REMINGTON

HC5030 Performer - Lawn mower REMINGTON - Free user manual and instructions

Find the device manual for free HC5030 Performer REMINGTON in PDF.

📄 110 pages English EN Download 💬 AI Question
Notice REMINGTON HC5030 Performer - page 3
Pick your language and provide your email: we'll send you a specifically translated version.

User questions about HC5030 Performer REMINGTON

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lawn mower in PDF format for free! Find your manual HC5030 Performer - REMINGTON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HC5030 Performer by REMINGTON.

USER MANUAL HC5030 Performer REMINGTON

Corded for constant power

Model No. HC5030

10INTHC5030 Version 07/10 Part No. T12-30408

REMINGTON® is a registered Trademark of Spectrum Brands, Inc., or one of its subsidiaries VARTA Consumer Batteries GmbH & Co. KGaA

Allrud-Krupp-Str. 9

72479 Elwangen

www.rcmington-eurosc.com

© 2010 SBI

BZ02

CE

[NO TEXT]

11.09.10 2138

REMINGTON HC5030 Performer - Model No. HC5030 - 1

REMINGTON HC5030 Performer - Model No. HC5030 - 2

REMINGTON HC5030 Performer - Model No. HC5030 - 3

REMINGTON HC5030 Performer - Model No. HC5030 - 4

natural_image Line drawing of a person's head and neck with a hand holding an object, no text or symbols present

REMINGTON HC5030 Performer - Model No. HC5030 - 5

natural_image Line drawing of a person receiving neck massage from a tool (no text or symbols)

REMINGTON HC5030 Performer - Model No. HC5030 - 6

natural_image Line drawing of a person holding a phone to their ear (no text or symbols)

REMINGTON HC5030 Performer - Model No. HC5030 - 7

natural_image Illustration of a person receiving neck massage from a head (no text or symbols)

REMINGTON HC5030 Performer - Model No. HC5030 - 8

natural_image Line drawing of a person applying hair to the ear (no text or symbols)

REMINGTON HC5030 Performer - Model No. HC5030 - 9

natural_image Simple line drawing of a hand pressing down on a surface within a circle, with an arrow indicating motion (no text or symbols)

INTERNATIONAL SERVICE CENTRE

GERMANY BENELUX FRANCE DENMARK ITALY SCANDINAVIA AUSTRIA SWITZERLANDCentral Europe00800/821700821Mo-F: 9 a.m. - 3 p.m. Central European Time (free call)E-Mail: service@newington-europe.comwww.rumington-europe.com
SPAIN+34 902 10 45 17; 08:00 - 13:00; lunos - viernes (Posveens)+34 932 070 166 (Informacion al consumidor final)
PORTUGAL+351 299 942 915;ri renase@press.net
MALTATel. 00800 821 700 82 (free call)

MALTA Tel. 00800 821 700 82 (free call)

UNITED KINGDOM cl. +44 0800 212 438 (free call)

Rayone Europe Ltd, Watermans House, Kingsbury Overseant, The Causeway

Staines, Middlesex, TW18 JBA, UNITED KINGDOM, www.cemington.co.uk

CL. +420 487 754 605

VARTA Botene spol. s.r. o. Jindricha z Lipé 105, 470 01: Ceska Lipo.

IRELAND CESKA REPUBLIKA, www.cs.cimington-surape.com

IRELAND cl. +353 (0) | 460 4711

Rohington Carcomer Products, Unit 7C, Interview Business Park New Nazoa Road, Dublin 22, 1981 AND www.reminen.co.uk

MAGYAROREZAG

▶ MAGTAROSZAG cl. +36 1 3300 404 Reminuten Sumschränktes: 1128 Budapest, Vienna, 1265, www.com.cn

  1. PRICKS

POLSKA cl. +48 22 328 11 50

Varta Batecic Sp. 2 o.o., ul. Fabryzom 5, 00-416 Warszawa, POLEKA

Fax +48 32 528 11 61, www.pierington-europe.com

VARTA Consumer Batteries, Khaid Bir Woleed Street, Al Jowshara Bldg 504, Dubai.

UAE, www.ramington-europe.com

CROATIA Tel. +385 12481111

Ako Zagreb d.o.o., Zinjak hb, 10305 Zagreb, Croatia, www.ramington-europe.com

CYPRUS Tel +357-24-532220

Tel: +357-24-332220 Thence Trdgat Ltd, Barbara Ave 25, 2100 Academy, University

www.cimington.com

▶ ROMANIA Tel: +40 21 411 92 23

Tel: 740 21 411 92 23 TKFomer 58, 46b Du-mui Tabere S. sector 6, Budapest, Romania

www.reinflor-europe.com

▶ SLOVENIA Tel. +386 (0) | 561 66 30

Jedek Tracovna Servis d.o.o., Cesta 24 June 21, 2011 LIJBLANA - Čmute

Republica Slovenia, www.rupingun-europe.com

▶ GREECE Tel +20 210 94 10 688

Tel. +30 210 94 10 679 D.A.I. BANKAUJES S.A. Invest Agencies, 44 Zebrou st.

www.rumington-europe.com

REMINGTON HC5030 Performer - Model No. HC5030 - 10

REMINGTON HC5030 Performer - Model No. HC5030 - 11

ENGLISH

Thank you for choosing Remington ^® . Our products are designed to meet the highest standard of quality, functionality and design. We hope you enjoy using your new Remington ^® product.

Please read the instructions for use carefully and keep in a safe place for future reference.

REMINGTON HC5030 Performer - ENGLISH - 1

CAUTION

Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Remington ^® .

Do not use this product if it is not working correctly, if it has been dropped or damaged, or dropped into water.

REMINGTON HC5030 Performer - CAUTION - 1

REMINGTON HC5030 Performer - CAUTION - 2

DESCRIPTION

  1. On/off switch
  2. Removable Blade set
  3. Taper lever (6 positions, 0.5-2mm)
  4. II attachment guide combs

3 year guarantee

ENGLISH

REMINGTON HC5030 Performer - ENGLISH - 1

HOW TO USE

Before starting the cut

Inspect the clipper making sure that it is free from hair and dirt.

To attach a comb

▶ Hold the comb with its teeth upward
▶ Slide it onto and along the clipper blade until the front of the comb firmly sits against the clipper blade.

To remove the comb

▶ Holding the clipper with the blades facing away from you, firmly push the comb upward and away from the blades.

Comb Attachments Hair Length

Each comb attachment is marked accordingly on its outside middle surface (3mm, 6mm, 12mm, 15mm, 18mm, 25mm, and 30mm). 0.5mm length is achieved without any combs

REMINGTON HC5030 Performer - Comb Attachments Hair Length - 1

INSTRUCTIONS FOR HAIR CUTTING

STEP I - Nape of the neck - PICTURE I

▶ Use 3mm or 6mm guide comb.
Hold the clipper with the blade teeth pointing upwards. Begin starting at the centre of the head at the base of the neck.
▶ Slowly lift the clipper, working upwards and outwards through the hair, trimming just a little at a time.

STEP 2 - Back of the head - PICTURE 2

With the 12mm, 15mm or 18mm guide comb attached, cut the hair at the back of the head.

STEP 3 - Side of the head - PICTURE 3

With the 3mm or 6mm guide comb attached, trim sideburns. Then change to the longer 9mm or 12mm guide comb and continue to cut to the top of the head.

STEP 4 - Top of the head - PICTURE 4

With the 18mm, 25mm, 30mm guide comb attached, cut hair on top of the head against the direction in which the hair normally grows.
For longer hair on top, use without a guide comb. Lift the hair on top of the head with a small hand comb. Cut over the hand comb with the hair lifted or hold the hair between the fingers to lift it and cut it to the desired length.
▶ Always work from the back of the head.

ENGLISH

STEP 5 – The finishing touches – PICTURE 5

▶ Use the clipper without an attachment comb for close trimming around the base and sides of the neck. Use the ear comb guides to get a clean line around each ear. For the required ear comb guide, angle the clipper and lightly stroke around each ear to the back of the neck.
To produce a clean straight line at the sideburns, reverse the hair clipper. Place the reversed clipper at right angles to the head, tips of the blades lightly touching the skin and then work downwards.

TAPER LEVER (DIAGRAM 6)

This product has a taper lever located at the left side of the clipper near the blades. Adjust the lever to change the closeness of the cut gradually and also to improve the effectiveness of the comb attachments. The taper lever also extends the life of the blades because a different cutting edge is used in each setting.

REMINGTON HC5030 Performer - TAPER LEVER (DIAGRAM 6) - 1

CARE FOR YOUR HAIRCLIPPER

Your clipper is fitted with high quality titanium blades that are permanently lubricated. To ensure long lasting performance of your clipper, clean the blades and unit regularly. Always keep the protective cap on the clipper blade.

AFTER EACH USE

▶ Ensure the clipper is switched off and disconnected from the mains.
Brush the accumulated hair from the blades. Do not submerge the clipper in water.
To clean the unit, wipe with a damp cloth and dry immediately.
To reattach, line up the locating tab and then push blade set back onto main unit.

Note: Ensure that the clipper is turned off when cleaning.

EVERY SIX MONTHS

At regular intervals the Blade Set should be removed and cleaned.

Remove the 2 screws retaining the fixed blade with a screwdriver. Do not remove blade set.
Brush out hairs from between the blades with soft cleaning brush. Do not remove the lubricating grease from the blades. Do not remove the small moving blade.
Before fully tightening the 2 screws, adjust the taper lever to the lower position and align the blades so that their cutting edges are parallel to one another. Tighten the 2 screws.
Note that if the blades are not correctly aligned then cutting efficiency will be impaired.

CAUTION:

Do not use liquid cleaners on the blades or harsh or corrosive chemicals on the blade casing. Always use a soft brush to remove the accumulated hairs.

▶ Always store this appliance in a moisture-free area.

▶ Do not wrap the cord around the appliance.

ENGLISH

REMINGTON HC5030 Performer - ENGLISH - 1

TROUBLESHOOTING

If blades do not seem to cut hair easily, the taper lever (DIAGRAM 6) can be used to remove any hair caught between the comb and blade. Switch the clipper on and move the taper lever up and down a few times but do not force the lever in either direction. This should remove hairs and restore the cutting efficiency. If not, contact your nearest Remington ^® Service Centre.

REMINGTON HC5030 Performer - TROUBLESHOOTING - 1

IMPORTANT SAFETY INSTRUCTIONS

WARNING - TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR INJURY TO PERSONS:

An appliance should never be left unattended when plugged into a power outlet.

Keep the power plug and cord away from heated surfaces.

Make sure the power plug and cord do not get wet.

Do not plug or unplug the shaver with wet hands.

Do not use the product with a damaged cord.

Use and store the product at a temperature between 15^ C and 35^ C.

Always unplug from the mains when cleaning.

▶ Only use the parts supplied with the appliance.

Keep this product out of reach of children. The use of this appliance by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge can give cause to hazards. Persons responsible for their safety should give explicit instructions or supervise the use of the appliance.

REMINGTON HC5030 Performer - WARNING - TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR INJURY TO PERSONS: - 1

PROTECT THE ENVIRONMENT

Do not dispose the clipper in household waste at the end of its useful life. Disposal can take place at our service centres or appropriate collection sites.
CAUTION:

Do not put in fire or mutilate your battery packs as they may burst or release toxic materials.

REMINGTON HC5030 Performer - PROTECT THE ENVIRONMENT - 1

For further information on recycling see www.remington-europe.com

ENGLISH

REMINGTON HC5030 Performer - ENGLISH - 1

SERVICE AND WARRANTY

This product has been checked and is free of defects. We warrant this product against any defects that are due to the faulty material or workmanship for a 3 year period from the original date of consumer purchase. If the product should become defective within the warranty period, we will repair any such defect or elect to replace the product or any part of it without charge provided there is proof of purchase. This does not mean an extension of the warranty period.

In the case of a warranty simply call the REMINGTON ^® Service Center in your region.

This warranty is offered over and above your normal statutory rights.

The warranty shall apply in all countries in which our product was sold via an authorised dealer.

This warranty does not include cutters which are consumable parts. Also not covered is damage to the product by accident or misuse, abuse, alteration to the product or use inconsistent with the technical and/or safety instructions required. This warranty shall not apply if the product has been dismantled or repaired by a person not authorised by us.

REMINGTON HC5030 Performer - SERVICE AND WARRANTY - 1

DEUTSCH

PASO I - Nuca - DIAGRAMA I

▶ Utilice la guía de corte de 3 mm o 6 mm.

ALAVANCA (DIAGRAMA 6)

DÔLEŽITÉ BEZPEČNOSTNÉ POKYNY

UPOZORNENIE – ZNIŽOVANIE RIZIKA POPÁLENIA, SMRTI SPÔSOBENEJ ELEKTRICKÝM PRÚDOM, POŽIARU ALEBO ZRANENIA OSÔB:

İNCELTME KOLU (RESİM 6)

VAŽNE SIGURNOSNE UPUTE

UPOZORENJE – KAKO BISTE SMANJILI RIZIK OD OPEKLINA, UDARA STRUJE, POŽARA ILI OZLJEDA OSOBA:

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : REMINGTON

Model : HC5030 Performer

Category : Lawn mower