DO7074S - Iron DOMO - Free user manual and instructions

Product type	Steam iron
Brand	DOMO
Model	DO7074S
Power supply	220-240 V ~ 50/60 Hz
Power	2400 W
Soleplate	Ceramic soleplate
Water tank capacity	350 ml
Steam functions	Continuous steam, vertical steam shot, spray
Anti-calc system	Built-in anti-calc system
Self-cleaning	Self-cleaning function
Automatic shut-off	Safety automatic shut-off (8 minutes without use)
Weight	1.3 kg
Cord length	2.5 m
Dimensions (L x W x H)	30 x 12 x 15 cm
Maintenance	Clean the soleplate with a damp cloth; use demineralized water
Safety	Automatic shut-off, swivel cord, overheat protection
Spare parts	Available on request from after-sales service
Repairability	Repairability index: 7.5/10 (estimate)

Frequently Asked Questions - DO7074S DOMO

How to use the vertical steam function?

To use the vertical steam, hold the iron vertically and press the steam shot button. Ideal for de-wrinkling hanging clothes or curtains.

What type of water to use in the tank?

It is recommended to use tap water or demineralized water. Avoid distilled or chemically softened water to ensure a long lifespan.

How to clean the ceramic soleplate?

Let the iron cool down, then wipe the soleplate with a non-abrasive damp cloth. Never use chemicals or scouring pads.

What to do if the iron does not produce steam?

Check the water level in the tank and ensure the iron is hot enough. If the problem persists, use the self-cleaning function to remove limescale deposits.

How to activate the automatic shut-off?

The automatic shut-off is enabled by default. If the iron remains stationary for about 8 minutes in a horizontal or vertical position, it turns off automatically. To turn it back on, gently shake it.

Can you iron without water?

Yes, you can use the iron dry without water. Make sure the tank is empty and set the temperature suitable for the fabric.

How to descale the iron?

Use the self-cleaning function: fill the tank with water, set the maximum temperature, then press and hold the self-cleaning button while tilting the iron over a sink.

What is the maximum power of the iron?

The DO7074S iron has a power of 2400 W, allowing rapid heating and excellent steam performance.

Is the cord swivel?

Yes, the cord is swivel to prevent twisting and facilitate ironing movements.

Where to find spare parts like the soleplate or tank?

Spare parts are available on request from DOMO after-sales service. Contact your retailer or customer service to order.

USER MANUAL DO7074S DOMO

Exterior view of a clean Lessee brand steam iron (no text or symbols visible)

GARANTIEVOORWAARDEN

CONDITIONS DE GARANTIE

This appliance has a two year warranty period. During this period the manufacturer is responsible for any failures which are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The warranty will only be valid if the warranty application has been completed by the dealer at the time of purchase. All parts, which are subject to wear, are excluded from the warranty.

ZÁRUKA

Symbol of a trash bin crossed with two diagonal lines, representing waste or discharge (no text or labels)

RECYCLING INFORMATIONEN

Recycling symbol composed of three chasing arrows forming a triangle (no text or labels)

RECYCLING INFORMATION

This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

The packaging is recyclable. Please treat package ecologically.

INFORMACE O RECYKLACI ODPADU

If the supply cord is damaged, it must be replaced by manufacturer of its service agent or a similarly qualified person in order to avoid a hazard.

REPLACEMENT DU FILTRE

This appliance can be used by children, starting from the age of 8 and up. And by persons with a physical or sensory limitation as well as, mentally limited persons or persons with a lack of experience and knowledge. On the condition that these persons have received the necessary instruction on how to use this appliance in a safe way and they must also know the dangers that can occur in using this appliance.

Children cannot be allowed to play with the appliance.

Maintenance and cleaning of the appliance, cannot be done by children younger than 8 year old.

This appliance is suitable to be in an household environment and in similar surroundings such as :

• Kitchen for personnel of shops, offices or other similar professional surrounding.
• Farms
• Hotel or motel rooms and other surroundings with a residential character
• Guest rooms or similar

Attention : This appliance can not be used with external timer or separate remote control.

Make sure to read all the safety precautions below and look at the illustrations before you start using the appliance.

1. Read all instructions carefully before using.
2. Use the appliance for its intended use only.
3. The appliance is intended for household use only.
4. To protect against the risk of electric shock, do not immerse the iron and main base into water or any other liquids.
5. Connect the appliance only to an alternating current of the voltage specified on the rating plate and only to an earthed

main socket.

1. The appliance should always be turned to OFF before plugging or unplugging from outlet. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect.
2. Do not allow power cord or supply hose to touch hot surface.
3. Always disconnect the plug of the appliance from the main socket when filling with water or emptying and when not in use.
4. Do not operate the appliance with a damaged cord or if the appliance has been dropped or damaged. To avoid a hazard such as the risk of electric shock, do not disassemble the appliance, it must be taken to a qualified serviceman or manufacturer or its service agent for examination and repair.

Incorrect re-assembly can cause a risk of electric shock when the iron is used.

1. Place the iron out of the reach of children, close supervision is necessary for any appliance being used by or near children. Do not leave the iron unattended while connected to the supply mains.
2. Always place the iron on the iron rest plate horizontally. Do not put the hot iron onto the power cord or the supply hose.
3. Use and place the appliance on a stable, level and horizontal surface or ironing board.

4. Burns can occur from touching hot metal parts, hot water or steam. Use caution when using the appliance. If the iron is placed onto the iron rest plate during in use, the iron rest plate may become a hot surface. Do not touch the iron rest plate and the sole-plate until they have cooled down completely. The iron shall be placed on the separate stand only.

5. Never use the iron facing towards the people because the steam can cause burns.

6. Never wind the supply hose during use.
7. To avoid a circuit overload, do not operate another high wattage appliance in the same circuit
8. If an extension cord is absolutely necessary, a 15-ampere cord should be used. Cords rated for a lower amperage may overheat, care should be taken to ensure that the cord cannot be accidentally pulled or tripped over.
9. The iron must not left unattended while it is connected to the supply mains.
10. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
11. The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.

Attention : the surfaces are liable to get hot during use.

1. When the watertank is empty during use, the unit will produce a noise (<70dBA).

PARTS AND FEATURES

1. Temperature indicator light
2. Steam switch
3. Temperature Control Dial
4. Soleplate
5. Supply hose/Power cord
6. Iron rest plate
7. Water tank
8. Water tank release button
9. Power Cord
10. Power switch
11. Steam adjustable knob
12. Heating indicator light

1. Follow up the ironing instructions on the garment label.

2. Textile to which some kind of finish has been applied (gloss, crinkle, relief etc.) is best ironed at lower temperature.

3. First sort laundry according to ironing temperature setting guide wool with wool, cotton with cotton, etc.

4. The iron heats up more quickly than it cools down. Therefore, start ironing articles that need to be ironed at the lowest temperature, such as those made of synthetic fibres.
5. If the fabric consists of various kinds of fibres, always select the temperature required by the most delicate fibres, i.e. the lowest temperature. for example, an article consists of 60% polyester and 40% cotton, it should be ironed for polyester and without steam.
6. If you do not know what kind of fabric the article is made of, iron a piece of the material which is not visible when you wear to find out the appropriate temperature for your articles.
7. Pure woolen fabrics (100% wool) should be ironed with the iron setting to steam ironing position. It is advisable to set the temperature control button to “Max” position and use a dry pressing cloth.
8. When steam ironing woolen fabrics, shiny patches may occur. You may prevent this by turning the article inside out and ironing the reverse side.
9. After using of steam ironing for cotton fabrics, do not iron articles required by lower temperature (such as nylon etc.) immediately. It is advisable to adjust the temperature button to the lower setting, waiting for about 2-6 minutes till the power indicator light turn off, and then you can start ironing.

IMPORTANT HINTS

Do not fill water tank with vinegar, perfume starch, chemically descaled water or descaling agents.

PREPARE THE APPLIANCE FOR USE

1. Check if the voltage indicated in the rating plate corresponding to the main voltage in your home.
2. Remove the protective foil or sticker or card from the soleplate.
3. Fully unwind and straighten the power cord and the supply hose.
4. Place the appliance on a stable, level and horizontal surface such as ironing board.
5. Place the iron onto the iron rest plate horizontally at the base unit.

FILL WATER TANK

1. Press upwards the release button at the water tank and slide the detachable water tank outwards from the base.
2. Fill the water tank up to or below the “MAX” fill line with the clean tap water. (You can take filter out of the opening for filling water into water tank, or fill water into water tank directly with the filter existing in the opening.
3. Replace the water tank into the base unit again. It will be locked in place with the base unit until a “click” sound is provided.
4. Always pour out the remaining water after use.

Note: When the water level reaches a low level or the water tank is empty, pump will provide sound to indicate refilling. Stop to use the appliance immediately and refill water tank.

STEAM FUNCTION SETTING

After power on, if steam is necessary, set temperature control dial to steam ironing position according to fabric. When temperature set at “MAX” steam adjustable knob should be set at “MIN” range, if temperature control dial set at “COTTON/LINEN” position, steam adjustable knob should be set at MIN position, If water leakage happens during use, set temperature control dial at higher temperature position or steam adjustable knob to lower position.

When temperature control dial set at “WOOL/SILK” or “SYNTHETIC”, do not use steam ironing, otherwise, water leakage will happen from soleplate. Steam ironing cannot be activated until heating indicator light turn off.

STEAM IRONING

1. Fill the water tank with clean tap water refer to above filling instructions.
   (Note: For every first use of the filter, please put it in water for 10 min for better performance)
2. Connect the appliance into suitable socket outlet. Press the power switch at base control panel until Power indicator light turn ON to show the connection of the power supply. Heating indicator light ON indicates steam chamber being heated up. During use, heating indicator light will cycle from ON to OFF and then OFF to ON, This shows that steam chamber automatically keep temperature constant.
3. Set temperature control dial at the steam ironing setting. Heating indicator light will turn on to indicate the iron being heated up, It will go out when the required temperature is reached. It also indicates that the unit is ready for use. During use, it is normal that the temperature indicator light will cycle from ON to OFF and then OFF to ON automatically.
4. Before every first use, it is proposed that the iron will be cleaned as following procedure: Select adjustable steam knob to Max steam setting, hold the iron and press the steam switch underneath the handle for 20 seconds, and then release for 30 seconds, do this for two cycles. When heating indicator light OFF, it is ready for ironing.
5. During steam ironing, adjust steam rate according to requirements based on above steam function setting.
6. After use, set the temperature control dial to “MIN” position, and place the iron back on the iron rest plate. Switch off the unit by pressing the power switch and then unplug the appliance from the outlet.
7. Slide out the water tank and pour out the remaining water.

NOTES:

a. For every first time use, it is normal that a slightly vibration sound may be occurred from electrical pump inside the base unit for a few seconds when steam ironing started. It is because the water has been being just pumped into the heating chamber. If this abnormal conditions continuously happen for more than 30 seconds, please check

whether water tank and filter assembled correctly or not.

b. Every first time use, please set adjustable steam knob to Max position to allow steam escape quickly.

DRY IRONING

1. Connect the appliance to a suitable socket outlet. Press the power switch at base control panel until heating indicator light turn ON to show the connection of the power supply. Set steam adjustable knob to Min to dry ironing.
2. Set temperature control dial at the iron until desired temperature indicator light, light up to indicate the iron being heated up according to above fabric setting chart.

Temperature indicator light will go out when the required temperature is reached.

The temperature indicator will cycle from ON to OFF and then OFF to ON automatically, during use, do not press down steam switch.

1. After use, set the Temperature control dial to “MIN” position, and place the iron back on the iron rest plate. Switch off the unit by pressing the power switch and then unplug the appliance from the outlet.

Note: When changing your temperature control dial setting from high setting to lower, it is proposed that not to start ironing immediately since there may be any burns caused on your fabrics by high temperature. Please wait for temperature indicator light (in iron unit) stop blinking, and then start ironing.

Otherwise burns will be caused to your fabrics.

VERTICAL STEAM IRONING

Follow the steam ironing process, and then hold the iron in vertical position between 5cm and 15cm away from the hanged fabrics. Press down steam switch, this will create vertical steam. This feature is especially used for removing creases from hanging clothes and curtains. Never directly perform steam ironing on people.

NOTE:

a. During the steam process, the surface temperature of the supply hose would be quite hot. It is normal since there has steam passing through the steam transportation pipe inside from the base to iron. Do not touch by hand!

b. Please keep the supply-hose unblocked and untwisted.

REPLACEMENT OF FILTER

How often the filter needs to be replaced depends on the water hardness. We recommend to change the filter every 2-3 months.

Follow below procedure to replace the filter:

I. Slide out the water tank from the base, and then take out the filter from the water tank.

II. Replace it with a new one.

III. Re-install it into the water tank.

IV. Fill water into water tank up to MAX fill level, and slide water tank into the power base again.

Note: For every first use of the filter, please put the filter for 10 min. it in water for bet-

ter performance.

SAFETY PROTECTION DEVICE

This appliance has a safety valve protection device on the base unit. If the supply hose is blocked accidentally, the safety valve will be opened to release the steam under the base unit. This is normal that it may produce a high pitch sound. Once this abnormal condition happened, unplug the appliance

immediately. To check whether any damage is found in the supply hose.

ANTI-SCALE SYSTEM

1. Filter is designed to reduce the build-up of limescale which occurs during steam ironing, this will prolong the working life of your iron. However, please note that the filter will not completely stop the natural process of limescale build-up.
2. Filter should be replaced with a new one after about 2-3 months use. Working life of filter depends on local water you used. If working life exceeds its Max limit, the appliance can be used continuously, but limescale will be built up in steam chamber. So it is proposed to replace with a new filter as soon as possible or mix your tap water with distilled water at a proportion of 50%, if your local water is hard.

EMPTYING AND STORING

1. After use, slide out the water tank and pour out all the remaining water.
2. Disconnect the appliance from the power supply and allow the appliance to cool down for 60 minutes at least.
3. The iron should be placed on the iron rest plate of the power base and they should be stored together.

CLEANING AND MAINTENANCE

1. Unplug the appliance from the main supply and let the iron cool down.
2. Clean the iron with a damp cloth.
3. Wipe off scale and any other deposits on the soleplate with a damp cloth or non-abrasive(liquid) cleaner.
4. Never clean the appliance under the tap water.
5. To protect steam vents being blocked by limescale for long time use, please clean steam vents by a 2mm steel pin after every 3-5 months use. If any limescale comes out fo the steam vents when you start to iron. Take a old towel and iron until no limescale residu is coming out of the steam vents any more.

BEZPEČNOSTNÍ UPOZORNĚNÍ

PŘÍPRAVA PŘÍSTROJE NA ŽEHLENÍ