17

Kompernass Handels GmbH warranty 18

Service....19

Importer....19

Introduction

Congratulations on the purchase of your new appliance!

You have decided in favour of a modern, high-quality product. These operating instructions are part of this product. They contain important information on safety, usage and disposal. Before using the product, familiarise yourself with all handling and safety guidelines. This appliance may only be used as described and for the purposes indicated. Please also pass these operating instructions on to any future owner(s).

Intended use

This appliance is intended exclusively for heating up foodstuffs and keeping them warm. This appliance is intended solely for use in private homes. Do not use it for commercial purposes.

Use the appliance only in dry places, and never use it outdoors.

WARNING

Danger if not used for the intended purpose!

The appliance may pose a hazard if it is not used for its intended purpose and/or if it is used for any other purpose.

▶ Use the appliance only for its intended purpose.
▶ Observe the procedures described in these operating instructions.

NOTE

▶ Failure to use the appliance for its intended purpose and/or for an alternative purpose can be dangerous. Use the appliance only for its intended purpose. Observe the procedures described in these operating instructions. Claims of any kind for damage resulting from misuse, incompetent repairs, unauthorised modification or the use of unauthorised spare parts will not be accepted. The risk shall be borne solely by the user.

Package contents

The appliance is supplied with the following components as standard:

  • Double Induction Hob
  • Operating instructions

1) Remove all parts of the appliance and the operating instructions from the box.
2) Remove all packaging material.

NOTE

▶ Check the package for completeness and for signs of visible damage.
▶ If the consignment is incomplete or damaged due to defective packaging or carriage, contact the Service hotline (see the chapter Service).

Disposal of packaging materials

The packaging protects the appliance from damage during carriage.

The packaging materials have been selected for their environmental friendliness and ease of disposal, and are therefore recyclable.

SILVERCREST SDI 3500 A1 - Disposal of packaging materials - 1

Returning the packaging to the materials cycle conserves raw materials and reduces the amount of waste that is generated. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.

NOTE

If possible, preserve the appliance's original packaging during the warranty period so that, in the event of a warranty claim, you can repackage the appliance properly for return.

Description of appliance/accessories

Figure A:

① Left hob
② Right hob
③ Recessed handle
4 Control panel (for right hob)
⑤ Control panel (for left hob)
6 Recessed handle

Figure B: Control panel for left hob

7 TIME button
⑧ TEMP button
⑨ "-" button
10 Display
⑪ “+” button
12 POWER button
13 ON/OFF button (for both hobs)

Figure C: Control panel for right hob

14 TIME button
15 TEMP button
16 " -" button
⑰ Display
18 "+" button
19 POWER button

Technical data

Mains voltage 220 - 240 V~, 50/60 Hz
Rated power max. 2800 W
Protection classII□
Noise emission level <70 dB (A)

Safety guidelines

SILVERCREST SDI 3500 A1 - Safety guidelines - 1

RISK OF ELECTRIC SHOCK

  • Ensure that the power cable never becomes wet or damp when the appliance is in use. Route the cable so that it cannot be trapped or damaged in any way.
    ▶ After use, always disconnect the plug from the mains power socket.
    ▶ Just switching off the appliance is not sufficient, as the appliance is subject to mains voltage for as long as the plug is connected to the mains power socket.
    ▶ Protect the hob from damage: Do not load it unevenly and do not allow objects to fall onto it. Do not continue to use the appliance if either the hob or the housing is damaged. If this is the case, immediately remove the plug from the mains power socket and arrange for the appliance to be repaired.
    To prevent accidents, have defective plugs and/or power cables replaced immediately by a qualified specialist technician or our Customer Service department.
    ▶ If the surface of the hob is cracked, disconnect the plug from the mains power socket to avoid receiving an electric shock.
    Ensure that the appliance, the power cable and the power plug are never immersed in water or other fluids.

SILVERCREST SDI 3500 A1 - RISK OF ELECTRIC SHOCK - 1

⚠ WARNING! RISK OF INJURY!

- Do not touch the area where a hot cooking vessel has just been standing. Directly after cooking, this area can be very hot.

This appliance may be used by children aged eight years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge if they are being supervised or have been instructed with regard to the safe use of the appliance and have understood the potential risks.

The appliance must not be used as a plaything by children.

- Cleaning and user maintenance must not be performed by children unless they are older than eight years of age and are supervised.

▶ Children younger than eight years of age must be kept away from the appliance and the power cable.

▶ Do not heat sealed cans or other sealed containers.

SILVERCREST SDI 3500 A1 - ⚠ WARNING! RISK OF INJURY! - 1

Caution! Hot surface!

SILVERCREST SDI 3500 A1 - ⚠ WARNING! RISK OF INJURY! - 2

This symbol warns you not to touch the hob directly after use. Risk of burns!

⚠ WARNING! RISK OF FIRE!

▶ Overheated foodstuff s can start burning! Never leave the appliance unsupervised while it is in use.
▶ Additionally, never position the appliance below fl ammable objects, especially not below curtains.
▶ Never heat a securely closed container. Heat expansion can quickly cause an explosion.
▶ Never heat an empty container. This would overheat very quickly, leading to a risk of fire and serious damage to the hob.
- Do not place any metallic objects, such as kitchen utensils or cutlery, on the hob. They can become very hot in the induction fi eld.
▶ Be careful when heating small amounts of oil: do not use a high setting or temperature level. Otherwise, the oil can burn and catch fire!
▶ Never operate the appliance on a metal table or other metallic surface. This may heat up and thus cause a fire. Or the appliance could become irreparably damaged.
- Do not operate the appliance using an external time-switch or a separate remote control system.

⚠️To avoid hazards caused by electromagnetic fi elds:

- Maintain a minimum distance of 1 m from appliances that are sensitive to electromagnetic fi elds (e.g. screens, clocks, magnetic storage media, electronic devices, etc.).

▶ Medical devices, such as heart pacemakers, hearing aids and other appliances, may need to be kept at a greater distance. If in doubt, consult the manufacturer of the medical device!

Function

Whilst standard hotplates heat up themselves, in an induction hotplate the heat is created in the base of the cookware. The hob itself does not heat up; it becomes hot when food is heated upon it in a pan and the heat from the pan reflects onto the hob. (Reverse heating).

This is caused by an energy fi eld that generates heat only in magnetically conductive materials, for example, pans made of iron. In other materials, such as porcelain, glass or ceramic, the energy fi eld cannot generate any heating effect.

Suitable cookware

Only use cookware that is suitable for induction hobs:

Suitable cookware consists of pots and pans with a base made of steel or cast iron. You can identify these either by means of the markings on the pan or by ascertaining whether a magnet clings to the base of the pan.

■ Unsuitable cookware is made from any kind of metal that is non-magnetic, such as aluminium, copper and stainless steel, as well as non-metallic vessels made of porcelain, glass, ceramic, plastics, etc.

If unsuitable cookware is placed on the hobs ①/②, "EO" appears in the relevant display ⑩/⑰.

- Thin pan bases are better suited to induction cooking than thick sandwich bases. The very short response times to setting modifications (short preheating period, rapid and controllable browning) are not possible when pans with thick bases are used.

Only use cookware that is suitable for the size of the hob ①/②. This the only way to ensure that the induction hob functions perfectly. The base of the pan may not be uneven, rather, it must sit fl at.

The diameter may not be less than 16 cm to ensure that the energy fi eld has an effect. Do not use pans with a diameter in excess of 26 cm.

Energy-effi cient cooking

In order to use the energy, which is needed for heating food, in the most environmentally friendly way, we recommend using a pan with a wide diameter and one that is not very deep instead of a deep pan with a small diameter. The food is heated more quickly since the surface area of the pan being heated is greater with a large diameter. Never use pans with a diameter greater than 26 cm.

■ If you want to heat food quickly, place a lid on the pan. This ensures that less heat escapes.

Setting up

The appliance requires unrestricted ventilation to prevent overheating. Therefore, set up the appliance so that ...

  • there is an all-round clearance of at least 10 cm, e.g. to the nearest wall,
  • at least 60 cm clearance above, e.g. to a suspended wall cabinet.

■ When moving the appliance, hold it by the recessed handles ③/⑥.

For cooling purposes, the appliance draws in air through openings on the base. Do not place it on textiles or fl eecy surfaces, such as tablecloths. Operate it only on smooth surfaces.
■ Do not place it adjacent to curtains or other textiles which, due to the airflow, could cling to the appliance.
■ Do not place it on surfaces which may contain ferric or steel materials. These may become very hot.
- Maintain a minimum distance of 1 m from appliances that are sensitive to electromagnetic fi elds (e.g. screens, clocks, magnetic storage media, electronic devices, etc.).
■ Wipe the hobs with a damp cloth to remove soiling sustained during transportation. Wipe

Electrical connection

When you have unpacked and set up the appliance as described, connect the plug to a mains power socket.

■ Before you connect the appliance, ensure that the connection data (voltage and frequency) specified on the data plate tally with that specified on your mains power supply.
■ The mains power socket must be protected by a 16 A circuit breaker.
■ Do not use an extension cable to connect the appliance. In the event of an emergency, the plug must be quickly accessible.
■ Do not route the power cable over the appliance or over hot and/or sharp-edged surfaces.
■ Ensure that the power cable cannot become trapped.

The electrical safety of the appliance is only assured when it is connected to a correctly installed protective conductor system. Operation on a mains power socket without a protective conductor is prohibited. If in doubt, arrange for the house wiring to be checked by a qualified electrician.

The manufacturer is not liable for damage caused in consequence of a missing or interrupted protective conductor.

Operation

The hobs

Both hobs ①/② have 5 power levels:

Power levels of the right hob 2 in watts200 400 600 800 1000
Power levels of the left hob 1 in watts600 1000 1300 1600 1800

Both hobs ①/② have 10 temperature levels:

Temperature levels in °C6080100120140160180200220240

Operation

1) Place the cooking vessel, with its contents, squarely on one of the hobs ①/②.

CAUTION - PROPERTY DAMAGE!

The pans that are placed on the two hobs ①/② may not weigh more than 10 kg in total (including their contents). Otherwise, the appliance could be damaged.

2) Press the "ON/OFF" button ⑬. The indicator light above the ON/OFF button ⑬ comes on.

NOTE

If you do not activate a hob ①/② within approx. 10 seconds, the appliance will switch itself off.

If cooking has already taken place and either hob ①/② still has a temperature in excess of 50°C, the respective display ⑩/⑰ will show "-H-".

TIPS

You may select between cooking with power levels or cooking with temperature settings:

▶ When you are cooking in the temperature mode, the appliance heats the cooking vessel to the set temperature. If the temperature falls below the set temperature, the appliance heats up again. The temperature is thus maintained at the desired level.
By adjusting the "power level", the cooking vessel is heated at varying speeds. The higher the selected power level, the faster the cookware is heated.

Always use the buttons on the appropriate control panel ④/⑤ for the respective hob ①/②. You may use the two hobs ①/② independently of one another.

3) Press the POWER button 12/19. The preset wattage can be seen on the display 10/17 (right hob 2 1000 W/left hob 1 1200 W). The indicator light above the POWER button 12/19 comes on.

NOTE

If you wish to cook in temperature level mode, press the TEMP button ⑧/⑮ instead of the POWER button ⑫/⑲. The preset temperature of 240°C will then appear on the display ⑩/⑰.
4) Press the buttons "+" 11/18 or "-" 9/16 as often as is required until the desired wattage/temperature appears on the display 10/17.
5) In order to switch off the hob ①/②, press and hold down the "POWER" button ⑫/⑲ until the hob ①/② switches off. To turn both hobs ①/② off at the same time, press the "ON/OFF" button ⑬.

NOTE

If both hobs ①/② are switched off after use or adjustment, you must first press the "ON/OFF" button ⑬ to be able to re-adjust the settings.

NOTE

After switching off in standby mode, the appliance's fans continue to run for a while to discharge the heat. As long as the hobs ①/② are at a temperature in excess of 50°C, the respective display ⑩/⑰ will show "-H-". As long as "-H-" is shown on the display ⑩/⑰, you can reactivate the hobs ①/② by pressing the POWER ⑫/⑲ or TEMP ⑧/⑮ buttons.

NOTE

If no button is depressed for a period of two hours, the appliance will switch off even if one or both of the hobs ①/② is/are in operation. If you wish to wish to cook a dish for more than two hours, or to keep food warm for more than two hours, adjust the desired time using the timer (see the "Timer" section). In this way, times of up to three hours can be set.

Safety cut-off

For safety reasons, the pan detection switches the appliance off automatically (into standby mode) if you remove the cooking vessel from the hob ①/② or fail to place a cooking vessel on it.

If you remove the cooking vessel from the hob ①/②, there will be 20 beeps. The appliance will then switch off. If you place the cooking vessel back on the hob ①/② before the 20 beeps have finished, the previously defined settings will be retained.

NOTE

As soon as you remove the cooking vessel from the hob ①/②, "E0" is shown on the display. After approx. one minute, the "E0" disappears and the appliance switches itself off. If the hob is still at a temperature in excess of 50^ , "-H-" will show on the respective display until the temperature drops below 50^ .

Timer

You can preselect a time period from 5-180 mins., after which the respective hob ①/② will switch off.

1) Begin the cooking procedure (in power or temperature mode) as explained above.

2) Press the "TIME" button ⑦/⑭. "O" appears on the display ⑩/⑰. Set the desired time.

If you briefly press the "+" 11/18 or "-" 9/16 buttons, the time increases or decreases by 5 minutes each time the button is depressed. If you press and hold down the "+" 11/18 or "-" 9/16 button, the time increases or decreases by 10 minutes for each time the button is depressed.

The display 10/17 now alternately shows the set power level/temperature and the time that remains until switch-off.

After this time, the respective hob ①/② switches off automatically.

Child safety lock

To prevent unauthorised switching on or setting modification, for instance by children, this appliance is fitted with a child safety lock.

NOTE

It does not matter whether you activate the child safety lock using the buttons "+" 18 and "-" 16 or using the buttons "+" 16 and "-" 18. All buttons, except the "ON/OFF" button 13, are always locked.

NOTE

▶ You can also the child safety lock as a safe-wipe function: Before you wipe the buttons with a damp cloth, activate the child safety lock. This helps avoid any inadvertent activation of buttons.

When the appliance is in operation:

Press the "+" 11/13 and "-" 9/16 buttons together. "Loc" (LOCK), alternating with the set power level/temperature, will show on the display 10/17. Now all buttons, including the "ON/OFF" button 13 are locked.
If a single hob 1/2 is activated, the respective display 10/17 shows "Loc" (LOCK), alternating with the set power level/temperature. "Loc" is permanently shown on the display 10/17 of the hob 1/2 that is not in operation.
To deactivate the child safety lock, press the "+" 11/18 and "-" 9/16 buttons together. The buttons can now be activated again.

When the appliance is switched off :

■ Press the "ON/OFF" button ⑬ to switch on the appliance.
Press the "+" 11/18 and "-" 9/16 buttons together. "Loc" (LOCK) appears on the display 10/17. Now, all buttons, except the "ON/OFF" button 13 are locked. After 10 seconds, the appliance will switch itself off.
If you press the "ON/OFF" button ⑬ again in order to switch the appliance on, the display shows ⑩/⑰ "Loc", and the buttons remain locked. To deactivate the child safety lock, press the "+" ⑪/⑱ and "-" ⑨/⑯ buttons again together. The buttons can now be activated again.

When the timer is in operation:

Press the "+" 11/18 and "-" 9/16 buttons together. "Loc" (LOCK), alternating with the current timer time, will show on the display 10/17.
To deactivate the child safety lock, press the "+" 11/18 and "-" 9/16 buttons again together. The buttons can now be activated again.

Cleaning

WARNING - RISK OF ELECTRIC SHOCK!

▶ Always remove the plug from the mains power socket before cleaning the appliance.

SILVERCREST SDI 3500 A1 - WARNING - RISK OF ELECTRIC SHOCK! - 1

Under no circumstances should the appliance or any parts thereof be immersed in liquids! This could result in a potentially fatal electric shock, and the appliance could be damaged.

▶ Never open the appliance housing! This could lead to a potentially fatal electric shock!

△WARNING - RISK OF INJURY!

▶ Allow the appliance to cool down completely before cleaning it. Risk of burns!

CAUTION - PROPERTY DAMAGE!

Do not use solvents or abrasive cleaners. These could damage the hobs ①/② of the appliance.
▶ Do not use aggressive, chemical or abrasive cleaning agents! They could irreparably damage the surface!

■ Use only a lightly moistened cloth to clean all surfaces and the power cable.

■ Always dry the appliance properly before using it again.

- You can remove burnt-on soiling on the hobs ①/② using a scraper specifically designed for ceramic hobs (available in most shops selling household equipment).

If there is any soiling in the area of the ventilation slots on the base of the appliance, you can attempt to remove this from the outside using a vacuum cleaner.

Storage

■ Store the cleaned and dried appliance in a dust-free and clean location.

Troubleshooting

PROBLEM POSSIBLE CAUSEPOSSIBLE SOLUTIONS
The appliance is not working. The indicator light above the ON/OFF button 13 fails to come on.The plug is not connected.Connect the appliance to a mains power socket.
The appliance is damaged.Contact the Customer Service department.
The appliance does not start the cooking process.There is no vessel on the respective hob 1/2.Place a suitable vessel on the respective hob 1/2.
The vessel is not suitable for induction hobs.Use a suitable vessel (see the "Suitable cookware" section).
E0 is shown on one of the displays 10/17.There is no vessel on the respective hob 1/2.Place a suitable vessel on the respective hob 1/2.
E2 is shown on one of the displays 10/17.The temperature sensor beneath the hob 1/2 is defective or there is a short circuit.Disconnect the plug from the mains power socket and contact the Customer Service department.
E3 is shown on one of the displays 10/17.The appliance is being supplied with too much voltage (>270 V).Check and ensure that the appliance is connected to a properly installed mains power socket with 220-240 V~, 50 Hz.
E4 is shown on one of the displays 10/17.The appliance is not being supplied with enough voltage (<150 V).Check and ensure that the appliance is connected to a properly installed mains power socket with 220-240 V~, 50 Hz.
E6 is shown on one of the displays 10/17.The appliance has overheated.Disconnect the plug from the mains power socket and wait until the appliance has cooled down.

Disposal of the appliance

SILVERCREST SDI 3500 A1 - Disposal of the appliance - 1

Under no circumstances should you dispose of the appliance with the normal household waste. This product is subject to the provisions of European Directive 2012/19/EU.

Dispose of the appliance via an approved waste disposal company or your municipal waste disposal facility. Please observe applicable regulations. Please contact your waste disposal facility if you are in any doubt.

Notes on the EC Declaration of Conformity

This appliance complies with the essential requirements and other relevant provisions of the European Electromagnetic Compatibility Directive 2014/30/EU, the Low Voltage Directive 2014/35/EU, as well as the ErP Directive 2009/125/EC, Ordinance No. 66/2014 Annex I, Sections 2 and 2.2.

The complete Declaration of Conformity, in its original form, is available from the importer.

SILVERCREST SDI 3500 A1 - Notes on the EC Declaration of Conformity - 1

Information for this domestic electric hob

Symbol Value Unit
Model identifi cation YL28-DC01
Type of hob - Domestic electric hobs -
Number of cooking zones and/or areas-2-
Heating technology (induction cooking zones and cooking areas, radiant cooking zones, solid plates)-Induction cooking zones-
For circular cooking zones or area: diameter of useful surface area per electric heated cooking zone, rounded to the nearest 5 mm∅ 20.0 / 20.0 cm
For non-circular cooking zones or areas: length and width of useful surface area per electric heated cooking zone or area, rounded to the nearest 5 mmLN/A cm
WN/A cm
Energy consumption per cooking zone or area calculated per kg EC_electric cooking 201.1 / 192.9 Wh/kg
Energy consumption for the hob calculated per kg EC_electric hob 197.0 Wh/kg

This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions

The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.

If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.

If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs eff ected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass.

The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.

This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

■ Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.

■ You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

■ You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

SILVERCREST SDI 3500 A1 - Warranty claim procedure - 1

You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.

Service

GB Service Great Britain

Tel.: 0871 5000 720 (£ 0.10/Min.)

E-Mail: kompernass@lidl.co.uk

IE Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: kompernass@lidl.ie

CY Service Cyprus

Tel.: 8009 4409

E-Mail: kompernass@lidl.com.cy

IAN 278854

Importer

Please note that the following address is not the service address. Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Περιεχόμενα

Εισαγωγή 22

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Inhaltsverzeichnis

Einleitung 42

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

DEUTSCHLAND / GERMANY

www.kompernass.com

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SILVERCREST

Model : SDI 3500 A1

Category : Frying Pan