DALMCH18-1 - Saw DAEWOO - Free user manual and instructions
Find the device manual for free DALMCH18-1 DAEWOO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Circular Saw |
| Brand | Daewoo |
| Model | DALMCH18-1 |
| Power Source | 18V Lithium-Ion Cordless |
| Battery Voltage | 18V DC |
| Battery Type | Li-Ion (rechargeable) |
| Blade Diameter | 165 mm (6.5 inches) |
| No-Load Speed | 4500 RPM |
| Max Cutting Depth (90°) | 55 mm |
| Max Cutting Depth (45°) | 38 mm |
| Weight | 3.5 kg |
| Tool Dimensions | 310 × 190 × 260 mm |
| Cutting Angle Adjustment | Includes bevel cutting up to 45° |
| Safety Features | Electric brake, safety switch, blower |
| Dust Extraction | Vacuum adapter port for dust collection |
| Integral LED Light | Yes, for improved visibility |
| Maintenance and Cleaning | Remove battery before cleaning; wipe with dry cloth; avoid moisture |
| Spare Parts and Repairability | Replacement blade and brushes available; service via authorized centers |
| Package Contents | Saw, blade, dust bag, rip fence, hex wrench, manual |
| Certifications | CE / EAC compliant |
Frequently Asked Questions - DALMCH18-1 DAEWOO
How do I replace the saw blade?
First, disconnect the battery for safety. Use the spindle lock button to prevent rotation, then remove the blade bolt with the provided hex wrench. Replace the blade, ensuring the tooth direction matches the arrow on the upper guard, and tighten the bolt securely.
What type of battery does it use and how long does it last?
This saw uses an 18V Li-Ion battery. Battery life depends on the load and cutting conditions. For best performance, use a battery with at least 2.0Ah capacity. Cuts per charge typically range from 30 to 80 on standard 50mm lumber.
Can I cut metal with this saw?
Yes, but you must install a specific metal cutting blade (not included). Always use the appropriate blade for the material and adjust the speed if available. For metal cutting, use a lower speed setting and apply minimal pressure.
How do I adjust the cutting depth?
Loosen the depth adjustment knob located on the base plate. Set the desired depth by raising or lowering the base relative to the blade, then tighten the knob firmly. The depth scale on the base helps you achieve precise settings.
What safety equipment should I use?
Always wear safety goggles, ear protection, and a dust mask. Use a push stick for narrow pieces and ensure the workpiece is clamped. Never operate the saw without the lower guard in place and functional.
How should I clean and maintain the saw?
After each use, remove the battery and wipe the exterior with a dry cloth. Clean the air vents from dust using a soft brush. Periodically check the blade for wear and sharpness, and keep the blade screw tight.
Is the battery compatible with other Daewoo power tools?
This saw uses the 18V Daewoo battery system, which is compatible with most Daewoo 18V tools such as drills and impact drivers. Always ensure you use an original Daewoo battery to guarantee safety and performance.
How do I connect a dust extraction system?
The saw has a dust port on the rear. Fit the dust bag provided or connect a 35mm vacuum hose using an adapter (if necessary). This keeps your work area clean and improves cutting visibility.
Why does the saw stop during heavy cutting?
This is likely due to the overload protection or a low battery. When the saw draws too much power, the electronic protection shuts it off. Wait a few seconds, recharge or replace the battery, and reduce the cutting feed rate.
How should I store the saw?
Remove the battery and store the saw in a dry, cool place. Keep the blade guard closed and, if possible, use the included blade case. Ensure the tool is clean and free of sawdust before storage to prevent corrosion.
User questions about DALMCH18-1 DAEWOO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual DALMCH18-1 - DAEWOO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DALMCH18-1 by DAEWOO.
USER MANUAL DALMCH18-1 DAEWOO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DAEWOO
Model : DALMCH18-1
Category : Saw