SWS2103W - Audio/video converter PHILIPS - Free user manual and instructions

Brand	Philips
Model	SWS2103W
Category	Audio/video converter
Product type	A/V signal converter
Dimensions (L x W x H)	9 cm x 5 cm x 2 cm
Net weight	100 g
Power supply	USB 5 V / 1 A (cable included)
Power consumption	0.5 W
Operating temperature	0 °C to 40 °C
Operating relative humidity	20 % to 80 % (non-condensing)
Supported video resolutions	480p, 576p, 720p, 1080i, 1080p
Supported audio formats	PCM, analog stereo
Connectivity	HDMI input, HDMI output + analog audio (RCA)
Main functions	HDMI audio extraction, HDMI to analog conversion
Box contents	Converter, USB cable, RCA audio cable, user manual
Care and cleaning	Unplug before cleaning; use a soft, dry cloth
Safety precautions	Do not expose to moisture or heat sources
Spare parts	Available from Philips customer service
Repairability	Repairability index not provided; contact after-sales service
Warranty	2 years

Frequently Asked Questions - SWS2103W PHILIPS

How to connect the SWS2103W converter?

Connect the USB cable to the power supply (5 V). Connect the HDMI source to the converter input, then connect the HDMI output to your TV or the RCA audio cable to your speakers.

What cables are included with the device?

The converter comes with a USB cable for power, an RCA audio cable (male to male), and an HDMI cable (depending on version). Check the package contents.

What is the maximum supported resolution?

The SWS2103W supports resolutions up to 1080p (Full HD). It can also handle 720p and 1080i.

Is the converter HDCP compatible?

Yes, it supports HDCP 1.2, allowing playback of protected content (DVD, Blu-ray, etc.).

Can I power the device from a USB port on my TV?

Yes, a standard USB port (5 V / 1 A) is sufficient. Some older TVs may provide less current; then use the supplied power adapter.

How to extract audio from an HDMI signal?

Simply connect the RCA audio cable (red/white) to the analog outputs of the converter. Audio will be extracted automatically.

What to do if the image does not display?

Check that all cables are properly connected and that the power is active. Try changing the HDMI source and restart the converter.

Does the converter work wirelessly?

No, the SWS2103W is a wired converter. It requires a direct HDMI connection. For a wireless solution, see the appropriate Philips models.

How to maintain the converter?

Unplug it before cleaning. Use a soft, dry cloth. Do not use liquid or abrasive products.

What is the warranty period?

The legal warranty is 2 years from the date of purchase. Keep your receipt for any claims.

USER MANUAL SWS2103W PHILIPS

Video RF Modulator Owner's Manual

INTRODUCTION

Your Video RF Modulator is designed to convert the separate audio and video signals (from a video camera, computer, portable VCR, satellite receiver, DVD player, etc.) into normal VHF TV signals that you can see on any regular TV set.

Warning: For indoor use only; to reduce risk of fire or shock hazard, do not expose this product to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the RF Modulator's enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the RF Modulator's case.

This symbol is intended to inform you that important operating and maintenance instructions are included in the literature accompanying this RF Modulator.

THE FCC WANTS YOU TO KNOW

This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation.

Even under optimum conditions, your Video RF Modulator may cause undesirable interference. We suggest the following methods for trouble shooting

1. Use an AC outlet that is not the same circuit as the receiver.
2. Place the RF Modulator in a location further away from your receiver.
   In the event that interference still occurs after the above steps have been taken, you are required by FCC regulations to discontinue use of this product.

Important Safety Information

1. Before beginning installation of your Video RF Modulator read all instructions and follow exactly throughout the installation.
2. After installation is complete, keep all instructions in a safe place so they may be referred to in the future if necessary.
3. Please note the ideal environment for this device is on a hard flat surface away from all heat sources and moisture.

PARTS REQUIRED

You need the following items, not supplied with your Video RF Modulator, to connect it between a video input source (video game, video camera, satellite receiver, DVD player, etc.) and your TV.

PARTS REQUIRED continued

• Two 75-ohm coaxial cables with F-type connectors
• If your TV does not have a VHF 75-ohm F-connector, you will also need a 75-ohm-to-300-ohm matching transformer
• One video shielded cable with RCA Plugs and one audio (stereo) cable with RCA Plugs OR Dubbing Cable for VCR/DVD with RCA Plugs OR 3 shielded cables with RCA Plugs
• One S-Video cable

CONNECTIONS

Follow these steps to connect your RF Modulator:

1. Connect an S-Video or video cable between the S-Video or video output jack on your video source and the RF ModulatoSsVIDEO IN or VIDEO IN jack.

Note: If both the S-Video and standard video are hooked up, the S-Video will be given priority

CONNECTIONS continued

1. Connect another audio/video cable between the audio output jacks on your video source and the RF Modulator AUDIO IN jacks.

1. Connect the 75-ohm coaxial cables to the RF Modulator following these guidelines:

- If your TV is already connected to another VHF input source (such as cable TV, VCR, etc.):

CONNECTIONS continued

a. Disconnect the input sources 75-ohm cable from the TV's 75-ohm VHF input terminal, and reconnect it to the RF Modulator ANT IN terminal.

b. Then add a 75-ohm coaxial cable connected between the TO TV terminal on the RF Modulator and 75-ohm VHF input terminal on your TV.

- If your TV is not already connected to another VHF source:

a. Connect the input sources (antenna, cable TV, VCR, etc.) 75-ohm cable to the RF Modulator's ANT IN terminal.
b. Connect a 75-ohm coaxial cable between the TO TV terminal on the RF Modulator and the 75-ohm VHF input terminal on your TV.

Note: If your TV has only 300-ohm VHF screw terminals, use a 75-ohm-to-300-ohm matching transformer to complete the connection.

1. Plug the RF Modulator's power cord into a standard AC outlet.

OPERATION

1. Turn on the TV and set it to either Channel 3 or 4, whichever of the two is not used for regular broadcasts in your area.
2. Set the RF Modulator's CHANNEL 3 or 4 switch to the same channel you set on the TV (3 or 4)
3. Turn on the connected video source, the modulator will deliver the video/audio signal to the TV set and light will switch to channel 3 or 4.
4. Turn off the connected video source, the modulator will be switched automatically to deliver the ANT/Cable signal to the TV set and lights for channel 3 or 4 will turn off.

Note: LED light is on only while the video signal is being modulated

OPERATION continued

1. To get stereo from your stereo receiver connect L-R stereo audio cables to stereo receiver or home theater.

SPECIFICATIONS

Video Carrier Output Level 63 dB uB dB uV

RF Output Channels 3 or 4 3 or 4

RF Output Impedance 75 ohms 75 ohms

Audio Input Impedance 13 13 ± 3 k ohms

Specifications are typical, individual units might vary.

Specifications are subject to change and improvement without notice.

Limited Lifetime Warranty the Manufacturer warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for the life of the product. This warranty extends only to the original purchaser and is non-transferable. Defective products must be returned with the dated proof of purchase to the place of purchase for replacement. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. Incidental or consequential damages are disclaimed where permitted by law.

PRECAUCIÓN

PELIGRO DE ELECTROCHOQUE NO ABRIR

CONNECTIONS continued

ATTENTION

RISQUE DE CHOC ÉLECTRIQUE. ÉVITEZ D'OUVRIR.

ATTENTION: POUR AMOINDRIR LE RISQUE DE CHOC ÉLECTRIQUE, ÉVITEZ DE RETIRER LE COUVERCLE OU LA PARTIE ARRIÈRE. AUCUNE PIÈCE RÉPARABLE PAR L'UTILISATEUR À L'INTÉRIEUR. CONFIEZ L'ENTRETIEN OU LES RÉPARATIONS À DU PERSONNEL QUALIFIÉ.