BSE18 - Drill Luxor - Free user manual and instructions
Find the device manual for free BSE18 Luxor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Drill |
| Model | BSE18 |
| Brand | Luxor |
| Voltage | 18 V |
| Battery Type | Li-ion |
| Chuck Type | Keyless, 13 mm |
| Speed Settings | Variable speed, 0-600 / 0-2000 RPM |
| Torque Settings | 20+1 torque positions |
| Drilling Capacity (Wood) | Up to 35 mm |
| Drilling Capacity (Metal) | Up to 13 mm |
| Functions | Drilling, screwdriving, hammer drilling |
| LED Work Light | Yes |
| Safety Features | Lock-on button, electric brake, overheat protection |
| Weight | 1.2 kg (with battery) |
| Dimensions (LxWxH) | 200 x 70 x 200 mm |
| Maintenance | Clean with dry cloth, store in dry place |
| Spare Parts Availability | Chuck, carbon brushes, battery available |
| Repair Information | Replaceable carbon brushes, professional service recommended for other repairs |
| Charging Time | Approximately 60-90 minutes |
| Included Accessories | 1 battery, charger, belt clip, double-ended bit |
Frequently Asked Questions - BSE18 Luxor
How long does the battery last on a single charge?
The battery lasts for approximately 40-60 minutes of continuous use, depending on the load and speed setting. For light tasks like screwing, it can last longer.
What is the charging time for the battery?
The standard charger takes about 60-90 minutes to fully charge the 18V Li-ion battery from empty.
Can I use other Luxor 18V batteries with this drill?
Yes, the BSE18 is compatible with all Luxor 18V Li-ion batteries from the same series.
How do I adjust the speed?
The speed is controlled by the trigger pressure. For higher speed, press the trigger harder. There is also a two-speed gearbox: select low speed (0-600 RPM) for high torque and high speed (0-2000 RPM) for drilling.
How do I set the torque?
Rotate the torque adjustment ring to one of the 20+1 positions. Lower numbers for delicate screwdriving, higher numbers for drilling. Position 21 is for hammer drilling.
Can I drill into concrete?
Yes, the BSE18 has a hammer drill function. Select hammer drilling mode (torque position 21) and use a masonry bit. For heavy concrete, a larger SDS drill may be better.
How do I change the direction of rotation?
Use the forward/reverse switch located above the trigger. Push it left for forward (drilling/screwing) and right for reverse (unscrewing). Always allow the chuck to stop completely before switching.
How do I change the drill bit?
Turn the chuck sleeve counterclockwise to open the jaws, insert the bit, then turn clockwise to tighten by hand or with the chuck key if included (but this model is keyless).
What safety precautions should I take?
Wear safety goggles and hearing protection. Ensure the work area is well-lit. Keep hands away from rotating parts. Disconnect the battery when changing accessories or performing maintenance. Also, use the lock-on switch only when necessary.
How should I store the drill?
Store in a dry, cool place away from direct sunlight and extreme temperatures. Remove the battery for long-term storage. Keep in the original case if possible.
User questions about BSE18 Luxor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual BSE18 - Luxor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BSE18 by Luxor.
