PU-305BD-RX - Émetteur AV CYP - Free user manual and instructions

Product Type	AV Transmitter (HDMI over HDBaseT)
Model	PU-305BD-RX
Brand	CYP
Dimensions (W x D x H)	Approx. 200 x 150 x 30 mm
Weight	Approx. 0.5 kg
Power Supply	DC 5V/1A via included adapter
Power Consumption	< 5W
Video Input	1x HDMI (Type A female)
Video Output	1x RJ45 (HDBaseT) for transmission
Maximum Transmission Distance	Up to 70m over Cat6 at 1080p
Supported Resolutions	1080p, 720p, 480p, and 3D
Audio Support	Stereo audio via HDMI
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 60°C
Humidity	20% to 90% (non-condensing)
Main Functions	Transmit HDMI signal over single Cat6 cable; supports IR pass-through; EDID management; plug-and-play
Care and Cleaning	Wipe with dry cloth; avoid liquids; disconnect power before cleaning
Safety Precautions	Use only provided power adapter; do not expose to moisture; keep away from heat sources
Spare Parts and Repairability	No user-serviceable parts; contact authorized service center for repairs; power adapter available as spare
General Information	Designed for professional AV installations; compatible with standard HDBaseT receivers

Frequently Asked Questions - PU-305BD-RX CYP

What is the maximum transmission distance of the PU-305BD-RX?

The PU-305BD-RX can transmit HDMI signals up to 70 meters over a single Cat6 cable at 1080p resolution.

Does the transmitter support 4K resolution?

No, the PU-305BD-RX supports up to 1080p (Full HD) and 3D, but not 4K.

Can I use a Cat5e cable instead of Cat6?

Yes, but the maximum distance will be reduced. For best performance, use Cat6 or higher.

Does it support IR remote control pass-through?

Yes, the transmitter includes an IR input for extending IR signals to the receiver side.

What power supply does the PU-305BD-RX require?

It requires a DC 5V/1A power adapter, which is included in the package.

Can I connect the transmitter directly to a display?

No, the transmitter outputs over HDBaseT (RJ45). You need a compatible receiver to convert back to HDMI.

Is the device plug-and-play?

Yes, the PU-305BD-RX is plug-and-play with no additional software or drivers required.

How do I clean the transmitter?

Disconnect power and wipe the enclosure with a soft, dry cloth. Avoid using liquids or abrasive cleaners.

What should I do if the device overheats?

Ensure proper ventilation. If overheating persists, disconnect power and contact customer support.

Are spare parts available for this transmitter?

Only the power adapter is available as a spare part. Internal components are not user-serviceable; contact authorized service for repairs.

USER MANUAL PU-305BD-RX CYP

AUDIO - CAT DC 12V POWER Receiver

PU-305BD-RX

Bi-Directional Digital Audio over Single CAT Receiver

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document. CYP (UK) Ltd also makes no commitment to update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document and/or product at any time and without notice.

COPYRIGHT NOTICE

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means—electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from CYP (UK) Ltd.

© Copyright 2011 by CYP (UK) Ltd.

All Rights Reserved.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 29/03/2018 First release

CONTENTS

1. Introduction......6
2. Applications ......6
3. Package Contents ......6
4. System Requirements ......6
5. Features......6
6. Operation Controls and Functions .....7
   6.1 Front Panel....7
   6.2 Rear Panel....8
   6.3 RS-232 Pin Definition 8
7. Connection Diagram ......9
8. Specifications....10
9. Acronyms......11

1. INTRODUCTION

The Optical (S/PDIF) IN/OUT with RS-232 Receiver can send or receive S/PDIF audio signal synchronously over a single run of CAT5e/6 cable up to 300m. With RS-232 control and PoE feature added this Receiver can pair with Transmitter unit together that support device control and one side power supply.

2. APPLICATIONS

Home sound system extension
Conference and meeting room audio system sharing
Showroom audio extension
Airport announcement system
■ Public sound system installation

3. PACKAGE CONTENTS

Optical IN/OUT and RS-232 Receiver
12V Power Adaptor
Operation Manual

4. SYSTEM REQUIREMENTS

Input Transmitter with source equipment such as Blu-ray/DVD player and output to active speakers or sound systems. Connect RS-232 to control device for RS-232 command receiving.

5. FEATURES

Supports S/PDIF IN/OUT and RS-232 control
Supports Optical S/PDIF audio sampling rate up to 192 kHz
The S/PDIF with 192kHz sampling rate over a single CAT5e/6/7 cable up to 100m/328ft, 96kHz sampling rate the cable up to 150m/492ft and 48kHz sampling rate the cable up to 300m/984ft
Supports LPCM 2CH, Dolby Digital 2\~5.1CH, DTS 2\~5.1CH (Pass through)
■ Support Bi-direction Power over Cable (PoC)
Bi-directional RS-232 control

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

OPTICAL IN OPTICAL OUT RS-232 12

1 OPTICAL IN

Connect to source equipment such as DVD/Blu-ray player, Set-Top Box or game console for audio input signal routing.

2 OPTICAL OUT

Connect to active speakers and or AV amplifiers with optical cable for audio output.

3 RS-232

Connect from PC/Laptop for RS-232 command sending to control the device or with control device.

6.2 Rear Panel

AUDIO - CAT DC 12V POWER ① ● ●

1 AUDIO-CAT

Connect the AUDIO-CAT input to the AUDIO-CAT output of the Transmitter unit using CAT5e/6/7 cable.

2 DC 12V

Connect the adaptor with power cord included in the package and connect to AC wall outlet for power supply.

3 POWER indicator

When power is ON, the LED will illuminate.

6.3 RS-232 Pin Definition

Pin Define TX/RX
1 N/C
2 TxD / RxD
3 RxD / TxD
4 N/C
5 GND
6 N/C
7 N/C
8 N/C
9 N/C

7. CONNECTION DIAGRAM

graph TD
    A["Amplifier"] --> B["DVD/Blu-ray Player"]
    A --> C["PC/NB"]
    B --> D["Optical OUT / Optical IN / OUT / RS-232"]
    C --> E["PC/NB"]
    D --> F["AUDIO CAT / DC 12V / POWER"]
    E --> G["AUDIO CAT / DC 12V / POWER"]
    F --> H["RS-232"]
    G --> I["RS-232"]
    J["DVD/Blu-ray Player"] --> K["Amplifier"]
    L["RS232 Control Device"] --> M["Amplifier"]

8. SPECIFICATIONS

Input Port 1 x Optical

Output Port 1 x Optical

Control Port 1 x RS-232

Audio Sampling Rate Up to 192 kHz

Audio Format LPCM 2CH, Dolby Digital 2\~5.1CH, and DTS

2\~5.1CH (Pass through)

CAT Cable Distance 192k@100m/328ft

96k@150m/492ft

48k@300m/984ft

Input Level/Frequency

Output Level

THD+N

Frequency Response

SNR

Crosstalk

Power Supply 12V / 1.25A DC (US/EU standards, CE/FCC/UL

certified)

ESD Protection Human body model:

± 8kV (air-gap discharge)

± 6kV (contact discharge)

Dimensions (mm) 78.5(W) x 83.5(D) x 30(H) (W/Connector)

78.5(W) x 72(D) x 30(H) (W/O Connector)

Weight (g) N/A

Chassis Material Metal

Silkscreen Colour Black

Operating Temperature 0^ 40^ / 32^ 104^

Storage Temperature -20°C \~ 60°C / -4°F \~ 140°F

Relative Humidity 20 \~ 90% RH (non-condensing)

Power Consumption 0.85W

9. ACRONYMS

ACRONYM COMPLETE TERM

Dolby Dolby Laboratories, Inc.,

DTS Digital Theater System

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA

Tel: [phone] | Fax: [phone]

Email: [e-mail]

www.cypeurope.com

v1.00