VTSSC40N - Welding machine VELLEMAN - Free user manual and instructions

Product type	Electric arc welding machine (MMA)
Model	VTSSC40N
Brand	Velleman
Supply voltage	230 V~, 50 Hz
Welding current	10 A to 40 A (adjustable)
Duty cycle	30% at 40 A, 100% at 20 A
Electrode diameter	1.6 mm to 3.2 mm
Power consumption	4.5 kW max
Dimensions (L x W x H)	200 x 100 x 150 mm
Weight	6 kg
Technology	Inverter
Main functions	MMA welding, TIG welding (with optional torch), fine current adjustment, anti-stick, hot start
Maintenance and cleaning	Clean the ventilation grilles with a soft brush; regularly check cables and ground clamp
Safety	Thermal protection, overload switch, double electrical insulation
Spare parts and repairability	Available: cables, electrode holders, ground clamp, optional TIG torch; repair possible by a professional
General information	For domestic and DIY use; requires welding helmet, gloves, and protective clothing

Frequently Asked Questions - VTSSC40N VELLEMAN

What type of current to use with the VTSSC40N?

The machine uses single-phase alternating current 230 V~, 50 Hz. Plug it into a standard grounded mains socket.

What is the recommended maximum electrode diameter?

The maximum electrode diameter is 3.2 mm. For thinner electrodes (1.6 mm), reduce the welding current.

How to adjust the welding current?

Turn the adjustment knob on the front panel to set the current between 10 A and 40 A. Refer to the correspondence table in the manual.

Does the machine have overheating protection?

Yes, it is equipped with thermal protection that automatically cuts off the power if the internal temperature becomes too high. Allow it to cool before reusing.

Can I use the TIG torch with this model?

Yes, the VTSSC40N can be used for basic TIG welding with a TIG torch equipped with an optional gas valve. The current must be adjusted manually.

How to maintain the welding machine?

Unplug the device before any maintenance. Clean the ventilation grilles with a non-metallic brush. Check the condition of cables and clamps. Store it in a dry place.

What protective equipment is required?

Always wear a welding helmet with appropriate filter, welder's gloves, flame-resistant clothing, and safety shoes.

What to do if the machine does not turn on?

First check the mains socket and fuse. If thermal protection has been triggered, wait 15 minutes. If the problem persists, contact an authorized service.

Where to find spare parts?

Cables, clamps, and electrodes are available from Velleman retailers or online. Only use parts compatible with model VTSSC40N.

Is the warranty applicable in case of professional use?

The standard warranty covers manufacturing defects for domestic use. For professional use, the warranty period may be reduced. Check the warranty conditions provided with the device.

USER MANUAL VTSSC40N VELLEMAN

Digital soldering machine with digital display and soldering tool, no visible text or symbols on main components

USER MANUAL 2

GEBRUIKERSHANDLEIDING 5

MODE D'EMPLOI 8

MANUAL DEL USUARIO 11

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

This soldering station features a temperature control (150°C to 450°C) and a digital temperature display which displays the set temperature and the actual temperature simultaneously.

The VTSSC40N is a 48W soldering station with a temperature sensor in the ceramic heating element. The heating element is supplied with the necessary power via a safe 24V transformer, while the bit is completely isolated from the mains. In case of malfunction, a warning will be displayed on the LCD and the device will emit a sound.

• This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid any hazard.

Close-up of a soldering iron with a digital soldering set and a blue soldering tool, no visible text or symbols.

1 LCD temperature read-out (display precision: 5%)
2 temperature control
3 iron stand
4 sponge tray
5 soldering iron connection
6 ON/OFF switch
7 soldering iron

at the rear: fuse holder (250V/1A 5x20mm: FF1N)

Standard bit

Replacement soldering iron

Spare bit

Power supply

Dimensions

Weight

Environmental conditions

BITC10N1

VTSSC40N/SP

BITC10N2, BITC10N3, BITC10N4

220-240 V\~, 50 Hz

185 x 100 x 170mm

1.58kg

+5><+40°C; RH<85%

2. Safety Instructions

	This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
	Read and understand this manual and all safety signs before using this appliance.
	Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids. Never put objects filled with liquids on top of or close to the device.
	Always disconnect mains power when the device is not in use or when servicing or maintenance activities are performed. Handle the power cord by the plug only.Caution! After switching off, leave the power cord plugged in for a few minutes. When you switch off the unit, the automatic cooling function blows cooling air through the heater pipe for a short period. This protects the heater from damage and extends its lifetime. Do not disconnect the mains plug during this cooling process.
	Do not crimp the power cord and protect it against damage.Warning! If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid any hazard.Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.Plug the power cord into a suitable, earthed mains outlet.Risk of electroshock when opening the cover. Touching live wires can cause life-threatening electroshocks. Do not disassemble or open the housing yourself. Have the device repaired by qualified personnel.Do not operate the device with wet hands.
	Never use the device on live electronic circuits. Make sure power to the work piece is cut and capacitors are discharged.
	Do not use near inflammable products or in explosive atmospheres. Heat can cause fire to inflammable products even when they are not in sight. Only use in properly ventilated rooms.
	Incorrect use may cause fire.Do not touch the shafts, tips, or hot air gun as this can cause serious burns. Keep the tips and hot air away from the body, clothes, or other flammable material. Do not aim the hot air gun at the eyes. Use gloves and/or heat-resistant tools to pick up the PCB assembly to prevent burns. Always return the irons and gun to their stands between uses; always let the device cool down after use and before storage.Place the device on a level, stable, and fire resistant working surface.
	WARNING! - This tool must be placed on its stand when not in use; do not leave the tool unattended when switched on.

Do not inhale solder fumes. The vapours that are released during soldering are harmful. Therefore, you shall only use the soldering station in well-ventilated areas or under an exhaust hood (solder fume extractor). Dispose of fume filters and solder residue in accordance with local regulations.

• Use the soldering iron on a heatproof workbench.
• Place the soldering iron in its holder after use.

- Let a hot soldering iron cool down naturally and do not immerse in water.

3. Operating Instructions

1. Verify whether the mains voltage is compatible with the operating voltage of the device before plugging it in.
2. Make sure that the device was not damaged in transit.
3. Connect the soldering iron by means of the 4-pin plug and screw its nut tightly.
4. Switch the device on by means of the on/off switch and set the desired temperature by means of the pushbuttons. One brief push will result in a 1° modification; keep the button pushed to modify faster (steps of 10°).

The set temperature is stored internally: the next time you use your VTSSC40N, it will automatically display the last set temperature.

4. Tips for New Tips

1. Switch the device on and set a temperature of 250^ C.
2. Coat the surface with solder when the temperature of the tip has reached 250^ C.
3. Install the desired temperature after allowing the unit to idle at 250^ C for 3 minutes.

The iron will be ready for use when the preset temperature is reached.

5. Common Causes for Tip Failure

• The tip is not sufficiently tinned.
• Wiping the tip on a surface with high sulphur content or on a dirty or dry sponge or rag.
• Contact between the tip and organic or chemical substances such as plastic, silicone, grease, etc.
• Impurities in the solder and/or solder with a low tin content.

6. Important Remarks

• Remove and clean the tip after heavy or moderate use. We recommend cleaning the tip every day if the device is used on a daily basis. Clear the tip from excess solder. Never clean the tip with a file or other abrasive materials.
• Always tin the tip before returning it to the holder, prior to deactivating the station or in case of long periods of inactivity. Clean the tip with a wet sponge or with our tip cleaner (ref. VTSTC) prior to use.
• Do not use temperatures >400^ for long periods of time as this will shorten the life of your tip.
• Do not heat the soldering iron without a tip: this will damage the heating component and the temperature sensor.
• Do not press too hard on the tip while soldering: this does not improve the heat transfer and may damage the tip.
• Only replace a blown fuse when the device is powered down and disconnected from the mains.

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulted from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE

The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

GEBRUIKERSHANDLEIDING

Close-up of a soldering iron with a digital timer and soldering tool, no visible text or symbols on the main components.

Vervanging soldeerbout

Reservebit

Voeding

Afmetingen

Gewicht

Omgeving

BITC10N1

VTSSC40N/SP

BITC10N2, BITC10N3, BITC10N4

220-240 V\~, 50 Hz

185 × 100 × 170mm

1.58kg

+5><+40°C; RH<85%

Close-up of a soldering iron with a digital timer and soldering tool, no visible text or symbols on the main components.

Close-up of a soldering iron with a digital timer and soldering tool, no visible text or symbols on the main components.

Close-up of a soldering iron with a digital timer and soldering tool, no visible text or symbols on the main components.

Close-up of a soldering iron with a digital timer and soldering tool, no visible text or symbols

Close-up of a soldering iron with a digital temperature tester and a blue soldering tool, no visible text or symbols.

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for EU):

- All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.

- Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.

You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

• Not covered by warranty:

- all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity...), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;

- consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts... (unlimited list);

- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc....;

- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer's instructions;

- damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);

- damage resulting from an inappropriate packing and shipping of the article; - all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.

- Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.

- Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.

• Repairs occurring after warranty expiration are subject to shipping costs.

- The above conditions are without prejudice to all commercial warranties.

The above enumeration is subject to modification according to the article (see article's manual).

NL