HDM1048 - Drill Ferm - Free user manual and instructions
Find the device manual for free HDM1048 Ferm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Ferm |
| Model | HDM1048 |
| Product Type | Hammer Drill |
| Power Supply | 230 V ~ 50 Hz |
| Power | 600 W |
| No-load Speed | 0 - 3000 rpm |
| Motor | Universal motor with electronic speed control |
| Chuck | Self-tightening chuck 13 mm |
| Drilling Capacity | Steel: 13 mm, Wood: 30 mm, Concrete: 16 mm |
| Hammer Function | Yes, switchable |
| Screwdriving Function | Yes, with depth stop |
| Right/Left Rotation | Yes |
| Speed Variator | Yes, by wheel |
| Dimensions (L x W x H) | Approx. 280 x 70 x 200 mm |
| Weight | 1.5 kg |
| Handle | Ergonomic handle with non-slip coating |
| Auxiliary Handle | Included, adjustable |
| Depth Stop | Yes, included |
| Belt Clip | Not included |
| Sound Level | LpA: 85 dB(A), K=3 dB |
| Vibrations (metal drilling) | ah: 2.5 m/s², K=1.5 m/s² |
| Maintenance and Cleaning | Clean with a dry cloth after use. Do not use abrasive products. Store in a dry place. |
| Safety | Unplug before maintenance. Wear PPE (goggles, gloves). Do not drill near electrical cables. |
| Spare Parts and Repairability | Brushes available. Repair by a professional recommended. |
| General Information | Instruction manual included. 2-year warranty. Made in China. |
Frequently Asked Questions - HDM1048 Ferm
How to change the drill bit?
Turn the chuck ring counterclockwise to open the jaws. Insert the bit until it stops, then tighten by turning clockwise. Use the chuck key if necessary.
How to activate the hammer function?
Locate the mode selector (often a button or ring) and switch it to the hammer symbol. The percussion allows drilling into concrete and masonry. Disable it for wood and metal.
What is the recommended speed for drilling concrete?
Use a high speed (close to maximum) with hammer function activated. Start gently to guide the bit, then increase pressure gradually. Wear safety goggles.
How to adjust the rotation speed?
The speed is adjusted via the variable speed wheel located on the trigger or on the drill body. Turn the wheel to increase or decrease speed. Slow speed is suitable for screwdriving, fast speed for drilling.
What to do if the chuck does not tighten properly?
Check that the chuck jaws are clean and free of debris. If the chuck slips, tighten it using the key. If the problem persists, replace the chuck or consult a professional.
How to maintain the drill?
Clean the device with a dry cloth after each use. Regularly check the motor brushes and replace them if worn. Occasionally lubricate the chuck. Store in a dry place.
Can I use this drill as a screwdriver?
Yes, disable the hammer function and use a slow speed. Use a suitable screwdriver bit. The depth stop allows you to control the screw depth.
What to do in case of motor overheating?
Stop the drill immediately and let it cool down. Reduce the workload and avoid long continuous use. Check that the ventilation slots are not blocked.
How to store the drill?
Store the drill in its original carrying case or in a dry, dust-free place. Remove the bit and clean it before storing. Avoid extreme temperatures.
Does the drill come with accessories?
The drill is usually supplied with an auxiliary handle, a depth stop, and a chuck key. Drill bits are not included. Refer to the manual for the full list.
User questions about HDM1048 Ferm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual HDM1048 - Ferm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDM1048 by Ferm.
USER MANUAL HDM1048 Ferm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ferm
Model : HDM1048
Category : Drill