GA-03 - Ruler Acme United - Free user manual and instructions

Product Type	Measuring ruler
Brand	Acme United
Model	GA-03
Length	30 cm / 12 inches
Width	30 mm
Thickness	2 mm
Weight	Approx. 50 g
Material	Aluminum with anodized finish
Graduations	Millimeters on one edge, inches on the other
Accuracy	±0.5 mm per meter
Power Source	None (manual tool)
Main Functions	Linear measurement, straight edge drawing, cutting guide
Maintenance	Wipe with a dry cloth; avoid solvents
Cleaning	Mild soap and water; dry thoroughly
Safety	Keep away from children; not a toy
Spare Parts	Not applicable (one-piece design)
Repairability	Not user-serviceable; replace if damaged
General Information	Designed for drafting, school, and office use

Frequently Asked Questions - GA-03 Acme United

What is the length of the GA-03 ruler?

The GA-03 is 30 cm (12 inches) long.

What material is the ruler made of?

It is made of aluminum with an anodized finish for durability.

Does the ruler have both metric and imperial graduations?

Yes, it features millimeters on one edge and inches on the other.

How accurate is the GA-03 ruler?

Accuracy is within ±0.5 mm per meter.

Can I use the ruler as a cutting guide?

Yes, the metal edge can be used as a straight edge for cutting with a knife or rotary cutter.

How should I clean the ruler?

Clean with a mild soap and water solution, then dry thoroughly. Avoid harsh chemicals.

Is the ruler suitable for children?

It is designed for school use but should be used under adult supervision to avoid injury from sharp edges.

Does the ruler require batteries?

No, it is a manual tool and does not require any power source.

Can I replace the ruler if damaged?

The ruler is a one-piece construction; if damaged, it is best to replace it entirely.

What is the weight of the GA-03 ruler?

It weighs approximately 50 grams.

USER MANUAL GA-03 Acme United

4 GB User's manual 67 Warranty card

9 LT Vartotojo gidas 68 Garantinis lapas

Thank you for choosing the PC Gamepad and congratulations on this decision. We are certain that product will provide much playing pleasure for years to come. These instructions contain valuable information on operating and configuring the gamepad. Keep these instructions and the software CD in a safe location for future reference.

Product features

• Double vibration for better gaming experience
• 3 position switch to quick set power of vibration
- 6 fire buttons
• 4 shoulder buttons
- Two 360°mini-joysticks with digital buttons underneath
• Eight-way direction pad (D-Pad)
• Macro function for saving actions
• Analog and digital modes supported
- USB connection
• Compatible with Windows 98SE / 2000 / ME / XP / VISTA / 7 ^M

Important safety instructions

When using electrical appliance, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING.

GB

DANGER – As with most electrical appliances, electrical parts are electrically live even when it is off. To reduce the risk of electrical shock:

1. Do not place or store appliance where it can fall.
2. Do not place in or drop into water or other liquid.
3. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

1. Do not expose the controller to high temperature, high humidity or direct sunlight. (Use in an environment between 5 – 35 °C / 41 – 95 °F).
2. Do not allow liquid or small particles to get into the controller.
3. Do not put any heavy objects on the controller.
4. Never disassemble or modify the controller.
5. Do not twist the cable or pull it forcibly.
6. Do not bend, throw or drop the controller or subject it to strong physical shock. Do not touch the metal parts or insert foreign objects in the controller.
7. Do not attempt to service or repair the device in question. Leave service work to qualified experts.
8. Do not modify the device in any way. Doing so voids the warranty.

Installation

Installing the software

1. Place enclosed driver CD into the CD-ROM drive.
2. The installation program will start automatically.
3. If this does not happen, proceed as follows: a. Go to "My Computer"

GB

b. Select your CD-ROM driver and double click it.

c. Double click the setup.exe file.

1. Follow the steps in the installation program.
2. Restart your PC.

Installing the Hardware:

1. Connect the USB cable of your gamepad to a USB port on your computer. Your operating system may prompt you to insert your Windows CD to install the new hardware components.

2. To configure the device, click:

3. Start—> Settings—> Control panel—> Game controllers

4. Please note that the "Game controllers" application is called "Game options" in Windows ME.

5. Select the required device.

6. Now click "Properties" to test and calibrate all functions in the menu, including Force Feedback.

Functions

Macro function

The PC-Gamepad allows you to save certain movement and button sequences.

To do so, proceed as follows:

1. Press the Macro button.
2. Press one of the four shoulder buttons you wish to set (buttons: 5, 6, 7 or 8), after pressing shoulder button Macro LED will start blinking.
3. You can now set the button sequence via the other buttons and the directions via the eight-way controller (D-Pad).
4. Press the Macro button again.
5. Now you can press the programmed shoulder button to perform sequence you have set.

GB

To clear the combination, press Macro, then the button which was set and then press Macro again.

Note:

Not all games can support macro function, in such case programmed sequence will not be performed.

Vibration function

The Gamepad has two internal motors which work only in games supporting “Force Feedback” function and when supplied drivers have been installed. See the manual of your game on whether the game supports vibration or not. If problems persist, check whether vibration support was activated in the game options.

Notes:

• Ensure that your game software supports game controllers.
• In order to use the vibration function, your game's software must support Force Vibration/Force Feedback.
• If some buttons do not work, check key settings in the game's options menu.

Cleaning

To clean the Game Pad, wipe with a mildly damp cloth.

• Never immerse into water, as the unit contains sensitive electronic components that may be destroyed, voiding your warranty.
  • Do not use any harsh cleaners or disinfectants on your Game Pad.
• A damp cloth with a dab of dish-washing detergent or "Computer Case and Monitor" cleaning solution available at any computer store will be sufficient.

GB

Storage

• When not in use, store your Game Pad in a dust-free area, preferably in its original packaging.
• Keep all the Game Pad components away from sources of major heat (baseboard heaters, car dashboard, etc.).
• Keep the Game Pad away from any major magnetic sources.

Troubleshooting

My game pad doesn't work

• Check the USB port to which it is connected. It is possible that USB port is dead. Try to connect another appliance to this port to find out.
• The power cord of the game pad can by damaged. Unplug the USB port from power socket and check it carefully. If it is damaged, you must give it to replace by authorized service.

My game pad drivers can't be installed

- Check if your OS is supported for this device. Supported OS list is on your game pad package.

lžanga

Olulised ohutusjuhised

Warranty card www.acme.eu/warranty

GB

Product Product model
Product purchase date Seller name, address
Failures (date, description, position of the person who accepts the product, first name, last name and signature)

1. Warranty period

Warranty enters into force starting with the day when the buyer acquires the product from the seller. Warranty period is indicated on the package of the product.

2. Warranty conditions

The warranty is valid only by providing an original document of the product acquisition and this warranty sheet, which includes name of the product model, product purchase date, name and address of the seller.

If it is noticed during the warranty period that the product has faults and these faults where not caused by any of the reasons when the warranty is not applied as indicated in the paragraphs below, manufacturer undertakes to replace the product.

The warranty is not applied to regular testing, maintenance and repair or replacement of the parts which are worn out naturally.

The warranty is not applied if damage or failures occurred due to the following reasons:

usage and/or operating the product without following the manual, technical requirements and safety standards as provided by the manufacturer, and additionally, inappropriate warehousing, falling from heights as well as hard strikes.

• Corrosion, mud, water and sand.
• Repair works, modifications or cleaning, which were performed by a service not authorised by the manufacturer.
• Usage of the spare parts, software or consumptive materials which do not apply to the product.
- Accidents or events or any other reasons which depend on the manufacturer, which includes lightning, water, fire, magnetic field and inappropriate ventilation.
- If the product does not meet standards and specifications of a particular country, in which it was not bought. Any attempt to adjust the product in order to meet technical and safety requirements such as those in the other countries withdraws all the rights to the warranty service.

If no failures are detected in the product, all the expenses in relation to the service are covered by the buyer.

• Inappropriate installation of the product, inappropriate

LT

Garantinis lapas www.acme.eu/warranty

Solid orange horizontal bar with no text or symbols

Model: GA-03

action game pad

acme®

www.acme.eu