MOS-2120-Z1101E - Computers Advantech - Free user manual and instructions

USER MANUAL MOS-2120-Z1101E Advantech

MOS-2120-Z1101E is a GbE LAN expansion kit, it power by Intel I210 controller. Deisgn for high-quality electronic component developed and manufactured.

The form factor of MOS-2120-Z1101E LAN module is designed the full-size Mini PCIe, it compliant with PCI ExpressTM 2.1, support 1Gb/s data speed and follows IEEE802.3,802.3u,802.3ab standard.

Moreover, MOS-2120-Z1101E supports Wake on LAN function, IEEE 802.1P Layer 2 Priority Encoding, and IEEE 802.1Q VLAN insertion and removal.

1. Packing List

MOS-2120-Z1101E

LAN controller miniPCIe card x1
RJ 45 Wire cable with I/O bracket x1
Startup Manual x 1

Note: If any of these items are missing or damaged, please contact your distributor or sales representative immediately.

2. Initial Inspection

You should find the following items inside the shipping package:

LAN controller miniPCIe card miniPCIe card
RJ 45 Wire cable with I/O bracket
Startup Manual x 1

The MOS-2120-Z1101E card harbors certain electronic components vulnerable to electrostatic discharge (ESD). ESD could easily damage the integrated circuits and certain components if preventive measures are not carefully paid attention to.

Before removing the card from the antistatic plastic bag, you should take following precautions to ward off possible ESD damage:

Touch the metal part of your computer chassis with your hand to discharge static electricity accumulated on your body. Or one can also use a grounding strap.

Touch the anti-static bag to a metal part of your computer chassis before opening the bag.

Take hold of the card only by the metal bracket when removing it out of the bag.

After taking out the card, first you should:

Inspect the card for any possible signs of external damage (loose or damaged components, etc.). If the card is visibly damaged, please notify our service department or our local sales representative immediately. Avoid installing a damaged card into your system.

Also pay extra caution to the following aspects to ensure proper installation:

Avoid physical contact with materials that could hold static electricity such as plastic, vinyl and Styrofoam.
Whenever you handle the card, grasp it only by its edges. DO NOT TOUCH the exposed metal pins of the connector or the electronic components.

Note!

Keep the anti-static bag for future use. You might need the original bag to store the card if you have to remove the card from PC or transport it elsewhere.

3. Installation & Setup

3.1 Driver Installation

For MOS-2120-Z1101E driver download, please visit Advantech website:

http://support.advantech.com/Support/SearchResult.aspx?keyword=MOS-2120-Z1101E&searchtabs=BIOS,Certificate,Datasheet,Driv

er,Firmware,Manual,Online%20Training,Soware%20Utility,Ulity,FAQ,Installaon,Soware%20API,Soware%20API%20Manual,3D

%20Model

4. Signal Connections

4.1 Switch and Jumper Settings

GigaLAN port (CN1) Pulse HX6062FNL 1328-OLT CHINA

Figure 4.1: Card Connector, Jumper and Switches

2.90 0 2.90 27.10 30 3-ø4 3-ø2.60 2.90 25.60 50.95 t = 1

Figure 4.2: Physical Dimension

4.2 Signal connections

4.2.1 Pin Assignment

The pins are numbered as shown in the table below. The GigaLAN Pin has reserved the LED signal for external usage. It provides a standard RJ-45 jack connector with LED indicators on the front side to show its Active/Link status (Green LED) and Speed status (Yellow LED).

Figure 4.3: RJ45 Connector

Table 4.1: MOS-2120-Z1101E Pin Definition

Pin #	Signal Name	Pin #	Signal Name
1	MDO0+	2	MDO0-
3	MDO1+	4	MDO2+
5	MDO2-	6	MDO1-
7	MDO3+	8	MDO3-