HS 50 - Moped Batavus - Free user manual and instructions
Find the device manual for free HS 50 Batavus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Moped |
| Brand | Batavus |
| Model | HS 50 |
| Engine Displacement | 50 cc |
| Engine Type | 2-stroke or 4-stroke, air-cooled |
| Fuel Type | Gasoline (unleaded) |
| Maximum Speed | 45 km/h (28 mph) |
| Transmission | Automatic or manual (depending on variant) |
| Dimensions (L x W x H) | Approx. 1800 x 650 x 1000 mm |
| Wheelbase | Approx. 1200 mm |
| Weight (dry) | Approx. 80 kg |
| Max Load | Approx. 150 kg |
| Fuel Tank Capacity | Approx. 5 L |
| Brakes | Front and rear drum brakes |
| Ignition System | CDI (Capacitor Discharge Ignition) |
| Starting System | Kick start (with optional electric start) |
| Battery | 12V, 5-7 Ah (if equipped) |
| Maintenance | Regular oil changes, chain lubrication, tire pressure checks, brake adjustment |
| Cleaning | Wash with mild soap and water; avoid high-pressure jets |
| Safety Features | Headlight, tail light, turn signals, reflectors, horn, helmet recommended |
| Spare Parts Availability | Available through authorized Batavus dealers or online |
| Repairability | Serviceable by qualified mechanic; owner can perform basic tasks |
| Manual Format | PDF download (free) from notice-facile.com |
Frequently Asked Questions - HS 50 Batavus
How do I start the Batavus HS 50 moped?
Turn the fuel valve to ON, set the choke if cold, ensure the kill switch is in RUN position, and kick start firmly. If equipped with electric start, press the starter button.
What type of fuel does the HS 50 use?
It uses unleaded gasoline with an octane rating of 90 or higher. Some models may require a fuel-oil mix if 2-stroke; check your manual.
What is the maximum speed of the Batavus HS 50?
The maximum speed is approximately 45 km/h (28 mph) as per European moped regulations.
How often should I change the engine oil?
Change the engine oil every 1,000 km or at least once per season. Use a quality 4-stroke oil (10W-40 or as specified).
What type of battery does the HS 50 use?
If equipped, it uses a 12V, 5-7 Ah lead-acid battery. Keep it charged and replace every 2-3 years.
How do I adjust the chain tension?
Loosen the rear axle nut, turn the adjuster bolts on both sides to achieve about 1-2 cm of slack, then retighten the axle nut. Ensure the wheel is aligned.
What is the tire pressure for the HS 50?
Front tire: approximately 1.8 bar (26 psi). Rear tire: approximately 2.0 bar (29 psi). Check regularly and adjust for load.
How do I clean the moped?
Use mild soap and water with a soft cloth. Avoid high-pressure water jets that may damage bearings. Dry and lubricate chain after washing.
Where can I find spare parts for the Batavus HS 50?
Spare parts are available from authorized Batavus dealers or online marketplaces. Always use OEM or quality compatible parts.
Is the Batavus HS 50 suitable for beginners?
Yes, it is a beginner-friendly moped with easy controls and low maintenance. Always wear a helmet and follow local traffic laws.
User questions about HS 50 Batavus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Moped in PDF format for free! Find your manual HS 50 - Batavus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HS 50 by Batavus.
