PDM1051 - Drill Ferm - Free user manual and instructions

Product type	Cordless drill
Brand	Ferm
Model	PDM1051
Battery voltage	18 V
Battery type	Lithium-ion
Battery capacity	1.5 Ah
No-load speed	0-550 rpm (1st gear) / 0-1800 rpm (2nd gear)
Max torque	30 Nm
Chuck	Keyless chuck, capacity 1-10 mm
Number of speeds	2
Max drilling in wood	25 mm
Max drilling in metal	10 mm
Max drilling in concrete	10 mm
Weight	1.3 kg (with battery)
Dimensions (L × W × H)	210 × 65 × 210 mm
Sound pressure level	70 dB(A)
Sound power level	81 dB(A)
Vibration (drilling in metal)	2.5 m/s²
Power supply	18 V battery (not included)
Main functions	Drilling and screwing
Maintenance and cleaning	Clean with a dry cloth; do not use aggressive products
Safety	Motor brake, spindle lock, overload protection
Spare parts and repairability	Available via Ferm customer service

Frequently Asked Questions - PDM1051 Ferm

What type of battery should I use with the Ferm PDM1051 drill?

Use an 18 V lithium-ion battery from the Ferm range. The battery is not included with the tool.

How do I change the drill chuck?

The chuck is keyless. Turn the ring counterclockwise to open and insert the bit. Tighten by hand.

What is the maximum speed of the drill?

The drill has two speeds: 0-550 rpm in first gear and 0-1800 rpm in second gear. Select the speed appropriate for your work.

Is the drill suitable for drilling in concrete?

Yes, it can drill up to 10 mm in concrete. Use a suitable drill bit and activate the hammer mode if available.

How do I clean the Ferm PDM1051 drill?

Clean the tool with a dry, soft cloth. Avoid water and aggressive chemicals. Clean the ventilation slots regularly.

What is the weight of the drill with battery?

The weight is approximately 1.3 kg with a standard battery, making it light and easy to handle.

How do I adjust the torque setting?

Turn the torque adjustment ring located behind the chuck. Select the desired level (1-20) depending on the screw driving.

What should I do if the drill does not start?

Check that the battery is charged and inserted correctly. If the problem persists, contact Ferm customer service.

Does the drill have a motor brake?

Yes, the motor brake quickly stops the chuck when you release the trigger for increased safety.

Where can I find spare parts for the Ferm PDM1051?

Spare parts are available from Ferm customer service or on their website. Refer to the manual for part numbers.

USER MANUAL PDM1051 Ferm

Blue FERM electric drill put with black handle and grip, isolated on black background (no text or symbols visible)

PDM1051

EN Original instructions 04
DE Übersetzung der Originalbetriebsanleitung 07
NL Vertaling van de oorspronkelijke gebruiksaanwijzing 11
FR Traduction de la notice originale 15
ES Traducción del manual original 18
PT Tradução do manual original 22
IT Traduzione delle istruzioni originali 25
SV Översättning av bruksanvisning i original 29
FI Alkuperäisten ohjeiden käännös 33
DA Oversættelse af den originale brugsanvisning 37
HU Eredeti használati utasítás fordítása 40
CS Překlad původního návodu k používání 43
SK Preklad pôvodného návodu na použitie 47
PL Tłumaczenie instrukcji oryginalnej 50

LT Originalios instrukcijos vertimas 54
LV Instrukciju tulkojums no originālvalodas 57
ET Algupärase kasutusjuhendi tõlge 61
RO Traducere a instructiunilor originale 64
HR Prevedeno s izvornih uputa 68
SR Prevod originalnog uputstva 71
BS Prevod originalnog uputstva 71
BG Превод на оригиналната инструкция 75
RU Перевод исходных инструкций 79
EL Μετάφραση του πρωτοτύπου των οδηγιών χρήσης 83
TR Orijinal talimatların çevirisi 87
MK Копија на оригиналот инструкции 90
SQ Pärkthimi i udhëzimeve originale 94

CE

Fig. A

IMPACT DRILL PDM1051

Thank you for buying this Ferm product.

By doing so you now have an excellent product, delivered by one of Europe's leading suppliers.

All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.

SAFETY WARNINGS

WARNING

Read the enclosed safety warnings, the additional safety warnings and the instructions.

Failure to follow the safety warnings and the instructions may result in electric shock, fire and/or serious injury.

Keep the safety warnings and the instructions for future reference.

The following symbols are used in the user manual or on the product:

Read the user manual.

Risk of personal injury.

Risk of electric shock.

Immediately remove the mains plug from the mains if the mains cable becomes damaged and during cleaning and maintenance.

Wear safety goggles.

Wear hearing protection.

Wear a dust mask.

Wear safety gloves.

Variable electronic speed.

Double insulated.

Do not dispose of the product in unsuitable containers.

The product is in accordance with the applicable safety standards in the European directives.

Additional safety warnings for impact drills

• Do not work materials containing asbestos. Asbestos is considered carcinogenic.
• Wear safety goggles.
• Wear hearing protection to avoid the risk of hearing loss.
• If necessary, use other protective means, such as safety gloves, safety shoes, etc.
• Hold the machine with one hand on the main grip and the other hand on the auxiliary grip. Risk of personal injury.
• Hold the machine by the insulated gripping surfaces where the accessory may contact hidden wiring or the mains cable. If the accessory contacts a 'live' wire, the exposed metal parts of the machine can also become 'live'. Risk of electric shock.
• Do not use accessories which are not specifically designed and recommended by the manufacturer. Risk of personal injury.
• Only use accessories that are suitable for use with the machine.
• Only use accessories with the correct dimensions. Make sure that the accessories are properly mounted.
• Inspect the machine and the accessories before each use. Do not use accessories which are bent, cracked, or otherwise damaged. If the machine or one of the accessories is dropped, inspect the machine or the accessory for damage. If necessary, replace the accessory.

• Let the machine run at no load in a safe area after mounting the accessories. If the machine vibrates strongly, immediately switch off the machine, remove the mains plug from the mains, and try to solve the problem.

• Make sure that the maximum speed for the accessory is larger than or the same as the maximum speed of the machine. Refer to the rating plate on the machine.

• Before use, remove all nails and other metal objects from the workpiece.
• Make sure that the workpiece is properly supported or fixed.
• Keep your hands away from the workpiece during use.
• Never put the machine down on a table or a workbench before it has been switched off.

Electrical safety

Always check that the voltage of the power supply corresponds to the voltage on the rating plate.

• Do not use the machine if the mains cable or the mains plug is damaged.
• Only use extension cables that are suitable for the power rating of the machine with a minimum thickness of 1.5 mm^2 . If you use a extension cable reel, always fully unroll the cable.

TECHNICAL SPECIFICATIONS

Mains voltage 220-240V~
Mains frequency 50Hz
Power input 550 W
No-load speed 0 - 3.000 /min
Impact rate 0 - 48.000 /min
Protection class IP 20
Weight 1.88 kg
Max. drill diameter
Wood 25mm
Concrete 13mm
Steel	10mm
Noise values
Sound pressure (LPA)	94dB(A)
Acoustic power (LWA)	105dB(A)
Uncertainty (K)	3 dB(A)
Vibration values
Impact drilling into concrete, ah,ID	7.1 m/s2

Drilling into metal, a_h,D	2.87m/s ^2
Uncertainty (K)	1.5m/s ^2

Wear hearing protection.

Vibration level

The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned.

• using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
• the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level

Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns.

DESCRIPTION (FIG. A)

Your impact drill has been designed for drilling holes in wood, metal and plastics and for hammer drilling in brick and concrete.

1. On/offswitch
2. Lock-on button
3. Speed adjustment wheel
4. Forward/reverse switch
5. Switch for drilling / hammer drilling
6. Chuck
7. Main grip
8. Auxiliary grip
9. Depth stop
10. Rear sleeve
    11.Front sleeve

ASSEMBLY

Before assembly, always switch off the machine and remove the mains plug from the mains.

Exchanging and removing drill bits

Fig. A - B

The machine is suitable for use of the following drill bits:

• Wood(HSS)
  •Metal(HSS)
  • Concrete / masonry (hard metal)

Before exchanging bits, first remove the power plug from the wall socket.

Inspect bits regularly during use. Blunt bits should be re-sharpened or replaced.

• Open the chuck (6) by turning the front sleeve (11) clockwise while simultaneously holding the rear sleeve (10) or turning it counterclockwise and insert the bit into the chuck opening.
• Tighten the bit by turning the front sleeve (11) counterclockwise while simultaneously holding the rear sleeve (10) or turning it clockwise.

Mounting and removing the auxiliary grip (fig. C) Mounting

• Loosen the auxiliary grip (8).
• Slide the auxiliary grip (8) over the chuck (6).
• Turn the auxiliary grip (8) to the required position.
• Tighten the auxiliary grip (8).

Removing

• Loosen the auxiliary grip (8).
• Remove the auxiliary grip (8) from the chuck (6).
• Tighten the auxiliary grip (8).

Mounting and removing the depth stop (fig. D)

The depth stop is used to set the maximum drilling depth.

USE

Switching on and off (fig. A)

• To switch on the machine, press the on/off switch (1). The further the on/off switch (1) is pressed, the higher the speed of the machine.
• To switch the machine to continuous mode, keep the on/off switch (1) pressed and simultaneously press the lock-on button (2).

- To switch off continuous mode, press the on/off switch (1) again.

Forward/reverse switch (fig. A)

Do not change the direction of rotation during use.

• For clockwise rotation, slide the forward/reverse switch (4) to the left.
• For counterclockwise rotation, slide the forward/reverse switch (4) to the right.

Setting the maximum drilling speed (fig. A)

Do not set the speed during use.

• Turn the speed adjustment wheel (3) clockwise to increase the maximum drilling speed.
• Turn the speed adjustment wheel (3) counterclockwise to decrease the maximum drilling speed.

Setting the operating mode (fig. E)

Do not change the operating mode during use.

• Set the switch (5) to position "A" for drilling.
• Set the switch (5) to position "B" for hammer drilling.

CLEANING AND MAINTENANCE

Before cleaning and maintenance, always switch off the machine and remove the mains plug from the mains.

• Regularly clean the housing with a soft cloth.
• Keep the ventilation slots free from dust and dirt. If necessary, use a soft, moist cloth to remove dust and dirt from the ventilation slots.
• Regularly clean the chuck and the drill bit to avoid inaccuracies during use.

WARRANTY

Consult the enclosed warranty terms.

ENVIRONMENT

Disposal

The product, the accessories, and the packaging must be sorted for environmentally friendly recycling.

Only for EC countries

Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

The product and the user manual are subject to change. Specifications can be changed without further notice.

SCHLAGBOHRMASCHINE PDM1051

BESCHRIJVING (FIG. A)

Article no. Description	Position no.
503420 Left screw M5*25 1
410740 Keyless chuck p	astic 13 mm 2
503422 Spindle with ball	3, 4
503423 Impact spring 5
503424 Bearing 6201 RS	6
503425 Big gear 8
503426 Needle bearing HK071208 9
503427 Impact block 10
503428 Impact selector set 11, 12
503429 Bearing 608 13
503430 Carbon brush holder set (2pc) 14, 16
503431 Carbon brush set (2pc) 15
503432 Rotor with fan 17
503433 Bearing 607 18
503434 Stator 19
503435 Switch	21
503436 Side handle with depth limiter	34

Exploded view

CE

DECLARATION OF CONFORMITY PDM1051 - IMPACT DRILL

(EN) We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations:
(DE) Der Hersteller erklärt eigenverantwortlich, dass dieses Produkt der Direktive 2011/65/EU des Europäischen Parlaments und des Rats vom 8. Juni 2011 über die Einschränkung der Anwendung von bestimmten gefährlichen Stoffen in elektrischen und elektronischen Geräten entspricht. den folgenden Standards und Vorschriften entspricht:
(NL) Wij verklaren onder onze volledige verantwoordelijkheid dat dit product voldoet aan de conform Richtlijn 2011/65/EU van het Europees Parlement en de Raad van 8 juni 2011 betreffende beperking van het gebruik van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur en in overeenstem ming is met de volgende standaarden en reguleringen:
(FR) Nous déclarons sous notre seule responsabilité que ce produit est conforme aux standards et directives suivants: est conforme à la Directive 2011/65/EU du Parlement Européen et du Conseil du 8 juin 2011 concernant la limitation d'usage de certaines substances dangereuses dans l'équipement électrique et électronique.
(ES) Declaramos bajo nuestra exclusiva responsabilidad que este producto cumple con las siguientes normas y estándares de funcionamiento: se encuentra conforme con la Directiva 2011/65/UE del Parlamento Europeo y del Consejo de 8 de junio de 2011 sobre la restricción del uso de determinadas sustancias peligrosas en los equipos eléctricos y electrónicos.
(PT) Declaramos por nossa total responsabilidade de que este produto está em conformidade e cumpre as normas e regulamentações que se seguem: está em conformidade com a Directiva 2011/65/EU do Parlamento Europeu e com o Conselho de 8 de Junho de 2011 no que respeita à restrição de utilização de determinadas substâncias perigosas existentes em equipamento eléctrico e electrónico.
(IT) Dichiariamo, sotto la nostra responsabilità, che questo prodotto è conforme alle normative e ai regolamenti seguenti: è conforme alla Direttiva 2011/65/UE del Parlamento Europeo e del Consiglio dell'8 giugno 2011 sulla limitazione dell'uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche.
(SV) Vi garanterar på eget ansvar att denna produkt uppfyller och följer följande standarder och bestämmelser: uppfyller direktiv 2011/65/EU från Europeiska parlamentet och EG-rådet från den 8 juni 2011 om begränsningen av användning av farliga substanser i elektrisk och elektronisk utrustning.
(FI) Vakuutamme yksinomaan omalla vastuullamme, että tämä tuote täyttää seuraavat standardit ja säädökset: täyttää Euroopan parlamentin ja neuvoston 8. kesäkuuta 2011 päivätyn direktiivin 2011/65/EU vaatimukset koskien vaarallisten aineiden käytön rajoitusta sähkö- ja elektronisissa laitteissa.
(NO) Vi erklærer under vårt eget ansvar at dette produktet er i samsvar med følgende standarder og regler: er i samsvar med EU-direktivet 2011/65/EU fra Europa-parlamentet og Europa-rådet, pr. 8 juni 2011, om begrensning i bruken av visse farlige stoffer i elektrisk og elektronisk utstyr.
(DA) Vi erklærer under eget ansvar, at dette produkt er i overensstemmelse med følgende standarder og bestemmelser: er i overensstemmelse med direktiv 2011/65/EU fra Europa-Parlamentet og Rådet af 8. juni 2011 om begrænsning af anvendelsen af visse farlige stoffer i elektrisk og elektronisk udstyr.
(HU) Felelősségünk teljes tudatában kijelentjük, hogy ez a termék teljes mértékben megfelel az alábbi szabványoknak és előírásoknak: je v souladu se směmici 2011/65/EU Evropského parlamentu a Rady EU ze dne 8. června 2011, která se týká omezení použití určitých nebezpečných látek v elektrických a elektronických zařízeních.
(CS) Na naši vlastní zodpovědnost prohlašujeme, že je tento výrobek v souladu s následujícimi standardy a normami: Je v súlade s normou 2011/65/EÚ Európskeho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení.
(SK) Vyhlasujeme na našu výhradnú zodpovednost, že tento výrobok je v zhode a súlade s nasledujúcimi normami a predpismí: Je v súlade s normou 2011/65/EÚ Európskeho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebez pečných látok v elektrickom a elektronickom vybavení.

(SL) S polno odgovomostjo izjavljamo, da je ta izdelek v skladu in da odgovarja naslednjim standardom terpredpisom: je v skladu z direktivo 2011/65/EU Evropskega parlamenta in Sveta z dne 8. junij 2011 o omejevanju uporabe določenih nevarnih snovi v električni in elektronski opremi.
(PL) Deklarujemy na własną odpowiedzialność, że ten produkt spełnia wymogi zawarte w następujących normach i przepisach: jest zgodny z Dyrektywą 2011/65/UE Parlamentu Europejskiego i Rady z dnia 8 czerwca 2011 r. w sprawie ograniczenia stosowania niek tórych niebezpiecznych substancji w sprzecie elektrycznym i elektronicznym.
(LT) Prisiimdami visą atsakomybę deklaruojame, kad śis gaminys atitinka żemiau paminėtus standartus arba nuostatus: atitinka 2011 m. birželio 8 d. Europos Parlamento ir Tarybos direktyvą 2011/65/EB dėl tam tikru pavojingų medžiagų naudojimo elektros ir elektroninėje įrangoje apribojimo.
(LV) Ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai 2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās.
(ET) Apgalvojam ar visu atbildību, ka šis produkts ir saskaņā un atbilst sekojošiem standar tiem un nolikumiem: ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai 2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās.
(RO) Declarăm prin aceasta cu răspunderea deplină că produsul acesta este în conformitate cu următoarele standarde sau directive: este în conformitate cu Directiva 2011/65/UE a Parlamentului European și a Consiliului din 8 iunie 2011 cu privire la interzicerea utilizării anumitor substanțe periculoase la echipamentele electrice și electronice.
(HR) Izjavljujemo pod vlastitom odgovorno,šu da je strojem ukladan sa slijedešim standardima ili standardiziranim dokumentima i u skladu sa odredbama: usklađeno s Direktivom 2011/65/EU europskog parlamenta i vijeća izdanom 8. lipnja 2011. o ograničenju korištenja određenih opasnih tvari u električnoj i elektroničkoj opremi.
(SR) Pod punom odgovornošću izjavljujemo da je usaglašen sa sledećim standardima ili normama: usaglašen sa direktivom 2011/65/EU Evropskog parlamenta i Saveta od 8. juna.2011. godine za restrikciju upotrebe određenih opasnih materija u električnoj i elektronskoj opremi.
(BG) Ние декларираме на наша отговорност, че този продукт отговаря на съответствие с Директива 2011/65/EC на Европейския парламент и на Съвета от 8 юни 2011 г. относно ограничението на употребата на определени опасни вещества в електрическото и електронното оборудване, в съответствие с следните стандарти и наредби
(RU) Под свою ответственность заявляем, что данное изделие соответствует следующим стандартам и нормам: соответствует требованиям Директивы 2011/65/EU Европейского парламента и совета от 8 июня 2011 г. по ограничению использования определенных опасных веществ в электрическом и электронном оборудовании
(UK) На свою власну відповідальність заявляемо, що дане обладнання відповідає наступним стандартам і нормативам: задовольняє вимоги Директиви 2011/65/ЄС Європейського Парламенту та Ради від 8 червня 2011 року на обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні.
(EL) Δηλώνουμε υπεύθυνα ότι το προϊόν αυτό συμφωνεί και τηρεί τους παρακάτω κανονισμούς και πράτυτα: συμμορφώνεται με την οδηγία 2011/65/ΕΕ του Ευρωπαϊκού Καινοβουλίου και του Συμβουλίους της δης Ιουνίου 2011 για τον περιορισμέν της χρήσης ορισμένων επικίνδυνων ουσιών σε ηλεκτρικό και ηλεκτρονικό εξσπλισμό.
(AR) تعلن على مسانيتنا وحدنا أن هذا المنتج يتوافق مع المعيار والترجمةك電話
(TR) Tek sorumlusu biz olarak bu ürünün aşağıdaki standart ve yönergelere uygun olduğunu beyan ederiz.
(МК) Изјавуваме со наша целосна одговорност дека производот е во согласност со Смерницата 2011/65/EU на Европскиот парламент и е во согласност според Советот од 9 јни за ограничување на користење на одредени опасни супстанции во електричината и електронската опрема и дека е според следните стандарди и регулативи:

EN55014-1, EN55014-2, EN60745-1, EN60745-2-1, EN61000-3-2, EN61000-3-3

2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EU

Zwolle, 01-02-2021 H.G.F. Rosberg

CEO Ferm

Ferm • Lingenstraat 6 • 8028 PM • Zwolle The Netherlands