PSWRM70 - Sports Watch Pyle - Free user manual and instructions
Find the device manual for free PSWRM70 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sports Watch |
| Brand | Pyle |
| Model | PSWRM70 |
| Display | Digital LCD |
| Power Source | Battery (CR2032) |
| Battery Life | Approximately 2 years |
| Water Resistance | 50 meters (5 ATM) |
| Functions | Time, Date, Stopwatch, Alarm, Backlight, Hourly Chime |
| Case Material | Plastic |
| Strap Material | Rubber |
| Dimensions (approx.) | 45 x 45 x 15 mm |
| Weight (approx.) | 50 g |
| Care Instructions | Wipe with a dry, soft cloth. Avoid contact with solvents or harsh chemicals. |
| Safety Precautions | Not suitable for scuba diving. Keep away from extreme temperatures. |
| Spare Parts & Repairability | Battery replacement should be performed by a professional. No user-serviceable parts. |
Frequently Asked Questions - PSWRM70 Pyle
How do I set the time on my Pyle PSWRM70?
To set the time, press the Mode button until the seconds flash. Use the Start/Stop button to set seconds, then press Mode again to set minutes, then hours, then date. Press Reset to save and exit.
How do I use the stopwatch function?
Press the Mode button repeatedly until the stopwatch display appears. Press Start/Stop to begin timing, press again to stop. Press Reset to reset the stopwatch to zero.
How do I replace the battery?
The watch uses a CR2032 battery. Remove the back cover using a small screwdriver, replace the battery with the positive side facing up, and replace the back cover. Ensure the gasket is properly seated to maintain water resistance. For best results, have the battery replaced by a professional.
Is the Pyle PSWRM70 waterproof?
Yes, the watch is water-resistant to 50 meters (5 ATM). It is suitable for swimming and showering, but not for scuba diving or high-pressure water activities.
How do I set the alarm?
Press the Mode button until the alarm time appears. Press Start/Stop to toggle alarm on/off. To set the alarm time, press Reset until the hour flashes, then use Start/Stop to adjust, press Mode to move to minutes, and press Reset to save.
How do I turn on the backlight?
Press the Light button (usually top right) to activate the backlight for a few seconds. The backlight illuminates the display in low-light conditions.
What should I do if the display is dim or fading?
A dim display usually indicates a low battery. Replace the battery with a new CR2032 as described above. If the problem persists, contact Pyle support.
How do I adjust the strap?
The rubber strap has multiple holes. Press the buckle pin into the desired hole to adjust the length. Use a spring bar tool to remove links if needed; the strap is standard 20 mm width.
Can I swim with the Pyle PSWRM70?
Yes, the watch is water-resistant to 50 meters, so you can swim and snorkel with it. However, avoid pressing buttons underwater and rinse with fresh water after saltwater exposure.
How do I reset the watch to factory settings?
Remove the battery for a few minutes, then reinsert it. This will clear all settings. Alternatively, press and hold the Mode and Reset buttons simultaneously for 3 seconds until the display resets.
User questions about PSWRM70 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sports Watch in PDF format for free! Find your manual PSWRM70 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSWRM70 by Pyle.