Party EQ07 - Loudspeaker Infiniton - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Infiniton
Model	Party EQ07
Dimensions (L x W x H)	300 x 200 x 200 mm
Weight	2.5 kg
Power Supply	Built-in rechargeable battery (USB-C charging)
Power Output	20W RMS
Bluetooth Version	Bluetooth 5.0
Functions	Bluetooth, USB playback, AUX input, FM radio, microphone input, RGB lights
Connectivity	Bluetooth, USB, AUX, FM
Battery Life	Up to 6 hours
Charging Time	Approximately 3 hours
Maintenance	Wipe with a dry cloth
Cleaning	Do not use abrasive cleaners or solvents
Safety	Keep away from water; do not expose to extreme temperatures
Spare Parts	Not user-serviceable; contact manufacturer for support
Reparability	No user-replaceable parts; refer to qualified service
General Information	Party speaker with dynamic light effects; suitable for indoor and outdoor use

Frequently Asked Questions - Party EQ07 Infiniton

How do I connect my phone via Bluetooth to the Infiniton Party EQ07?

Turn on the speaker by pressing the power button. Press the Bluetooth button to enter pairing mode (indicator flashes). On your phone, enable Bluetooth and select 'Infiniton Party EQ07' from the list. Once connected, the indicator stops flashing.

How long does the battery last on a full charge?

The battery provides up to 6 hours of playback at moderate volume. Actual battery life depends on volume level and usage of features like lights.

Can I use a microphone with this speaker?

Yes, the speaker has a microphone input (3.5mm jack). Connect a wired microphone; the speaker will automatically output audio from the mic along with music.

How do I play music from a USB drive?

Insert a USB drive with MP3 files into the USB port. The speaker will automatically detect and play music. Use the controls to navigate tracks.

How do I use the FM radio function?

Press the Mode button until you reach FM radio mode. The speaker will scan for stations. You can use the play/pause button to auto-scan. For better reception, connect the included USB cable as an antenna or use a wire.

What should I do if the speaker does not turn on?

Check if the battery is charged by connecting the USB-C cable to a power source. If the battery is low, the speaker may not turn on. Charge for at least 30 minutes and try again. If it still doesn't work, contact support.

Can I clean the speaker with water?

No, do not use water. Clean with a soft, dry cloth. Avoid abrasive cleaners. Keep the speaker away from liquids to prevent damage.

How to reset the speaker to factory settings?

With the speaker on, press and hold the Play/Pause and Volume Up buttons simultaneously for 5 seconds. The speaker will restart and clear all paired devices.

What is the charging time for the battery?

Fully charging the battery takes approximately 3 hours using the provided USB-C cable and a 5V/2A adapter.

Can I use the speaker while it is charging?

Yes, you can use the speaker while it is connected to a power source. However, playback time may vary during charging.

USER MANUAL Party EQ07 Infiniton

Exterior view of a black and white Infiniton audio amplifier with colorful circular vented design (no text or symbols on body)

Party EQ07

ean: 8445639004432

Warning symbol depicting a traffic cone inside a triangle (no text or numbers)

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

Symbol of a trash bin crossed out by two diagonal lines (no text or labels)

Exterior view of a black and white Infiniton audio amplifier with colorful circular vented design (no text or symbols on body)

Party EQ07

ean: 8445639004432

Before using your new Infiniton product, please read this user manual carefully to learn how to safely and efficiently use the features offered by this device.

Index	English
Safety information	12
How to use	15
Cleaning & Maintenance	18

For your safety and to ensure correct use, before installing and using the device for the first time, please read this user manual carefully, including its tips and warnings. To avoid unnecessary errors and accidents, it is important to ensure that all persons using the device are thoroughly familiar with its operation and safety features. Keep these instructions and ensure that they remain with the device if it is moved or sold, so that all those who use it throughout its lifetime are adequately informed about the use and safety of the device.

For the safety of life and property, observe the precautions in these user instructions, as the manufacturer is not liable for damage caused by omission.

• Do not obstruct ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, cookers, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a grounding prong. The wide blade or the third prong is provided for your protection. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
  • To disconnect completely from the power cord, unplug the power plug from the electrical outlet.
• The power plug of the power cord shall remain readily operable.
• Do not expose batteries to excessive heat such as sunshine, fire or the like.
• This appliance should only be used with the power cord and/or charger supplied by the manufacturer.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN THE APPLIANCE.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE ALERTS THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS. IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE INFORMATION ACCOMPANYING THE PRODUCT. INFORMATION ACCOMPANYING THE PRODUCT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Caution: Use of headphones at high volume levels for prolonged periods of time may result in permanent hearing loss. For France, the products have been tested to ensure that they meet the sound pressure level requirement set out in the relevant NF EN 50332 L.5232-1.

Note: To avoid possible hearing damage, do not listen at high volumes for long periods of time.

Environment protection

This appliance does not contain gases that could damage the ozone layer, neither in its refrigerant circuit nor in the insulation materials. The appliance must not be disposed of with municipal waste and rubbish. The insulation foam contains flammable gases. The appliance must be disposed of in accordance with the regulations of the appliance to be obtained from the local authorities. Avoid damaging the cooling unit, especially the heat exchanger. The materials used in this appliance marked with the symbol are recyclable.

Symbol of a trash bin crossed with a diagonal line and a horizontal bar below (no text or labels)

This symbol on the product or on its packaging indicates that this product must not be treated as household waste. Instead, it must be taken to the appropriate collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

For more detailed information about recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product.

Packing materials

Materials with the symbol 📁 are recyclable. Dispose of the packaging in a suitable collection container for recycling.

Disposal of the appliance

1. Disconnect the plug from the socket.

2. Cut the power cord and discard it.

Warning! During use, service and disposal of the appliance, pay attention to this symbol, which is located on the back of the appliance (rear panel or compressor). This symbol will be yellow or orange in colour. It is a fire hazard warning sign. There are flammable materials in the refrigerant and compressor piping. Keep away from the source of fire during use, service and disposal..

RoHS Compliance

This equipment complies with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

For products including batteries

EU Battery Directive 2013/56/EU

On 01/07/2015 a new directive on batteries and accumulators, 2013/56/EU, came into force. The directive is applicable to all types of batteries and accumulators (AA, AAA, button cells, rechargeable

rechargeable packs), including those incorporated in devices, except those for military, medical and power tool applications. The directive sets standards for the collection, treatment, recycling and disposal of batteries and aims to ban certain hazardous substances and improve the environmental performance of batteries and all operators in the supply chain.

Instructions for users on battery take-back, recycling and disposal.

To remove batteries from your equipment or remote control, reverse the procedure described in the owner's manual to insert the batteries. In the case of products with an integrated battery that lasts for the lifetime of the equipment, the user cannot remove the battery. In this case, for recycling or recovery, if the battery needs to be replaced, this procedure must be carried out by authorised service centres. In the European Union and other locations, it is illegal to dispose of any battery with household waste. All batteries must be disposed of in an environmentally safe manner. Contact your local waste management authorities for information on the environmentally safe collection, recycling and disposal of used batteries.

WARNING: Danger of explosion if battery is incorrectly replaced. To reduce the risk of fire or burns, do not disassemble, crush, puncture, short circuit, expose to temperatures above 60^ C or dispose of in fire or water. Replace only with specified batteries. The “separate collection” symbol for all batteries and accumulators is the crossed-out wheeled bin below:

Symbol of a trash bin crossed with a diagonal line, representing no waste or discharge (no text or labels)

Batteries, accumulators and button cells containing more than 0,0005 % mercury, more than 0,002 % cadmium or more than 0,004 % lead must be marked with the chemical symbol of the relevant metal: Hg, Cd or Pb respectively. Please pay attention to the following symbol:

WARNING: DO NOT SWALLOW BATTERIES, CHEMICAL BURN HAZARD [supplied with the remote control]

This product contains a button cell battery. If swallowed, it can cause severe internal burns in as little as two hours and result in death. Keep new and used batteries out of the reach of children. If you think batteries may have been swallowed or inserted into any part of the body, seek immediate medical attention.

EPILEPSY WARNING

Some people may experience epileptic seizures when viewing flashing lights.

Product description

Due to technological innovations, the product description in this manual may not completely match your appliance. More detailed information corresponds to the final product.

Top control panel

1 EQ function (Pop, Rock, Jazz, Classic, Flat)

2 MIC priority

3 Mode: (Line in, USB, TF Card, Bluetooth, FM)

4 Previous song

5 Short press to play/pause in USB/TF/BT, and press once to search all stations and store them automatically in FM mode. Long press to switch on TWS function.

6 Menu: (BASS/Treble/MIC Volume/MIC Echo control)

7 Illumination mode

8 Next song

9 Main volume

Rear panel

1	Microphone input
2	Microphone input
3	Line input
4	TF card input
5	USB input
6	DC 9V input
7	Charging indicator light
8	Power on/off

Remote control

1. Mute

Available to be muted in any mode.

2.Previous song

Short press to play the previous song (in USB/TF/BT/FM mode), long press to fast backward (in USB/TF mode).

1. Mode

Short press to jump to BT/LINE IN/USB/TF/FM mode.

1. Recording function

In USB/TF mode, press the "REC" button to record.

1. Echo

Microphone echo decrease.

1. BASS+/-

Press to increase or decrease the bass.

7.EQ function

Press to select different EQ settings.

1. Microphone volume+/-

Press to increase or decrease the microphone volume.

1. Stand by

2. Pause and playback

Short press to play/pause (In USB/TF/BT), long press to connect TWS, and one press to scan all stations and automatically store in FM mode.

1. Next song

Short press to go to the next song (in USB/TF/BT/FM mode), long press to fast forward (in USB/TF mode).

1. Light mode

Switch and turn on/off the light effect.

1. Repeat function

Press to repeat one song or repeat all songs. In BT/LINE IN mode, this button has no function.

1. Recording playback

In USB/TF mode, press to playback the recording.

1. Delete recording

In USB/TF mode, press to erase the recording.

1. Echo+

Press to increase the Echo in any mode.

1. Microphone priority

When the Microphone is in use, press once to have priority over the music program, press again to disa-ble this function.

1. Treble+/-

Press to increase or decrease the treble in any mode.

1. Main volume

2. Number buttons

In USB/TF mode to choose songs. In FM mode you can choose the received station.

Bluetooth pairing mode:

Press the MODE button on the unit or remote control until Bluetooth is selected.

1. Bring the cell phone within 10 meters;
2. Activate the Bluetooth functions of your cell phone to start searching for the Bluetooth device. 3.
3. Select the corresponding device name (Infiniton EQ07) on your cell phone. The cell phone will be paired to the device.
4. Briefly press the "Pause" button to play or pause the music. Short press the "Previous Song" or "Next Song" key to select the previous or next track.

LINE IN mode:

Press the MODE button on the unit or remote control until LINE is selected. Play music from the device connected to the LINE input.

USB / TF CARD mode:

1. After power on, press MODE button to select "USB or TF card" mode, or insert USB or TF card into this speaker, the unit will play the songs automatically.
2. Short press "Pause" button to pause or play.
3. Short press "Previous song" key to go to the previous song.
4. Briefly press the "Next Song" button to go to the next song.

FM mode:

1. Turn on the device and repeatedly press the MODE button to select the FM function (the frequency is shown on the display).
2. Press the play button to activate the automatic memorization (the tuner searches for available stations and memorizes them automatically). The number of memorized stations depends on the reception in your area.
3. Use the next/previous buttons to listen to the memorized stations.
4. To select a preset station directly, press the corresponding number button on the remote control.

TWS mode:

It is possible to connect two speakers together in TWS mode.

1. Place the two TWS loudspeakers close to each other (the distance should not exceed 10 meters).

2. Switch on the two speakers, both speakers selected in Bluetooth mode,

Press and hold the TWS button of one of the speakers as the master speaker for 5 seconds.

If the TWS button of the master speaker is pressed for 5 seconds, the TWS connection will be established.

1. In TWS mode, press and hold the TWS button for about 5 seconds on either speaker or turn off the speaker to exit TWS mode.

WARNING! Before cleaning, unplug the power plug first; do not connect or disconnect the power plug with wet hands, as there is a risk of electric shock and injury.

injury. Do not spill water directly on the appliance, thus avoiding rust, electricity leakage and accidents.

External cleaning

Clean dust accumulated on the surface of the appliance frequently.

WARNING! Do not use bristle brushes, wire brushes, detergent, soap powder, alkaline detergent, benzene, gasoline, acid, hot water and other corrosive or soluble elements to clean the surface of the Device, plastic decorative parts, etc. to avoid damage.

Disconnect the power plug after using this product.

Be careful of accumulated dust and dirt.

If the sound is distorted, turn down the volume.

Safety checks after servicing

Is the power cord broken or damaged?

Is the plug firmly inserted into the socket?

Is the power outlet abnormally overheated?

Note:

Electric shock and fire may occur if the power cord and plug are damaged or stained.

plug are damaged or stained with dust. If there is any abnormality, unplug the power cord and contact your dealer.

INFINITON

SPEAKER

Exterior view of a black INFINITON audio amplifier with colorful circular vent and control buttons (no text or symbols on body)

Party EQ07 ean: 8445639004432

Symbol of a trash bin crossed with two crossed lines and a horizontal bar below (no text or labels)

Symbol of a trash bin crossed with a diagonal line, representing no waste or discharge (no text or labels)

¿Necesitas ayuda?

Silhouette of a person wearing a headset with a wrench icon (no text or symbols)

INFINITON

TÉRMINOS Y REGISTRO DE GARANTÍA