KPC-N701NU18W - Security Camera KT&C - Free user manual and instructions

USER MANUAL KPC-N701NU18W KT&C

Black cylindrical security camera with mounted sensor and antenna (no visible text or symbols)

Thank you for choosing our high quality camera. Before attempting to connect operate this unit, please read and follow these instructions.

M117-N701-001

HIGH PERFORMANCE

Super Night Vision Camera

OPERATION MANUAL

Black cylindrical security camera with mounted sensor and antenna (no visible text or symbols)

Thank you for choosing our high quality camera. Before attempting to connect operate this unit, please read and follow these instructions.

CAUTION

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. In USA and Canada, Use Class 2 Power Supply Only

CONTENTS

1. CAUTIONS
2. IMPORTANT SAFETY INSTRUCTIONS
3. FEATURES
4. COMPONENTS
5. NAME AND FUNCTION
6. INSTALLATION
7. DIMENSIONS
8. SPECIFICATION
9. OSD MANUAL
10. COMMUNICATION PROTOCOL

1. CAUTIONS

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

Interference that may cause undesired operation

Note

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 10 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense."

WARNING

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Caution

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

CAUTION

1. A regulated DC12V 1A power supply is recommended for use with this camera.

for the best picture and the most elastic operation.

An unregulated power supply can cause damage to the camera.

When unregulated power supply is applied, product warranty will be

out of subject.

1. It is recommended that the camera is used with a monitor that has a CCTV qualify

75 video impedance level

If your similar is suffered in high impedance then phone actual screaming.

1. DO NOT attempt to disassemble the cameras to gain access to the internal companies.

Refer servicing to your dealer.

1. Never escape the camera towards the sun or any eye of receive light, which may

cause sinner on the picture and possible damage to the CCD.

1. CAUTIONS

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes purchased this product, or their local government office, for details of where and how they can take them for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. Household users should contact either the retailer where they for disposal.

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance

2. IMPORTANT SAFETY INSTRUCTION

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, sleeves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the car, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a car is used, use caution when moving the car/apperatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply core or plug is damaged. Liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3. FEATURES

• 1/3" 960H SONY EXVIEW HAD CCD III

+High Resolution of 700TV Lines

- OSD Function

• Multi Language

(ENGLISH CHINESE RUSSIAN, SPANISH GERMAN, FRENCH, PORTUGUESE JAPANESE)

-2DNR

• Privacy Zone / Motion Detect

- Smart IR

• DC12V / AC24V Dual Voltage

• ATR/Adaptive Tone-curve Reproduction / Digital WDR)

The function provides gradation compensation to improve the contrast of subjects both

Lay-attentness areas and high latencies areas exist in the same picture

1. COMPONENTS

5. NAME AND FUNCTION

Sunshield Frame Capacitor Thru Bracket 1.113-45mm Photo cell 1 Body

• Service Video connector & OSD Joystick

CONTROL FUNCTION (ON/OPTION) LEFT RIGHT DCALL 500A

B

5. NAME AND FUNCTION

- Heater

Built in heater protects the camera from low temperature. (Operating temperature with Heater, -40 °C)

• External Zoom & Focus Adjustable

9

6. INSTALLATION

- MOUNTING POSITION

90 TUT 360 PAV

90° TLI 300% PA/N

6. INSTALLATION

■ MONITOR CONNECTION

7. DIMENSIONS

Unit mm

15.250 M24609 100 115R M233 M2407 15 15 105 105 0.47 12

15.250 M24609 100 115R M233 M2407 15 15 105 105 0.47 12

1. SPECIFICATION

Signal format: H2C2V
Image Device: 126"66H / 50VY (Extrax H2O) OCH II
Scanning System 2.1 Inertage
Scanning Frequency to ( 48Hz/K) ,10Hz/K/V to ( 62Hz/K) ,MHz/V
Total Packs 1000(H) X 1000(V) 1000(H) X 100V
Effective Fluids 9x8x9 (X 40Hz Y 4x8.5 Hz)
Electronic Shutter Speed 1500cc / 100 sec
H Period on 70V TV Linear
20V Rate More than 20Hz/AGC OFF
Min Dimension LED On 0.1 Bus
Type System Internal
Gamma	× 45
Video Output Level	1.0 V=0.1 Compact (750)
OBO	Built-in Installation
ELO	OFF/BLO/HLO
20VIR OFFOR(Lowd adjustment)
ATR	OFF/OFF/Level (up to 20Hz)
SMART IR	On/Off
With a Balance	ATW/PUSH/MANUL/PUSH-DOCK
Primary Timing	A Zones
Main Duration	A Zones
Day & Night(DR)	AUDI Center /BW
Language	ENGLISH, CHINESE, RUSSEAL SPARSEST CEVINAS, FRNCH Portugal, JAPANESE
IP Rating	1WD (Under posts)
IR I/O	100 cm, 4bps
IR I/O Balance	Up to NM
Counting Temperature	14°F-122°F; 12°C+90°C / House On; -40°F-122°F; -40°C~50°C)
Storage Temperature	4°F-140°F (20°C~80°C)
Tempidity	Less than 10%
Power Consumption	DC35V (10Pa) Mass (10mA, 1.1kJ) lower Dq (625V) (10Pa) Max (10V, 21kJ) lower Dq
Lanes	Vertical Lane
Dimensions	66.8W×10.8×10.8×110.45"
Weight	Approx. 90Hz
Color	RS 48s, Holes

Specifications and designs are subject to change for improving the functionality of this product without notice.

9. OSD MANUAL

GENERAL STRUCTURE

graph TD
    A["输入数据"] --> B["POS 数据"]
    B --> C["ADC模块"]
    C --> D["数据存储"]
    D --> E["数据处理"]
    E --> F["数据存储与输出"]
    F --> G["数据存储与输出"]
    G --> H["数据存储与输出"]
    H --> I["数据存储与输出"]
    I --> J["数据存储与输出"]
    J --> K["数据存储与输出"]
    K --> L["数据存储与输出"]
    L --> M["数据存储与输出"]
    M --> N["数据存储与输出"]
    N --> O["数据存储与输出"]
    O --> P["数据存储与输出"]
    P --> Q["数据存储与输出"]
    Q --> R["数据存储与输出"]
    R --> S["数据存储与输出"]
    S --> T["数据存储与输出"]
    T --> U["数据存储与输出"]
    U --> V["数据存储与输出"]
    V --> W["数据存储与输出"]
    W --> X["数据存储与输出"]
    X --> Y["数据存储与输出"]
    Y --> Z["数据存储与输出"]

9. OSD MANUAL

graph TD
    A["IMAGE"] --> B["TITLE"]
    A --> C["DATA Collection"]
    C --> D["DATA Analysis"]
    D --> E["Analysis"]
    E --> F["Analysis"]
    F --> G["Analysis"]
    G --> H["Analysis"]
    H --> I["Analysis"]
    I --> J["Analysis"]
    J --> K["Analysis"]
    K --> L["Analysis"]
    L --> M["Analysis"]
    M --> N["Analysis"]
    N --> O["Analysis"]
    O --> P["Analysis"]
    P --> Q["Analysis"]
    Q --> R["Analysis"]
    R --> S["Analysis"]
    S --> T["Analysis"]
    T --> U["Analysis"]
    U --> V["Analysis"]
    V --> W["Analysis"]
    W --> X["Analysis"]
    X --> Y["Analysis"]
    Y --> Z["Analysis"]
    Z --> AA["Analysis"]
    AA --> AB["Analysis"]
    AB --> AC["Analysis"]
    AC --> AD["Analysis"]
    AD --> AE["Analysis"]
    AE --> AF["Analysis"]
    AF --> AG["Analysis"]
    AG --> AH["Analysis"]
    AH --> AI["Analysis"]
    AI --> AJ["Analysis"]
    AJ --> AK["Analysis"]
    AK --> AL["Analysis"]
    AL --> AM["Analysis"]
    AM --> AN["Analysis"]
    AN --> AO["Analysis"]
    AO --> AP["Analysis"]
    AP --> AQ["Analysis"]
    AQ --> AR["Analysis"]
    AR --> AS["Analysis"]
    AS --> AT["Analysis"]
    AT --> AU["Analysis"]
    AU --> AV["Analysis"]
    AV --> AW["Analysis"]
    AW --> AX["Analysis"]
    AX --> AY["Analysis"]
    AY --> AZ["Analysis"]
    AZ --> BA["Analysis"]
    BA --> BB["Analysis"]
    BB --> BC["Analysis"]
    BC --> BD["Analysis"]
    BD --> BE["Analysis"]
    BE --> BF["Analysis"]
    BF --> BG["Analysis"]
    BG --> BH["Analysis"]
    BH --> BI["Analysis"]
    BI --> BJ["Analysis"]
    BJ --> BK["Analysis"]
    BK --> BL["Analysis"]
    BL --> BM["Analysis"]
    BM --> BN["Analysis"]
    BN --> BO["Analysis"]
    BO --> BP["Analysis"]
    BP --> BQ["Analysis"]
    BQ --> BR["Analysis"]
    BR --> BS["Analysis"]
    BS --> BT["Analysis"]
    BT --> BU["Analysis"]
    BU --> BV["Analysis"]
    BV --> BW["Analysis"]
    BW --> BX["Analysis"]
    BX --> BY["Analysis"]
    BY --> BZ["Analysis"]
    BZ --> CA["Analysis"]
    CA --> CB["Analysis"]
    CB --> CC["Analysis"]
    CC --> CD["Analysis"]
    CD --> CE["Analysis"]
    CE --> CF["Analysis"]
    CF --> CG["Analysis"]
    CG --> CH["Analysis"]
    CH --> CI["Analysis"]
    CI --> CJ["Analysis"]
    CJ --> CK["Analysis"]
    CK --> CL["Analysis"]
    CL --> CM["Analysis"]
    CM --> CN["Analysis"]
    CN --> CO["Analysis"]
    CO --> CP["Analysis"]
    CP --> CQ["Analysis"]

1. OSD MANUAL

SANDERI SABB SABB GABB
MELK
POTATO MELK POTATO
LPG GROUP	GROWTH GREEN GREEN BLUE RED WHITE RED COLDEN GREEN GREEN YELLOW GREEN GREEN BLACK GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN YELLOW GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-yellow GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN-white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN silver GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN white GREEN GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black GREEN black<|content_end|>

1. OSD MANUAL

SALADY	LTRR2-7016	B: 5.35 - 1.45 - 1.85 - 2.15 - 2.45 - 2.75 - 3.15 - 3.45 - 3.75 - 4.15 - 4.45 - 4.75 - 5.15 - 5.45 - 5.75 - 6.15 - 6.45 - 6.75 - 7.15 - 7.45 - 7.75 - 8.15 - 8.45 - 8.75 - 9.15 - 9.45 - 9.75 - 10.15 - 10.45 - 10.75 - 11.15 - 11.45 - 11.75 - 12.15 - 12.45 - 12.75 - 13.15 - 13.45 - 13.75 - 14.15 - 14.45 - 14.75 - 15.15 - 15.45 - 15.75 - 16.15 - 16.45 - 16.75 - 17.15 - 17.45 - 17.75 - 18.15 - 18.45 - 18.75 - 19.15 - 19.45 - 19.75 - 20.15 - 20.45 - 20.75 - 21.15 - 21.45 - 21.75 - 22.15 - 22.45 - 22.75 - 23.15 - 23.45 - 23.75 - 24.15 - 24.45 - 24.75 - 25.15 - 25.45 - 25.75 - 26.15 - 26.45 - 26.75 - 27.15 - 27.45 - 27.75 - 28.15 - 28.45 - 28.75 - 29.15 - 29.45 - 29.75 - 30.15 - 30.45 - 30.75 - 31.15 - 31.45 - 31.75 - 32.15 - 32.45 - 32.75 - 33.15 - 33.45 - 33.75 - 34.15 - 34.45 - 34.75 - 35.15 - 35.45 - 35.75 - 36.15 - 36.45 - 36.75 - 37.15 - 37.45 - 37.75 - 38.15 - 38.45 - 38.75 - 39.15 - 39.45 - 39.75 - 40.15 - 40.45 - 40.75 - 41.15 - 41.45 - 41.75 - 42.15 - 42.45 - 42.75 - 43.15 - 43.45 - 43.75 - 44.15 - 44.45 - 44.75 - 45.15 - 45.45 - 45.75 - 46.15 - 46.45 - 46.75 - 47.15 - 47.45 - 47.75 - 48.15 - 48.45 - 48.75 - 49.15 - 49.45 - 49.75 - 50.15 - 50.45 - 50.75 - 51.15 - 51.45 - 51.75 - 52.15 - 52.45 - 52.75 - 53.15 - 53.45 - 53.75 - 54.15 - 54.45 - 54.75 - 55.15 - 55.45 - 55.75 - 56.15 - 56.45 - 56.75 - 57.15 - 57.45 - 57.75 - 58.15 - 58.45 - 58.75 - 59.15 - 59.45 - 59.75 - 60.15 - 60.45 - 60.75 - 61.15 - 61.45 - 61.75 - 62.15 - 62.45 - 62.75 - 63.15 - 63.45 - 63.75 - 64.15 - 64.45 - 64.75 - 65.15 - 65.45 - 65.75 - 66.15 - 66.45 - 66.75 - 67.15 - 67.45 - 67.75 - 68.15 - 68.45 - 68.75 - 69.15 - 69.45 - 69.75 - 70.15 - 70.45 - 70.75 - 71.15 - 71.45 - 71.75 - 72.15 - 72.45 - 72.75 - 73.15 - 73.45 - 73.75 - 74.15 - 74.45 - 74.75 - 75.15 - 75.45 - 75.75 - 76.15 - 76.45 - 76.75 - 77.15 - 77.45 - 77.75 - 78.15 - 78.45 - 78.75 - 79.15 - 79.45 - 79.75 - 80.15 - 80.45 - 80.75 - 81.15 - 81.45 - 81.75 - 82.15 - 82.45 - 82.75 - 83.15 - 83.45 - 83.75 - 84.15 - 84.45 - 84.75 - 85.15 - 84.45 - 84.75 - 85.15 - 85.45 - 85.75 - 86.15 - 86.45 - 86.75 - 87.15 - 87.45 - 87.75 - 88.15 - 88.45 - 88.75 - 89.15 - 89.45 - 89.75 - 90.15 - 90.45 - 90.75 - 91.15 - 91.45 - 91.75 - 92.15 - 92.45 - 92.75 - 93.15 - 93.45 - 93.75 - 94.15 - 94.45 - 94.75 - 95.15 - 94.45 - 94.75 - 95.15 - 95.45 - 95.75 - 96.15 - 96.45 - 96.75 - 97.15 - 97.45 - 97.75 - 98.15 - 98.45 - 98.75 - 99.15 - 99.45 - 99.75 - 99.15 - 99.45 - 99.75 - 99.45 - 99.75 - 99.45 - 99.75 - 99.45 - 99.75 - 99.45 - 99.75 - 99.45 - 99.75 - 99.45 - 99.75 - 99.45 - 99.75
SALADY	LTRR2-7016	B: 5.35 - 1.45 - 1.85 - 2.15 - 2.45 - 2.75 - 3.15 - 3.45 - 3.75 - 4.15 - 4.45 - 4.75 - 5.15 - 5.35 - 5.65 - 6.15 - 6.35 - 6.65 - 7.15 - 7.35 - 7.65 - 7.85 - 8.15 - 8.35 - 8.65 - 8.85 - 9.15 - 9.35 - 9.65 - 9.85 - 10.15 - 10.35 - 10.65 - 10.85 - 11.15 - 11.35 - 11.65 - 11.85 - 12.15 - 12.35 - 12.65 - 12.85 - 13.15 - 13.35 - 13.65 - 13.85 - 14.15 - 14.35 - 14.65 - 14.85 - 15.15 - 15.35 - 15.65 - 15.85 - 16.15 - 16.35 - 16.65 - 16.85 - 17.15 - 17.35 - 17.65 - 17.85 - 18.15 - 18.35 - 18.65 - 18.85 - 19.15 - 19.35 - 19.65 - 19.85 - 20.15 - 20.35 - 20.65 - 20.85 - 21.15 - 21.35 - 21.65 - 21.85 - 22.15 - 22.35 - 22.65 - 22.85 - 23.15 - 23.35 - 23.65 - 23.85 - 24.15 - 24.35 - 24.65 - 24.85 - 25.15 - 25.35 - 25.65 - 25.85 - 26.15 - 26.35 - 26.65 - 26.85 - 27.15 - 27.35 - 27.65 - 27.85 - 28.15 - 28.35 - 28.65 - 28.85 - 29.15 - 29.35 - 29.65 - 29.85 - 29.95 - 30.15 - 30.35 - 30.65 - 30.85 - 31.15 - 31.35 - 31.65 - 31.85 - 32.15 - 32.35 - 32.65 - 32.85 - 33.15 - 33.35 - 33.65 - 33.85 - 34.15 - 34.35 - 34.65 - 34.85 - 35.15 - 35.35 - 35.65 - 35.85 - 36.15 - 36.35 - 36.65 - 36.85 - 37.15 - 37.35 - 37.65 - 37.85 - 38.15 - 38.35 - 38.65 - 38.85 - 39.15 - 39.35 - 39.65 - 39.85 - 39.95 - 40.15 - 40.35 - 40.65 - 40.85 - 41.15 - 41.35 - 41.65 - 41.85 - 42.15 - 42.35 - 42.65 - 42.85 - 43.15 - 43.35 - 43.65 - 43.85 - 44.15 - 44.35 - 44.65 - 44.85 - 45.15 - 45.35 - 45.65 - 45.85 - 46.15 - 46.35 - 46.65 - 46.85 - 47.15 - 47.35 - 47.65 - 47.85 - 48.15 - 48.35 - 48.65 - 48.85 - 49.15 - 49.35 - 49.65 - 49.85 - 49.95 - 50.15 - 50.35 - 50.65 - 50.85 - 51.15 - 51.35 - 51.65 - 51.85 - 52.15 - 52.35 - 52.65 - 52.85 - 53.15 - 53.35 - 53.65 - 53.85 - 54.15 - 54.35 - 54.65 - 54.85 - 55.15 - 55.35 - 55.65 - 55.85 - 56.15 - 56.35 - 56.65 - 56.85 - 57.15 - 57.35 - 57.65 - 57.85 - 58.15 - 58.35 - 58.65 - 58.85 - 59.15 - 59.35 - 59.65 - 59.85 - 59.95 - 60.15 - 60.35 - 60.65 - 60.85 - 61.15 - 61.35 - 61.65 - 61.85 - 62.15 - 62.35 - 62.65 - 62.85 - 63.15 - 63.35 - 63.65 - 63.85 - 64.15 - 64.35 - 64.65 - 64.85 - 65.15 - 65.35 - 65.65 - 65.85 - 66.15 - 66.35 - 66.65 - 66.85 - 67.15 - 67.35 - 67.65 - 67.85 - 68.15 - 68.35 - 68.65 - 68.85 - 69.15 - 69.35 - 69.65 - 69.85 - 69.95 - 70.15 - 70.35 - 70.65 - 70.85 - 71.15 - 71.35 - 71.65 - 71.85 - 72.15 - 72.35 - 72.65 - 72.85 - 73.15 - 73.35 - 73.65 - 73.85 - 74.15 - 74.35 - 74.65 - 74.85 - 75.15 - 75.35 - 75.65 - 75.85 - 76.15 - 76.35 - 76.65 - 76.85 - 77.15 - 77.35 - 77.65 - 77.85 - 78.15 - 78.35 - 78.65 - 78.85 - 79.15 - 79.35 - 79.65 - 79.85 - 79.95 - 80.15 - 80.35 - 80.65 - 80.85 - 81.15 - 81.35 - 81.65 - 81.85 - 82.15 - 82.35 - 82.65 - 82.85 - 83.15 - 83.35 - 83.65 - 83.85 - 84.15 - 84.35 - 84.65 - 84.85 - 85.15 - 85.35 - 85.65 - 85.85 - 86.15 - 86.35 - 86.65 - 86.85 - 87.15 - 87.35 - 87.65 - 87.85 - 88.15 - 88.35 - 88.65 - 88.85 - 89.15 - 89.35 - 89.65 - 89.85 - 89.95 - 90.15 - 90.35 - 90.65 - 90.85 - 91.15 - 91.35 - 91.65 - 91.85 - 92.15 - 92.35 - 92.65 - 92.85 - 93.15 - 93.35 - 93.65 - 93.85 - 94.15 - 94.35 - 94.65 - 94.85 - 95.15 - 95.35 - 95.65 - 95.85 - 96.15 - 96.35 - 96.65 - 96.85 - 97.15 - 97.35 - 97.65 - 97.85 - 98.15 - 98.35 - 98.65 - 98.85 - 99.15 - 99.35 - 99.65 - 99.85 - 99.95 -100.1
SALADY	LTRR2-7016	B: 5.35 - 1.45 - 1.85 -2.15 -2.45 -2.75 -2.75 -3.15 -3.45 -3.65 -4.15 -4.35 -4.65 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.85 -4.

9. OSD MANUAL

OSD FUNCTION DESCRIPTION

1. FOCUS ADJUST

: According to the brightness of light to minimize the depth of locus, to be more accurate to focus

1. EXPOSURE

1 Enact cover to set up the function of BRIGHTNESS, SHUTTER, FLICKERLESS, AGO. Set up using LEFT, RIGHT KEY as each menu.

- BRIGHTNESS

: Enable user to control the image brightness (0-15steps).

- SHUTTER

: Ensole user to set up the Shutter Speed.

≈ 1.80(50) , 1/100(120) , 1/250 , 1/500 , 1/1K , 1/2K , 1/4K , 1/8K , 1/10K , 1/50K , 1/100K ^10 is for PAL TYPE

-FLICKERLESS

: Enable user to set up the FICKERLESS ON/OFF.

二、备查文件

- AGC MAX : Enable user to make image bright to amplify the Gain.

0dB-42dB

- INITIAL

: Enable user to initialize the Exposure menu set up.

9. OSD MANUAL

3. WHITE BALANCE

: Enable user to represent the accurate white color by controlling the R,G,B level. Setting up

LEFT, RIGHT KEY on account.

SW MODE

ATW Enable user to trace the White Balance

automatically in the range of 2,900K-10,000K.

(2) PUSH: Linkin user to search for White Business.

1. Emorally, in this mode, color temperature range is interesting ATd

③ PUSH LOCK.

according to the color temperature in the certain

图4.3.10.

- MANUAL : Enable user to set the 'While Balance

according to the circumstances.

RED CONTROL

In the MANUAL setting of VB NODE, start new to set the RED GAIN.

BLUE CONTROL

: In the MANUAL setting of WB MODE, enable user to set the BLUE GAIN.

2014年1月1日

- PUSH AUTO In the FL-TU1-O7K selling of IREI MORE, possible uses in the White Balance in

in the PUSH LOCK SETTING OF THE KROBE, VIKEL OSCH TO TX 600 WHITE BARRISON

- INITIAL

- Enable user to reset the WHITE BALANCE menu setting.

4. BLC

: Use the condition which Image doesn't figure out with BLO such as place surrounded windows

and lobby. Sel the DLC using the LEFT, RIGHT KEY on the each menu.

-ATB MODE

in this mode, the brightness of a single image is

compensated using the gamma curve.

173 LEVEL

- AHI LEVEL - Enable test in set AHI Level 0.4 levels

1. 2020年6月16日（T+4）

BLC/Back Light Compensation

□ CFF: BLO move off

① ON: BLC mode on.

(6) H.D.: High Light Compensation Method

HOTOC BALANCE
HOTOC BALANCE	NO. 1
HOTOC BALANCE	NO. 2
HOTOC BALANCE	NO. 3
HOTOC BALANCE	NO. 4
HOTOC BALANCE	NO. 5
HOTOC BALANCE	NO. 6

*High Light Compensation (HLC) is a function that improves the visual recognition of

license plates and other such objects by suppressing or masking strong light sources is such as

the Headlights of Automobile

BLU
SAPF HOUSE	ON
CORN LIME	4
RED VOLUME	ON
RED ZONE	CENTER
RED LEVEL	5
R.Q.M.
REF. LEVEL

9. OSD MANUAL

- BLC ZONE : Enable once to set the BLC axis - TOP, BOTTOM, CENTER, LEFT, RIGHT.

- BLC LEVEL : Enabre user to set BLC in selected arcall6-15 level.

INITIAL: Enable user to misimize the BLC selling.

5. DAY&NIGHT

Conversion of output image COLOR / BW depending on exterior environment. Enable user to set the LEFT, RIGHT KEY in menu.

TOMATO

- D&N MODE ○ COLOR: Enable user to find the output image in color.

(2) BOW: Crude oil to 10 Lbs crop, l/mage in GBV.

Enable user to convert in ECR 12.0.1967 automatically

- DWELL TIME: Fr DAN MOOE AUTO, encodes user to set to delay time for charging COLOR:FWILL-1660

2016 Survey time for one week 30:05:18, 19:10:30

D-N LEVEL

Day(Color) to NightBW) a Sensor level(0-19).

N-XD LEVEL

Night(BW) to Day(Color) a Sensor Love (1-20).

M-25T

- BURST In BW media. Color burst signal ON/OFF

SALES: 2

- SMART-SR By the IP LED into, the screen is asso-rated, and automatically adjust the brightness.

so you can see the screen.

ONEST LEVEL

- SMART-IN LEVEL : Enable user to control the Level (0, -1 step).

2.2.1.1 10:15

LED CONTROL

☐ MANUAL: IR LED brightness is adjusted manually.

(2) AUTO IR LED Engineers is using a mechanical system.

- LED LEVEL

Enable user to control the IR-LED Level (0-15 steps).

INITIAL

- INITIAL Enable user to navigate ice selling in DAYSNICA or more.

9. OSD MANUAL

1. IMAGE

: MIRROR, DVR, SHARPNESS function set up by pressing LEFT, RIGHT KEY.

- MIRROR: Enable user to reverse the image.

- DNR: This function reduces noise by undertaking spatial filtering for one image

- DNA LEVEL: Enable user to set level(3-15 steps).

- SHARPNESS : Enable user to control the image sharpress (0-15 steps).

- INITIAL : Enable user to initiate the setting on IMAGE menu.

7 SPECIAL

Selling up the CAM TITLE, LANGUAGE, COMM ADJUST, PRIVACY, MOTION DETECT.

9. OSD MANUAL

- CAM TITLE: Enelin 100 to 10000 euro word in screen; Maximare 13 (base is available)

A wife: Griffs from the screen using menukey

② Enclose user to move to next menu using LEFT, RIGHT, KEY IN LOCATION. ③ By using UP, D'AM, LEFT, RE3+T KEY, walk up to throw you, listen it

LOCATION and free gel back to previous elec.

① Enable user to finish words choice and position by using LEFT, RIGHT KEY in RETURN

- LANGUAGE : Enable user to set up an OED language

- English Chinese, Russian, Spanish, German, Dutch Portuguese, Japanese

COMM ADJUST

Enable user to set up CAMERA ID, BAUCRATE.

© CAMID: Encke user to add Camera ID (N=255).

(2) IBADRATE: A communication speed to Communications with external design (2407, 4800, 3650, 19200).

1. 25th Floor (2-3), 400, 1810, 15243;

- Privacy. Privacy is the leading that covers the

some part on screen to prevent private life

(Maximum 4 point covered).

- ZARE: Enable user to serve a power from 5 to 1000. - HASK: Enable user to select a smart output or share platform.

(1) V START: Marks Vertical grant position

① V LND: Mock Vertical and position.

H START: Mark Horizontal start position

HEND. Main Horizontal and vertical,

① DITCH: 50 PARELLA ② TRANSPERENCY: 20%

① MCSALG: Mexico is a key factor.

1. PITTAL: Enable user to initiate selling of

PRIVACY MENU

9. OSD MANUAL

- MOTION DETECT : Motion detection function.

LEVEL: Enable user to setup a motion direct sensitivity (0-3)

- V END: Motion axis Vertical end position.

C: H START : Motion area Horizontal stay position.

© HUNI: Menon Kuen Hen'sia and pach

(1) INITIAL: Enable use to improve the setting of MOTION DETECT.

A. RONDE-EST

- DISPLAY: Enable user to set up a screen morning of CAM ID, CAM TITLE,

MOTION DETECT

Enable user to set up current on Camera ID screen

② CAMTI

Enable user to set up output in limit CAM TITLE

(3) MOTION DETECT: Enable user to set up out part of

② EDITAL: Focus was to initiate of 215BL-5X menu.

(1) 2014. End of the following:

- DEFECT: The white pine detection and compensation function can automatically detect and communicate up to 84 white pools.

comps 6012, do 8-94 (min. p.m.)

COMPENSATION, DETECT COMPENSATION ON-01.

1. DUTCHN: "As pixel detection"

U. FACTORY DEFAULT

: Enable user to reset all of the status as the factory default Selling up using

LEFT, RIGHT KEY

1. EXIT

: Enable user to EXIT the OSD menu Setting up using LEFT, RIGHT KEY

10. Communication Protocol

Pelco "D" Protocol Commands

- Most widely used Commands

BYTEL BYTE2 BYTE3 BYTE4 BYTE5 BYTE6 BYTE7 BYTE8 TITLE OFF COMD DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA DAT10000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

■ MENU: : Polco Keyboard Menu On/OII [85(=0x5F) + Pattern]
■ MENU: V/D Keyboard Menu On/Off [ Set Preset + 86(=0x62) ]
- MENU: Another Menu On/Off [Go To Praset + 95(=0xSF) or 96(=0x60)]

* C=ID: 0x00 - 0xFF

- ChkSum: The Check Sum is the 8 bit (modulo256) sum of the payload bytes.

(BYTE2-BYTE6) in the command.

- TELE - UP KEY

WIDE - DOWN KEY

NEAR - LEFT KEY

FAR - RIGHT KEY

- MENU - MENU KEY

CAUTION

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. In USA and Canada, Use Class 2 Power Supply Only

CONTENTS

1. CAUTIONS
2. IMPORTANT SAFETY INSTRUCTIONS
3. FEATURES
4. COMPONENTS
5. NAME AND FUNCTION
6. INSTALLATION
7. DIMENSIONS
8. SPECIFICATION
9. OSD MANUAL
10. COMMUNICATION PROTOCOL

1. CAUTIONS

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

Interference that may cause undesired operation

Note

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 10 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense."

WARNING

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Caution

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

CAUTION

1. A regulated DC12V 1A power supply is recommended for use with this camera.
   for the best picture and the most stable operation.
   An unregulated power supply can cause damage to the camera.
   When unregulated power supply is applied, product warranty will be out of subject.
2. It is recommended that the camera is used with a monitor that has a CCTV quality
   75 video impedance levels.
   If your monitor is switched to high impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal components.
   Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reflective light, which may
   cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.

1. CAUTIONS

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes purchased this product, or their local government office, for details of where and how they can take them for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. Household users should contact either the retailer where they for disposal.

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance

2. IMPORTANT SAFETY INSTRUCTION

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, sleeves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the car, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a car is used, use caution when moving the car/apperatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply core or plug is damaged. Liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3. FEATURES

• 1/3" 960H SONY EXVIEW HAD CCD III

+High Resolution of 700TV Lines

- OSD Function

• Multi Language

(ENGLISH CHINESE RUSSIAN, SPANISH GERMAN, FRENCH, PORTUGUESE JAPANESE)

-2DNR

• Privacy Zone / Motion Detect

- Smart IR

• DC12V / AC24V Dual Voltage

• ATR/Adaptive Tone-curve Reproduction / Digital WDR)

The function provides gradation compensation to improve the contrast of subjects both

Lay-attentness areas and high latencies areas exist in the same picture

1. COMPONENTS

5. NAME AND FUNCTION

Sunshield Frame Capacitors Thru Bracket 1.113-45mm Photo cell 1 Body

• Service Video connector & OSD Joystick

CONTROL FUNCTION (ON/OPTION) LEFT RIGHT DCALL 500A

B

5. NAME AND FUNCTION

- Heater

Built in heater protects the camera from low temperature. (Operating temperature with Heater, -40 °C)

• External Zoom & Focus Adjustable

9

6. INSTALLATION

- MOUNTING POSITION

90 TUT 360 PAV

90° TLI 300% PA/N

6. INSTALLATION

■ MONITOR CONNECTION

7. DIMENSIONS

Unit mm

15.250 M24609 100 115R M233 M2407 15 15 105 105 0.47 12

15.250 M24609 100 115R M233 M2407 15 15 105 105 0.47 12

1. SPECIFICATION

Signal format: H2C2V
Image Device 127-66H / 50V X Series H2O OCH II
Scanning System 2.1 Inference
Scanning Frequency to /48Hz(H), 10 Hz(H) to 62Hz(H), 5MHz
Total Packs 1000(H) X 1000(V) 1000(H) X 100V
Effective Fluids 9x100X X 40Hz Y 9x100X x100V
Electronic Shutter Speed 1500cc / 100 sec
H Period on 70V TV Linear
20% Rate More than 20% (AOC OFF)
Min Dimension LED On 10 L/s
Type System Internal
Current	≤slant 0.45
Video Output Level	1.0 Vcc - Compact (750)
OBO	Built-in Display
ELO	OFF / ELO / HLC
2018 OFF/OFF/Lo/H lo adjustment
ATR	OFF/OFF/Lo/LO (0.023KB)
SMART IR	On / Off
With a Balance	ATW / PUSH / ANN/ML / PUSH/LOCK
Primary Timing	A Zones
Main Duration	A Zones
Day & Night (CE)	AUDI + Center / I/W
Language	ENGLISH, CHINESE, RUSIAN, SPASSIST, CEFINAS, FRNCH Portugal, JAPANESE
IP Rating	LWD (Lower pods)
IR I/O	100 cm, 4bps
IR I/O Balance	Up to NM
Counting Temperature	14°F - 122°F; 12°C = 90°C / House On; 40°F - 122°F; 40°C = 50°C
Storage Temperature	4°F - 140°F (20°C = 80°C)
Tempoity	Less than 10%
Power Consumption	DC35V (10Pa) Mass (10mA, 1.1kJ) lower Dsg DC35V (10Pa) Max (10W, 21kJ) lower Dsg
Lone	Vertical Lane
Dimensions	66.8Wx (0.8x) (1.1x 120x)
Weight	Approx. 90Hz
Color	RS 48s, Holes

Specifications and designs are subject to change for improving the functionality of this product without notice.

9. OSD MANUAL

GENERAL STRUCTURE

graph TD
    A["输入数据"] --> B["LOGS LABT"]
    B --> C["数据采集"]
    C --> D["数据处理"]
    D --> E["数据输出"]
    E --> F["数据分析"]
    F --> G["数据存储"]
    G --> H["数据归档"]
    H --> I["结束"]

9. OSD MANUAL

graph TD
    A["IMAGE"] --> B["TITLE"]
    A --> C["DATA INPUT"]
    C --> D["DATA Validation"]
    D --> E["Validation"]
    E --> F["OUTPUT"]
    F --> G["RESULT"]
    G --> H["TITLE"]

1. OSD MANUAL

SABY KONK SAB YAKU SAB YAKU
MELIP
POTATO MELIP RUTTER
LVC GROUP	LVC GROUP 20-3
	LVC GROUP 10-15	VOLK, LVC GROUP, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC
	LVC GROUP 20-3	LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, Lvc, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC	LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL
R. TOTAL		LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC, LVC	LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, LPC, Lpc

1. OSD MANUAL

SALADY	LTRR27016	B: 5.5-5.8; C: 5.5-5.9; D: 5.5-6.0; E: 5.5-5.9; F: 5.5-6.0; G: 5.5-6.0; H: 5.5-6.0; I: 5.5-6.0; J: 5.5-6.0; K: 5.5-6.0; L: 5.5-6.0; M: 5.5-6.0; N: 5.5-6.0; O: 5.5-6.0; P: 5.5-6.0; Q: 5.5-6.0; R: 5.5-6.0; S: 5.5-6.0; T: 5.5-6.0; U: 5.5-6.0; V: 5.5-6.0; W: 5.5-6.0; X: 5.5-6.0; Y: 5.5-6.0; Z: 5.5-6.0; AA: 5.5-6.0; AB: 5.5-6.0; AC: 5.5-6.0; AD: 5.5-6.0; AE: 5.5-6.0; AF: 5.5-6.0; AG: 5.5-6.0; AH: 5.5-6.0; AI: 5.5-6.0; AJ: 5.5-6.0; AK: 5.5-6.0; AL: 5.5-6.0; AM: 5.5-6.0; AN: 5.5-6.0; AO: 5.5-6.0; AP: 5.5-6.0; AQ: 5.5-6.0; AR: 5.5-6.0; AS: 5.5-6.0; AT: 5.5-6.0; AU: 5.5-6.0; AV: 5.5-6.0; AW: 5.5-6.0; AX: 5.5-6.0; AY: 5.5-6.0; AZ: 5.5-6.0; BA: 5.5-6.0; BB: 5.5-6.0; BC: 5.5-6.0; BD: 5.5-6.0; BE: 5.5-6.0; BF: 5.5-6.0; BG: 5.5-6.0; BH: 5.5-6.0; BI: 5.5-6.0; BJ: 5.5-6.0; BK: 5.5-6.0; BL: 5.5-6.0; BM: 5.5-6.0; BN: 5.5-6.0; BO: 5.5-6.0; BP: 5.5-6.0; BP: 5.5-6.0; BP: 5.5-6.0; BP: 5.5-6.0; BP: 5.5-6.0; BP: 5.5-6.0; BP: 5.5-6.0; BP: 5.5-6.0; BP: 5.5-6.0; BP : 5.5-6.0; BP : 5.5-6.0; BP : 5.5-6.0; BP : 5.5-6.0; BP : 5.5-6.0; BP : 5.5-6.0; BP : 5.5-6.0; BP : 5.5-6.0; BP : 5.5-6.0; BP :
	DTRR27017	B: 5.5-5.8; C: 5.5-5.9; D: 5.5-6.0; E: 5.5-6.0; F: 5.5-6.0; G: 5.5-6.0; H: 5.5-6.0; I: 5.5-6.0; J: 5.5-6.0; K: 5.5-6.0; L: 5.5-6.0; M: 5.5-6.0; N: 5.5-6.0	B: 5.5-5.8; C: 5.5-5.9; D: 5.5-6.0; E: 5.5-6.0; F: 5.5-6.0; G: 5.5-6.0; H: 5.5-6.0; I: 5.5-6.0; J: 5.5-6.0	B: 5.5-5.8; C: 5.5-5.9; D: 5.5-6.0; E: 5.5-6.0; F: 5.5-6.0; G: 5.5-6.0; H: 5.5-6.0; I: 5.5-6.0; J : 5.5-6.0; K: 5.5-6.0; L: 5.5-6.0; M: 5.5-6.0; N: 5.5-6.0; O: 5.5-6.0; P: 5.5-6.0; Q: 5.5-6.0; R: 5.5-6.0; B: 5.5-6.0; B: 5.5-6.0; B: 5.5-6.0; B: 5.5-6.0; B: 5.5-6.0; B: 5.5-6.0; B: 5.5-6.0; B: 5.5-6.0; B: 5.5-6.0; B : 5.5-6.0; B : 5.5-6.0; B : 5.5-6.0; B : 5.5-6.0; B : 5.5-6.0; B : 5.5-6.0; B : 5.5-6.0; B : 5.5-6.0; B : 5.5-6.0; B :

9. OSD MANUAL

OSD FUNCTION DESCRIPTION

1. FOCUS ADJUST

: According to the brightness of light to minimize the depth of locus, to be more accurate to focus

1. EXPOSURE

1 Enact cover to set up the function of BRIGHTNESS, SHUTTER, FLICKERLESS, AGO. Set up using LEFT, RIGHT KEY at each menu.

- BRIGHTNESS

: Enable user to control the image brightness (0-15steps).

- SHUTTER

: Ensole user to set up the Shutter Speed.

≈ 1.80(50) , 1/100(120) , 1/250 , 1/500 , 1/1K , 1/2K , 1/4K , 1/8K , 1/10K , 1/50K , 1/100K ^10 is for PAL TYPE

-FLICKERLESS

: Enable user to set up the FICKERLESS ON/OFF.

二、备查文件

- AGC MAX : Enable user to make image bright to amplify the Gain.

0dB-42dB

- INITIAL

: Enable user to initialize the Exposure menu set up.

9. OSD MANUAL

3. WHITE BALANCE

: Enable user to represent the accurate white color by controlling the R,G,B level. Setting up

LEFT, RIGHT KEY on account.

SW MODE

ATW Enable user to trace the White Balance

automatically in the range of 2,900K-10,000K.

(2) PUSH: Linkin user to search for White Business.

1. Emorally, in this mode, color temperature range is interesting ATd

③ PUSH LOCK.

according to the color temperature in the certain

图4.3.10.

- MANUAL : Enable user to set the 'While Balance

according to the circumstances.

RED CONTROL

In the MANUAL setting of VB NODE, start new to set the RED GAIN.

BLUE CONTROL

: In the MANUAL setting of WB MODE, enable user to set the BLUE GAIN.

2014年1月1日

- PUSH AUTO In the FL-TU1-OCTK selling of IREI MORE, possible uses in the White Balance in

in the PUSH LOCK SETTING OF THE KROBE, VIKEL OSCH TO TX 600 WHITE BARRISON

- INITIAL

- Enable user to reset the WHITE BALANCE menu setting.

4. BLC

: Use the condition which Image doesn't figure out with BLC such as place surrounded windows

and lobby. Sel the DLC using the LEFT, RIGHT KEY on the each menu.

-ATB MODE

in this mode, the brightness of a single image is

compensated using the gamma curve.

173 LEVEL

- AHI LEVEL - Enable test in set AHI Level 0.4 levels

1. 2020年6月16日（T+4）

BLC/Back Light Compensation

□ CFF: BLO move off

① ON: BLC mode on.

(6) H.D.: High Light Compensation Method

HOTOC BALANCE
HOTOC BALANCE	NO. 1
HOTOC BALANCE	NO. 2
HOTOC BALANCE	NO. 3
HOTOC BALANCE	NO. 4
HOTOC BALANCE	NO. 5
HOTOC BALANCE	NO. 6

*High Light Compensation (HLC) is a function that improves the visual recognition of

license plates and other such objects by suppressing or masking strong light sources is such as

the Headlights of Automobile

BLU
SAPF HOUSE	ON
CORN LIME	4
RED VOLUME	ON
RED ZONE	CENTER
RED LEVEL	5
R.Q.M.
REF. LEVEL

9. OSD MANUAL

- BLC ZONE : Enable once to set the BLC axis - TOP, BOTTOM, CENTER, LEFT, RIGHT.

- BLC LEVEL : Enabre user to set BLC in selected arcall6-15 level.

INITIAL: Enable user to misimize the BLC selling.

5. DAY&NIGHT

Conversion of output image COLOR / BW depending on exterior environment. Enable user to set the LEFT, RIGHT KEY in menu.

TOMATO

- D&N MODE ○ COLOR: Enable user to find the output image in color.

(2) BOW: Crude oil to 10 Lbs crop, l/mage in GBV.

Enable user to convert in ECR 12.0.1967 automatically

- DWELL TIME: Fr DAN MOOE AUTO, encodes user to set to delay time for charging COLOR:FWILL-1660

2016 Survey time for one week 30:05:18, 19:10:30

D-N LEVEL

Day(Color) to NightBW) a Sensor level(0-19).

N-XD LEVEL

Night(BW) to Day(Color) a Sensor level (1-20).

M-25T

- BURST In BW media. Color burst signal ON/OFF

SALES: 2

- SMART-SR By the IP LED into, the screen is asso-rated, and automatically adjust the brightness.

so you can see the screen.

ONEST LEVEL

- SMART-IN LEVEL : Enable user to control the Level (0, -1 step).

1. 深圳市人民政府

LED CONTROL

☐ MANUAL: IR LED brightness is adjusted manually.

(2) AUTO IR LED Engineers is using a mechanical system.

- LED LEVEL

Enable user to control the IR-LED Level (0-15 steps).

INITIAL

- INITIAL Enable user to navigate ice selling in DAYSNICA or more.

9. OSD MANUAL

1. IMAGE

: MIRROR, DVR, SHARPNESS function set up by pressing LEFT, RIGHT KEY.

- MIRROR: Enable user to reverse the image.

- DNR: This function reduces noise by undertaking spatial filtering for one image

- DNA LEVEL: Enable user to set level(3-15 steps).

- SHARPNESS : Enable user to control the image sharpress (0-15 steps).

- INITIAL : Enable user to initiate the setting on IMAGE menu.

7 SPECIAL

Selling up the CAM TITLE, LANGUAGE, COMM ADJUST, PRIVACY, MOTION DETECT.

9. OSD MANUAL

- CAM TITLE : Environ une 10 tonnes euro word in section (Maximum 13 inches is non-diction)

A wife: Grina from the screen using menu by

② Enclose user to move to next menu using LEFT, RIGHT, KEY IN LOCATION. ③ By using UP, D'AM, LEFT, RE3+T KEY, walk up to throw you, listen it

LOCATION and free gel back to previous elec.

① Enable user to finish words choice and position by using LEFT, RIGHT KEY in RETURN

- LANGUAGE : Enable user to set up an OED language

- English Chinese, Russian, Spanish, German, Dutch Portuguese, Japanese

COMM ADJUST

Enable user to set up CAMERA ID, BAUCRATE.

© CAMID: Encke user to add Camera ID (N=255).

(2) IBADRATE: A communication speed to Communications with external design (2407, 4800, 3650, 19200).

1. 25th Floor (2-3), 400, 1810, 15243;

- PRIVACY. Privacy is the leading that covers the

some part on screen to prevent private life

(Maximum 4 point covered).

- ZARE: Enable user to serve a power from 5 to 1000. - HASK: Enable user to select a smart output or share platform.

(1) V START: Marks Vertical grant position

① V LND: Mock Vertical and position.

H START: Mark Horizontal start position

HEND. Main Horizontal and parallel,

① DITCH: 50 PARELLA ② TRANSPERENCY: 20%

① MCSALG: Mexico is a key factor.

1. PITTAL: Enable user to initiate selling of

PRIVACY MENU

9. OSD MANUAL

- MOTION DETECT : Motion detection function.

LEVEL: Enable user to setup a motion direct sensitivity (0-3)

- V END: Motion axis Vertical end position.

C: H START : Motion area Horizontal stay position.

© HUNI: Menon Kuen Hen'sia and pach

(1) INITIAL: Enable use to improve the setting of MOTION DETECT.

AQUISCE'S

- DISPLAY: Enable user to set up a screen morning of CAM ID, CAM TITLE,

MOTION DETECT

Enable user to set up current on Camera ID screen

② CAMTI

Enable user to set up output in limit CAM TITLE

(3) MOTION DETECT: Enable user to set up out part of

ACTION on PROVISION AND ONION TO ELECT ON LINE (1) INITIAL: Enable user to initiate of DISPLAY menu.

- DEFECT: The white pine detection and compensation function can automatically detect and communicate up to 84 white pools.

comps 6012, do 8-94 (min. p.m.)

COMPENSATION, DETECT COMPENSATION ON-01.

1. DUTCHN: "As pixel detection"

U. FACTORY DEFAULT

: Enable user to reset all of the status as the factory default Selling up using

LEFT, RIGHT KEY

1. EXIT

: Enable user to EXIT the OSD menu Setting up using LEFT, RIGHT KEY

10. Communication Protocol

Pelco "D" Protocol Commands

- Most widely used Commands

TITLE OFF CODE SAB TAB TAB TAB TAB TABLE1 OFF CODE SAB TAB TAB TAB TAB TABLE2 OFF CODE SAB TAB TAB TAB TAB TABLE3 OFF CODE SAB TAB TAB TAB TAB TABLE4 OFF CODE SAB TAB TAB TAB TAB TABLE5 OFF CODE SAB TAB TAB TAB TAB TABLE6 OFF CODE SAB TAB TAB TAB TAB

■ MENU: Peke Keyboard Menu On/OII [SS(=0x5F) + Pattern]
■ MENU: V/D Keyboard Menu On/Off [ Set Preset + 86(=0x62) ]
- MENU: Another Menu On/Off [Go To Praset + 95(=0xSF) or 96(=0x60)]

* C=ID: 0x00 - 0xFF

- ChkSum: The Check Sum is the 8 bit (modulo256) sum of the payload bytes.

(BYTE2-BYTE6) in the command.

- TELE - UP KEY

WIDE - DOWN KEY

NEAR = LEFT KEY

FAR = RIGHT KEY

- MENU - MENU KEY