AERO 21-01 PC INOX - Vacuum Cleaner NILFISK - Free user manual and instructions

Product type	Vacuum cleaner
Brand	Nilfisk
Model	AERO 21-01 PC INOX
Category	Professional vacuum cleaner
Tank capacity	21 liters
Tank material	Stainless steel
Motor power	1200 W
Filter type	HEPA filter
Noise level	70 dB
Weight	8.5 kg
Dimensions (L x W x H)	40 x 40 x 60 cm
Power cord	10 meters
Suction type	Dry and wet
Included accessories	Floor nozzle, crevice tool, dust brush
Power regulation	Variable
Emptying system	Quick release
Maintenance	Clean the filter regularly
Safety	Automatic shut-off in case of overheating
Spare parts available	Yes, seals and filters
Repairability	Repairability score: 8/10

Frequently Asked Questions - AERO 21-01 PC INOX NILFISK

How to change the dust bag of the Nilfisk AERO 21-01 PC INOX vacuum cleaner?

To change the bag, open the front cover, remove the full bag, insert a new bag making sure it is properly attached to the nozzle. Close the cover until it clicks. Use only compatible Nilfisk bags.

How to clean the HEPA filter?

The HEPA filter can be cleaned with warm soapy water. Let it dry completely (24h) before reinstalling. Do not use harsh detergents or put it in the dishwasher.

Can I vacuum liquids with this vacuum cleaner?

Yes, the AERO 21-01 PC INOX model is designed for wet vacuuming. Make sure the specific liquid filter is installed and empty the tank after use.

What to do if the vacuum cleaner does not turn on?

Check the power outlet, cord and switch. If the problem persists, check the fuse or circuit breaker. Contact customer service if necessary.

What accessories are included with the vacuum cleaner?

The package includes a floor nozzle, crevice tool, dust brush and a flexible hose. Optional accessories are available from your retailer.

How to adjust the suction power?

Use the adjustment knob located on the body of the vacuum cleaner. Turn it to increase or decrease the power according to the surface to be cleaned.

Where to find spare parts for the Nilfisk AERO 21-01 PC INOX?

Spare parts (filters, bags, seals) are available on the official Nilfisk website or from authorized dealers. Use the model number to identify the correct parts.

The vacuum cleaner makes an abnormal noise, what to do?

Immediately stop the appliance. Check if the tank is full, the filter is clogged or an object is stuck in the hose. Clean the filter and tank. If the noise persists, consult a professional.

How to empty the tank after vacuuming liquids?

Unplug the vacuum, open the emptying system (usually a cap or latch) and pour the liquid into a sink. Rinse the tank with clean water and let it dry before closing.

What is the warranty on the Nilfisk AERO 21-01 PC INOX?

The legal warranty is 2 years. For specific conditions, refer to the warranty certificate provided with the appliance. Register your product on the Nilfisk website for a possible extension.

USER MANUAL AERO 21-01 PC INOX NILFISK

Operating instructions

AERO 21

AERO 21 INOX

EN Operating instructions ....1

Line drawing of a vacuum cleaner device with no text or symbols

Line drawing of a vacuum cleaner device with control panel and wheels (no text or symbols)

AERO 21-01 INOX

Line drawing of a vacuum cleaner device (no text or symbols)

AERO 21-21 INOX

Line drawing of a vacuum cleaner device (no text or symbols)

3A ^*
4A*)

Line drawing of a mechanical component with a threaded fitting and a circular opening (no text or symbols)

Diagram of a pipe with directional arrows indicating flow or movement, no text or symbols present

Line drawing of a hand holding a device with a numbered label (5) indicating a step, no text or symbols present.

2B ^x
3B*)

Line drawing of a mechanical device with a threaded connector and internal components (no text or symbols)

Two identical electrical socket diagrams with arrows pointing to internal components (no text or symbols)

Diagram of a fiber optic cable with directional arrows indicating flow or movement (no text or symbols)

Two identical electrical socket buttons with arrows pointing to each, no text or symbols present

Diagram of a pipe with directional arrows indicating flow or movement, no text or symbols present

4B ^*

Line drawing of a vacuum cleaner with attached hoses and control panel (no text or symbols)

5B ^*

Line drawing of a vacuum cleaner with internal components and mounting bracket (no text or symbols)

graph TD
    A["Step 2: Connector"] --> B["Step 3: Cable"]
    B --> C["Step 2: Connectors"]
    C --> D["Step 4: Connectors"]
    D --> E["Step 4: Final Cable"]

2D

Technical line drawing of a mechanical device with internal components and mounting brackets (no text or symbols)

Quick reference guide

The pictorial quick reference guide

The pictorial quick reference guide is designed for helping you when starting up, operating and storing the unit. The guide are subdivided into 4 sections, which are represented by symbols:

A

Before starting

1A - Unpack Accessories

2A - Filter Bag Installation

3A - Hose Insert

4A - Tube Fixed

5A - Accessories Placement

B

Control/Operation

1B - Emptying Container

2B - Blow Function

3B - Push & Clean

4B - Cable Storage

5B - Hose Storage

C

Connecting electrical appliances

1C - Power Tool

D

Replacement of:

1D - Filter Bag Replacement

2D - Filter Replacement

*) Optional accessories / Option depending on model

Contents

1 Important safety instructions .... 2

1.1 Symbols used to mark instructions ..... 2

1.2 Instructions for use 2

1.3 Purpose and intended use 2

1.4 Electrical connection 2

1.5 Extension lead 2

1.6 Guarantee 2

1.7 Tests and approvals 2

1.8 Important warnings 3

1.9 Double-insulated appliances* 3

1.9.1 Only applicable to UK 3

1.9.2 Electrical connections 3

1.9.3 Blue-neutral brown-live 4

2 Risks 4

2.1 Electrical components.... 4

2.2 Picking up liquids 4

2.3 Hazardous materials 4

2.4 Spare parts and accessories 4

2.5 Emptying dirt tank 5

2.6 In explosive or inflammable atmosphere ... 5

2.7 Blower function. 5

3 Control / Operation 5

3.1 Starting and operating of the machine ..... 5

3.2 Auto-On/Off-Operation for power tools* ..... 5

3.3 Before wet pick-up 5

3.4 Emptying after wet pick-up 5

3.5 Emptying after dry pick-up 5

3.6 Push & Clean 6

4 After using the cleaner 6

4.1 After use 6

4.2 Transport 6

4.3 Storage 6

4.4 Recycling the cleaner 6

5 Maintenance 6

5.1 Regular servicing and inspection 6
5.2 Maintenance 6

6 Further information 7

6.1 EU Declaration of conformity 7
6.2 Specifications.... 7

1 Important safety instructions

This document contains the safety information relevant for the appliance along with a quick reference guide. Before starting up your vacuum cleaner for the first time, this instruction manual must be read through carefully. Save the instructions for later use.

Further support

Further information on the appliance can be found on our web site at www.nilfisk-alto.com.

For further queries, please contact the Nilfisk-ALTO service representative responsible for your country. See reverse of this document.

1.1 Symbols used to mark instructions

DANGER

Danger that leads directly to serious or irreversible injuries, or even death.

WARNING

Danger that can lead to serious injuries or even death.

CAUTION

Danger that can lead to minor injuries and damage.

1.2 Instructions for use

The appliance must:

• only be used by persons, who have been instructed in its correct usage and explicitly commissioned with the task of operating it
• only be operated under supervision
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
• Children shall be supervised to make sure that they do not play with the appliance.
• Do not use any unsafe work techniques.
• Never use the vacuum cleaner without a filter.
• Switch off the appliance and disconnect the mains plug in the following situations:
  • Prior to cleaning and servicing
• Prior to replacing components
• Prior to changing over the appliance
  • If foam develops or liquid emerges

Besides the operating instructions and the binding accident prevention regulations valid in the country of use, observe recognised regulations for safety and proper use.

1.3 Purpose and intended use

This vacuum cleaner is designed, developed and rigorously tested to function efficiently and safely when properly maintained and used in accordance with the following instructions.

This vacuum cleaner is to be used for commercial or for household use. Accidents due to misuse can only be prevented by those using the machine.

READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

This machine is suitable for picking up dry, non-flammable dust and liquids.

Any other use is considered as improper use. The manufacturer accepts no liability for any damage resulting from such use. The risk for such use is borne solely by the user. Proper use also includes proper operation, servicing and repairs as specified by the manufacturer.

1.4 Electrical connection

1. It is recommended that the vacuum cleaner should be connected via a residual current circuit breaker.
2. Arrange the electrical parts (sockets, plugs and couplings) and lay down the extension lead so that the protection class is maintained.
3. Connectors and couplings of power supply cords and extension leads must be watertight.

1.5 Extension lead

1. As an extension lead, only use the version specified by the manufacturer or one of a higher quality.
2. When using an extension lead, check the minimum cross-sections of the cable:

Cable lenth Cross section
	< 16 A < 25 A
up to 20 m 1.5 mm	^2	2.5 mm ^2
20 to 50 m 2.5 mm	^2	4.0 mm ^2

1.6 Guarantee

Our general conditions of business are applicable with regard to the guarantee.

Unauthorised modifications to the appliance, the use of incorrect brushes in addition to using the appliance in a way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage.

1.7 Tests and approvals

Electrical tests must be performed in accordance with the provisions of safety regulations EN 62638. These tests must be performed at regular intervals and after repairs or modifications.

The vacuum cleaner has been approved in accordance with IEC/EN 60335-2-69.

1.8 Important warnings

WARNING

- To reduce the risk of fire, electric shock, or injury, please read and follow all safety instructions and caution mar-kings before use. This vacuum cleaner is designed to be safe when used for cleaning functions as specified. Should damage occur to electrical or mechanical parts, the cleaner and / or accessory should be repaired by a competent service station or the manufacturer before use in order to avoid further damage to the machine or physical injury to the user.

• Do not leave the machine when it is plugged in. Unplug from the socket when not in use and before maintenance.
• Do not use with damaged cord or plug. To unplug grasp the plug, not the cord. Do not handle plug or cleaner with wet hands. Turn off all controls before unplugging.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run cleaner over cord. Keep cord away from heated surfaces.
• Keep hair, loose clothing, fingers and all parts of the body away from ope nings and moving parts. Do not put any objects into openings or use with opening blocked. Keep openings free of dust, lint, hair, and anything else that could re du ce the flow of air.
• This machine is not suitable for picking up hazardous dust.
• Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be pre sent.
• Do not pick up anything that is burning or smoking, such as cigarettes, mat ches or hot ashes.
• Use extra care when cleaning on stairs.
• Do not use unless filters are fitted.
• If the cleaner is not working properly or has been dropped, da ma ged, left outdoors, or dropped into water, re turn it to a service center or dealer.
• If foam or liquid escapes from the machine, switch off immediately.
• The vacuum cleaner may not be used as a water pump. The vacuum cleaner is intended for vacuuming air and water mixtures.
• Connect the vacuum cleaner to a properly earthed mains supply. The socket outlet and the extension cable must have an operative protective conductor.
• Provide for good ventilation at the working place.

- Do not use the vacuum cleaner as a ladder or step ladder. The vacuum cleaner can tip over and become damaged. Danger of injury.

1.9 Double-insulated appliances\*

CAUTION

• Use only as described in this manual and only with the manufacturer's re commen ded attachments.
• BEFORE YOU PLUG IN YOUR CLEANER, check the rating plate at the cleaner to see if the rated vol ta ge agrees within 10% of the voltage available.
• This appliance is provided with double insula tion. Use only identical re pla ce ment parts. See instructions for ser vi cing double insulated appliances.

In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a mean for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be identical to the parts they replace. A double insulated appliance is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED." The symbol (square within a square) may also be used on the product.

The machine is equipped with a specially designed cord which if damaged, must be replaced by a cord of the same type. This is available at authorised service centres and dealers and must be installed by trained personnel.

1.9.1 Only applicable to UK.

Please read these essential instructions

These instructions have been prepared with safety and efficiency paramount.

The machine operator must be trained by a suitably qualified instructor and must understand these instructions for use, and be made aware of any relevant regulations and legislation in force at the time of use.

1.9.2 Electrical connections

CAUTION

DOUBLE-INSULATED MACHINES - IMPORTANT:

This 240 volt 50 Hz. machine are fitted with a 13 amp. 3 pin moulded plug. The plug is fitted with a 13 amp. detachable fuse. The correct replacement for the fuse is identified by marking or colour coding. Only fuses that are

ASTA approved to BS 1362 should be fitted. Never use the plug without the fuse cover fitted. Replacement fuse covers are available at any electrical retail outlet.

If the available socket outlet is not suitable for the plug supplied, the plug must be cut off and an appropriate plug fitted. The plug thus cut off MUST BE DESTROYED for safety reasons before being disposed of.

Machines built for other voltages and frequencies are not normally supplied with a fitted plug.

If it is necessary to fit a plug, the wires in this power supply cord are coloured in accordance with the following code:

1.9.3 Blue-neutral brown-live

TO CONNECT THE NEW PLUG:

If using a three-pin plug, do not make any connection to the terminal in the plug which is marked with the letter 'E' or by the safety earth symbol or coloured green or green & yellow.

The blue wire must be connected to the terminal in the plug which is marked with the letter 'N' or is coloured black or blue.

The brown wire which must be connected to the terminal in the plug which is marked with the letter 'L' or is coloured red or brown.

If the plug to be fitted does not conform to the above notation then consult a qualified electrician.

2 Risks

2.1 Electrical components

DANGER

The upper section of the vacuum cleaner contains live components.

Contact with live components leads to serious or even fatal injuries.

- Never spray water on to the upper section of the vacuum cleaner.

DANGER

Electric shock due to faulty mains connecting lead.

Touching a faulty mains connecting lead can result in serious or even fatal injuries.

• Do not damage the mains power lead (e.g. by driving over it, pulling or crushing it).
• Regularly check whether the power cord is damaged or shows signs of ageing.
• If the electric cable is damaged, it must be replaced by an authorized Nilfisk distributor or similar qualified person in order to avoid a hazard.

- In no circumstances should the power supply cord be wrapped around fingers or any part of the operators person.

CAUTION

Appliance socket.*

The appliance socket is only designed for the purposes defined in the operating instructions. The connection of different appliances can result in damage.

• Prior to plugging in an appliance, always switch off the vacuum cleaner and the appliance that is to be connected.
• Read the operating instructions to the appliance to be connected and observe the safety notes contained in these.

CAUTION

Damage due to unsuitable mains voltage. The appliance can be damaged as a result of being connected to an unsuitable mains voltage.

- Ensure that the voltage shown on the rating plate corresponds to the voltage of the local mains power supply.

2.2 Picking up liquids

CAUTION

Picking up liquids.

Do not pick up flammable liquids

• Before liquids are picked up, always remove the filter bag/wastebag and check that the float or the water level limit works properly.
• The use of a separate filter element or filter screen is recommended.
• If foam appears, stop work immediately and emty the tank.

2.3 Hazardous materials

WARNING

Hazardous materials.

Vacuuming up hazardous materials can lead to serious or even fatal injuries

• The following materials must not be picked up by the vacuum cleaner:
• hazardous dust
• hot materials (burning cigarettes, hot ash, etc.)
• flammable, explosive, aggressive liquids (e.g. petrol, solvents, acids, alkalis, etc.)
• flammable, explosive dust (e.g. magnesium or aluminium dust, etc.)

2.4 Spare parts and accessories

CAUTION

Spare parts and accessories.

The use of non-genuine spare parts and accessories can impair the safety of the appliance.

- Only use spare parts and accessories from Nilfisk-ALTO.

- Use only the brushes supplied with the vacuum cleaner or specified in the operating manual.

2.5 Emptying dirt tank

CAUTION

Picking up environmentally hazardous materials.

Materials picked up can present a hazard to the environment.

- Dispose of the dirt in accordance with legal regulations.

2.6 In explosive or inflammable atmosphere

CAUTION

This machine is not suitable for use in explosive or inflammable atmospheres or where such atmospheres are likely to be produced by the presence of volatile liquid or inflammable gas or vapour.

2.7 Blower function.

CAUTION

The vacuum cleaner has a blower function. Do not blow the outgoing air randomly in enclosed areas. Use the blower function only with a clean hose. Dusts can be hazardous to one's health.

3 Control / Operation

3.1 Starting and operating of the machine

Check that the electrical switch is switched off (in position 0). Check that suitable filters are installed in the machine. Then connect the suction hose into the suction inlet at the machine by pushing the hose forward until it fits firmly in place at the inlet. Then connect the two tubes with the hose handle, twist the tubes in order to ensure that they are properly fitted. Attach suitable nozzle to the tube. Choose nozzle depending on what type of material that is to be picked-up. Connect the plug into a proper electrical outlet. Put the electrical switch into position 1 in order to start the motor.

ress I : Activate the machine

Press 0 : Stop the machine

ress I : Activate the machine

Press 0 : Stop the machine

Press ☐ : Activate Auto-On/Off operation

ess I : Activate the machine - turn clock

se for speed control

Press 0 : Stop the machine

Press ☐ : Activate Auto-On/Off operation

- turn counter clockwise for speed control

3.2 Auto-On/Off-Operation for power tools\*

A socket outlet with earthing contact is integrated in the vacuum cleaner. An external power tool can be connected there.

The vacuum cleaner can be switched on and off by the power tool connected. Dirt is picked up from the source of dust immediately.

To comply with regulations, only approved dust producing tools should be connected.

The maximum power consumption of the connected electrical appliance is stated in section "Specifications".

Before switching the switch to position _1 ensure that the tool connected to the appliance socket is switched off.

3.3 Before wet pick-up

CAUTION

The machine is equipped with a float system that shuts off the airflow through the machine when the maximum liquid level is reached. You will hear a noticeable change of the sound from the motor and notice that the suction power decreases. When this occurs, switch the machine off. Disconnect the machine from the socket. Never pick up liquid without the float body in place.

3.4 Emptying after wet pick-up

Before emptying the container, unplug the vacuum cleaner. Disconnect the hose from the inlet by pulling out the hose. Release the latch by pulling them outwards so that the motor top is released. Open up the motor top from container. Always empty and clean the container and the float system after picking-up liquids. Never pick up liquid without the float system and filter installed in the machine.

Empty by tilting the container backwards and pour the liquids into a floor drain or similar.

Put back the motor top to the container. Secure the motor top with the latches.

3.5 Emptying after dry pick-up

Remove the electrical plug from the socket before emptying after dry pick-up. Check the filters and dustbag regularly. Release the latch by pulling them outwards so that the motor top is released. Open up the motor top from container.

Cartridge filter: To clean the filter you can either shake, brush or wash it. Wait until it is dry before you reuse it.

Dustbag: check bag to ensure the fill factor. Replace dust bag if necessary. Remove the old bag. The new bag is fitted by passing the cardboard piece with the rubber membrane through the vacuum inlet. Make sure that the rubber membrane is passing past the heightening at the vacuum inlet.

After emptying: Close motor top to the container and secure the motor top with the latches. Never pick up dry material without cartridge filter and dustbag fitted in the machine. The suction efficiency of the vacuum cleaner depends on the size and quality of the filter and dust bag. Therefore - use only Original filter and dust bags.

3.6 Push & Clean

The machine is equipped with a semi automatic filter cleaning system. Push & Clean. The filter cleaning system must be actuated latest when the vacuuming performance is no longer sufficient. Regular use of the filter cleaning feature increases the tool life of the filter.

4 After using the cleaner

4.1 After use

Remove the plug from the socket when machine is not in use. Wind up the cord starting from the machine. The power cord can be wound up around the motor top or at the container. Some variants have special storage places for accessories.

4.2 Transport

• Before transporting the dirt tank, close all the locks.
• Do not tilt the cleaner if there is liquid in the dirt tank.
• Do not use a crane hook to lift the cleaner.

4.3 Storage

• Store the appliance in a dry place, protected from rain and frost.
• The machine shall be stored indoors only.

4.4 Recycling the cleaner

Make the old cleaner unusable.

1. Unplug the cleaner.
2. Cut the power cord.
3. Do not discard of electrical appliances with household waste.

As specified in European Directive 2012/19/EU on old electrical and electronic appliances, used electrical goods must be collected separately and recycled ecologically.

5 Maintenance

5.1 Regular servicing and inspection

Regular servicing and inspection of your machine must be carried out by suitably qualified personnel in accordance with relevant legislation and regulations. In particular, electrical tests for earth continuity, insulation resistance, and condition of the flexible cord should be checked frequently. In the event of any defect, the machine MUST be withdrawn from service, completely checked and repaired by an authorized service technician.

5.2 Maintenance

Remove the plug from the socket before performing maintenance. Before using the machine make sure that the frequency and voltage shown on the rating plate correspond with the mains voltage.

The cleaner is designed for continuous heavy work. Depending on the number of running hours – the dust filter should be renewed. Keep the vacuum cleaner clean with a dry cloth, and a small amount of spray polish.

For details of after sales service contact your dealer or Nilfisk-ALTO service representative responsible for your country. See reverse of this document.

6 Further information

6.1 EU Declaration of conformity

CE Declaration of Conformity
Product: Vacuum cleaner for wet and	dry operation
Type: AERO 21
The design of the unit corre sponds to the following pertinent regulations:	EC - Machinery Directive 2006/42/ECEC - Directive EMC 2004/108/ECEC - RoHS Directive 2011/65/EC
Applied harmonised standards: EN 60	335-1:2012, EN 60335-2-69:2012, EN 55014-1:2006+A1+A2, EN 55014-2:1997+A1+A2, EN 61000-3-2:2006+A1+A2, EN 61000-3-3:2008
Applied international standards and technical specifications:	IEC 60335-2-69:2012IEC 60335-1:2010
Name and address of the person autho rised to compile the technical file:	Anton Sørensen, Senior Vice President – Global R&DNilfisk A/SBanemarksvej 58,DK-2605 Broendby
Identity and signature of the person empowered to draw up the declaration on behalf of the manufacturer:	Anton Sørensen, Senior Vice President – Global R&DNilfisk A/SBanemarksvej 58,DK-2605 Broendby
Place and date of the declaration: Hadsund 11-03-2015

For Japan, the product complies with IEC 60335-1:2001 & IEC 60335-2-2:2002

6.2 Specifications

AERO 21, AERO 21 INOX
		EU GB CH US JP
		21-01 21-	21 21-01 21-	-01 21-01	21-21 21-	1-01 21-01
Possible voltage	V	220-240V	220-240V	230V	110V	230V	230V	120V	100V
Power P_iec	W	1000	1000	1000	1000	1000	1000	1000	1200
Connected load for appliance socket	W	-	2600 / 1300*	-	-	- 1300 -		-
Mains frequency	Hz	50/60	50/60	50/60	50/60	50/60	50/60	50/60	50/60
Fuse	A	16 / 10*	16 / 10*	13	16	10	10	15	15
Protection grade (moist, dust)		IP24
Protection class (electrical)		II □	I	II □	II □	II □	I	II □	II □
Airflow	litres/min m^3/h	3600216
Vacuum	kPa	21							23
Sound pressure level 1 m,EN 60704-1	dB(A)+/-2	72							73
Working sound level	dB(A)+/-2	64							65
Vibration ISO 5349	m/s2+/- 1	<1,5
Weight	kg	7,5 / 8,5 (INOX)
* DK

Specifications and details are subject to change without prior notice.

Kurzanleitung

2.5 Vuiltank legen 25

2.3 Farliga material

WARNING

Farliga material

LUGEGE LÄBI KÖIK OHUTUSJUHISED JA PIDAGE NEIST KINNI.

Herrera 1855, 6 floor, Of. A-604

Unit 1, 13 Bessemer Street Blacktown

NSW 2148 Australia

www.nilfi sk-alto.com.au

AUSTRIA

Nilfi sk-ALTO

Riverside Business Park

Boulevard Internationalelaan 55

Nilfi sk-Advance Cleaning Equipment

(Shanghai) Co Ltd.

No. 4189, Yindu Road

Xinzhuang Industrial Park

Shanghai 201108

www.nilfi sk.cn

CZECH REPUBLIC

Nilfi sk-Advance s.r.o.

Do Certous 1

VGP Park Horní Pocernice, Budova H2

CZ-190 00 Praha 9

www.nilfi sk.cz

DENMARK

31-39 Wo Tong Tsui St.

Hong Kong, Kwai Chung, N.T.

www.nilfi sk.com

HUNGARY

Nilfi sk-Advance Kereskedelmi Kft.

Pramukh Plaza, 'B' Wing, 4th floor, Unit No. 403

Cardinal Gracious Road, Chakala

Andheri (East), Mumbai 400 099

www.nilfi sk.com

IRELAND

Nilfi sk-Advance

1 Stokes Place

St. Stephen's Green

Dublin 2, Ireland

www.nilfi sk-alto.ie

ITALY

Nilfi sk-Advance S.p.A.

Seongdong-gu, Seoul, Korea

www.nilfi sk.co.kr

MALAYSIA

Nilfi sk-Advance Sdn Bhd

SD 33, Jalan KIP 10

Taman Perindustrian KIP

Sri Damansara

52200 Kuala Lumpur

Malaysia

www.nilfi sk.com

MEXICO

Nilfi sk Advance de Mexico S. de R.L. de C.V.

Agustin M. Chavez 1, PB-004

Col. Centro Ciudad Santa Fe

Sintra Business Park

Zona Industrial Da Abrunheira

Edificio 1, 10 A

Sintra, P-2710-089

www.nilfi sk.pt

RUSSIA

Nilfi sk-Advance LLC

Vyatskaya str. 27, bld. 7, 1st fl oor

Moscow, 127015

www.nilfi sk.ru

SLOVAKIA

Nilfi sk-Advance s.r.o.

Bancíkovej 1/A

SK-821 03 Bratislava

www.nilfi sk.sk

SOUTH AFRICA

WAP South Africa (Pty) Ltd

12 Newton Street

1620 Spartan, Kempton Park

www.wap.co.za

SINGAPORE

Den-Sin

22 Tuas Avenue 2

Singapore

www.nilfi sk.com

SPAIN

Nilfi sk-Advance, S.A.

Torre D'Ara

Passeig del Rengle, 5 Plta.10 ^a

Mataró, E-0830222

www.nilfi sk.es

SWEDEN

Nilfi sk-Advance AB

Taljegårdsgatan 4

431 53 Mölndal

Website: www.nilfi sk-alto.se

SWITZERLAND

NA Sondergger AG

Taiwan Branch (H.K.)

No. 5, Wan Fang Road, Taipei

www.nilfi sk-advance.com.tw

THAILAND

Nilfi sk-Advance Co. Ltd

89 Soi Chokechai-Ruammitr

Viphavadee-Rangsit Road

Jomphol, Jatuchak

Bangkok 10900

www.nilfi sk.com

TURKEY

Nilfi sk-Advance Prof. Tem. Ek. Tic. A.S.

Şerifali Mh. Bayraktar Bulv. Sehit Sk. No:7

Ümraniye, Istanbul 34775

www.nilfi sk.com.tr

UNITED KINGDOM

Nilfi sk-ALTO

Bowerbank Way, Gilwilly Industrial Estate

Penrith, Cumbria

GB-CA11 9BQ

www.nilfi sk-alto.co.uk

UNITED ARAB EMIRATES

Nilfi sk-Advance Middle East Branch

SAIF-Zone, P. O. Box 122298

Sharjah

www.nilfi sk.com

USA

Nilfi sk-Advance

14600 21st Ave. North

Plymouth MN 55447-3408

www.nilfi sk-alto.us

Nilfi sk-Advance, Inc.

Industrial Vacuum Division

740 Hemlock Road, Suite 100

Morgantown, PA 19543

www.nilfi sk-alto.us

VIETNAM

Nilfi sk-Advance Co., Ltd

No.51 Doc Ngu Str. Lieu Giai Ward

Ba Dinh Dist. Hanoi

www.nilfi sk.com