KT202-2 - Washing machine ELEKTRO HELIOS - Free user manual and instructions

Product Type	Washing Machine
Brand	Elektro Helios
Model	KT202-2
Height	85 cm
Width	60 cm
Depth	57 cm
Capacity (Cotton)	3.2 kg
Capacity (Synthetics)	1.6 kg
Drum Volume	42 L
Maximum Spin Speed	1000 rpm
Water Pressure Range	50 - 800 kPa (0.5 - 8 kp/cm²)
Electrical Connection	1-phase 220/230 V
Power Consumption	2200 W
Current Rating	10 A
Unpacking	Remove transit bolts before use (see manual)
Transport Damage	Check for damage immediately upon receipt
Installation	Place on stable, level surface (see manual)
Safety Instructions	Follow all safety precautions in manual
Filter Cleaning	Remove and clean filter regularly (see manual)
Type of Loading	Front-loading (assumed from image)

Frequently Asked Questions - KT202-2 ELEKTRO HELIOS

How do I unpack my Elektro Helios KT202-2 washing machine?

Carefully remove the packaging and locate the transit bolts. They must be unscrewed and removed before operation. Refer to the manual section UPPACKNING, TRANSPORTSKADOR for detailed instructions.

What should I do if my washing machine was damaged during transport?

Inspect the machine immediately for any visible damage. If damage is found, contact the retailer or transport company right away. Keep all packaging materials for inspection. The manual covers TRANSPORTSKADOR (transport damage) procedures.

How important is the installation of the washing machine?

Proper installation is critical for safe and efficient operation. The manual emphasizes UPPSTÄLLNINGEN ÄR VIKTIG (the setup is important). Ensure the machine is on a firm, level surface and all connections are secure.

How do I clean the filter of my washing machine?

To clean the filter, first locate it (usually at the bottom front). Unscrew it by turning counterclockwise (as shown in manual: Skruva loss filtret). Pull it out (Dra ut filtret), rinse under water, and reinstall.

What are the safety precautions I should follow?

Always read the manual section FÖR SÄKERHETS SKULL. Key precautions: Do not overload, use only recommended detergents, keep children away, and disconnect power before maintenance.

What is the maximum load capacity for cotton?

The maximum load for cotton is 3.2 kg. For synthetics, the capacity is 1.6 kg. Overloading may affect wash quality and machine longevity.

What is the spin speed of this machine?

The maximum spin speed is 1000 rpm. This speed helps reduce drying time. The machine may have adjustable spin settings, refer to the manual for details.

What are the water pressure requirements?

The machine requires a water pressure between 50 kPa and 800 kPa (0.5 to 8 kp/cm²). Outside this range may cause issues with filling or drainage.

How do I remove the transit bolts?

Transit bolts are typically located at the back. Use a wrench to unscrew them (as instructed in the manual: Ta ut de tre plastbultarna). Keep the bolts in case of future transport.

What is the drum volume of the washing machine?

The drum volume is 42 liters. This determines how much laundry can fit at once. Always follow capacity guidelines for best results.

USER MANUAL KT202-2 ELEKTRO HELIOS

S_n = n + 1

KT 202-2

Circular diagram with a cartoon character holding a tool, surrounded by floating bubbles and a horizontal line (no text or symbols)

Line drawing of a single washing machine with front panel, side control buttons, and circular vent (no text or symbols)

s

Hand inserting a small black object into a wall, no text or symbols visible

Illustration of a hand inserting a device into a rack with a directional arrow (no text or symbols)

UPPACKNING, TRANSPORTSKADOR

Line drawing of a wire basket filled with rocks (no text or symbols)

Hand holding a square object with an arrow indicating left-hand rule (no text or symbols)

Skruva loss filtret.

Line drawing of a hand pressing down on a mechanical component with an arrow indicating rotation (no text or symbols)

Dra ut filtret.

Line drawing of a hand using a tool to clean or install a component, no text or symbols present

Illustration of a hand washing a faucet with water flowing from a pipe (no text or symbols)

Varning

Line drawing of hands installing or adjusting a metal bracket with arrows indicating movement (no text or symbols)

Illustration of a hand using a tool to adjust or install an electrical panel (no text or symbols visible)

Illustration of a person using a tool to lift stairs, with a curved arrow indicating motion (no text or symbols)

Technical line drawing of a mechanical assembly with mounting holes and a central component (no text or symbols)

Technical line drawing of a mechanical assembly with a tool interacting with a base plate (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Line drawing of a hand using a tool to adjust or install a mechanical component (no text or symbols present)

Ta ut de tre plastbultarna.

Illustration of hands holding a cylindrical object with a black arrow pointing to it (no text or symbols present)

Technical line drawing of a faucet assembly with valve and handle (no text or symbols)

Technical line drawing of a mechanical device with a lever and pump assembly (no text or symbols)

Simple line drawing of a mechanical testing apparatus with no text or symbols

UPPSTÄLLNINGEN ÄR VIKTIG

Illustration of a hand holding a small object with a pointed tip, no text or symbols present

FÖR SÄKERHETS SKULL

Mod......

Prod. No....

Ser. No....

Höjd 85 cm

Bredd 60 cm

Djup 57 cm

Kapacitet 3,2 (syntet 1,6) kg

Trumvolym 42 l

Centrifugvarvtal 1000 varv/min.

Vattentryck 50-800 kPa (0,5-8 kp/cm²)

Elektrisk anslutning 1-fas 220/230 V - 2200 W - 10A