MCT-1477TXT - Television Marquant - Free user manual and instructions

Product Type	Television
Brand	Marquant
Model	MCT-1477TXT
Display Size	14 inches (measured diagonally)
Display Technology	CRT (Cathode Ray Tube)
Aspect Ratio	4:3
Dimensions (with stand)	Approx. 360 x 380 x 400 mm
Weight	Approx. 8 kg
Power Consumption	60 W (typical)
Power Supply	AC 100-240V, 50/60 Hz
Input Connectors	Antenna (RF), Composite (RCA), SCART (if available)
Audio Output	Built-in speaker (mono or stereo)
Remote Control	Included (infrared)
Teletext	Yes, with TXT function
Channel Coverage	VHF/UHF analog channels
Safety Features	Ventilation slots, do not block; avoid water; unplug during storms
Cleaning	Dust with a dry soft cloth; do not use liquid cleaners
Spare Parts Availability	Remote control, power cord (contact Marquant support)
Repairability	Repairable by qualified technician; no user-serviceable parts inside
Environmental	Dispose in accordance with local electronic waste regulations

Frequently Asked Questions - MCT-1477TXT Marquant

How do I connect an external device like a DVD player?

Use the composite (RCA) input on the back of the TV. Connect the yellow video cable and red/white audio cables. Select the corresponding AV channel using the Source button on the remote.

Why is there no picture but sound is working?

Check if the TV is set to the correct input source. Ensure the antenna cable is securely connected. If using an external device, verify it is powered on. Also adjust brightness and contrast settings.

How do I set up the teletext (TXT) feature?

Press the TXT button on the remote control. Use the numeric keys to enter a page number. Navigate with arrow keys. To exit, press TXT again. Teletext is only available on analog channels.

Can I use this TV with a digital set-top box?

Yes, connect the set-top box to the TV via the composite or SCART input. Set the TV to the corresponding AV channel. Note that the TV itself does not have a digital tuner.

What should I do if the remote control does not work?

Replace the batteries (usually two AA). Point the remote directly at the IR receiver. Check for obstructions. If still not working, try resetting the TV by unplugging it for 1 minute.

How do I clean the TV screen safely?

Turn off the TV and unplug it. Use a soft, dry microfiber cloth to gently wipe the screen. Do not use any chemical cleaners or spray liquids directly onto the screen.

The TV turns off by itself after a few minutes. Why?

This may be due to the sleep timer being enabled. Press the Sleep button on the remote to disable it. Also ensure the TV is not overheating—check ventilation slots are clear.

Is the TV compatible with a universal remote?

Yes, many universal remotes have codes for Marquant TVs. Common codes are 001, 002, or 003. Refer to the universal remote manual for programming instructions.

How can I improve the picture quality?

Adjust the brightness, contrast, and color settings via the Menu button. Ensure the antenna signal is strong—try repositioning the antenna. Reduce interference from other electronics.

Where can I get a replacement power cord?

Contact Marquant customer support or authorized service centers. Use only an approved power cord with the correct voltage rating. Do not use a damaged cord.

USER MANUAL MCT-1477TXT Marquant

Front view of a vintage CRT television with blank screen and speaker grille (no visible text or symbols)

PAS OP

GEVAAR VAN ELEKTRISCHE SCHOKKEN NIET OPENEN

WAARSCHUWING: OM HET GEVAAR VAN ELEKTRISCHE SCHOKKEN ZO VEEL MOGELIJK TE BEPERKEN, RADEN WIJ AAN DE BEHUIZING (OF DE ACHTERZIJDE) VAN HET APPARAATNIET TE OPENEN.

IN HET APPARAAT BEVINDEN ZICH GEEN ONDERDELEN DIE DOOR DE GEBRUIKER KUNNEN WORDEN ONDERHOUDEN OF GEREPAREERD. ONDERHOUD EN REPARATIE DIENEN DOOR DAARVOOR GEKWALIFICEERD PERSONEEL TE WORDEN UITGEVOERD.

LASERPRODUCT KLASSE 1

REAR VIEW Antenna SOCKET Adaptor(not supplied) Plug(not supplied) COAXIAL CABLE(75Ω) TWIN-LEAD FEEDER(300Ω) The signal comes from ● An outdoor antenna ● An indoor antenna Loosen the screw Insert the feeder in Tighten the screw

General Audio Video Performance
-- General Setup Page --
TV Display	LB
TV Type	PAL
Angle Mark	ON
OISD Lang	ENG	English
Captions	OFF	French
Screen Sever	ON	German
Sat OISD Language		Spanish

1. Captions

Region coding: All DVD discs are coded by the sales territory. Please note the player is factoryset to region 2 coding (UK and Europe) and cannot be changed. Therefore discs purchased outside of UK or Europe cannot be played. This is in compliance with the DVD patent requirements.