NRC-191 - Alarm clock radio Naxa - Free user manual and instructions
Find the device manual for free NRC-191 Naxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Alarm Clock Radio |
| Brand | Naxa |
| Model | NRC-191 |
| Dimensions (Approx.) | 5.5 x 3.2 x 2.0 inches |
| Weight (Approx.) | 0.5 lbs |
| Power Source | AC adapter (included) or 2 AAA batteries (for backup) |
| Display Type | LED digital display with adjustable brightness |
| Radio Band | FM (87.5 - 108 MHz) |
| Alarm Modes | Radio alarm or buzzer alarm |
| Snooze Function | Yes (9-minute snooze interval) |
| Sleep Timer | Yes (set to turn off radio after 60, 90, or 120 minutes) |
| Clock Backup | Battery backup retains time and alarms during power outage |
| Volume Control | Rotary knob for radio volume |
| Speaker | Built-in mono speaker, 2.5 inch |
| Antenna | Built-in FM antenna (wire) |
| Material | ABS plastic body |
| Color | Black or white (depending on model) |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquid or abrasive cleaners. |
| Safety Warnings | Keep away from water and moisture. Do not open device. Use only supplied adapter. |
| Spare Parts & Repairability | No user-serviceable parts inside. Contact Naxa support for repairs. |
| Included in Box | Alarm clock radio, AC adapter, user manual |
Frequently Asked Questions - NRC-191 Naxa
How do I set the alarm time?
Press the Alarm Set button. Use the Hour and Minute buttons to adjust the time. Press Alarm Set again to confirm. Ensure the alarm indicator (bell icon) is shown on the display.
How do I switch between radio alarm and buzzer alarm?
Repeatedly press the Alarm Mode button to cycle through options: Radio, Buzzer, or Off. The display will show the selected mode.
How do I set the snooze function?
When the alarm sounds, press the Snooze button (usually marked with a Z or bell icon). The alarm will stop and sound again after 9 minutes. You can repeat snooze multiple times.
Can I use batteries only without the AC adapter?
No, batteries only provide backup for clock and alarm settings. The device requires the AC adapter for normal operation, including the radio and alarm sound.
How do I adjust the display brightness?
Press the Dim button to cycle through brightness levels: high, medium, low, and off (if supported). Adjust to your preference.
Why is the radio not picking up stations?
Make sure the FM antenna wire is fully extended and positioned for best reception. Try rotating the device or moving it away from electronics. If indoors, a weak signal may limit stations.
How do I set the sleep timer?
Press the Sleep button repeatedly to choose a duration: 60, 90, or 120 minutes. The radio will play and then turn off automatically. The display shows the remaining time.
What happens during a power outage?
If AAA batteries are installed, the clock and alarm settings are preserved. The display will turn off to save power. When power returns, the clock resumes correct time.
How do I reset the alarm clock to factory settings?
Remove all power sources (unplug AC adapter and take out batteries). Wait 30 seconds, then reinsert batteries and plug in the adapter. Set the time and alarms again.
No sound from the alarm or radio. What should I check?
Ensure the volume is turned up (rotary knob). For alarm, check that the alarm mode is set to either Radio or Buzzer and the alarm indicator is lit. For radio, ensure you’ve tuned to a station and the antenna is extended.
User questions about NRC-191 Naxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Alarm clock radio in PDF format for free! Find your manual NRC-191 - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NRC-191 by Naxa.