E 400 - Juicer STEBA - Free user manual and instructions

Product type	Juice extractor
Brand	Steba
Model	E 400
Power	400 W
Rotation speed	60-80 rpm (slow rotation)
Pulp container capacity	1.5 L
Juice container capacity	1 L
Dimensions (L x W x H)	30 x 25 x 40 cm
Net weight	4.2 kg
Housing material	ABS plastic and stainless steel
Power supply	220-240 V ~ 50/60 Hz
Power cord length	1.2 m
Extraction system type	Slow mastication auger
Reverse function	Yes, to prevent jams
Safety	Safety lock, auto shut-off in case of overheating
Maintenance and cleaning	Removable parts dishwasher safe
Included accessories	Pusher, cleaning brush, pulp container
Warranty	2 years

Frequently Asked Questions - E 400 STEBA

How to clean the Steba E 400 juice extractor?

Disassemble all parts in contact with food and rinse them immediately after use. Use the supplied brush to clean the auger and strainer. All removable parts are dishwasher safe (top rack).

What to do if the extractor gets blocked during use?

Use the reverse function (Reverse button) to unblock the auger. If that does not suffice, turn off the appliance, unplug it and manually remove the stuck food.

What types of fruits and vegetables can be used?

The extractor is suitable for most hard fruits and vegetables (apples, carrots, beets) and soft ones (oranges, cucumbers). Cut the food into pieces suitable for the chute. Avoid hard pits and very long fibers.

Is the appliance noisy?

No, the slow rotation motor (60-80 rpm) is particularly quiet compared to traditional centrifuges.

How to get maximum juice?

Use fresh and firm produce. Insert food slowly and use the pusher without forcing. The mastication system extracts up to 90% of the juice.

Can I make juice in advance?

It is recommended to consume the juice immediately to preserve nutrients. Keep it in the refrigerator in an airtight container for up to 24 hours maximum.

How to prevent juice oxidation?

Add a few drops of lemon juice to the freshly squeezed juice to slow down oxidation. Consume quickly.

Does the appliance have a warranty?

Yes, the Steba E 400 extractor is covered by a 2-year warranty against manufacturing defects. Keep the purchase receipt.

Can I process herbs or leafy greens?

Yes, the extractor handles spinach, kale and other leafy greens well. Alternate with harder fruits to facilitate the process.

How to replace a defective part?

Contact Steba after-sales service or an authorized dealer. Spare parts (strainer, auger, seals) are available. Only use original parts.

USER MANUAL E 400 STEBA

220-240 V\~; 50/60 Hz; 400 W

Slow-Juicer

E 400

Instructions for use 13

Mode d'emploi 20

Brugsanvisning 27

Zusammenbau

1. Distribution
2. Strainer holder
3. Strainer
4. Juice auger

5. Filling tube

6. Rubber pad

7. Pulp container
8. Juice container
9. Pusher
10. Cleaning brush

Generally

This appliance is for private and indoor use only and must not be used commercially. Please read the instruction manual carefully and keep it at a safe place. When the appliance is given to another person the instruction manual should be passed to that person, too. Only use the appliance as described in the instruction manual and pay attention to the safety information. No liability for damages or accidents will be accepted, which are caused by not paying attention to the instruction manual.

Safety information

• The appliance must be used and plugged in only according the requirements shown on the rating label.
• Use the appliance only if the cord shows no damages. Check this before every use!
• Do not touch the power plug with wet hands.
• Connect the power plug to a properly installed and easily accessible socket only.
• To unplug the power plug, always pull the plug – not the cable.
• Plug off the appliance after each use or in case of failure.
• Do not pull at the cord. Don't pull it over edges and don't bend it too much.
• Keep the cord away from hot parts.
• Only use the appliance according the instructions on the rating label
• Assemble the juicer correctly, else the appliance cannot be switched on
• Place the appliance in a even, dry and stable working surface
• To avoid any electrical shock, never immerse the appliance or the power cord into water.

• Never use the appliance when the power cord is damaged or the appliance has fallen down

• The power cord shall not hang over sharp edges or touch hot surfaces.

• Pull the plug out of the socket after each usage and during any cleaning
• Before each usage it must be checked carefully that the appliance is assembled correctly
• To avoid any dangers any damaged power cord, plug, or after a malfunction the appliance must be exchanged by an authorized servicemen.

The appliance can be used by children aged 8 and above and persons with limited physical, sensory or mental capabilities or lack of experience/knowledge, provided that are supervised or have been provided with instruction in the safe use of the appliance and have understood the resulting dangers. Children must not use the packaging as a toy. Cleaning and user maintenance must not be carried out by children unless they are 8 years or older and are supervised.

- Children under the age of 8 must be kept away from the appliance and the connecting cable.

- Children should be supervised to ensure that they do not play with the appliance or packaging material (e.g. Plastic Bags).

- The appliance must not be operated using a timer or a separate remote system!

- Hygiene: Please always clean the device to avoid bacteria and mold formation.

Never push food with the fingers or any other non suitable item into the feeding opening, only use the delivered pusher.

- The food will be squeezed by the slow running juice auger, unsuitable tools and seeds destroy the device.

- The appliance must not be used when the sieve or any other part is damaged.

• Never run the motor for more than 7 minutes, to avoid any overheating. If the motor is overloaded for more than 10 seconds, the motor will switch off automatically. When this happens, please turn the switch to "0" position, plug out and then, leave the motor to cool for about 3 min.
• If the device is blocked while juicing, turn the switch to 0 immediately and then on "R" in order to eliminate the blockade.
• Be sure to check that the filter basket is always clean.

Cleaning:

• Turn the switch to 0 und unplug the device.
• Never immerse the motor part into water.
• Open the filling tube (no.5) with a rotary move.

- Clean the juice auger (no.4), the strainer (no.3), the strainer holder (no.2) and the distributor (no.1) with washing up liquid and leave to dry.

- Take care with the strainer in order to avoid damages on the metal foil.

• Place the rubber pad (no.6) into the pulp ejection.
• Mount the device as described in section assembly.

Assembly:

• The motor base should be wiped with a damp cloth. All other parts can be rinsed and dried.
  A: Place the strainer (no.3) into the strainer holder (no.2).
• B: Place the package from A into the distributor (no.1). keep in mind that the rubber pad must be placed above the pulp ejection.
  · C: Place the package from B onto the 3 pins on the motor part.
  · D: Place the juice auger into package B.
  · E: Mount the filling tube with a rotary move.

Then plug in the appliance.

Usage:

• Move the on/off switch to „on“.
• When the device is being used for the first time, the motor may briefly generate a slight odour.
  · Always use washed, hygienic food.
• Put the food from which the juice is to be extracted into the filling funnel with the motor running.
• Never put food with hard seeds or shells into the filling tunnel, the device might get blocked and destroyed. Food must be cut to fit into the filling tube.
• Press the pusher slowly, without force down. Never use any other appliances or put fingers into the feeding opening. Risk of injuries!
• After the last filling let the appliance work for some seconds, that the juice can drop out of the spout.
• Do not overfill the pulp container, as this can cause problems during usage or even damage the appliance.
  · Never run the device without food or if overfilled.

Hints:

Rinse all fruits or vegetables. It is not necessary to cut most of fruits or vegetables, when they fit into the feeding opening.

The skins of fruits with a hard or a skin which is not suitable for eating, like kiwi or melon, should be removed before juicing.

At Pineappels the hard base should be removed, it is not necessary to peel it.

Citrus fruits should be peeled before juicing.

Add a small amount of lemon juice to apple juice. This avoids that the color of the juice changes.

The stone of fruits must be removed.

Do not juice banana, avocado or grapes, as this will jam the appliance.

The pulp contains fibers and cellulose and contains plenty of nutritious ingredients.

The pulp of vegetables can be used e.g. to thicken a soup. The pulp must be used on the same day!

Failure list

Possible problem Easiest solution for the problem
The appliance is not working when switched on	· Is the device plugged in? · Is the device assembled in the right way?
The motor jams during juicing	· Remove large fruit stones. Always put the fruit into the appliance when it is working. Never push too hard with the pusher on the food.
The pulp is too wet and not enough juice is received.	· Take fresh, ripe and not too cold fruits. · Check whether the rubber pad on the distributor is closed.
The appliance is very loud or vibrates	· This is normal if hard fruits are juiced.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Packaging disposal: Do not throw away the package materials. Please put it in the recycling bin.

Gift box: Paper, should be put to the old paper collection point. Plastic packaging material and foils should be collected in the special collection containers.

Service and Repair:

If the appliance must be repaired, please get in touch with your trader or with the manufacturer:

Assemblage

1. Fordeler
2. Siholder
3. Si
4. Juicepressersnegl

5. Påfyldningsrør

6. Gummipad

7. Pulp beholder
8. Juice beholder
9. Stopper
10. Rensebørste

Generelt

Anvendelse:

Сборка