CE-LT0012-S1 - Computer accessory Siig - Free user manual and instructions

USER MANUAL CE-LT0012-S1 Siig

Simple circular icon with a horizontal line and a curved band, no text or symbols present.

Cordless Rechargeable LED

Folding Light

Quick Reference Guide

White foldable desk lamp with illuminated screen and open lid (no visible text or symbols)

Introduction

SIIG's Cordless Rechargeable LED Folding Light features tri-fold design and rechargeable battery for portability and ease of use. It integrates 18 LEDs with adjustable light output, multi-function clock/alarm/temperature display, battery charge/power status LED and is wall mountable. This portable cordless rechargeable LED light is the prefect solution for your on-the-go or at home lighting needs.

Package Contents

• Cordless Rechargeable LED Folding Light
• Mini USB charging cable
• Wall mount bracket
• Carrying pouch
• Quick reference guide

Layout

Diagram of a device with numbered parts labeled 1 through 8, showing open and closed views.

Figure 1: Layout

1. LED Lights

18 LEDs with output up to 108 Lumens.

Color Temperature: 5500K(Daylight Color)

2. One-Touch Dimmer Switch

Touch the switch to adjust the LED light brightness or tap once to turn the power on or off.

Close-up of a white electronic device with a circular icon containing a key symbol (no readable text or numbers)

Figure 2: One-Touch Dimmer Switch

3. Mounting Holes

To be hooked up with Wall mount bracket when mounting the LED Light to wall.

4. Time/Temperature Display

Displays the time, day, date and temperature. You can also set the alarm here.

Mode 9:30 Time DATE 10/4 DAY 26.7 Temperature

Figure 3

5. Display Settings Buttons

Press the buttons to change the alarm or time/date/day setting.

6. CR2025 Battery Compartment

Powers the Time/Temperature display via CR2025 battery.

7. Mini USB Charging Port

Connect to USB power source to charge the internal rechargeable battery

8. Charging Status LED

The indicator of the charging status

Mini USB charging port Charging status LED

Figure 4

1. When using the LED Light, hold the base stand by one hand, and pull the upper light arm upward by another hand to unfold it.

Pull up or press down the upper light arm hold the base stand

Figure 5

1. Plug the Mini USB tip of included Mini USB charging cable into the LED Light's Mini USB Charging Port, then plug the other end of the Mini USB charging cable into either a USB port of your computer or a USB wall charger.

The Charge Status LED will turn red to indicate the charging process has begun.

External power source USB Mini USB

Figure 6

NOTE: Please use the included Mini USB charging cable to charge the LED Light. Using a different USB cable is not recommended.

1. Wait for the Charging Status LED goes off, the charging process is complete.

NOTE: Please make sure the LED Folding Light is fully charged before use.

1. Before initial use, please remove the CR2025 Battery protection tab to power on the Time and Temperature Display.

Pull out the protection tab before initial use

Close-up of a hand using a handheld device to press or install a white surface, with no visible text or symbols.

Figure 7

1. For future battery replacement, rotate the battery cover clockwise using a coin or other similar shaped object to remove it. Insert a new CR2025 with the positive side facing up, then reinstall the battery cover by turning it counter clockwise.

CR2025 battery

Close-up of a white electronic device control panel with buttons and a curved arrow indicating rotation (no readable text or symbols)

rotate clockwise to open the cover

Figure 8

1. Pull up or press down the upper light arm to the best angle to fit your needs.

NOTE: There's a sensor on the back of the base stand (See Figure 9a). If the unit is fully folded, the LED lights turn off automatically (See Figure 9b).

sensor

Figure 9a

When fully folded, the LEDs go off automatically

folded, the LEDs matically

Figure 9b

LED Light Adjustment

Use the One-Touch Dimmer Switch to adjust the brightness as needed.

Touch one time To turn on or turn off the LED light

Touch and hold To turn down or turn up the brightness

NOTE: The LED light output will gradually dim during use. Please recharge the LED Light at this time.

Time/Date Settings

Press the Display Settings Buttons on the rear side of the change the Time/Date settings.

MODE SET UP DOWN

MODE	Press the button to switch between "time display mode" or "alarm mode".* In time display mode, it shows TIME on the display; in alarm mode, a clock symbol appears instead.
SET	Press SET button and the section you are going to change will start blinking. To change the settings, press UP/DOWN buttons; to keep it the same, just press SET button again, and you'll proceed editing the next section.When the setup is complete, press the SET button again to save the change.NOTE: The "Day" information will change automatically. No need to adjust it manually.
UP	Press the SET then UP button to set your Time/Date backward.
DOWN	Press the SET then DOWN button to set your Time/Date backward.

Alarm Settings

1. Press the MODE button to change to Alarm mode.
2. Press the SET and UP/DOWN button to set your alarm time, alarm internal in snooze mode, and ring tone in order.

NOTE: Snooze mode is supported by the LED Light; the alarm will ring for 1 minute on regular interval.

1. Press the SET button again to save the settings.

Other Display Settings

1. Press the UP button to select between 12-hour and 24-hour time display.
2. Press the DOWN button to select between Fahrenheit and Celsius temperature display.
3. Press the Alarm button to turn off the alarm.

Application

- WallMount

Peal off the protective cover from the adhesive tape on the back of the Wall mount bracket, then press and hold the Wall mount bracket to the wall for 5-10 seconds. IMPORTANT: The hook opening should face up.

Pure diagram of a 3D object with an arrow indicating upward motion, no text or symbols present

hook opening face up
Figure 10

NOTE: For best adhesion, make sure to clean the wall surface before attaching the bracket to the wall.

Place the LED Folding Light vertically. Make sure the Mini USB Charging Port is facing up.

Line up the two Mounting Holes on the LED Light to the hooks of the Wall mount bracket, then insert it. See Figure 11a.

Pull down the LED Light firmly, but gently, make sure the LED Light is hooked onto the Wall mount bracket. See Figure 11b.

Mini USB Charging Port

Figure 11a
Figure 11b

- Desktop

Unfold and place on the desktop. See Figure 12a.

- Fully folded

Fully fold and carry anywhere. See Figure 12b.

White foldable desk lamp with open lid and digital display (no visible text or symbols)

Figure 12a

Figure 12b

Technical Support and Warranty

QUESTIONS? SIIG's Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond.

SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for two (2) years from the date of purchase of the product.

SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please see our web site for more warranty details.

If you encounter any problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the product to the store where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps below to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, clickSupport, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All accessories that came with the original package must be included.
• Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton.

- You are responsible for the cost of shipping to SIIG. Ship the product to the following address:

SIIG, Inc. 6078 Stewart Avenue Fremont, CA 94538-3152, USA RMA #: ____

- SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio.

SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High quality control standards are evident by the overall ease of installation and compatibility of our products, as well as one of the lowest defective return rates in the industry. SIIG products can be found in computer retail stores, mail order catalogs, through major distributors, system integrators, and VARs in the Americas and the UK, and through e-commerce sites.

PRODUCT NAME

Cordless Rechargeable LED Folding Light

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: [phone]

Cordless Rechargeable LED Folding Light is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.