JU-DK0811-S1 - Computer accessory Siig - Free user manual and instructions

USER MANUAL JU-DK0811-S1 Siig

Red circular logo with a white abstract line design (no text or symbols)

SIIG®

USB 3.1 Type-C Dual 4K Docking Station with Power Delivery

User Reference Guide

Black wireless router device with ports and I/O port labels (no readable text or symbols on the device body)

P/N: JU-DK0811-S1

Introduction

The USB 3.1 Type-C Dual 4K Docking Station adds additional expansion ports to your computer via a single USB 3.1 Type-C cable.

Features and Benefits

- Includes 100W power adapter to provide enough power for connected peripherals. Supports PD charging up to 60W to charge your laptop

- Industry recognized DisplayLink® technology

- Supports single 5K@60Hz Ultra HD video output through dual DisplayPort

- Flexible video interface enables dual 4K@60Hz through HDMI/HDMI, DP/DP, or HDMI/DP with 5.1ch Surround Sound

System Requirements

- Desktop or laptop computer with an available USB 3.1 Type-C port

- Windows ^ 10 (32-/64-bit) / 8 (32-/64-bit) / 7 (32-/64-bit)

• Mac OS X ^® 10.7 or later

Package contents

• USB 3.1 Type-C Dual 4K Docking Station with Power Delivery

- Power Adapter

• USB 3.1 Type-C to Type-C cable

- Driver CD

• User Reference Guide

Layout

1 2 3 4 5 5K * Supports single 5K@60Hz through dual DisplayPort 10 6 7 8 9 1 11 4K 4K Supports dual 4K@60Hz through HDMI/HDMI, HDMI/DP, or DP/DP

Figure 1

1. USB 3.0 port: Connects to USB 3.0 devices
2. USB-C port: Connects to USB-C devices
3. Power LED: Lights up when the power is on
4. Speaker jack: Connects to a speaker or earphone
5. MIC jack: Connects to a microphone
6. Power switch: Turns On/Off the Docking Station
7. Power jack: Connects to the power adapter
8. RJ45 port : Connects to an Ethernet network
9. HDMI: Connects to HDMI displays
10. DisplayPort: Connects to DisplayPort display(s)*
    *Note: In order to support 5K video output, must connect BOTH DisplayPort outputs to a SINGLE 5K DisplayPort TV/Monitor
11. USB-C in: Connects to a USB-C port, use only the supplied USB-C cable

Application

The image below shows the varied peripheral devices supported by the dual video docking station.

Collection of electronic devices including headphones, keyboard, mouse, audio jack, monitor, laptop, and cloud (no visible text or symbols)

Figure 2: Connections

Software Installation

Make sure the proper version driver for your graphics card is installed, the USB 3.1 Type-C Dual 4K Docking Station is not designed to work with Windows' Standard VGA Graphics Adapter driver.

Important: Do not plug the docking station into the computer until instructed to do so.

1. Insert the driver CD. The Auto-play pop-up window will display. If not, browse the CD/DVD manually.

2. Run Setup.exe, and click Yes at the User Account Control window.

3. DisplayLink Graphics window appears, select Install at "system check" stage.

4. At "First connect" stage, connect your second monitor to the Docking and turn it on.

5. Connect the Power Adapter, then plug the power adapter into a power outlet.

6. Plug the Docking Station into an USB 3.1 Type-C port of the computer using the included USB 3.1Type-C cable respectively. When the Docking Station is detected, the Final Setup will run automatically.

7. Once the Final Setup is done, an "Installation complete" message shows, at that time select Finish.
8. Restart the computer and the Docking is ready for use.

To Verify Windows Installation

1. From the desktop, right click This PC, Computer, or My Computer, then click Manage.

For Windows 10 / 8 / 7 / XP: Click Device Manager.

1. Double click Display Adapters.

5K Graphic Docking should be displayed.

Note: If there is a 🔒(yellow question mark) or ⚠ (exclamation mark) next to that item, then the driver is not properly installed. In this case, please delete the item, unplug the Docking and repeat the driver installation steps.

Multi-Monitor Configuration

The add-on monitors can be configured by clicking the utility icon and selecting DisplayLink Manager or Video Setup. The configuration page can also be opened using the steps below.

Position the mouse anywhere on the desktop:

1. For Windows 10: Right click, then select Display settings.
2. For Windows 8 /7: Right click, then select Screen resolution.

Extended Mode

1. Open the configuration page.
2. In the Display drop-down menu, select the preferred monitor.

For Windows 10 / 8 / 7: In the Multiple displays drop-down menu, select Extend desktop to this display.

1. Click APPLY to confirm and close the settings screen.

2. Once the setting is completed, simply drag and drop the application icons or the opened window, in restore down mode, to the add-on display. However, some applications may not support the extended desktop add-on display.

Mirror Mode

1. Open the configuration page.

2. In the Display drop-down menu, select the preferred monitor.
   For Windows 10 / 8 / 7: Check Multiple displays, then select Duplicate these displays.

3. Click APPLY to save your changes.

Windows Shortcut

Press Windows key and P to bring up the menu and choose a desired mode

Computer only Duplicate Extend Projector only

Figure 3: Windows Shortcut

Cursor Disappearing

In some cases, when removing the Docking while in extended mode, the desktop will still be paired to the add-on monitor(s) and the mouse cursor may not return to the primary monitor. If this happens, connect the add-on monitor(s) and Docking again or keep moving the mouse.

Video Playback in Extended Mode

If the video or DVD playback quality is poor or skips frames in the extended mode, please playback on the primary monitor instead of the add-on monitors.

Uninstall the Driver

Windows 10 (32-/64-bit) / 8 & 7 (32-/64-bit)

1. Open Control Panel> Programs> Programs and Features.
2. Click DisplayLink Graphics Driver, click Uninstall, then click Yes.
3. At User Account Control, click Yes, and click OK.
4. Click Yes to restart the computer.

Mac OS Driver Installation

1. Connect your second monitor to the USB 3.1 Type-C Docking Station and turn it on, then plug the Docking Station into the computer.
2. Insert the driver CD, then double click Driver CD icon on the Desktop.
3. Choose the Mac folder according to your OS.
4. Double click DisplayLink_OSX_....dmg
5. At the DisplayLink Installer, double click DisplayLink Software Installer.pkg.
6. At the Introduction, click Continue one to two times as needed.
7. At the License, click Continue, and Agree.
8. At the Destination Select screen, click Continue. Skip this step if not prompted.
9. At the Installation Type screen, click Change Install Location if you want to change the default folder; otherwise, click Install, then click Continue Installation.
10. Type in Name and Password, click OK or Install Software, then click Continue Installation.
11. Click Restart to complete the installation.

To Verify Driver Installation

1. Click the Apple logo from the top menu bar.
2. Click About this Mac, More Info..., System Report.
3. Under Software/Extensions, both DisplayLink Driver and DisplayLinkEthernetDriver will be displayed.

Mac Display Utility

Click the utility icon in the taskbar to change the modes or resolutions, or double click System Preference, click the Display icon, then select the Arrangement pane.

Setting the Display Resolutions

Select an available resolution from the Display Preferences window. The resolutions available depend on both the Docking Station and the capabilities of the connected display.

EV3237 Search Display Arrangement Color Resolution: Best for display Scaled Here's Larger Text More Space Resolution list Using a scaled resolution may affect performance. Rotation: Standard Rotate drop down list AirPlay Display: No Devices Detected Show mirroring options in the menu bar when available Gather Windows

Figure 4

Rotating a Display

Configure the orientation using the Rotate drop down box, see Figure 4. Select the appropriate angle of rotation to match your display's set up.

Setting the Display to Mirror/Extend Mode

Check Mirror Displays box on the Arrangement pane to enable mirror mode. Uncheck the box to set the display to extend mode. See Figure 5.

Change the main display by simply dragging the white menu bar between the displays.

Built-in Retina Display Search Display Arrangement Color To rearrange the displays, drag them to the desired position. To relocate the menu bar, drag it to a different display. Mirror displays Mirror Displays AirPlay Display: Off Show mirroring options in the menu bar when available Gather Windows ?

Figure 5

Changing the Main Display

You can change the main display by moving the Menu Bar between the displays. Changing the main display affects where new windows appear and the position of the Docking Station see Figure 5.

Technical Support and Warranty

QUESTIONS? SIIG's Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst will promptly respond.

SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for two (2) years from the date of purchase of the product. This warranty is not transferable and is available only to the original purchaser of the product.

SIIG will, at our discretion, repair or replace (with an identical product or product having similar features and functionality) the product if defective in materials or workmanship. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Please see our web site for more warranty details.

If you encounter any problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the product to the store where you purchased it.

B) If your purchase has passed the store's return policy period, please follow these steps to have the product repaired or replaced.

Step 1: Submit your RMA request. Go to www.siig.com, click Support, then Request A Product Replacement to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All software, cable(s) and any other accessories that came with the original package must be included

- Include a copy of your original sales receipt inside the package with date of purchase and place of purchase circled and clearly visible

- Clearly write your RMA number on the top of the returned package. SIIG will refuse to accept any shipping package, and will not be responsible for a product returned without an RMA number posted on the outside of the shipping carton

- You are responsible for the cost of shipping to SIIG. Ship the product to the following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

- SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio. All centered around the distribution and switching of A/V signals over CAT5/6, these products include matrix switches, distribution amplifiers, extenders, converters, splitters, cabling, and more.

SIIG is the premier one-stop source of upgrades and is committed to providing high quality products while keeping economical and competitive prices. High-quality control standards are evident by one of the lowest defective return rates in the industry. Our products offer comprehensive user manuals, user-friendly features, and are backed by an extensive manufacturer warranty.

SIIG products can be found in many computer retail stores, mail order catalogs, and e-commerce sites in the Americas, as well as through major distributors, system integrators, VARs and e-commerce sites.

PRODUCT NAME

USB 3.1 Type-C Dual 4K Docking Station with Power Delivery

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS E OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: [phone]

USB 3.1 Type-C Dual 4K Docking Station with Power Delivery is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective owners.

March, 2018

Copyright © 2018 by SIIG, Inc. All rights reserved.