BBA 2785 - Bread maker CLATRONIC - Free user manual and instructions

USER MANUAL BBA 2785 CLATRONIC

Operating Instructions Congratulations for having purchased the BBA 2785 model Bread Baking Machine. The appliance is completely automatic and extremely user-friendly. You will also find the recipes for the following specialties: • • •

White bread, dark leavened bread, light wheat and rye bread, whole bread; Dough which needs to be further worked; Jam which the bread machine can cook.

Safety Instructions Read all the instructions in the manual and follow them carefully! 1. Do not touch any of the appliance’s hot surfaces. Use oven cloths! The bread baking machine is very hot after baking. 2. Never dip the connection cable or the appliance in water or any other liquid. 3. Keep your eye on the appliance when children are around! Unplug the appliance if it is not being used and before cleaning it. Before removing single parts of the appliance let it cool down. 4. Never use the appliance with a defective connection cable, after malfunctions or if the appliance happens to be damaged in any way whatsoever! In these cases have the Customer Service check and repair it if necessary. Never try to repair it yourself. The warranty is void in this latter case. 5. The use of accessories not recommended by the manufacturer can cause damage. Use the appliance exclusively for the envisaged purpose. 6. Lay the appliance firmly on the counter to avoid that it falls off during the kneading of a thick dough. This is especially important when using the preprogram function and the appliance is not being watched. In the case of extremely smooth counters the appliance should be placed on a thin rubber mat to avoid any risk of falling. 7. The bread baking machine must be kept at a distance of at least 10 cm from other objects when it is working. The appliance can be used only indoors. 8. Make sure that the power cable does not touch any hot surface and that it does not hang over a table edge thus avoiding, for example, that children may grab it. 9. Never place the appliance either on or near a gas or electrical stovetop or a hot oven. 10. Pay great attention when handling the appliance especially when it is full of hot liquids (marmalades)! 11. Never remove the baking tin while the appliance is still working! 12.Do not fill the baking tin with an amount of ingredients greater than that required by the recipe! If this should happen, the bread will not bake evenly or the dough will overflow. Follow the instructions carefully. 13. Metal foils or other materials must not be put inside the appliance as these may cause a fire or a short circuit! 14.Never the cover the appliance with towels or other materials during use! The heat and steam must be free to escape. Danger of fire if the appliance is covered with flammable materials or comes in contact with curtains, etc. 15. Before trying to bake a given type of bread overnight, try the recipe first while keeping an eye on it to make sure that the doses of the ingredients are correct, that the dough is not too thick or thin or that the quantity is too much and hence risks overflowing. 16.The appliance has a heat-insulated „cool-touch“ housing. The metal parts become hot during use. Leave the toaster to cool before putting it away. The manufacturer is not liable if this appliance is used for commercial purposes or in any way or manner that does not comply with the instructions herein provided.

D C G A B E H K F L I A B C D E Cover, removable Handle Viewing panel Vent Baking tin

Kneading pegs Baking compartment Control Panel Stainless steel casing Lateral vent

L ON/OFF function switch Accessories: 1 measuring spoon, 1 measuring beaker

it shows information on the desired program number, baking level and bread weight (indicated by an arrow and the time). To start and stop the program To set the preprogram timer

4 COLOR key 5 DOUGH QUANTITY key

To set the desired level of browning To set 3 weight levels as described below to select the programs described in the „bread baking machine programs“

15.08.2003 10:07 Uhr

Description of the Control Panel Insert the plug into a properly installed 230V/50Hz protective contact socket. 1. DISPLAY NORMAL SETTING This displays signals when the appliance is ready for use. It corresponds to the normal program. “1 3:25” appears on the display. The “1” specifies which program has been chosen and the “3:25” is the length of the program. The position of two markings shows the degree of browning that has been selected and the weight. The basic setting after switching the appliance on is: “superior weight” and “medium browning level”. During operation the course of the program can be read on the display. As the program proceeds the digits of the set time will decrease progressively. Other parts of the programme, such as the timer, heating, kneading, pause, rising, baking, keeping warm and programme end are also shown in the display. 2. START/STOP key To start and stop the program. As soon as the START/STOP key is pressed, the points of the time value start to blink. Use the START/STOP key to stop the program in any moment. Keep the key pressed until a signal beep is heard. The starting position of the aforementioned start program appears on the screen. If you want to use a different programme, please select this using the AUSWAHL button before starting the programme. 3. TIME keys The following programs can be started with the timer: NORMAL (1), WHITE BREAD (2), SWEET BREAD (4), WHOLEMEAL (3), DOUGH (9), BROWN BREAD (8) and BAGEL DOUGH (10). The RAPID (7) and ULTRA RAPID (6) programs can not be started with the timer. The hours and minutes after which the preparation should be started need to be added to the relevant basic time for the specific program plus 1 hour of warming time (after the end of the baking process). The maximum time delay is 12 hours and 58 minutes per programme. Example: It is 8.30 p.m. and the bread must be ready the next morning by 7.00 a.m., i.e. in 10 hours and 30 minutes. Press the TIME key until 10.30 appears, that is to say the time between now (8.30 p.m.) and when the bread must be ready. When working with the timing function never use perishable ingredients such as milk, eggs, fruit, yogurt, onions, etc.! 4. COLOR key The desired browning level is set with this key: LIGHT – MEDIUM – DARK. 5. DOUGH QUANTITY key It provides for the following settings in the various programs (see table): LEVEL I = for small bread weights up to 500 g. LEVEL II = for medium bread weights up to 700 g. LEVEL III = for large bread weights up to 900 g. In the recipes you will find our recommended quantities. 6. SELECTION key Use this menu key to run one of the available programs described in detail in the „Bread Baking Machine Program Phases“ table. Use the programs for the following specialties: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

NORMAL WHITE BREAD WHOLEMEAL SWEET BREAD ULTRA RAPID 700 G ULTRA RAPID 900 G RAPID BROWN BREAD DOUGH BAGEL DOUGH MARMALADE BAKING For white and wheat and rye bread. This program is used the most. For the preparation of particularly light white bread For wholemeal bread for preparing sweet yeast dough, for example for the kneading and baking of bread loafs of up to 700 g. for the kneading and baking of bread loafs of up to 900 g. for faster preparation of white and mixed wheat and rye bread for preparing brown bread, pumpernickel etc For the preparation of dough for preparing bagel dough (bagel is an American "roll") To cook marmalades and jams To brown bread or cakes

Bread Baking Machine Functions Buzzer function The buzzer goes off: • When pressing all the program keys; • During the second kneading cycle of the NORMAL, WHOLEMEAL, SWEET BREAD, programs to signal that the cereals, fruit, nuts or other ingredients can be added. • When the end of the program is reached. During the warming phase at the end of the baking procedure the acoustic signal rings several times. Repeat function If there is a brief power cut of up to approximately five minutes the programme position is stored and the machine can continue from this position when power is restored. This is possible only if the program was stopped before the kneading phase was reached. Otherwise you will have to start from the beginning! Safety functions If the temperature of the appliance is still too high (more than 40°C) for a new program after using the appliance previously, E 01 will appear on the display when pressing start again and an acoustic signal is given. If this is the case, press the START/STOP key until the E 01 message is deleted and the basic setting appears on the display. Remove the container and wait until the appliance has cooled. The BAKING program can be started immediately even when the appliance is still hot.

Bread Baking Machine Program phases Insert the baking tin Place the non-stick coated baking tin exactly in the middle of the base inside the baking space. When the baking tin is pressed lightly in the centre the fixing device locks into place. To remove the baking tin pull with medium force on its carrying handle. Caution! The handle is hot after baking. Please use an oven cloth or similar item. Put in the ingredients The ingredients must be put into the baking tin in the order specified in the relevant recipe. Select the program Turn the function selector switch (L) on the back of the device to ON. Select the desired program with the SELECTION key. Choose the level corresponding to the selected program. Then select the desired degree of browning. Use the TIME key to set the time when the program is to be started. Press the START/STOP key. Mix and knead the dough The bread baking machine mixes and kneads the automatically until it reaches the right consistency. Leave the dough to rise After the last kneading cycle the bread baking machine is heated to the optimal temperature for the rising of the dough. Baking The bread baking machine sets the baking temperature and time automatically. If the bread is too light at the end of the baling program, use the BAKING program to let it brown more. To do so, press the START/STOP key, then select the BAKING program and start. When the desired degree of baking has been reached, stop the process. Warming Once the baking is over, the buzzer goes off to signal that the bread or specialty can be removed. The 1-hour warming time starts immediately. End of the program phases After the programme has finished, please switch the device off by turning the function switch (L) to OFF. Now remove the baking tin using an oven cloth, turn it over and - if the loaf does not fall out onto the grid immediately - turn the kneading mechanism backwards and forwards a few times from underneath until the bread falls out. If the kneading hook becomes stuck in the bread, move it slightly upwards so that you can see the position of

the propeller. Then use a knife to cut along the propeller. You can then easily remove the kneading hook. Baking can be stopped at any time by pressing the STAR/STOP button. At the same time a sound is heard and control lamp goes off.

Heating the appliance to make the dough rise The heating is switched on only if the room temperature is lower than 25°C. If the room temperature is above 25°C the ingredients are already at the right temperature and there is no need for pre-heating. For the first and second rising the room temperature must be above 25°C or high enough to make the dough rise without extra heating.

Cleaning and Maintenance • •

Before using the appliance for the first time wash the bread baking machine’s baking tin (never dip in water) with a mild detergent and clean the kneading pegs. It is highly recommended to coat the new baking tin and the kneading pegs with heat resistant grease before using them for the first time and let them heat in the oven for about 10 minutes at 160°C. Once these have cooled down clean away (polish) the grease from the baking tin with a sheet of paper towel. This operation is to be performed to protect the nonstick coating. This operation can be repeated from time to time. After use always leave the appliance to cool before cleaning it or putting it away. It takes about half an hour for the appliance to cool and to be ready again for baking and kneading. Before cleaning pull out the plug and leave the appliance to cool. Use a mild detergent. Never use chemical cleaning agents, gasoline, oven cleaners or any detergent that can scratch or ruin the coating. Remove all the ingredients and crumbs from the lid, casing and baking compartment with a moist towel. Never dip the appliance in water nor fill the baking compartment with water! For easy cleaning the lid can be removed by positioning it vertically and pulling it out. Wipe the outside of the baking tin with a moist towel. The inside of the tin can be washed with some detergent liquid. Do not leave it too long dipped in water. Both the kneading pegs and drive shafts need to be cleaned immediately after use. If the kneading pegs remain in the tin, it becomes difficult to remove them afterwards. In this case fill the container with warm water and leave it to rest for 30 minutes. Then remove the kneading pegs. The baking tin has a nonstick coating. Do not use metal objects that can scratch the surface when cleaning it. It is normal that the color of the coating changes over the course of time. This change does not alter its effectiveness in any way whatsoever. Before putting the appliance away for storage, make sure that it is perfectly cool, clean and dry. Put the appliance away with the lid closed.

Questions & Answers on Baking •

The bread sticks to the container after baking Leave the bread to cool for about 10 minutes after baking – turn the container upside down. If necessary move the kneading peg shaft back and forth. Grease the kneading pegs before baking.

How do you avoid the forming of holes in the bread owing to the presence of the kneading pegs You can remove the kneading pegs with your fingers covered with flour before leaving the dough to rise for the last time. Depending on the program the display must still show a total time of approx. 1:30 hours. If do not wish to do so, use the hook after baking. If you proceed with caution, you can avoid the forming of a large hole.

The dough spills over when it is left to rise. This happens in particular when wheat flour is used owing its greater content of gluten. Remedy: a) Reduce the amount of flour and adjust the amounts of the other ingredients. When the bread is ready, it will still have a large volume. b) Spread a tablespoon of heated liquefied margarine on the flour.

The bread rises and spills over anyway a) If a V-shaped ditch forms in the middle of the bread, the flour does not have enough gluten. This means that the wheat contains too little protein (it happens during especially rainy summers) or that the flour is too moist. Remedy: add one tablespoon of wheat gluten for 500 g of wheat. b) If the bread has a funnel shape in the middle, the possible cause can be one of the following: – the water temperature was too high; – too much water was used; 21

– the flour was poor in gluten. - Draft caused by opening the lid while baking. When can the lid of the bread baking machine be opened during the baking? Generally speaking, it is always possible while the kneading is underway. During this phase small quantities of flour or liquid can still be added. If the bread must have a particular aspect after baking, proceed as follows: before the last rising phase (Depending on the program the display must still amount to a total time of approx. 1:30 hours.) open the lid with caution and shortly and carve the bread crust while it is forming with a sharp pre-heated knife, scatter cereals on it or spread a mixture of potato flour and water on the crust to give it a glossy finish. This is the last time that the lid can be opened, otherwise the bread will go down in the middle.

What do the type numbers for flour mean? The lower the type number, the less roughage the flour contains and the lighter it will be.

What is wholemeal flour? Wholemeal flour is made of all types of cereals including wheat. The term “wholemeal” means that the flour was ground from whole grain and hence it has greater contents of roughage thus making the wheat wholemeal flour darker. However, the use of wholemeal flour does not make the bread darker as it is widely believed.

What must be done when using rye flour? Rye flour does not contain any gluten and the bread hardly rises. In order to make it easily digestible a rye wholemeal bread with leaven is to be made. The dough will rise only if one part of 550 type flour is added to every four parts of rye flour without gluten.

What is the gluten in flour? The higher the type number, the lower the gluten contents of the flour are and the less the dough will rise. The highest quantity of gluten is contained in 550 type flour.

How many different flour types are there and how are they used? a) Corn, rice and potato flour are suitable for people allergic to gluten or for those who suffer from sprue or celiac disease. See the relevant recipes in the operating instructions. b) Spelt flour is very expensive, but it is free from chemical additives because spelt grows on very pool soil and requires no fertilizers. Spelt flour is especially suitable for allergic people. It can be used in all those recipes described in the operating instructions requiring flour types 405, 550 or 1050. c) Millet flour is especially suitable for people suffering from many allergies. It can be used in all recipes requiring flour types 405, 550 or 1050 as described in the operating instructions. d) Durum wheat flour is suitable for baguettes thanks to its consistency and it can be replaced with durum wheat semolina.

How can fresh bread be made easier to digest? If a mashed boiled potato is added to the flour and kneaded in the dough the fresh bread is easier to digest.

What doses of rising agent should be used? For yeast and leaven which must be bought in different quantities follow the producer’s instructions on the package and adapt the quantity to the amount of flour used.

What can be done if the bread tastes of yeast? a) Reduce the amount of sugar if sugar is being used. The bread will be slightly lighter. b) Add 1,5 tablespoon of vinegar for a small bread loaf and 2 tablespoons for a large loaf to the water. c) Use buttermilk or kefir instead of water. This is possible for all the recipes and it is recommended for the freshness of the bread.

Why does the bread made in an oven taste different from the bread made with the bread baking machine? It depends on the different degree of humidity: the bread is baked drier in the oven owing to the larger baking space, while the bread made in the machine is moister.

Questions & Answers on Bread Baking Machines Problem

Smoke comes out of the baking compartment or of the vents

The ingredients stick to the baking compartment or on the outside of the baking tin

Pull out the plug and clean the outside of the baking tin or the baking compartment.

The bread goes down in the middle and is moist on the bottom.

The bread is left too long in the tin after baking and warming.

Take the bread out of the baking tin before the warming function is over.

It is difficult to take the bread out of the baking tin.

The bottom of the loaf is stuck to the kneading peg.

Clean the kneading peg and shaft after the baking. If necessary, fill the baking tin with warm water for 30 minutes. Then the kneading pegs can be easily removed and cleaned.

The ingredients are not mixed or the bread is not baked correctly.

Incorrect program setting.

Check the selected menu and the other settings.

The START/STOPP key was touched while the machine was working.

Do not use the ingredients and start over again.

The lid opened several timers while the machine was working.

The lid is to be opened only if the time left on the display is more than 1:30 hours (only for programmes „1, 2, 3, 4“). Make sure that lid was closed well after being opened.

Long blackout while the machine was working.

Do not use the ingredients and start over again.

The rotation of the kneading peg is blocked.

Check that the kneading peg are blocked by grains, etc. Pull out the baking tin and check whether the drivers turn. If this is not the case, send the appliance to the customer service.

The appliance does not start. The time acoustic signal goes off. The display shows E 01.

The appliance is still hot after the previous baking procedure.

Press the START/STOPP button until the normal programme appears. Pull out the plug. Take out the baking tin and leave it to cool at room temperature. Then insert the plug and start again.

„EEE“ or a similar signal appears on the display.

Program or electronic error.

Start the test run by pulling out the plug, keeping the menu key pressed and inserting the plug again. Release the key. The menu performs a test run. Unplug again and then plug in again. The normal program should appear on the display. If this is not the case, send the appliance to the Customer Service.

Error with the prescriptions Problem

The bread rises too fast

– too much yeast, too much flour, not enough salt – or several of these causes

The bread does not rise at all or not enough

– no yeast at all or too little – old or stale yeast – liquid too hot – the yeast has come into contact with the liquid – wrong flour type or stale flour – too much or not enough liquid – not enough sugar

a/b e c d e a/b/g a/b

The dough rises too much and spills over the baking tin

– if the water is too soft the yeast ferments more – too much milk affects the fermentation of the yeast

The bread goes down in the middle

– The dough volume is larger than the tin and the bread goes down. – The fermentation is too short or too fast owing to the excessive temperature of the water or the baking chamber or to the excessive moistness. Warm liquids make the dough rise too quickly and loaf fall in before baking. – No salt or not enough sugar – Too much liquid

Heavy, lumpy structure

– Too much flour or not enough liquid – Not enough yeast or sugar – Too much fruit, wholemeal or of one of the other ingredients – Old or stale flour.

The bread is not baked in the center

– Too much or not enough liquid – Too much humidity – Recipes with moist ingredients, e.g. yogurt

Open or coarse structure or too many holes

– Too much water – No salt – Great humidity, water too hot – Too much liquid

Mushroom-like, unbaked surface

– Bread volume too big for the tin – Too much flour, especially for white bread – Too much yeast or not enough salt – Too much sugar – Sweet ingredients besides the sugar

The slices are uneven or there are clumps in the middle

– Bread not cooled enough (the vapor has not escaped)

Flour deposits on the bread crust

– The flour was not worked well on the sides during the kneading.

Solutions for the problems a) Measure the ingredients correctly. b) Adjust the ingredient doses and check that all the ingredients have been added. c) Use another liquid or leave it to cool at room temperature. Add the ingredients specified in the recipe in the right order. Make a small ditch in the middle of the flour and put in the crumbled yeast or the dry yeast. Avoid letting the yeast and the liquid come into direct contact. d) Use only fresh and correctly stored ingredients. e) Reduce the total amount of the ingredients, do not use more than the specified amount of flour. Reduce all the ingredients by 1/3. f) Correct the amount of liquid. If ingredients containing water are used, the dose of the liquid to be added must be duly reduced. g) In case of very humid weather remove 1-2 tablespoons of water. 24

15.08.2003 10:07 Uhr

h) In case of warm weather do not use the timing function. Use cold liquids. i) Take the bread out of the tin immediately after baking and leave it on the grid to cool for at least 15 minutes before cutting it. j) Reduce the amount of yeast or of all the ingredient doses by 1/4. k) Never grease the tin! l) Add a tablespoon of wheat gluten to the dough.

Remarks on the Recipes 1. Ingredients Since each ingredient plays a specific role for the successful baking of the bread, the measuring is just as important as the order in which the ingredients are added. • • • • • • • •

The most important ingredients like the liquid, flour, salt, sugar and yeast (either dry or fresh yeast can be used) affect the successful outcome of the preparation of the dough and the bread. Always use the right quantities in the right proportion. Use lukewarm ingredients if the dough needs to be prepared immediately. If you wish to set the program phase timing function, it is advisable to use cold ingredients to avoid that the yeast starts to rise too early. Margarine, butter and milk affect the flavor of the bread. Sugar can be reduced by 20% to make the crust lighter and thinner without affecting the successful outcome of the baking. If you prefer a softer and lighter crust replace the sugar with honey. Gluten which is produced in the flour during the kneading provides for the structure of the bread. The ideal flour mixture is composed of 40% wholemeal flour and 60% of white flour. If you would like to bake wholemeal bread with a low proportion of wheat gluten it may also be necessary to knead the bread by hand. See also the section "Questions on Baking". If you wish to add cereals grains, leave them to soak overnight. Reduce the quantity of flour and the liquid (up to 1/5 less). Leaven is indispensable with rye flour. It contains milk and acetobacteria that make the bread lighter and ferment thoroughly. You can make your own leaven but it takes time. For this reason concentrated leaven powder is used in the recipes below. The powder is sold in 15g packets (for 1 kg of flour). Follow the instructions given in the recipes (1/2, 3/4 or 1 packet). If less leaven that requested is used the bread will crumble. If leaven powders with a different concentration (100 g packet for 1 kg of flour) are used, the quantity of flour must be reduced by 80 kg for a 1 kg of flour. Liquid leaven sold in bags is also available and it is suitable for use. Follow the doses specified on the package. Fill the measuring beaker with the liquid leaven and top it up with the other liquid ingredients in the right doses as specified in the recipe. Wheat leaven which often comes dry improves the workability of the dough, the freshness and the taste. It is milder that rye leaven. Use either the NORMAL or WHOLEMEAL program when baking leavened bread. Baking ferment can used to replace the leaven. The only difference is in the taste. It is fit to be used in the bread baking machine. Wheat bran is added to the dough if you want particularly light bread rich in roughage. Use one tablespoon for 500 g of flour and increase the quantity of liquid by 1/2 tablespoon. Wheat gluten is a natural additive obtained from wheat proteins. It makes the bread lighter and more voluminous. The bread falls in more rarely and it is more easily digestible. The effect can be easily appreciated when baking wholemeal and other bakery products made of home-milled flour. The black malt used in some recipes is dark-roasted barley malt. It is used to obtain a darker bread crust and soft part (e.g. brown bread). Rye malt is also suitable but it is not as dark. You can find this malt in whole food shops. Pure lecithin powder is a natural emulsifier that improves the volume of the bread, makes the soft part softer and lighter and keeps it fresh longer.

2. Adapting the doses If the doses need to be increased or reduced, make sure that the proportions of the original recipe are maintained. To obtain a perfect result, the basic rules below for the adapting of the ingredient doses must be following: •

Liquids/flour: the dough ought to be soft (not too soft) and easy to knead without becoming stringy. A ball can be obtained by kneading it lightly. This is not the case with heavy doughs like rye wholemeal or cereal bread. Check the dough five minutes after the first kneading. If it is too moist, add some flour until the dough has reached the right consistency. If the dough is too dry add a spoonful of water at a time during the kneading. Replacing liquids: When using ingredients containing liquids in a recipe (e.g. curd cheese, yogurt, etc.), the required amount of liquid must be reduced. When using eggs beat them in the measuring beaker and fill it with the other required liquid up to the envisaged amount. 25

15.08.2003 10:07 Uhr

If you are living in a place located at a high altitude (more than 750 m) the dough rises faster. The yeast can be reduced in these cases by 1/4 to 1/2 of a teaspoon to proportionally reduce its rising. The same is true of places with particularly soft water. 3. Adding and measuring the ingredients and quantities • • • •

Always put in first the liquid and the yeast at the end. To avoid that the yeast acts too fast (in particular when using the timing function), contact between the yeast and the liquid must be avoided. When measuring use the same measuring units, that is to say use either the measuring spoon supplied with the bread baking machine or a spoon used in your home when the recipes require doses measured in tablespoons and teaspoons. The measures in grams must be weighed precisely. For the millimeter indications you can use the supplied measuring beaker which has a graduated scale of 30 to 300 ml. The abbreviations in the recipes mean: EL = level tablespoonful (or large measuring spoon) TL = level teaspoonful (or small measuring spoon) g = grams ml = milliliter Packet = 7g dry yeast for 500 g of flour – corresponds to 20 g of fresh yeast 1 OZ (Unze) = 28,35 g Fruit, nuts or cereal ingredients. If you wish to add other ingredients, you can do so in specific programs (see the “Program Phase Timing” table), when you here the acoustic signal. If you add the ingredients too early, they will be crushed during the kneading.

4. Recipes for the BBA 2785 type bread baking machine The following recipes are for various bread sizes. The total weight of the ingredients should not exceed 900 grams. If no levels are specified in the recipe, it means that they are not envisaged in the proposed programs and that both small and large quantities can be used. 5. Bread weights and volumes • • • •

In the following recipes you will find exact indications regarding the bread weight. You will see that the weight of pure white bread is less than that of wholemeal bread. This depends on the fact that white flour raises more and hence limits need to be posed. Despite the precise weight indications there may be slight differences. The actual bread weight depends much on the air humidity of the room at the moment of the preparation. All breads with a substantial portion of wheat reach a large volume and exceed the container edge after the last rising in the case of the highest weight class. But the bread does not spill over. The part of the bread outside the tin is more easily browned compared to the bread in the tin. When the RAPID or ULTRA RAPID program is suggested for sweetbreads, you can use the ingredients in smaller quantities also for the SWEET BREAD program to make a lighter bread.

The result of the baking depends on the on-site conditions (soft water – high air humidity – high altitude – consistency of the ingredients, etc.). Therefore, the recipe indications are reference points which can be adapted. If one recipe or another does not go straight the first time, do not let yourself be discouraged. Try to find the cause and try it again by varying the proportions. If the bread is too pale after baking, you can leave it to brown with the baking program. It is recommended to bake a test bread before actually setting the timing function for use overnight so that you can make the necessary changes if necessary.

Bread weight approx. 900 g Water or milk 275 ml Margarine or butter 30 g 1/2 tsp Salt Sugar 1 tbsp 405 type flour 500 g 3/4 packet Dry yeast Raisins 75g Crushed walnuts 40g Program: „NORMAL“ Add currants and nuts after the acoustic signal or after kneading has been completed the second time.

Bread weight approx. 700 g 1 /2 packet Dried leaven* Water 350 ml 1/2 tsp Bread spices Salt 1 tsp Rye flour 250 g 1050 type flour 250 g Yeast 1 packet Program: „NORMAL“ * Dried leaven is concentrated and it comes in 15g packets.

Dough Preparation French Baguette

Bread weight approx. 900 g Water 375 ml Dried wheat leaven 25 g Salt 1 tsp Sugar 1 tsp 550 type flour 525 g Durum wheat flour 75 g 3/4 packet Dry yeast Program: „DOUGH“ • Divide the dough when ready into 2 – 4 parts, form long loaf shapes and leave them to rest for 30 – 40 minutes. Make a series of diagonal cuts on the top surface and put the bread to bake in the oven.

Components 4 Pizzas Water 300 ml Salt 11/2 tsp Olive oil 4 tbsp 405 type flour 600 g Sugar 1 tsp Dry yeast 1 packet Program „DOUGH“ • Spread the dough, make round forms and leave them to rest for 10 minutes. • Spread pizza sauce on the dough and the desired filling. • Bake for 20 minutes.

Fruits 500 g 2:1 jellifying sugar 250 g Lemon juice 1 tbsp Program „MARMALADE“ • If necessary, remove the stones from the fruit beforehand and then cut the fruit into small pieces. • The residual sugar can be removed from the side of the vessel with a rubber spatula. • The following fruits are particularly suited for these recipes: raspberries, blackberries, blueberries or a mixture of these three. • Then fill the jam into clean jars, close the lid and then place the jam for approximately 10 minutes on the lid (to ensure that the lid is tightly sealed).

Oranges 400 g Lemons 100 g 2:1 jellifying sugar 250 g Program „MARMALADE“ • Please peel the fruit and cut into small cubes or strips. • The residual sugar can be removed from the side of the vessel with a rubber spatula. In order to fill the jam into the jars please proceed as described under point 4 (jam recipe) above. Note: The recipes should be adapted to the appropriate weight.

This appliance conforms with the CE directives for radio interference suppression and low-voltage safety and has been built to meet current safety requirements. Subject to technical changes without prior notice!

Defects to the accessories do not entitle to the change of the appliance. These will be replaced free of charge. In this case do not send back the appliance. Just order the faulty accessory! Broken glass parts are replaced at the expense of the owner!

Neither defects to consumables and wearing parts (e.g. motor pistons, kneading hooks, drive belts, spare remote controls, spare toothbrushes, saw blades, etc.) nor the cleaning, maintenance or change of wearing parts fall under this warranty and hence are subject to payment of costs!

We undertake to guarantee the appliance sold by our company for 24 months as of the date of purchase (cash receipt). Within the guarantee period we rectify faults to the machine free of charge which result from material or manufacturing faults, either by repairing the machine or, or our discretion, by replacement. Any such repair or replacement associated with the guarantee shall not cause the guarantee period to be extended, nor be deemed to be the start of a new guarantee period! Proof for the warranty is provided by the purchase document. The replacement and repair will not be performed free of charge without this proof of purchase.

The warranty is terminated in case of handling on the part of Third parties.

After the warranty Once the warranty has expired, repairs can be carried out by specialized technicians or repair services against the payment of the service.

Should the warranty be valid, please consign the complete appliance in its original packing together with the cash receipt to your local dealer.