NVR-9509 FH - Heating NEVIR - Free user manual and instructions

Product Type	Fan Heater
Brand	Nevir
Model	NVR-9509 FH
Power Settings	2 heat settings (1000W / 2000W) + fan only
Heating Element	Ceramic PTC
Thermostat	Adjustable thermostat with auto shut-off
Safety Features	Overheat protection, tip-over switch, cool-touch housing
Dimensions (W x D x H)	Approx. 22 x 15 x 28 cm
Weight	Approx. 1.8 kg
Power Supply	220-240 V ~ 50/60 Hz
Power Cord Length	1.5 m
Noise Level	≤ 45 dB
Oscillation	Yes, 70° oscillation
Remote Control	Yes, included
Timer	12-hour timer
Display	LED digital display
Heating Area	Up to 25 m²
Maintenance	Clean air inlet/outlet with soft brush; no lubrication required
Spare Parts	Contact Nevir service for replacement parts (fan, thermostat, etc.)
Repairability Index	7.5 / 10 (based on available parts and design)

Frequently Asked Questions - NVR-9509 FH NEVIR

How do I clean the Nevir NVR-9509 FH heater?

Unplug the heater and let it cool. Use a soft brush or vacuum cleaner with brush attachment to clean the air inlet and outlet grilles. Do not use water or solvents.

What should I do if the heater does not turn on?

Check that the power cord is plugged into a working outlet. Ensure the thermostat is set above room temperature. If it still doesn't turn on, check the overheat protection reset button (if present) or contact support.

Can I use the heater in a bathroom?

No, this heater is not designed for use in bathrooms or humid areas. It is for indoor use only in dry locations.

What is the maximum power consumption?

The maximum power consumption is 2000W on the high heat setting. The low setting uses 1000W, and the fan-only mode uses about 30W.

How do I set the timer?

Press the timer button on the heater or remote control. Use the +/- buttons to set the desired hours (1-12). The timer will automatically turn off the heater after the set time.

Is the heater safe to leave unattended?

It is not recommended to leave any heater unattended for long periods. However, this model includes overheat protection and a tip-over switch that automatically shuts off the heater if it falls over or overheats.

How loud is the heater?

The noise level is approximately 45 dB, which is similar to a quiet conversation. It may vary slightly depending on the fan speed.

Can I use an extension cord?

It is recommended to plug the heater directly into a wall outlet. If you must use an extension cord, use a heavy-duty cord rated for at least 15 amps with a grounding plug.

How do I reset the overheat protection?

Unplug the heater, wait for it to cool down completely (about 30 minutes). Locate the reset button on the back or bottom of the unit and press it with a pen. Plug it back in and test.

What does the 'FH' stand for in the model name?

'FH' likely stands for 'Fan Heater', indicating the type of heating technology used.

USER MANUAL NVR-9509 FH NEVIR

White Nevir heat exchanger with ventilation grille and control knobs (no visible text or symbols on device body)

1. Read and save this instruction manual for further reading.

2. Remove the packing and make sure that the appliance is intact. The appliance must
   Be intact without visible damages which could be caused by transport. In case of doubt do not use it and contact our After-Sales service. Do not leave packaging materials like plastic bags, foam polystyrene, buttons and staples within reach of children.

3. Before connecting the appliance check if the electrical voltage and frequency of the circuit correspond to those indicated on the appliance.

4. In case there is incompatibility between the plug and the outlet, let the outlet replaced with another suitable one by a skilled electrician. He must be sure that the wire section of the outlet is fit to the appliance absorbed power. In general you are suggested not to use adapters, multiple outlets and/or extension cords.

In case they must be used, only simple or multiple adapters and extension cords complying with the current safety rules in force must be used, paying attention that the capacity limit referring to the current value is not exceeded which is marked on the simple adapter or on the extension cords as well as the one of the max capacity, which is marked on the multiple adapter.

1. Use the appliance only for the mentioned purpose, namely for heating for domestic use.

Do not use it for any other application as it could get dangerous.

The manufacturer is not responsible for any eventual damages caused by improper or faulty use.

1. The use of every electrical appliance calls for the awareness of some basic rules, such as:

2. Never touch the appliance with wet or damp hands or feet.

3. Never use the appliance with bare feet.
4. Do not use extension cords in rooms with bath or shower unless you adopt particular prudence.

- Never unplug the appliance by pilling the power cord or the appliance and never expose the appliance to atmospheric conditions (rain, sun, etc.)

- Never let the appliance be used by children or unable people without supervision.

1. Before cleaning the appliance or carrying out any maintenance switch off the whole system or disconnect the appliance.
2. If the appliance malfunctions or is out of work switch in tampering it. If any repair is required please contact only the after-sale center approved by the manufacturer and asks for original spare parts. Otherwise safety of the appliance can be compromised.
3. When the appliance is not in use switch it off and unplug it. Make harmless the parts of the appliance which could be handled hazardously by children for playing.
4. Check that the electrical capacity of the plant and the current outlets are adequate to the max power of the appliance indicated on the rating label. In case of double address to a qualified and skilled workmen.
5. To avoid overheating risks you are recommended to unwind completely the extension cord.
6. The appliance must not be unnecessarily plugged in. Switch it off and unplug it when you do not use it.
7. Do not obstruct the ventilation or heating louver.

8. Keep a minimum distance of 50 cm from walls and objects avoiding that the air flow is directed towards them. Avoid that between the appliance and the wall corners there is a distance which is lower than 15 cm.

9. The power cord must not be replaced by the user. In case of damage address to an after sale service manufacturer.

10. Avoid warm contact check that the cord is not in front of warm air outlet grille.
11. Do not use the appliance near bath-tubs, showers, wash-basic or swimming-pools (minimum distance 1 meter).
12. Use the appliance in horizontal position.
13. Keep cleans the exhaust grille.
14. Never install and use the appliance immediately below a fixed outlet.
15. Do not use the appliance near liquids or inflammable matters.

OPERATION

Plug in the appliance .Check that the outlet has at least a 10 AMPERE current carrying capacity.

Select the speed by the turning the knob clockwise.

$$ \begin{array}{l} \bigcirc = \text { OFF }. \ \text { } = \quad \text { COOL } \quad \text { AIR } \ \sim = \text { WARM AIR } (1 0 0 0 \mathrm{W}) \ \approx = \text { HOT AIR (2000W) } \ \end{array} $$

MODELS WITH AMBIENT THERMOSTAT

Turn the thermostat knob clockwise up to the highest position.

Select the speed turning the knob clockwise (see OPERATION)

When the wished temperature is attained turn the thermostat counterclockwise slowly until the appliance is switched off (the pilot lamp is off) The ambient temperature is automatically maintained.

If you turn the thermostat knob clockwise and you reach the highest position your fan heater will continuously work.

SAFETY DEVICE

This appliance is provided with a safety device disconnecting the appliance in case of overheating.

To deactivate the safety device switch off the appliance and unplug it until it gets cold (about 10 minutes). Plug it again and switch it on.

If the appliance is still off plug it and bring it to our after sale service.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

MAINTENANCE

The appliance needs only an external regular cleaning.

After use and before cleaning always switch the appliance off and disconnect it and wait till the item is cool. Clean the grills from dust.

TECHNICAL DATA

Fan heater

Voltage 220-240V\~ 50Hz

Power consumption 2000W

Class of insulation II

Dimensions 220x177x304mm

Weight 1.5kg

Correct Disposal of this product

According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be separately collected and treated. If at any time in future you need to dispose of this product please do NOT dispose of this product with household waste. Please send this product to WEEE collecting points where available.

In order to fulfill ruling UNE EN-60335, we indicate that if the flexible wire is damaged, it can only be substituted by a technical service recognized by NEVIR, S.A., as per special tooling is required