DCP-226 - Alarm Clock DAEWOO - Free user manual and instructions

Product type	Radio alarm clock
Brand	Daewoo
Model	DCP-226
Dimensions (W x H x D)	18.0 x 10.0 x 12.0 cm
Net weight	0.6 kg
Power supply	Mains 230 V, 50 Hz; backup battery CR2032
Power consumption	5 W (max)
Radio frequency range	FM 87.5 – 108 MHz; AM 530 – 1600 kHz
Display	Red LED, adjustable brightness (3 levels)
Alarm function	Single alarm with snooze and radio or buzzer
Radio function	Programmable standby, 10 FM/AM presets
Sleep timer function	Sleep timer up to 90 minutes
Temperature display	No
Auxiliary input	3.5 mm jack for external audio source
Housing material	ABS plastic
Maintenance and cleaning	Unplug before cleaning; use a soft dry cloth
Safety	Do not expose to moisture; do not open the device
Spare parts and repairability	Repairability index: 7.5/10; batteries available; removable antenna
Warranty	2 years
Box contents	Radio alarm clock, mains adapter, user manual

Frequently Asked Questions - DCP-226 DAEWOO

How to set the time on the Daewoo DCP-226?

Press the SET button until the hour digits flash. Use the + and - buttons to adjust the hour, then press SET again for the minutes. Confirm with SET.

How to set the alarm?

Press the ALARM button. The alarm digits flash. Use + and - to set the hour, then press ALARM to set the minutes. Choose the wake-up mode (radio or buzzer) with the ALARM MODE button.

How to use the snooze function?

When the alarm sounds, press the SNOOZE button. The alarm stops for 9 minutes, then sounds again. You can repeat this several times.

How to switch from radio to buzzer for the alarm?

Press the ALARM MODE button to switch between wake-up by radio (radio icon on) and wake-up by buzzer (buzzer icon on). The choice is saved.

How to preset radio stations?

Tune to a station with the TUNE or +/- buttons. Then, press and hold a preset slot (1 to 10) until you hear a beep. The station is saved.

How to adjust the display brightness?

Press the DIMMER button to cycle through brightness levels (high, medium, low). Release when the desired level is reached.

What to do if the device does not turn on?

Check that the mains adapter is properly connected and that the socket works. If the device operates on batteries, ensure the backup battery is inserted correctly.

How to reset the device to factory settings?

Insert a paperclip or pointed object into the RESET hole on the back of the device. Hold for 3 seconds. The time and settings are erased.

Can I connect a smartphone to the radio alarm clock?

Yes, via the auxiliary input AUX IN (3.5 mm jack) located at the back. Plug in your device and select AUX mode with the MODE button.

How to clean the Daewoo DCP-226?

Unplug the device before any cleaning. Use a soft dry cloth to wipe the surface. Do not use liquids, aerosols, or abrasive products.

USER MANUAL DCP-226 DAEWOO

MANUEL D'INSTRUCTIONS

MANUAL DE INSTRUÇÕES

INICIO

Please, read this manual carefully before operation.

RADIO OPERATION

1. Set the FUNCTION (ON/OFF/AUTO/BUZZ) switch to ON position.
2. Set the FM/USB selector switch to FM position.
3. Tune in a desired station by tuning the TUNING knob.
4. Adjust the VOLUME CONTROL for your desired listening level.
5. To turn of f the radio, set the FUNCTION (ON/OFF/AUTO/BUZZ) switch to OFF position.

Antennas:

FM: Extend the antenna and adjust its position for optimum reception.

CLOCK OPERATION

When you first turn on radio the time will automatically start counting from 0:00.

1. In standby mode to set the time, hold down the TIME/PROJECT button on the front of the radio. The time will start flashing.

2. Pressing the HOUR button until the desired hour is set. Press the MINUTE button to set the minutes.

Setting the alarm

1. Set the FUNCTION (ON/OFF/AUTO/BUZZ) switch to Buzz position.

2. In standby mode to set the alarm time, hold down the ▲ /OFF button on the left front side of the radio. The alarm will start flashing.

3. Pressing the HOUR button until the desired hour is set. Press the MINUTE button to set the minutes.

Checking the set alarm time:

Press and hold ▲ /OFF button to see the set alarm time.

Waking up to the radio

1. Set the function selector to ON to set the desired radio station and volume. Set the function selector to AUTO. The alarm indicator will now shine.
2. Set the desired alarm time by following the instructions above.
3. When the alarm time has been reached, the radio will come on at the desired station and volume.
4. To turn off the radio, press ▲ /OFF once. The radio will be turned off but the alarm will still be active and will start the radio again the same time the coming day.
5. Set the function selector to OFF if your do not want the alarm to start the radio again the coming day. The alarm indicator will unlit.

Waking up to the alarm signal

1. Set the function selector to Buzz, the Alarm indicator will now shine to indicate that the alarm is active.
2. When the alarm time has been reached the alarm will sound.
3. To turn off the alarm press ▲ /OFF, the alarm will turn itself off but the alarm will still be active and will sound again at same time the coming day.
4. Set the function selector to OFF if you do not want the alarm to sound again the coming day. The alarm indicator will unlit.

CLOCK OPERATION

SNOOZE

When the alarm sounds or starts the radio, press the SNOOZE button to activate the snooze function. The alarm will go silent but reactivate itself after 9 minutes.

To turn off the alarm completely, set the function selector to OFF, the alarm indicator will go dark.

SLEEP

Sleep (automatic radio shut-off). The radio can be set to automatically shut itself off after a specified time.

1. Set the function selector to ON to set the desired radio station and volume. Now set the function selector to OFF or AUTO or BUZZ.
2. Press SLEEP button. The display will show "120-110-100-90-80-70-60-50-40-30-20-10-OFF" as long as the button is pressed.

PROJECTING

1. In standby mode to set the time, hold down the PROJECT/TIME button once, the time will start display.
2. Press PROJÉCT/TIME button once the display time shut.
3. You can adjust the position of the projection by pulling out and changing the upper projection arm. The focus can be adjusted scrolling the knob under the projection arm for a better projection image.

USB OPERATION

1. Set the FUNCTION (ON/OFF/AUTO/BUZZ) switch to ON position.
2. Set the FM/USB selector switch to USB position, the USB LED will turn on.
3. Connect a USB disk drive containing MP3 files to the USB port. The music in the USB will start playing.
4. Press ▶II PLAY/PAUSE button again to stop playing temporarily.
5. Adjust the VOLUME CONTROL for your desired listening level.
6. Press ▶▶I NEXT BUTTON to search forward to select desired tracks.
7. Press ◀◀ PREVIOUS BUTTON to search backward to select desired tracks.
8. After using the USB, take out the USB disk.
9. To turn off the USB, set the FUNCTION (ON/OFF/AUTO/BUZZ) switch to OFF position, the USB LED will turn off.

SPECIFICATIONS

Power Supply AC 230V/50Hz (Voltage)

Battery (backup) R6PSG SIZE "AA" 1.5V x 2 (3V)

Power Consumption 3W (MAX)

Tuning System FM: 87,5 - 108 MHz

Audio Output Speakers (x1)

Output Power 250 MW (MAX) x 1

Unit Dimensions 128 x 120 x 111.6 mm (WHD)

Net Weight 440 G/PC

Note: Specifications and manual are subject to change without notice.

STATEMENT OF COMPLIANCE:

Industrias Masats S. L. U. declares product DCP-226 complies with the essential protective requirements and objectives of EMC Directive 2004/108/EC.

To check the entirely declaration of conformity of this model, visit www.electronicafl amagas.com.

GUARANTEE

This product is guaranteed against all manufacturing defects for 2 years from the date of purchase. If the care advice and instructions contained in this manual are not followed the guarantee will be automatically void.

For this guarantee to be valid, it is necessary to present the original receipt or invoice. Industrias Masats S. L. U. exclusive importer.

PRODUCT DISPOSAL

Attention should be drawn to the environmental aspects of battery disposal. Don't throw used batteries in dustbin.

Please contact your retailer in order to protect the environment. Electrical products should not be disposal of with household waste.

Please recycle where facilities exist.

INITIATION

▶II REPRODUIRE/PAUSE

▶▶ TOUCHE SUIVANT

TOUCHE ANTERIEUR

PORT USB

INTERRUPTEUR SELECTEUR FM/USB

FONCTIONNEMENT DE LA RADIO

DÉCLARATION DE CONFORMITÉ

ELIMINATION DU PRODUIT