VOP-MT - Unspecified BZBGear - Free user manual and instructions

USER MANUAL VOP-MT BZBGear

HDMI2.0 over IP Multicast Transceiver System with Video Wall support & PoE support

User Manual

Cropped image showing partial Chinese characters on a dark background, likely from a document or form.

TABLE OF CONTENTS

INTRODUCTION 1

FEATURES....1

PACKAGE CONTENTS 2

CONNECTION DIAGRAM 2

SPECIFICATIONS....3

PANEL DESCRIPTIONS....4

IR PASS-THROUGH....6

WARRANTY 7

MISSION STATEMENT....8

INTRODUCTION

The BG-VOP-MT HDMI 2.0 over IP Multicast Transceiver System with Video Wall support & PoE support boosts your audio/video transmission distance up to 120m (396ft) in UHD 4K2K format. With cost-effective ethernet cable users can readily extend UHD sources from DVD players, Blu-ray Disc players, gaming consoles, PCs, and any other HDMI source to any HDMI display. In addition, BG-VOP-MT is HDCP compliant, and supports PoE, IR, and RS-232 pass-through.

By transmitting the A/V signal over the local area network the BG-VOP-MT makes it easy to add a source or display to your system anywhere there is an active ethernet connection. When combined with broadcasting management software and Gigabit Ethernet network switch (supporting IGMP), BG-VOP-MT is a complete UHD video broadcasting solution for digital signage. The transmitting format can be Point to Point, Point to Many, or Multi-Cast. Multi-casting requires a Managed Gigabit Ethernet Switch with 802.1Q VLAN function to allow multiple video sources. To provide more flexibility for installations, BG-VOP-MT can work as either a transmitter or a receiver.

FEATURES

• Supports HDMI input up to 4K2K@60 4:4:4 8bits
• Supports HDMI output up to 4K2K@30 RGB
• Supports High Dynamic Range (HDR)*
• HDMI 2.0a compliant
• HDCP 2.2 compliant
• Supports PoE function
• Can be configured as a transmitter or receiver
• Flexible and scalable UHD Video Broadcasting by Gigabit Ethernet LAN/Switch
• One to one, one to many & multi-casting broadcasting architecture
Each transmitter can be theoretically multicast up to an unlimited number of displays in video wall

PACKAGE CONTENTS

1x BG-VOP-MT
- 1x IR blaster cable
• 1x IR receiver cable
• 1x User Manual

CONNECTION DIAGRAM

graph TD
    subgraph TX
        A["Micro Phone"] --> B["HDAC Cable"]
        C["USB Cable"] --> D["Switching R SPIges"]
        E["PC"] --> F["Switching R SPIges"]
        G["Radio Power"] --> H["HDAC Cable"]
        I["Radio Link"] --> J["HDAC Cable"]
        K["Radio Link"] --> L["HDAC Cable"]
        M["Switching R SPIges"] --> N["Switching R SPIges"]
        O["DC"] --> P["Switching R SPIges"]
        Q["NC"] --> R["Switching R SPIges"]
        S["USB Cable"] --> T["Switching R SPIges"]
        U["RF"] --> V["Switching R SPIges"]
        W["RF"] --> X["Switching R SPIges"]
    end

    subgraph Biguit Ethernet Switch
        Y["Switch"] --> Z["RTM Cable"]
        AA["Switch"] --> AB["RS/CC"]
        AC["Switch"] --> AD["RTM Cable"]
        AE["Switch"] --> AF["RTM Cable"]
        AG["Switch"] --> AH["RTM Cable"]
        AI["Switch"] --> AJ["RTM Cable"]
    end

    subgraph RX
        AK["Power Router"] --> AL["MTM Cable"]
        AM["Power Router"] --> AN["MUSB Cable"]
        AO["Power Router"] --> AP["RTM Cable"]
        AQ["Power Router"] --> AR["MUSB Cable"]
        AS["Power Router"] --> AT["RTM Cable"]
        AU["Power Router"] --> AV["MUSB Cable"]
        AW["Power Router"] --> AX["MUSB Cable"]
    end

    subgraph Smart Controller
        AY["MTM Cable"] --> AZ["Internet LAN"]
        BA["Internet LAN"] --> BB["Micro Device"]
    end

SPECIFICATIONS

Model Name	BG-VOP-MT
Technical	BG-VOP-MT
Role of usage	Transmitter
HDMI compliance	HDMI
HDCP compliance	Yes
Input Video support	Up to 4K2K@60 (4:4:4 8bits)
Output Video support	Up to 4K2K@30 (RGB)
Latency	2 frames (33 ms) maximum
HDMI over UTP transmission [24-bit]	Ultra HD (4K2K60)-120m (396ft) [CAT.X]
Audio support	Surround sound (up to 7.1ch) or stereo digital audio
Input TMDS signal	1.2 Volts [peak-to-peak]
Input DDC signal	5 Volts [peak-to-peak, TTL]
ESD protection	Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
IR pass-thru	Full-duplex bi-directional
RS-232 support	Yes
I/O connector	2x HDMI + 4x 3.5mm + 3x USB + 1x RJ45 + 1x DIN9
HDMI source control	Controllable via IR pass-through from RX to TX and from TX to RX with IR extenders
IR remote control	Electro-optical characteristics: τ = 25° / Carrier frequency: 20-60kHz
HDMI connector	Type A [19-pin female]
Min DIN connector	DIN-9
RJ45 connector	WE/SS 8P8C with 2 LED indicators

PANEL DESCRIPTIONS

Diagram of a network device rear panel with labeled ports and connectors, showing numbered labels from 1 to 17.

1. USB(USB 2.0 downstream port): Connect to USB flash driver or other USB devices (device configure as RX)
2. RS-232: Connect to PC serial port with a DB-9 male-male cable
3. Dip Switch: Video channel selection
4. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
5. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
6. USB: Connect to upstream USB host (device configure as TX)
7. Link LED indicator: I Blink! When unit connect a Cat-5/5e/6 cable

[ ]configures as a receiver

Notes: TX/RX group ID dip-switch setting

1. For ID=1\~63, please refer the table below to set up (Hardware control)
2. For ID=64\~1023, please adjust the DIP switch to ID=0, and the real ID can be decided by the external software (Software control)

ID	Pin1	Pin2	Pin3	Pin4	Pin5	Pin6
0	↑	↑	↑	↑	↑	↑
1	↓	↑	↑	↑	↑	↑
2	↑	↓	↑	↑	↑	↑
3	↓	↓	↑	↑	↑	↑
4	↑	↑	↓	↑	↑	↑
5	↓	↑	↓	↑	↑	↑
6	↑	↓	↓	↑	↑	↑
7	↓	↓	↓	↑	↑	↑
8	↑	↑	↑	↓	↑	↑
9	↓	↑	↑	↓	↑	↑
10	↑	↓	↑	↓	↑	↑
11	↓	↓	↑	↓	↑	↑
12	↑	↑	↓	↓	↑	↑
13	↓	↑	↓	↓	↑	↑
14	↑	↓	↓	↓	↑	↑
15	↓	↓	↓	↓	↑	↑
16	↑	↑	↑	↑	↓	↑
17	↓	↑	↑	↑	↓	↑

ID	Pin1	Pin2	Pin3	Pin4	Pin5	Pin6
32	↑	↑	↑	↑	↑	↓
33	↓	↑	↑	↑	↑	↓
34	↑	↓	↑	↑	↑	↓
35	↓	↓	↑	↑	↑	↓
36	↑	↑	↓	↑	↑	↓
37	↓	↑	↓	↑	↑	↓
38	↑	↓	↓	↑	↑	↓
39	↓	↓	↓	↑	↑	↓
40	↑	↑	↑	↓	↑	↓
41	↓	↑	↑	↓	↑	↓
42	↑	↓	↑	↓	↑	↓
43	↓	↓	↑	↓	↑	↓
44	↑	↑	↓	↓	↑	↓
45	↓	↑	↓	↓	↑	↓
46	↑	↓	↓	↓	↑	↓
47	↓	↓	↓	↓	↑	↓
48	↑	↑	↑	↑	↓	↓
49	↓	↑	↑	↑	↓	↓

IR PASS-THROUGH

[IR Extenders]

IR Blaster

IR Receiver

Coiled black cable with a red circle highlighting a connector (no text or symbols visible)

Close-up of a black audio cable with a separate connector, no visible text or symbols

[IR Sockets]

IR BLASTER: plug in the IR blaster to emit all IR command signals received from the IR receiver for device control.

IR RECEIVER: plug in the IR receiver to receive all IR command signals from the remote control of the corresponding devices.

CAUTION!

Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets. Warranty will not cover the damage.

WARRANTY

BZBGEAR wants to assure you peace of mind. We're so confident in the quality of our products that along with the manufacturer's one-year limited warranty, we are offering free second-year warranty coverage upon registration*.

Taking advantage of this program is simple, just follow the steps below:

1. Register your product within 90 days of purchase by visiting BZBGEAR.com/warranty.
2. Complete the registration form. Provide all necessary proof of purchase details, including serial number and a copy of your sales receipt.

For questions, please call 1.888.499.9906 or email [e-mail].

For complete warranty information, please visit BZBGEAR.com/warranty or scan the QR code below.

MISSION STATEMENT

BZBGEAR manifests from the competitive nature of the audiovisual industry to innovate while keeping the customer in mind. AV solutions can cost a pretty penny, and new technology only adds to it. We believe everyone deserves to see, hear, and feel the advancements made in today's AV world without having to break the bank. BZBGEAR is the solution for small to medium-sized applications requiring the latest professional products in AV.

We live in a DIY era where resources are abundant on the internet. With that in mind, our team offers system design consultation and expert tech support seven days a week for the products in our BZBGEAR catalog. You'll notice comparably lower prices with BZBGEAR solutions, but the quality of the products is on par with the top brands in the industry. The unparalleled support from our team is our way of showing we care for every one of our customers. Whether you're an integrator, home theater enthusiast, or a do-it-yourselfer, BZBGEAR offers the solutions to allow you to focus on your project and not your budget.