GRM1031 - Pressure washer Ferm - Free user manual and instructions
Find the device manual for free GRM1031 Ferm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | High-pressure cleaner |
| Brand | Ferm |
| Model | GRM1031 |
| Power supply | Electric, 230 V / 50 Hz |
| Rated power | 1800 W |
| Maximum pressure | 130 bar |
| Max water flow | 500 L/h |
| Pump type | Piston pump |
| Detergent tank | Integrated |
| Hose length | 10 m |
| Housing material | Robust plastic |
| Weight | 8 kg |
| Dimensions (L × W × H) | 40 × 30 × 30 cm |
| Noise level | 85 dB(A) |
| Main functions | Pressure adjustment, automatic shut-off, spray gun with rotating nozzle |
| Maintenance and cleaning | Clean the inlet filter, drain the hose after use |
| Safety | Thermal protection, automatic shut-off in case of overheating |
| Spare parts and repairability | Spray gun, nozzle, hose, seals |
| Protection level | IPX5 |
Frequently Asked Questions - GRM1031 Ferm
How to start the Ferm GRM1031 high-pressure cleaner?
Make sure the device is plugged into a 230V socket, open the water tap, then press the on/off switch. The device is ready for use.
Can I use detergent with the GRM1031?
Yes, the integrated detergent tank allows the use of suitable cleaning products. Activate low-pressure mode to apply detergent.
What to do if pressure is low?
Check that the inlet filter is not clogged and the hose is not bent. Also make sure the nozzle is set to high pressure.
The device stops suddenly, what should I do?
This may be due to overheating. Let the device cool down for 10 to 15 minutes. If the problem persists, check the thermal protection.
How to clean the GRM1031 filter?
Unscrew the water inlet connection, remove the filter and rinse it with clean water. Reassemble before each use.
What is the maximum pressure?
The maximum pressure is 130 bar, suitable for cleaning cars, terraces, and garden furniture.
Is the hose long enough?
The hose is 10 meters long, allowing you to reach most areas without moving the device.
Can I use the device with a bucket of water?
No, the device requires a pressurized water supply (tap) to function properly.
How to store the hose after use?
Wind the hose without twisting and hang it on the designated holder. Drain residual water before storing.
Where to find spare parts?
Spare parts such as nozzles, seals, and hoses are available from authorized Ferm dealers or online.
User questions about GRM1031 Ferm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual GRM1031 - Ferm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GRM1031 by Ferm.
USER MANUAL GRM1031 Ferm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ferm
Model : GRM1031
Category : Pressure washer