DAMS255CS - Saw DAEWOO - Free user manual and instructions
Find the device manual for free DAMS255CS DAEWOO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Daewoo |
| Model | DAMS255CS |
| Power Supply | Corded electric 230V~50Hz |
| Power Consumption | 1800 W |
| Blade Diameter | 255 mm |
| Bore Size | 30 mm |
| No-Load Speed | 4500 rpm |
| Max Cutting Depth at 90° | 85 mm |
| Max Cutting Depth at 45° | 60 mm |
| Weight | 6.2 kg |
| Dimensions (L×W×H) | 450 × 250 × 280 mm |
| Safety Features | Safety guard, spindle lock, anti-vibration handle |
| Additional Features | Laser cutting guide, dust extraction port |
| Maintenance | Clean after use, inspect carbon brushes periodically |
| Spare Parts & Repairability | Spare parts available from authorized Daewoo service centers |
| Included in Box | Circular saw, rip fence, blade wrench, user manual |
| Warranty | 2-year manufacturer's warranty |
Frequently Asked Questions - DAMS255CS DAEWOO
How do I change the saw blade on my Daewoo DAMS255CS?
To change the blade, first unplug the saw. Use the spindle lock to secure the blade, then loosen the blade bolt with the provided wrench. Replace the blade following the rotation direction indicated on the guard, then tighten the bolt securely.
What is the maximum cutting depth of the DAMS255CS at 90 degrees?
The maximum cutting depth at a 90-degree angle is 85 mm. At 45 degrees, it reduces to 60 mm.
Can I use a different blade size with this saw?
It is recommended to use a 255 mm blade with a 30 mm bore. Using a different size may affect safety and cutting performance.
El motor makes sparking sounds during operation. Is this normal?
Some sparking can be normal, especially if the carbon brushes are worn. If sparking is excessive, inspect the carbon brushes and replace them when necessary. Always turn off and unplug the saw before inspecting.
How do I adjust the cutting depth on the DAMS255CS?
Loosen the depth adjustment lever located near the base plate. Tilt the base to the desired depth, then retighten the lever. Check the scale for accurate settings.
What safety precautions should I follow while using this saw?
Always wear safety goggles and ear protection. Keep hands away from the blade, use the safety guard properly, and ensure the workpiece is firmly secured before cutting.
How often should I clean the saw and what is the best method?
Clean the saw after each use using a soft brush or cloth. Remove dust and debris from the air vents and around the blade. Avoid using water or harsh solvents; a vacuum with a fine nozzle works well.
Why does the saw leave burn marks on the wood?
Burn marks often occur when the blade is dull, the cutting speed is too slow, or the feed rate is inconsistent. Check the blade sharpness, ensure you're using the correct blade for the material, and maintain a steady push.
Is the saw suitable for cutting metal?
The DAMS255CS is primarily designed for wood and wood-based materials. Cutting metal requires a special metal-cutting blade and may damage the saw if used incorrectly. Always follow the manufacturer's guidelines.
How do I maintain the carbon brushes?
Inspect the carbon brushes after every 50 hours of use. If they are worn to less than 5 mm, replace them. Use only genuine Daewoo spare parts. After replacement, run the saw unloaded for a few minutes to seat the brushes.
User questions about DAMS255CS DAEWOO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual DAMS255CS - DAEWOO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DAMS255CS by DAEWOO.
USER MANUAL DAMS255CS DAEWOO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAEWOO
Model : DAMS255CS
Category : Saw