FMXOP25203 - Saw STANLEY - Free user manual and instructions
Find the device manual for free FMXOP25203 STANLEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Circular Saw |
| Brand | Stanley |
| Model | FMXOP25203 |
| Blade Diameter | 184 mm (7-1/4 in) |
| Arbor Size | 20 mm (5/8 in) |
| Power Supply | 120 V, 60 Hz, 15 A (corded electric) |
| No-Load Speed | 5000 RPM |
| Depth of Cut at 90° | 65 mm (2-1/2 in) |
| Depth of Cut at 45° | 48 mm (1-7/8 in) |
| Bevel Capacity | 0° to 45° |
| Dimensions (L x W x H) | 340 x 240 x 280 mm |
| Weight | 4.5 kg (10 lbs) |
| Main Features | Blade guard, depth stop, bevel scale, spindle lock, soft grip handle |
| Maintenance | Clean dust vents, inspect carbon brushes, lubricate gears periodically |
| Safety Features | Double insulation, safety trigger, electric brake, anti-kickback clutch |
| Spare Parts & Repairability | Replacement blades, carbon brushes, power cord, foot plate |
| Warranty | 1 year limited warranty |
| Included Accessories | 24-tooth carbide blade, rip fence, blade wrench, dust bag |
Frequently Asked Questions - FMXOP25203 STANLEY
What type of blade does the FMXOP25203 use?
It uses a 184 mm (7-1/4 inch) circular saw blade with a 20 mm (5/8 inch) arbor.
How do I adjust the cutting depth?
Loosen the depth adjustment lever, slide the base plate to the desired depth (max 65 mm at 90°), then tighten the lever securely.
Can I make bevel cuts with this saw?
Yes, the saw can bevel from 0° to 45°. Loosen the bevel adjust knob, set the angle using the scale, and tighten.
Is this saw corded or cordless?
It is a corded electric saw requiring a 120 V outlet. The cord is about 3 m long.
How do I replace the carbon brushes?
Unplug the saw, remove the brush caps on the motor housing, take out worn brushes, insert new ones, and replace caps. Check every 50 hours of use.
What materials can this saw cut?
It cuts wood, plywood, particle board, and with appropriate blades it can cut plastic and light metal.
Why does the blade stop quickly after turning off?
The saw features an electric brake that stops the blade within seconds for safety. This is normal.
How to clean the saw after use?
Blow out dust from the vents with compressed air, wipe the blade and base plate with a dry cloth, and lubricate the adjustment mechanisms.
What should I do if the saw vibrates excessively?
Check if the blade is dull or damaged, ensure it is securely tightened on the arbor, and inspect for debris in the blade guard.
Where can I find replacement parts?
Replacement parts like blades, brushes, and power cords are available at Stanley service centers or online retailers. Use model FMXOP25203.
User questions about FMXOP25203 STANLEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual FMXOP25203 - STANLEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FMXOP25203 by STANLEY.
