Q: How do I adjust the refrigerator temperature if it is stuck at 14 degrees?

If the temperature of your DAEWOO FN-655NWS refrigerator is stuck at 14°C instead of going lower, here’s what to do: Check and adjust the temperature controls UP/DOWN buttons of the refrigerator compartment : Press the DOWN button several times to lower the temperature. The system operates on a continuous scale from minimum to maximum cooling. If the temperature remains at 14°C, keep pressing. Freezer control lever : Ensure that the lever is not set to MIN. Set it to NORMAL or MAX to improve the overall cooling of the appliance. Save Control function : Check that the Save Control (energy-saving) function is not activated. This function reduces cooling power. Disable it by pressing the corresponding button. Other possible causes If the temperature remains stuck at 14°C despite these adjustments: Clean the rear ventilation grilles and ensure that no objects are obstructing air circulation. Close the door properly and check that the seal is not damaged (a poorly closed door reduces cooling). Keep the appliance away from heat sources (direct sunlight, stove) and ensure it has at least 10 cm of free space on the sides and back. Wait 24 hours after the first start-up or after a power interruption: the appliance needs time to reach its optimal temperature. If the problem persists after these checks, it may be an internal fault in the cooling system.

Q: Why does the manual provided not match the KOG9G7R model?

You are right to ask this question. There is indeed a discrepancy: the PDF provided on this page is intended for the KOG-134K model, and not for the KOG9G7R as indicated in the title. Key differences between the two models: Microwave power: KOG-134K: 1000 W usable | KOG9G7R: 900 W Capacity: KOG-134K: ~37 liters | KOG9G7R: 25 liters Dimensions: KOG-134K: 563 x 318 x 454 mm | KOG9G7R: 485 x 395 x 280 mm Weight: KOG-134K: ~18 kg | KOG9G7R: 13 kg This type of pairing error makes the manual unsuitable for your device. We recommend reporting this error so that the site can be corrected with the proper manual for the KOG9G7R.

Q: Does the DAEWOO FRS-2041IAL have two compressors?

No, the DAEWOO FRS-2041IAL is equipped with a single compressor . The manufacturer's manual only mentions the compressor (in the singular) and makes no reference to a dual system. When handling or after a power outage, the manual also specifies: "Wait about 5 minutes before reconnecting to avoid any damage to the compressor and the refrigerator's electrical devices." If you need other detailed technical specifications, consult the nameplate on the back of the appliance or contact DAEWOO customer service.

Question 1

How do I adjust the refrigerator temperature if it is stuck at 14 degrees?

Accepted Answer

If the temperature of your DAEWOO FN-655NWS refrigerator is stuck at 14°C instead of going lower, here’s what to do:

Check and adjust the temperature controls

UP/DOWN buttons of the refrigerator compartment: Press the DOWN button several times to lower the temperature. The system operates on a continuous scale from minimum to maximum cooling. If the temperature remains at 14°C, keep pressing.
Freezer control lever: Ensure that the lever is not set to MIN. Set it to NORMAL or MAX to improve the overall cooling of the appliance.
Save Control function: Check that the Save Control (energy-saving) function is not activated. This function reduces cooling power. Disable it by pressing the corresponding button.

Other possible causes

If the temperature remains stuck at 14°C despite these adjustments:

Clean the rear ventilation grilles and ensure that no objects are obstructing air circulation.
Close the door properly and check that the seal is not damaged (a poorly closed door reduces cooling).
Keep the appliance away from heat sources (direct sunlight, stove) and ensure it has at least 10 cm of free space on the sides and back.
Wait 24 hours after the first start-up or after a power interruption: the appliance needs time to reach its optimal temperature.

If the problem persists after these checks, it may be an internal fault in the cooling system.

Question 2

Why does the manual provided not match the KOG9G7R model?

Accepted Answer

You are right to ask this question. There is indeed a discrepancy: the PDF provided on this page is intended for the KOG-134K model, and not for the KOG9G7R as indicated in the title.

Key differences between the two models:

Microwave power: KOG-134K: 1000 W usable | KOG9G7R: 900 W
Capacity: KOG-134K: ~37 liters | KOG9G7R: 25 liters
Dimensions: KOG-134K: 563 x 318 x 454 mm | KOG9G7R: 485 x 395 x 280 mm
Weight: KOG-134K: ~18 kg | KOG9G7R: 13 kg

This type of pairing error makes the manual unsuitable for your device. We recommend reporting this error so that the site can be corrected with the proper manual for the KOG9G7R.

Question 3

Does the DAEWOO FRS-2041IAL have two compressors?

Accepted Answer

No, the DAEWOO FRS-2041IAL is equipped with a single compressor. The manufacturer's manual only mentions the compressor (in the singular) and makes no reference to a dual system.

When handling or after a power outage, the manual also specifies: "Wait about 5 minutes before reconnecting to avoid any damage to the compressor and the refrigerator's electrical devices."

If you need other detailed technical specifications, consult the nameplate on the back of the appliance or contact DAEWOO customer service.

Question 4

Why is my DAEWOO FN-655NWS refrigerator leaking water at the bottom and how can I solve this problem?

Accepted Answer

If your DAEWOO FN-655NWS refrigerator is leaking water at the bottom, several causes may be responsible for this issue. Here are the checks and solutions to consider:

1. Check the water collection tray

The collection tray located at the back of the refrigerator collects water from defrosting. Make sure it is not full, misaligned, or cracked. If necessary, empty it and reposition it correctly.

2. Check the drainage hose

Inside the refrigerator, a drainage hose directs condensation water to the collection tray. If this hose is blocked or obstructed, water may accumulate and leak outside. Gently clean it with a wire or a damp cloth to remove any blockage.

3. Inspect the door seal

A damaged or dirty door seal can cause excessive condensation inside, which eventually leaks outside. Check that the seal is intact, clean, and provides a good seal. Clean it with a soft cloth and soapy water if needed.

4. Check the level of the refrigerator

An unlevel refrigerator can lead to poor water drainage. Use a level to check that the appliance is horizontal. Adjust the feet if necessary.

5. Defrosting

If your model is manually defrosted, ice buildup can cause leaks during defrosting. Perform a complete defrost by following the usual precautions to avoid this problem.

By applying these tips, you should be able to identify and resolve the water leak under your DAEWOO FN-655NWS refrigerator.

Question 5

What should I do if my DAEWOO KBE-U6RC oven is not heating anymore?

Accepted Answer

If your DAEWOO KBE-U6RC oven is not heating anymore, start by checking the power supply. Make sure the oven is properly plugged into the wall outlet and that it is functioning (test it with another device if necessary). Also, check that the circuit breaker in your electrical installation or the fuse dedicated to the oven has not tripped or blown. If the power is not passing through, reset the circuit breaker or replace the fuse before proceeding.

Next, check that the oven door closes properly. On this model, a poorly closed door prevents the oven from heating efficiently. Inspect the sealing gasket around the door to ensure it is not deformed or damaged. Close the door completely and you should feel a slight resistance indicating a good seal.

Check the setting of the temperature control knob (thermostat). The knob must be turned to the desired temperature between 0°C and 250°C maximum for the oven to heat. Also, make sure you have selected a cooking mode with heating: traditional heat, convection heat, grill, or rotisserie (depending on the desired function). Some specific modes may require particular settings.

During the operation of the KBE-U6RC oven, a light indicator for the thermostat lights up when heating is active. Wait a few minutes after turning on the oven, as it needs time to reach the selected temperature. Also, check that the 24-hour timer is not preventing the oven from starting in normal mode.

Warning: do not attempt to inspect or replace the heating elements yourself, as the oven and its components become very hot during use. These parts are at very high temperatures and their replacement requires technical expertise.

If after all these checks the oven still does not heat, or if you suspect a fault in the heating element or thermostat, contact an authorized DAEWOO professional or a qualified technician. Maintenance and repairs of this type fall under professional jurisdiction for safety reasons.

Question 6

How do I recharge the refrigerant gas in my DAEWOO FR-062 refrigerator?

Accepted Answer

The DAEWOO FR-062 refrigerator uses refrigerant gas to ensure cooling. If you notice that your appliance is not cooling properly, it is possible that the refrigerant gas is insufficient or there is a leak.

What to do to recharge the refrigerant gas?

Do not attempt to recharge the gas yourself: Handling refrigerant gas requires specific skills, appropriate tools, and compliance with environmental standards.
Contact a qualified professional: A refrigeration technician can diagnose the cause of the gas loss, repair any leaks, and properly recharge the refrigerant gas.
Do not ignore the problem: A gas leak can damage the compressor and lead to a more significant failure, as well as a negative environmental impact.

Maintenance tips

Ensure that the door seals are in good condition to avoid cold loss.
Regularly clean the coils at the back to optimize performance.
Monitor the temperature and overall operation to quickly detect any malfunction.

In summary, to recharge the refrigerant gas in your DAEWOO FR-062, consult a qualified professional to ensure the safety, compliance, and longevity of your appliance.

Question 7

What is the symbol representing the defrost function on the DAEWOO KOR9PDK microwave?

Accepted Answer

On the DAEWOO KOR9PDK microwave, the defrost function is indicated by a specific symbol on the control panel. This symbol usually resembles a snowflake or sometimes a drop of water.

This drawing serves to quickly identify the button or program dedicated to defrosting frozen foods.

To use the defrost function:

Locate the snowflake or drop of water symbol on the control panel.
Press this button to activate the defrost mode.
Then, you can set the time or weight according to the type of food to be defrosted.

This symbol is standard on many microwaves, making it easier to identify and use the defrost function on your DAEWOO KOR9PDK appliance.

Question 8

Why won't my DAEWOO H6IS35H1FR induction cooktop turn on despite being correctly plugged in?

Accepted Answer

If your DAEWOO H6IS35H1FR induction cooktop does not turn on, start by checking the power supply. Make sure that the fuse corresponding to the cooktop is functioning properly by checking it in the fuse box. Also, check that the main power supply is not cut off by testing other electronic devices. If you have a circuit breaker, check that it has not tripped for the cooktop circuit.

The child safety lock inadvertently activated is a common cause of complete blockage. On the H6IS35H1FR model, if the child safety LED is on and the controls are unresponsive, the cooktop is locked. To disable this mode: first turn on the cooktop with the On/Off button, then simultaneously press the touch slider on the left and right, and then press once on the left side. The symbol "L" (LOCKED) will no longer display and the cooktop should operate normally.

Check that the control buttons are not wet or that no object is placed on them. Wet controls can cause a safety lock with the flashing "F" symbol. Dry the controls or remove any object. Wait a few minutes after drying before trying again.

Also, make sure you have a compatible pot or pan placed on the cooking zone you are testing. You can use one of the 4 available zones: 3 zones Ø16 cm or the large zone Ø21 cm. Without a suitable ferromagnetic utensil on the zone, the cooktop will display "U" and will not activate.

If error codes appear, note them down. The codes E3 or E4 indicate issues with voltage or frequency different from the nominal value. In this case, turn off the cooktop, wait for the "H" (residual heat) symbol to disappear from all displays, then turn it back on. If the same error reappears, it is an electrical issue with your installation.

If the cooktop turned off after a few minutes of operation, the cooking zone may have reached a continuous operating time limit for thermal safety reasons. To reuse it, simply turn the cooking zone back on.

If after all these checks the DAEWOO H6IS35H1FR still does not turn on or displays a persistent error code, contact a qualified technician or DAEWOO customer service, as it may be a technical defect requiring professional intervention.

Question 9

How does the air circulation work between the freezer and the refrigerator on the DAEWOO FRS-2011IAL model?

Accepted Answer

On the DAEWOO FRS-2011IAL model, cold air circulation is essential to ensure effective cooling of the refrigerator. The cold air generated in the freezer is indeed directed to the refrigerator compartment to maintain an optimal temperature.

How air circulation works

Internal fan: A fan located in the freezer pushes cold air through ducts to the refrigerator.
Air vents: These passages allow cold air to circulate freely between the two compartments.
Thermostat: It regulates the temperature by adjusting the fan speed and the operation of the compressor.

Points to check if air circulation seems faulty

Fan operation: Ensure that the fan is running properly and is not blocked.
Absence of obstruction: Check that no ice buildup or objects are blocking the air vents.
Door seals: The seals should be in good condition to prevent warm air infiltration.

Good air circulation between the freezer and the refrigerator is crucial for uniform and efficient cooling. If a persistent problem occurs, a technical diagnosis may be necessary.

Question 10

Why is my DAEWOO FRS-2011IAL refrigerator not producing cold?

Accepted Answer

If your DAEWOO FRS-2011IAL refrigerator is not cooling properly, several causes may be responsible for this malfunction. Here are the checks and actions to perform to identify and possibly resolve the issue:

1. Check the thermostat

Make sure the thermostat is set to an appropriate temperature, usually between 3 and 5 °C. A setting that is too high can prevent the refrigerator from cooling sufficiently.

2. Check the power supply

Ensure that the refrigerator is properly plugged in and that the electrical outlet is functioning correctly.
Test the outlet with another device to ensure it is delivering power.

3. Inspect the door seals

Worn or improperly closed seals allow warm air to enter, preventing the cold from settling:

Examine the condition of the seals and clean them if necessary.
Ensure that the door closes tightly.

4. Clearance and ventilation

Good air circulation around the refrigerator is essential:

Do not block the ventilation grilles located at the back or on the sides.
Leave enough space between the refrigerator and the wall.

5. Check the compressor

The compressor is the heart of the cooling system:

Listen to see if it is working (a slight humming is normal).
If the compressor is hot but does not start, this may indicate a technical problem.

6. Check the defrosting

An accumulation of frost in the freezer compartment can block the circulation of cold air:

Check for excessive ice buildup and perform a manual defrost if necessary.

If, after these checks, your refrigerator still does not produce cold, it is advisable to consult a qualified professional for a thorough diagnosis and appropriate repair.

User manual DAEWOO : user manuals and guides in PDF

Models DAEWOO most viewed

Browse manuals DAEWOO by appliance type

Recent questions about devices DAEWOO