GRM1026 - Pressure washer Ferm - Free user manual and instructions
Find the device manual for free GRM1026 Ferm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Ferm |
| Model | GRM1026 |
| Product type | High-pressure cleaner |
| Power supply | Electric, 230 V ~ 50 Hz |
| Rated power | 1800 W |
| Maximum pressure | 120 bar |
| Water flow | 400 L/h |
| Weight | 8.5 kg |
| Dimensions (L x W x H) | 36 x 28 x 48 cm |
| High-pressure hose length | 6 m |
| Pump type | Axial pump with aluminum pistons |
| Main functions | Car washing, terraces, garden furniture, garden tools |
| Adjustable nozzle | Yes, from fine jet to wide jet |
| Detergent tank | Integrated, 0.5 L |
| Overheat protection | Yes, automatic shut-off in case of overheating |
| Protection rating | IPX5 |
| Sound level | 75 dB(A) |
| Maintenance and cleaning | Clean the water inlet filter regularly; descale the pump if necessary |
| Spare parts available | Yes, at authorized Ferm dealers |
| Warranty | 2 years |
Frequently Asked Questions - GRM1026 Ferm
How to properly connect the high-pressure cleaner?
Plug the cleaner into a 230 V grounded outlet. Make sure the power cord is not damaged and that there is no water near the outlet.
Can I use hot water with the Ferm GRM1026?
No, this model is designed for cold water only. Hot water can damage the pump and void the warranty.
How to use detergent?
Fill the integrated detergent tank with a suitable cleaner (solvent-free). Use low pressure (wide nozzle) to apply the product, let it sit for a few minutes, then rinse at high pressure.
What to do if pressure is low?
Check that the water supply is sufficient (minimum flow 200 L/h), that the inlet filter is not clogged, and that the high-pressure hose is not kinked or punctured.
How to clean the water inlet filter?
Unscrew the water inlet connection, remove the filter and rinse it with clean water. Replace it after drying. Do this regularly to avoid blockages.
Can I leave the cleaner plugged in after use?
No, always unplug the appliance after use. Never leave the appliance unattended while plugged in.
How to store the high-pressure hose?
Completely empty the water from the hose and coil it without kinking. Store it in a dry place protected from frost. Frost can damage the pump.
What to do if the pump leaks?
Check that all connections are tight. If the leak is from the pump itself, contact an authorized service center. Do not disassemble the pump yourself.
How to winterize the high-pressure cleaner?
Unplug and drain all water. Add a special pump antifreeze (non-toxic) to prevent frost damage. Store the appliance in a sheltered place.
Where to find spare parts for the GRM1026?
Spare parts are available at authorized Ferm dealers or on the official website. Have your model number (GRM1026) ready to order.
User questions about GRM1026 Ferm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual GRM1026 - Ferm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GRM1026 by Ferm.
USER MANUAL GRM1026 Ferm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ferm
Model : GRM1026
Category : Pressure washer