SA809 - Wall mount SANUS - Free user manual and instructions

USER MANUAL SA809 SANUS

Technical line drawings of a device housing and casing components (no text or symbols)

SA809 INSTRUCTION MANUAL

We'll Make It Stress-Free

If you have any questions along the way, just give us a call.

1-800-359-5520. We're ready to help!

Scan for more information

san.us/448

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE

Before getting started, let's make sure this product is perfect for you!

1

Will your accessories weigh more than 30 lb (13.6 kg)?

No—Perfect!

Yes— This product is NOT compatible. Visit Sanus.com or call 1-800-359-5520 [UK: 0800 056 2853] to find a compatible product.

2

What is your wall made of?

Drywall with wood studs

Perfect!

Unsure? Call 1-800-359-5520 [UK: 0800 056 2853]

3

Do you have all of the tools needed?

4

Ready to begin?

Please read through these instructions completely to be sure you're comfortable with this easy install process.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service at 1-800-359-5520 [UK: 0800 056 2853].

CAUTION: Avoid potential personal injuries and property damage!

• Do not use this product outdoors
• This in-wall system is for use with ITE or Audio/Video equipment only
• The maximum specified ambient temperature of the cabinet system is 40o - 120oF (4o - 49oC)
• Do not use this product for any purpose not explicitly specified by manufacturer
  ● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Supplied Parts

WARNING! This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

STEP 1 Parts Template CUTTING TEMPLATE HERE WE GO 01

STEP 3 Parts Housing 02

ECO-Mini Bracket 03 Elastic-Velcro Strap 05 (2) Component Panel 04 Cover 06

STEP 1 Cut Hole for Housing

CAUTION: Avoid potential personal injuries and property damage!

- Drywall covering the wall must not exceed 16 mm (5/8 in.).

- Box must be mounted between studs that are at least 406 mm (16 in.) apart. After installation there will not be enough space between the SA809 and the studs for electrical wires/cables, plumbing, ductwork, or insulation. Choose your SA809 location carefully.

1. Locate the studs using an edge-to-edge stud finder. Verify the edges of the studs using an awl or thin nail. Mark the edges of the studs with pencil.
2. Center the template 01 between the two studs. Level the template 01 and use a pencil to mark the open area of the template 01.

≤ 16 mm (5/8 in.) 406 mm 16 in.

2 Labeled CUTTING TEMPLATE HERE WE GO? 01

STEP 1 Cut Hole for Housing cont.

1. Use a drywall saw or similar tool to cut the drywall where marked. Remove cut section of drywall.

WARNING! ELECTRICAL SHOCK HAZARD! CUTTING OR DRILLING INTO ELECTRICAL WIRES OR CABLES CAN CAUSE DEATH OR SERIOUS PERSONAL INJURY! Always make certain the area behind mounting surfaces is free of electrical wires and cables before cutting, drilling, or installing fasteners.
WARNING! EXPLOSION AND FIRE HAZARD! CUTTING OR DRILLING INTO GAS PLUMBING CAN CAUSE DEATH OR SERIOUS PERSONAL INJURY! Always make certain the area behind mounting surfaces is free of gas, water, waste, or any other plumbing before cutting, drilling, or installing fasteners.
4. Install wires and cables.

Technical illustration showing a tool and a 3D box assembly with an inset view of the same object (no text or symbols present)

Illustration of two electrical control panels with wires, no text or symbols present

STEP 2 Install Housing

1. Break out the sections of the housing 02. Optionally, install a UL Listed 120 VAC electrical outlet box (not included) capable of attaching to the SA809 housing 02 following the instructions included with the outlet box.

NOTE: Knockouts are provided for ease of installation. Any unused knockouts that have been punched are to be closed up with a metal plug.

1. Carefully fit the housing 02 into the cutout section of the wall.

1 02 RANUS

2 02

STEP 2 Install Housing cont.

1. Using a screwdriver, turn the screws in the corners of the housing 02. These will raise the locking tabs in the rear of the housing 02 to secure it to the wall. Tighten only until secure. Do not over-tighten screws.

3 BANU 02 View Behind the Wall 02

STEP 3 Install Components

ECO-Mini (purchased separately) with the SA809 - Optional

NOTE: Minimum spacings between the accessories and components and the housing for Information Technology Communication Equipment shall be maintained for safe operation of the equipment when installed in accordance with the National Electric Code, ANSI/NFPA 70-1999. Refer to communication equipment manufacturer's specifications for minimum spacings.

1. To use the ECO-Mini (purchased separately) in the SA809, first remove feet.
2. Fit the ECO-Mini into the ECO-Mini bracket 03 supplied with the SA809.

Mechanical assembly diagram showing a screwdriver inserted into a rectangular housing (no text or symbols visible)

2 03

STEP 3 Install Components cont.

ECO-Mini (purchased separately) with the SA809 - Optional

1. Use two of the screws from the feet to secure the ECO-Mini in the bracket 03.
2. Slide the ECO-Mini and bracket 03 into the top of the housing 02. Lock the bracket 03 into the housing 02 by sliding it towards the corner until you feel it catch.

Technical illustration of a mechanical device with labeled components and a tool (no text or symbols beyond labels)

4 03 02

STEP 3 Install Components cont.

1. Use elastic-velcro straps 05 to attach components to the front of the component panel 04 and to secure wires to the back of the panel.

NOTE: Zip ties can also be used by looping them through the holes of the component panel 04 to secure components to the component panel 04.

5

05 7 04 05 BASU

05 05 04

STEP 3 Install Components cont.

1. To mount the component panel 04, press the component panel 04 into the housing 02 until the side buttons "snap" into the depressions in the sides of the housing 02.

6 BANUS 02 BANUS 04

To remove component panel 04 grasp panel in the center and pull straight out. 04 02

STEP 3 Install Components cont.

1. Install cover 06 by fitting the bottom tabs of the cover 06 into the bottom slots of the housing 02. Press near the upper tabs of the cover 06 to "snap" them into the upper slots of the housing 02.

7

02 GASUS 06

06

Positioning

The SA809 can be installed behind most large wall plates of wall mounts. To access the SA809 after installation, disconnect all cables and wires from the TV, then either slide or remove the arm or TV mount from the wall plate.

IMPORTANT: Check your TV owner's manual to see if there are any special requirements for mounting or removing your TV.

Technical line drawing of a mechanical assembly with curved brackets and a central panel (no text or symbols)

Technical line drawing of a mechanical device with internal components and an arrow indicating direction (no text or symbols)

Dimensions

SNNS 14.2 in. [360.7 mm] 11.40 in. [289.6 mm] 8.84 in. [224.6 mm] 14.07 in. [357.5 mm] 16.63 in. [422.4 mm]

2.87 in. [72.9 mm] 0.75 in. [19.1 mm] 3.92 in. [99.6 mm] 4.00 in. [101.6 mm]

ESPAÑOL

Thank you for choosing Sanus! Please take a moment to let us know how we did:

Call us: 1-800-359-5520

UK: 0800 056 2853

Email us: [e-mail] Leave a review: sanus.com

Find us on Facebook: SANUS Follows on Twitter @sanussystems

Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

©2013 Milestone AV Technologies. All rights reserved. Sanus is a division of Milestone.

All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA

6901-002316 01