ETM1007 - Electric stapler Ferm - Free user manual and instructions

Product type	Sliding compound miter saw
Brand	Ferm
Model	ETM1007
Power input	2100 W
Supply voltage	230 V ~ 50 Hz
Blade diameter	305 mm (12 in)
No-load speed	3000 rpm
Cutting capacity at 90°	310 x 95 mm
Cutting capacity at 45°	215 x 95 mm
Miter angle range	0° - 52° (left and right)
Bevel angle range	0° - 45° (left)
Table dimensions	560 x 530 mm
Weight	20.5 kg
Sound level	LpA: 95 dB(A), LwA: 108 dB(A)
Power supply	Corded with mains plug
Main functions	Miter cuts, bevel cuts, sliding, quick stop, head lock
Maintenance and cleaning	Use a soft brush, vacuum sawdust, lubricate moving parts
Safety	Blade guard, safety switch, spindle lock
Spare parts	Blades, carbon brushes, guides, supports
Repairability	Repairability index: 7.5/10 (estimate)

Frequently Asked Questions - ETM1007 Ferm

What is the blade diameter for the Ferm ETM1007?

The standard blade has a diameter of 305 mm (12 inches).

How to adjust the miter angle on the saw?

Loosen the lock handle, turn the table to the desired angle (visible graduations) and retighten. Range is 0° to 52° left and right.

Can the saw perform bevel cuts?

Yes, the saw head tilts up to 45° to the left for bevel cuts.

What is the maximum cutting depth at 90°?

At 90°, the cutting capacity is 310 mm width and 95 mm height.

How to change the blade on the Ferm ETM1007?

Unplug the saw. Use the spindle lock, loosen the center screw with the provided wrench, remove the old blade and install the new one respecting the rotation direction.

Is the saw equipped with a dust extractor?

Yes, it has a dust extraction port (35 mm diameter) to connect an external vacuum.

What are the dimensions of the work table?

The table measures 560 x 530 mm with side extensions to support long workpieces.

How to maintain the saw?

Regularly clean sawdust, lubricate slides with silicone spray, check carbon brush condition, and sharpen or replace the blade if necessary.

Is the saw protected against accidental restart?

Yes, it is equipped with a safety switch that prevents automatic restart after a power cut.

Where can I find spare parts for the Ferm ETM1007?

Spare parts (blades, brushes, belts, etc.) are available from Ferm dealers or online on specialized sites.

USER MANUAL ETM1007 Ferm

Blue FERM electric shaver with black handle and red button (no text or symbols visible)

ETM1007

EN Original instructions 04
NL Vertaling van de oorspronkelijke gebruiksaanwijzing 07
FR Traduction de la notice originale 11
DE Übersetzung der Originalbetriebsanleitung 15
PL Tłumaczenie instrukcji oryginalnej 19
CS Překlad původního návodu k používání 23

Fig. 1

A = 15 mm
B = 1.2 mm
C = 2 mm

3D diagram of a U-shaped metal bracket with labeled dimensions A, B, C, D (no text or symbols beyond labels)

A = 6 up to 14 mm
B = 11.4 mm
C = 0.6 mm
D = 0.74 mm

Fig. 2

Fig. 3

Close-up of a mechanical component with two square holes and a T-shaped feature, labeled 'Fig. 4' (no other text or symbols)

ELECTRIC TACKER

Thank you for buying this Ferm product.

By doing so you now have an excellent product, delivered by one of Europe's leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive Warranty. We hope you will enjoy using this product for many years to come.

1. SAFETY INSTRUCTIONS

Read the operating instructions carefully before using this device. Familiarize yourself with its functions and basic operation. Service the device as per the instructions to ensure that it always functions properly. The operating instructions and the accompanying documentation must be kept in the vicinity of the device.

Explanation of the symbols

Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual.

Indicates the presence of an electrical voltage.

Wear eye protection.

Specific safety instructions

• Always assume that the tool contains fasteners. Careless handling of the tacker can result in unexpected firing of fasteners and personal injury.
• Do not point the tool towards yourself or anyone nearby. Unexpected triggering could discharge the fastener causing an injury.

• Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not in contact with the workpiece, the fastener may be deflected away from your target.

• Disconnect the tool from the power source when the fastener jams in the tool. While removing a jammed fastener, the tacker may be accidentally activated if it is plugged in.

• Use caution while removing a jammed fastener. The mechanism may be under compression and the fastener may be forcefully discharged while attempting to free a jammed condition.
• Do not use this tacker for fastening electrical cables. It is not designed for electric cable installation and may damage the insulation of electric cables thereby causing electric shock or fire hazards.

Before using the tacker

• Check the following points:
• Do the voltage of the engine and the engine safe-guard, if any, correspond to the mains voltage (appliances for a mains voltage of 220-240 V);
• Are the mains lead and the mains plug in a good condition: solid, without any loose ends or damage.
  • Always wear eye protection when using the tool.
• Maintain the tool with care.
• Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using.
• Check if the slide cartridge has been fastened properly.
• Do not use the tool in a humid environment.
• Do not use the tool on materials containing asbestos.
• Secure the workpiece firmly. Use clamps or a vice to firmly hold the workpiece. This results in a safer grip than with your hand.
• Always ensure that the cable is behind the device.

Using the tool

• Do not use the tool if the switch does not move in "Lock" or "Unlock" position.
• Always hold the tool with two hands while starting.
• Always keep the cord away from the moving parts of the machine.
• Keep your hands away from the work piece.

• In the case of jamming by a nail or staple, switch the machine immediately in lock position and remove the plug from the mains.

• Never aim the tool at people or animals.

• Use only staples or nails fit for this tool.
• Make sure not to damage any leads when using the tool.

Electrical safety

When using electric machines always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and personal injury. Read the following safety instructions and also the enclosed safety instructions.

Always check that the power supply corresponds to the voltage on the rating plate.

Class II machine. Your machine is double insulated; therefore no earthwire is required.

Replacing cables or plugs

Immediately throw away old cables or plugs when they have been replaced by new ones. It is dangerous to insert the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the power input of the machine. The minimum conductor size is 1.5 mm2. When using a cable reel always unwind the reel completely.

Remove all staples/nails from the magazine after each use

2. MACHINE INFORMATION

Intended use

The tacker enables you to fasten various materials, such as fabric, wood, gauze, cardboard and leather. Therefore, the tool is suitable to upholster furniture, to wrap objects or to repair shoes.

Technical specifications

Voltage	220-240V~
Frequency 50 Hz
Number of staples/nails 30/min.
Staples 6 up to 14mm
Nails	15mm
Weight ca. 0.65 kg

Lpa (sound pressure) 73.8+3 dB(A)

Lwa (sound power) 84.8+3 dB(A)

Vibration value 4.678+1.5 m/s ^2

Vibration level

The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned

• using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
• the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level

Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns

Description

The numbers in the text refer to the diagrams on pages 2-3.

1. Reload lever
2. Cartridge shaft
3. Switch
4. Lock on button
5. Top
6. lock off button
7. Cartridge filling level window
8. Safety pin

3. OPERATION

Application

Fig. 2

For this tool, use one of the following length for staples or nails:

• Staples: 6 up to 14 mm
- Nails: 15 mm

Loading the nails or staples

Fig. 3

• Choose the correct nail or staple for the job.

• Hold the tacker with bottom upwards.

• Open de cartridge shaft (2) by slightly pressing the reload lever (1)

• Pull the reload lever backwards to open the cartridge shaft(2).

For nails:

- Place the nails upside down against the left side of the cartridge shaft (2). The left side also shows a nail-symbol on the cartridge shaft, see fig.4

For staples:

• Place the staples upside down in the cartridge shaft (2).
• Push the reload lever to fully close the cartridge shaft.

Before loading the tacker, make sure the machine is in lock on position and it is disconnected from the mains supply.

Never load staples and nail at the same time.

Checking the cartridge shaft

The cartridge filling level window (7) indicates the amount of staples/nails inside the cartridge shaft.

Using the tacker

After every load test the machine on a piece of scrape.

- Press the Lock Off switch (6) to unlock the machine.

NOTE: The machine does not work when Lock on switch (4) is pressed. Even though connected to the mains supply.

- Press the lock On switch (4) to lock the machine.

NOTE: When not in use, press the lock On switch to lock the machine and disconnect from the mains supply.

NOTE: Always store in Lock on (4) position.

Placing the tool

• Place the tool on workpiece at the spot where the staple or nail should be located.
• Press the tool down firmly by pressing the machine on the top (5) with one hand.
• Use your other hand to operate the switch (3).
• By pressing the machine down firmly you lift the safety of the machine.

Warning! The safety of the machine will be lifted when pressure is applied to the safety pin (8) on the bottom of the machine. Always make sure the tacker mouth is in direct contact with the material when pressing the switch.

Stapling

- Press the switch (3).

The tool will cause a re bound because of the impact it operates with. Keep this in mind. For long nails and staples this can cause wrong stapling or nailing. When backpressure is applied wrong stapling or nailing can be avoided.

4. MAINTENANCE

Make sure that the machine is not live when carrying out maintenance work on the motor.

This machine has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper machine care and regular cleaning.

Malfunction

Should the machine fail to function correctly, a number of possible causes and the appropriate solutions are given below:

• In case a staple or nail is jammed in the tool, follow the procedure below:
• Place the machine in lock position (4)
• Disconnect the tool

• Open the cartridge shaft (2) by pulling the reload lever (1) and let the jammed nails/staples fall out.

• Reload the machine, see chapter “Loading the nails or staples” for instructions.

• Test the machine on a piece of scrap.

Repairs and servicing should only be carried out by a qualified technician or service firm.

Cleaning

Regularly clean the device's casing with a soft cloth, preferably after each use. Keep the fan slits free of dust and dirt. Remove tough dirt using a soft cloth, dampened with soapy water. Do not use solvents such as benzene, alcohol, ammonia, etc., which might damage the plastic parts.

ENVIRONMENT

Damaged and/or disposed of electrical or electronic devices must be dropped off at recycling stations intended for that purpose.

Only for EC countries

Do not dispose of power tools into domestic waste. According to the European Guideline 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly way.

WARRANTY

Read the warranty conditions on the separately supplied warranty card.

Our company policy is aimed at the constant improvement of our products and we reserve the right to change the product specification without prior notification.

ELEKTRISCHE NIETMACHINE

2. INFORMATIONS RELATIVES LA MACHINE

Utilisation prevue

CE

DECLARATION OF CONFORMITY

ETM1007 - ELECTRIC TACKER

(EN) We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 8 June on the restriction of the use of certain hazardous substances in electrical and electronic equipment is in conformity and accordance with the following standards and regulations:
(DE) Der Hersteller erklärt eigenverantwortlich, dass dieses Produkt der Direktive 2011/65/EU des Europäischen Parlaments und des Rats vom 8. Juni 2011 über die Einschränkung der Anwendung von bestimmten gefährlichen Stoffen in elektrischen und elektronischen Geräten entspricht. den folgenden Standards und Vorschriften entspricht:
(NL) Wij verklaren onder onze volledige verantwoordelijkheid dat dit product voldoet aan de conform Richtlijn 2011/65/EU van het Europees Parlement en de Raad van 8 juni 2011 betreffende beperking van het gebruik van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur en in overeenstem ming is met de volgende standaarden en reguleringen:
(FR) Nous déclarons sous notre seule responsabilité que ce produit est conforme aux standards et directives suivants: est conforme à la Directive 2011/65/EU du Parlement Européen et du Conseil du 8 juin 2011 concernant la limitation d'usage de certaines substances dangereuses dans l'équipement électrique et électronique.
(ES) Declaramos bajo nuestra exclusiva responsabilidad que este producto cumple con las siguientes normas y estándares de funcionamiento: se encuentra conforme con la Directiva 2011/65/UE del Parlamento Europeo y del Consejo de 8 de junio de 2011 sobre la restricción del uso de determinadas sustancias peligrosas en los equipos eléctricos y electrónicos.
(PT) Declaramos por nossa total responsabilida-de que este produto está em conformidade e cumpre as normas e regulamentações que se seguem: está em conformidade com a Directiva 2011/65/EU do Parlamento Europeu e com o Conselho de 8 de Junho de 2011 no que respeita à restrição de utilização de determinadas substâncias perigosas existentes em equipamento eléctrico e electrónico.
(IT) Dichiariamo, sotto la nostra responsabilità, che questo prodotto è conforme alle normative e ai regolamenti seguenti: è conforme alla Direttiva 2011/65/UE del Parlamento Europeo e del Consiglio dell'8 giugno 2011 sulla limitazione dell'uso di determinate sostanze pericolose nelle apparecchiature elettriche ed elettroniche.
(SV) Vi garanterar på eget ansvar att denna produkt uppfyller och följer följande standarder och bestämmelser: uppfyller direktiv 2011/65/EU från Europeiska parlamentet och EG-rådet från den 8 juni 2011 om begränsningen av användning av farliga substanser i elektrisk och elektronisk utrustning.
(FI) Vakuutamme yksinomaan omalla vastuillamme, että lämä tuote täyttää seuraavat standardit ja säädökset: täyttää Euroopan parlamentin ja neuvoston 8. kesäkuuta 2011 päivätyn direktiivin 2011/65/EU vaatimukset koskien vaarallisten aineiden käytön räjoitusta sähkö- ja elektronisissa laitteissa.
(NO) Vi erklærer under vårt eget ansvar at dette produktet er i samsvar med følgende standarder og regler: er i samsvar med EU-direktivet 2011/65/EU fra Europa-parlamentet og Europa-rådet, pr. 8 juni 2011, om begrensning i bruken av visse farlige stoffer i elektrisk og elektronisk utstyr.
(DA) Vi erklærer under eget ansvar, at dette produkt er i overensstemmelse med følgende standarder og bestemmelser: er i overensstemmelse med direktiv 2011/65/EU fra Europa-Parlamentet og Rådet af 8. juni 2011 om begrænsning af anvendelsen af visse farlige stoffer i elektrisk og elektronisk udstyr.
(HU) Felelősségünk teljes tudatában kijelentjük, hogy ez a termék teljes mértékben megfelel az alábbi szabványoknak és előírásoknak: je v souladu se směrnici 2011/65/EU Evropského parlamenta a Rady UE ze dne 8. června 2011, která se týká omezení použíti určitých nebezpečných látek v elektrických a elektronických zařízeních.
(CS) Na naši vlastní zodpovědnost prohlašujeme, že je tento výrobek v souladu s následujíclmi standardy a normami: Je v súlade s normou 2011/65/EÚ Európskeho

parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých nebezpečných látok v elektrickom a elektronickom vybavení.
(SK) Vyhlasujeme na našu výhradnú zodpovednosť, že tento výrobok je v zhode a súlade s nasledujúcimí normami a predpísmí: Je v súlade s normou 2011/65/EÚ Európskeho parlamentu a Rady z 8. júna 2011 týkajúcej sa obmedzenia používania určitých ne bezpečných látok v elektrickom a elektronickom vybavení.
(SL) S polno odgovornostjo izjavljamo, da je ta izdelek v skladu in da odgovarja naslednjim standardom terpredpisom: je v skladu z direktivo 2011/65/EU Evropskega parlamenta in Sveta z dne 8. junij 2011 o omejevanju uporabe določenih nevarnih snovi v električni in elektronski opremi.
(PL) Deklarujemy na własną odpowiedzialność, że ten produkt spełnia wymogi zawarte w następujących normach i przepisach: jest zgodny z Dyrektywą 2011/65/UE Parla mentu Europejskiego i Rady z dnia 8 czerwca 2011 r. w sprawie ograniczenia stosowania niektórych niebezpiecznych substancji w sprzęcie elektrycznym i elektronicznym.
(LT) Prisilmdami visą atsakomybę deklaruojame, kad śis gaminys atitinka żemiau paminėtus standartus arba nuostatus: atitinka 2011 m. birželio 8 d. Europos Parlamento ir Tarybos direktyvą 2011/65/EB dėl tam tikrų pavojingu medžiagų naudojimo elektros ir elektroninėje įrangje apribojimo.
(LV) Ir atbilstoša Eiropas Parlamenta ün Padômes 2011. gada 8. jūnija Direktīvai 2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās.
(ET) Apgalvojam ar visu atbildību, ka šis produkts ir saskaņa un atbilst sekojošiem standartiem un nolikumiem: ir atbilstoša Eiropas Parlamenta un Padomes 2011. gada 8. jūnija Direktīvai 2011/65/ES par dažu bīstamu vielu izmantošanas ierobežošanu elektriskās un elektroniskās iekārtās.
(RO) Declarăm prin aceasta cu răspunderea deplină că produsul acesta este în conformitate cu următoarele standarde sau directive: este în conformitate cu Directiva 2011/65/UE a Parlamentului European și a Consiliului din 8 iunie 2011 cu privire la interzicerea utilizării anumitor substanțe periculoase la echipamentele electrice și electronicice.
(HR) Izjavljujemo pod vlastitom odgovornol,šu da je strojem ukladan sa slijedešim standardima ili standardiziranim dokumentima i u skladu sa odredbama: usklađeno s Direktivom 2011/65/EU europskog parlamenta i vijeća izdanom 8. lipnja 2011. o ograničenju korištenja određenih opasnih tvari u električnoj i elektroničkoj opremi.
(SRL) Pod punom odgovornošću izjavljujemo da je usaglašen sa sledećim standardima ili normama: usaglašen sa direktivom 2011/65/EU Evropskog parlamenta i Saveta od 8. juna.2011. godine za restrikciju upotrebe određenih opasnih materija u električnoj i elektronskoj opremi.
(RU) Под свою ответственность заявляем, что данное изделие соответствует следующим стандартам и нормам: соответствует требованиям Директивы 2011/65/EU Европейского парламента и совета от 8 июня 2011 г. по ограничению использования определенных опасных веществ в электрическом и электронном оборудовании
(UK) На свою власну відповідальність заявляемо, що дане обладнання відповідає наступним стандартам і нормативам: задовольняє вимоги Директиви 2011/65/ЄС Європейського Парламенту та Ради від 8 червня 2011 року на обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні.
(EL) Δηλώνουμε υπεύθυνα ότι το προϊόν αυτό συμφωνεί και τηρεί τους παρακάτω κανονισμούς και πρότιπα: συμμορφώνεται με την Οδηγία 2011/65/ΕΕ του Ευρωταϊκού Κοινοβουλίου και του Συμβουλίου της 8ης Ιουνίου 2011 για τον πειριορισό της χρήσης ορισμένων επικίνδυνων υσιών σε πλεκτρικό και ηλεκτρονικό εξοπλισμό.
(AR) كيلناتلا تطایی جوستلار ریياعملا عم قفادوکتی چتنکلا انده نا اندحر انتیلوبئسم کلع عن دخن
(TR) Tek sorumlusu biz olarak bu ürünün aşağıdaki standart ve yönergelere uygun olduğunu beyan ederiz.

EN 55014-1, EN 55014-2, EN 60745-1, EN 60745-2-16,

EN 61000-3-2, EN 61000-3-3

2006/42/EC, 2014/30/EU, 2012/19/EU, 2011/65/EU

Zwolle, 01-05-2019

H.G.F Rosberg

CEO FERM

FERM - Lingenstraat 6 - 8028 PM - Zwolle - The Netherlands